SEARCH · Search NASA

Results for “Altitude”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

All sources NASA NTRS DOE OSTI

NASA NTRS2013

Altitude-Limiting Airbrake System for Small to Medium Scale Rockets

The goal of the overall internship opportunity this semester was to learn and practice the elements of engineering design through direct exposure to real engineering problems. The primary exposure was to design and manufacture an airbrake device for use with small-medium scale rocket applications. The idea was to take the presented concept of a solution and transform said concept into a reliable fully-functioning and reusable mechanism. The mechanism was to be designed as an insurance feature so that the overall altitude of a rocket with relatively undetermined engine capabilities does not unexpectedly exceed the imposed 10,000 foot ceiling, per range requirements. The airbrake concept was introduced to the Prototype Development Lab as a rotation-driven four tiered offset track pin mechanism, i.e. the airbrake was deployed by rotating a central shaft attached directly to the bottom plate. The individual airbrake fins were subsequently deployed using multiple plates with tracks of offset curvature. The fins were created with guide pins to follow the tracks in each of the offset plates, thus allowing the simultaneous rotational deployment of all fins by only rotating one plate. The concept of this solution was great; though it did not function in application. The rotating plates alone brought up problems like the entire back half of the rocket rotating according to the motion of the aforementioned base plate. Subsequently, the solution currently under development became a static linear actuator-driven spring-loaded fin release system. This solution is almost instantaneously triggered electronically when the avionics detect that the rocket has reached the calculated altitude of deceleration. This altitude will allow enough time remaining to the overall ceiling to adequately decelerate the rocket prior to reaching the ceiling.

Rocket University↗

NASA NTRS2016

Altitude Effects on Thermal Ice Protection System Performance; a Study of an Alternative Approach

Research has been conducted to better understand the phenomena involved during operation of an aircraft's thermal ice protection system under running wet icing conditions. In such situations, supercooled water striking a thermally ice-protected surface does not fully evaporate but runs aft to a location where it freezes. The effects of altitude, in terms of air pressure and density, on the processes involved were of particular interest. Initial study results showed that the altitude effects on heat energy transfer were accurately modeled using existing methods, but water mass transport was not. Based upon those results, a new method to account for altitude effects on thermal ice protection system operation was proposed. The method employs a two-step process where heat energy and mass transport are sequentially matched, linked by matched surface temperatures. While not providing exact matching of heat and mass transport to reference conditions, the method produces a better simulation than other methods. Moreover, it does not rely on the application of empirical correction factors, but instead relies on the straightforward application of the primary physics involved. This report describes the method, shows results of testing the method, and discusses its limitations.

ice protection system performance↗

NASA NTRS2016

Green Propellant Test Capabilities of the Altitude Combustion Stand at the NASA Glenn Research Center

The NASA Glenn Research Center (GRC) is committed to providing simulated altitude rocket test capabilities to NASA programs, other government agencies, private industry partners, and academic partners. A primary facility to support those needs is the Altitude Combustion Stand (ACS). ACS provides the capability to test combustion components at a simulated altitude up to 100,000 ft. (approx.0.2 psia/10 Torr) through a nitrogen-driven ejector system. The facility is equipped with an axial thrust stand, gaseous and cryogenic liquid propellant feed systems, data acquisition system with up to 1000 Hz recording, and automated facility control system. Propellant capabilities include gaseous and liquid hydrogen, gaseous and liquid oxygen, and liquid methane. A water-cooled diffuser, exhaust spray cooling chamber, and multi-stage ejector systems can enable run times up to 180 seconds to 16 minutes. The system can accommodate engines up to 2000-lbf thrust, liquid propellant supply pressures up to 1800 psia, and test at the component level. Engines can also be fired at sea level if needed. The NASA GRC is in the process of modifying ACS capabilities to enable the testing of green propellant (GP) thrusters and components. Green propellants are actively being explored throughout government and industry as a non-toxic replacement to hydrazine monopropellants for applications such as reaction control systems or small spacecraft main propulsion systems. These propellants offer increased performance and cost savings over hydrazine. The modification of ACS is intended to enable testing of a wide range of green propellant engines for research and qualification-like testing applications. Once complete, ACS will have the capability to test green propellant engines up to 880 N in thrust, thermally condition the green propellants, provide test durations up to 60 minutes depending on thrust class, provide high speed control and data acquisition, as well as provide advanced imaging and diagnostics such as infrared (IR) imaging.

Testing↗

NASA NTRS2017

Preliminary Evaluation of Altitude Scaling for Turbofan Engine Ice Crystal Icing

Preliminary evaluation of altitude scaling for turbofan engine ice crystal icing simulation was conducted during the 2015 LF11 engine icing test campaign in PSL.The results showed that a simplified approach for altitude scaling to simulate the key reference engine ice growth feature and associated icing effects to the engine is possible. But special considerations are needed to address the facility operation limitation for lower altitude engine icing simulation.

altitude scaling↗

NASA NTRS2017

Preliminary Evaluation of Altitude Scaling for Turbofan Engine Ice Crystal Icing

engine ice crystal icing↗

NASA NTRS2017

Altitude Scaling of Thermal Ice Protection Systems in Running Wet Operation

A study into the effects of altitude on an aircraft thermal Ice Protection System (IPS) performance has been conducted by the National Research Council Canada (NRC) in collaboration with the NASA Glenn Icing Branch. The study included tests of an airfoil model, with a heated-air IPS, installed in the NRCs Altitude Icing Wind Tunnel (AIWT) at altitude and ground level conditions.

Running wet mode↗

DOE OSTI2026

Movement Models to Predict Low‐Altitude Flight of Soaring Birds Using Look‐Ahead Environmental Factors

Advances in fine-scale movement modeling of soaring birds can aid efforts to understand and resolve the impacts of anthropogenic activities on such birds. Soaring birds often rely on underlying terrain and low-altitude updrafts to govern their flights at rotor-swept altitudes (≤ 200 m above ground level), which puts them at risk of collision with wind turbines. We developed a data-driven Markov model at 1-s resolution that predicts the fine-scale flight behavior of golden eagles (Aquila chrysaetos) as a function of ecological covariates at the current location as well as those within an eagle's line of sight. We only considered ecological covariates that are readily available in real-time (ground elevation and wind conditions). Latent factors (age, sex, species, behavioral intent, migratory status) were intentionally left out of the model. We calibrated the model using golden eagle telemetry data collected in two different ecoregions of the United States. Given a starting location, the calibrated model simulates multiple stochastic 3D paths to produce a time-explicit and spatially explicit risk map of turbine collisions. We discovered an empirical relation between the rate of change of heading and the orographic updraft conditions within an eagle's line of sight. Our model performed most effectively when predicting predominantly-soaring flights at rotor-swept altitudes during wind conditions in which turbines are likely to be operational. The calibrated model could be used in concert with automated eagle detection and turbine curtailment technologies. Specifically, once an eagle is detected by those systems, our model could then provide accurate predictions of turbines the eagle is likely to interact with in the near term.

17 WIND ENERGY↗

NASA NTRS1971

Aircraft altitude determination using multipath information in an angle-measuring navigation satellite system

In an angle-measuring navigation satellite system using a pair of crossed interferometers located on a satellite in synchronous orbit, three parameters are needed to determine a user's position unambiguously. These are the phase differences between received signals which were transmitted by the two antennas on each of the two interferometers, and the user's altitude. The two phase difference measurements yield a line of possible user locations, and the addition of the altitude measurement reduces this line to a single point. A method is proposed which makes use of the navigation signals received after reflection off the earth's surface. The iterative procedure employs the arrival time difference between direct and reflected signals. Based on previous calculations of errors in measuring the electrical parameters it is concluded that, for North Atlantic coverage and specular reflection, altitude measurements can be made with a 1-sigma error of 65 meters.

Kurjan, D.↗

NASA NTRS1972

An altitude chamber rescue ensemble

Altitude chamber tests accomplished with the astronaut crews in the spacecraft at a simulated altitude of above 200,000 ft requires that a rescue team be provided in the event of an accident in the spacecraft. The rescue crew is stationed in an airlock maintained at an altitude of 18,000 ft. A protective ensemble provides the rescue crew with life support capabilities, communications, and protection in the event of an emergency. In the event of an emergency, repressurization of the chamber is initiated; as the chamber descends, the airlock ascends and the two meet at 25,000 ft. This phase of the emergency repressurization takes less than 30 sec.

Lloyd, R. P.↗

NASA NTRS1972

Factors affecting altitude relight performance of a double-annular ram-induction combustor

A test program was conducted to evaluate the altitude relight capabilities of a short-length, double-annular, ram-induction combustor which was designed for Mach 3 cruise operation. The use of distorted inlet-air flow profiles was tried to evaluate their effect on the relight performance. No significant improvement in altitude relight performance was obtained with this approach. A study was also made to determine the effects of the reference Mach number, the fuel temperature, and the fuel volatility (ASTM-A1 against JP-4) on the altitude relight performance. Decreasing the reference Mach number, increasing the fuel temperature, and using more volatile fuel all decrease the combustor pressure necessary for relight.

Schultz, D. F.↗

NASA NTRS1971

Erythropoietic radiosensitivity of the rat during altitude acclimatization.

The effect of a sublethal dose (300 R) of X-radiation upon the erythropoietic system of the rat, during 60-day acclimatization to moderate hypoxia (3,800 m altitude), was studied. Past work has shown that hypoxic animals are damaged less by radiation than animals irradiated in a normal environment; therefore, it was postulated that if, after acclimatization to hypoxia the bone marrow oxygen tension returns to sea-level values, these animals should suffer radiation damage equivalent to animals at sea level. The principal parameters followed were the rate of depletion of injected Fe-59 from the plasma of chronically catheterized rats, and its subsequent reappearance in the circulating erythrocytes. After 20 days of acclimatization, both parameters for altitude-irradiated animals returned to the values of animals irradiated at sea level, previously having reflected increased erythropoiesis. In altitude nonirradiated animals the parameters indicated erythropoietic stimulation persisting up to 45 days acclimatization. The protective effect of the hypoxia on the stem cells vanished during acclimatization, presumably as cellular oxygen tension rose.

Gaugl, J. F.↗

NASA NTRS1971

Calibration of solar cells using high-altitude aircraft.

A high altitude airplane has been used to obtain the outer space short circuit current of solar cells. The solar cells are mounted in a collimating tube and are measured at approximately 5000 foot intervals between 12,000 and 47,000 feet. The air mass is calculated for each altitude using the standard formula and the resulting curve is extrapolated to air mass zero. The effects on the solar cell output of a haze layer located at the tropopause has been observed. It is necessary to fly above this layer to ensure accurate results. Airplane calibrations of several primary standard cells calibrated on high altitude balloons show agreement within 0.5 per cent. Prediction of the output of satellite power supplies using airplane calibrated cells shows an accuracy of better than 1 per cent.

Brandhorst, H. W., Jr.↗

NASA NTRS1972

Seasonal and altitude variations in field-aligned precipitation occurrence

Data from more than 7500 orbits of the polar-orbiting satellite OGO-4 have been analyzed to determine the existence of seasonal, altitude, or universal time differences in the occurrence of field-aligned electrons. Unexpected variations in frequency of occurrence have been found at different altitudes and in different seasons. In particular, the probability of observing this phenomenon at high latitudes was found to be greatest in the winter months at the highest altitudes attained by OGO-4. A localized parallel electric field acceleration mechanism is presented which could account for the particle observations.

Berko, F. W.↗

NASA NTRS1972

Predictive modeling of altitude decompression sickness in humans

The coding of data on 2,565 individual human altitude chamber tests is reported as part of a selection procedure designed to eliminate individuals who are highly susceptible to decompression sickness, individual aircrew members were exposed to the pressure equivalent of 37,000 feet and observed for one hour. Many entries refer to subjects who have been tested two or three times. This data contains a substantial body of statistical information important to the understanding of the mechanisms of altitude decompression sickness and for the computation of improved high altitude operating procedures. Appropriate computer formats and encoding procedures were developed and all 2,565 entries have been converted to these formats and stored on magnetic tape. A gas loading file was produced.

Kenyon, D. J.↗

NASA NTRS1973

Measurement of gaseous emissions from an afterburning turbojet engine at simulated altitude conditions

Gaseous emissions from a J85-GE-13 turbojet engine were measured over a range of fuel-air ratios from idle to full afterburning and simulated altitudes from near sea-level to 12,800 meters (42,000 ft). Without afterburning, carbon monoxide and unburned hydrocarbon emissions were highest at idle and lowest at takeoff; oxides of nitrogen exhibited the reverse trend. With afterburning, carbon monoxide and unburned hydrocarbon emissions were greater than for military power. Carbon monoxide emissions were altitude dependent. Oxides of nitrogen emissions were less at minimum afterburning than at military power. For power levels above minimum afterburning, the oxides of nitrogen emissions were both power level and altitude dependent.

Diehl, L. A.↗

NASA NTRS1973

Venus wind-altitude radar study

A study was made of a wind/altitude radar for a Venus probe. The baseline configuration was taken to be the SKD-2100 Doppler radar modified to accommodate the altimeter portion of the APN-187 and a single beam antenna. Using current models of the Venus environment, engineering studies were made to define design requirements and to estimate the operational and physical characteristics of the conceptual design. The results of the study are that: (1) the radar instrument should have an altitude limit of at least 34 km for velocity and at least 17.5 km for altitude measurement, (2) vertical accuracy should be better than + or - 0.9 percent and horizontal velocity accuracy should be better than + or - 3 percent over the operating altitude range, and (3) altimeter accuracy should be within + or - 3 percent up to about 2.5 km and should improve over the remainder of the altimeter operating range. The radar is expected to require between 48.5 and 69.3 watts of power and to weigh between 3.86 and 5.21 kg (8.5 and 11.5 lb). In each case, if power could be supplied directly from the probe batteries the lower figures would apply; the upper figures would apply if a power conditioner must be used.

Goldfischer, L. I.↗

NASA NTRS1972

High altitude remote spectroscopy of the ocean.

An airborne spectrometer for measuring the spectral radiance characteristics of large bodies of water is described, and measured spectral signatures are analyzed to demonstrate the effects of sensor altitude. The contribution of backscattered light from the atmosphere becomes large at higher altitudes, particularly at the shorter wavelengths of the visible range. This reduces the contrast of the imaged scene and results in a substantial modification of the signal received by the spectrometer. The atmospheric effect on spectral data is described in some detail, and a technique is outlined for extracting pertinent information from high-altitude data.

White, P. G.↗

NASA NTRS1973

Source altitude for experiments to simulate space-to-earth laser propagation.

The bias in scintillation measurements caused by the proximity of a spherical-wave source to the turbulence region of the atmosphere is predicted, and the laser-source altitude required for meaningful experiments simulating space-to-earth laser propagation is estimated. It is concluded that the source should be located at two or more times the maximum altitude of the tropopause to ensure that all measurements are not biased by more than 25%. Thus the vehicle used for experiments of this type should be capable of reaching a minimum altitude of 32 km.

Minott, P. O.↗