Search NASA⌕ Search

SEARCH · Search NASA

Results for “Ammonia”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Removal and recovery of ammonia from simulated wastewater using Ti3C2Tx MXene in flow electrode capacitive deionization

Abstract Flowing electrode capacitive deionization systems (FE-CDI) have recently garnered attention because of their ability to prevent cross contamination and operate in uninterrupted cycles ad infinitum. Typically, FE-CDI electrodes suffer from low conductivity, reducing deionization performance. Utilization of higher mass loadings to combat this leads to poor rheological properties. Herein, Ti 3 C 2 T x MXene was introduced as 1 mg mL −1 slurry electrodes in an FE-CDI system for the removal and recovery of ammonia from simulated agricultural wastewater. The electrode performance was evaluated by operating the FE-CDI system with a feed solution of 500 mg L −1 NH 4 Cl running in batch mode at a constant voltage of 1.20 and −1.20 V in charging and discharging modes, respectively. Despite the low loading, Ti 3 C 2 T x flowing electrodes showed markedly improved performance, achieving 60% ion removal efficiency in a saturation time of 115 min with an adsorption capacity of 460 mg g −1 . To understand the high adsorption performance of the electrodes, physiochemical and structural analysis was done via a variety of characterization techniques such as SEM, TEM, XRD, DLS, and Raman spectroscopy. Cyclic voltammetry and galvanostatic charge/discharge profiles were obtained to evaluate the electrochemical properties of the electrodes. The system proved to be an energy-saving technology by exhibiting a charge efficiency of 58–70% while operating at an energy consumption of 0.45 kWh kg −1 . A 92% regeneration efficiency showed that the electrodes were stable and suitable for long term and scalable usage. The results demonstrate that MXenes have the potential to improve the FE-CDI process for energy-efficient removal and recovery of ammonia.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Hydrogen generation via ammonia decomposition on highly efficient and stable Ru-free catalysts: approaching complete conversion at 450 °C

We report Hydrogen (H 2 ) is a prospective zero-carbon and high-energy-density fuel alternative to fossil fuels for generating power and clean energy. Ammonia (NH 3 ) is a promising H 2 (17.7%) carrier, which can easily overcome the challenges associated with H 2 storage and transportation. Thermocatalytic ammonia decomposition reaction (ADR) is an effective way to produce clean H 2 but it relies on the use of expensive and rare ruthenium (Ru)-based catalysts at elevated temperatures (>500 °C), hence is not sustainable and economically feasible. Herein, we report a synergistic strategy to design a heterostructured Ru-free catalyst, consisting of CoNi alloy nanoparticles well-dispersed on a MgO–CeO 2 –SrO mixed oxide support with potassium promotion. The resulting K–CoNi alloy –MgO–CeO 2 –SrO catalyst presents 97.7% and 87.5% NH 3 conversion efficiency at 450 °C at gas hourly space velocities (GHSVs) of 6000- and 12 000-mL h -1 g cat -1 , respectively. At 500 °C, the H 2 production rate (57.75 mmol g cat -1 min -1 ) becomes comparable to that of most of the reported Ru-based catalysts. The catalyst stability has been successfully demonstrated in both a fixed-bed reactor under high pressure (120 h at 5.0 bar) and a membrane reactor prototype (600 h at 1.5 bar) at 500 °C. High-temperature in situ XPS analysis, temperature-programmed desorption/reduction, and density functional theory calculations have been carried out to elucidate the possible active sites and performance enhancement mechanisms. This work highlights the importance of constructing optimal interfaces between active metal nanoparticles and oxide support for boosting the NH 3 to H 2 conversion efficiency and long-term stability.

25 ENERGY STORAGE↗
DOE OSTI2022

Reaction mechanism and kinetics for N 2 reduction to ammonia on the Fe–Ru based dual-atom catalyst

Environmental and energy considerations demand that the Haber-Bosch process for reducing N 2 to NH 3 be replaced with electrochemical ammonia synthesis where the H atoms come from water instead of from H 2 . But a practical realization of electrochemical N 2 reduction reaction (NRR) requires the development of new generation electrocatalysts with low overpotential and high Faraday efficiency (FE). A major problem here is that the hydrogen evolution reaction (HER) competes with NRR. Herein, we consider new generation dual-site catalysts involving two different metals incorporated into a novel two-dimensional C 3 N–C 2 N heterostructure that provides a high concentration of well-defined but isolated active sites that bind two distinct metal atoms in a framework that facilitates electron transfer. We report here the mechanism and predicted kinetics as a function of applied potential for both NRR and HER for the (Fe–Ru)/C 3 N–C 2 N dual atom catalyst. These calculations employ the grand canonical potential kinetics (GCP-K) methodology to predict reaction free energies and reaction barriers as a function of applied potential. The rates are then used in a microkinetic model to predict the turn-over-frequencies (TOF) as a function of applied potential. At U = 0 V, the FE for NRR is 93%, but the current is only 2.0 mA cm –2 . The onset potential (at 10 mA cm –2 ) for ammonia on Fe–Ru/C 3 N–C 2 N is –0.22 V RHE . This leads to a calculated TOF of 434 h –1 per Fe–Ru site. In conclusion, we expect that the mechanisms for NRR and HER developed here will help lead to new generations of NRR with high TOF and FE.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

In situ formed catalysts for active, durable, and thermally stable ammonia protonic ceramic fuel cells at 550 °C

Ammonia protonic ceramic fuel cells (NH 3 -PCFCs) are promising and attractive energy-conversion devices owing to their high energy density, zero-carbon emission, and safety. The development of NH 3 -PCFCs, however, depends largely on the insufficient activity and poor durability of typical Ni-based anodes for ammonia decomposition, especially at low temperatures such as 550 °C. Herein, we report a self-assembled heterostructured Ru 0.95 Cu 0.05 Ni x (RCN) catalyst obtained through an in situ reaction between the surface-decorated Ru 0.95 Cu 0.05 nanoparticles and the Ni grain in the anode under typical processing conditions. At 550 °C, Ni–BaZr 0.1 Ce 0.7 Y 0.1 Yb 0.1 O 3 anode-supported PCFCs with RCN catalysts exhibit a high peak power density of 0.732 W cm -2 and a significantly enhanced durability of 100 h in NH 3 . Moreover, the cells demonstrate improved thermal stability compared with the bare cell during a 31-cycle thermal cycling test in NH 3 between 550 and 700 °C. In conclusion, the enhanced performance is likely attributed to the synergistic effects of Ru and Cu in RCN for NH 3 decomposition, resulting in a more vital interaction of NH 3 than that of the bare anode surfaces, as confirmed by NH 3 thermal conversion, electrochemical performance, and theoretical simulations.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2024

Dynamics and activity of an ammonia-oxidizing archaea bloom in South San Francisco Bay

Abstract Transient or recurring blooms of ammonia-oxidizing archaea (AOA) have been reported in several estuarine and coastal environments, including recent observations of AOA blooms in South San Francisco Bay. Here, we measured nitrification rates, quantified AOA abundance, and analyzed both metagenomic and metatranscriptomic data to examine the dynamics and activity of nitrifying microorganisms over the course of an AOA bloom in South San Francisco Bay during the autumn of 2018 and seasonally throughout 2019. Nitrification rates were correlated with AOA abundance in quantitative polymerase chain reaction (PCR) data, and both increased several orders of magnitude between the autumn AOA bloom and spring and summer seasons. From bloom samples, we recovered an extremely abundant, high-quality Candidatus Nitrosomarinus catalina-like AOA metagenome-assembled genome that had high transcript abundance during the bloom and expressed >80% of genes in its genome. We also recovered a putative nitrite-oxidizing bacteria metagenome-assembled genome from within the Nitrospinaceae that was of much lower abundance and had lower transcript abundance than AOA. During the AOA bloom, we observed increased transcript abundance for nitrogen uptake and oxidative stress genes in non-nitrifier metagenome-assembled genomes. This study confirms AOA are not only abundant but also highly active during blooms oxidizing large amounts of ammonia to nitrite—a key intermediate in the microbial nitrogen cycle—and producing reactive compounds that may impact other members of the microbial community.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

A Modeling Study on Ammonia and Ammonia/Hydrogen Kinetics for Gas Turbine Engines

The use of ammonia as a fuel source in gas turbine engine power cycles represents an attractive means to decarbonize the energy sector due to higher energy density and achieving liquid state at far lower pressures compared to pure hydrogen. However, due to low flammability and a propensity for high NOx emissions, its use is not without challenge. Here, a number of 0D and 1D modeling tools were utilized to study the combustion characteristics of ammonia and ammonia/hydrogen mixtures, examining basic fundamental properties such as laminar flame speed, variability among existing chemical kinetic mechanisms, and considering the use of two-stage rich-lean combustion strategies to achieve low NOx emissions.

42 ENGINEERING↗
DOE OSTI2025

Emissions Characterization for Ammonia Fuel Blends in an Enclosed Swirl-Stabilized Diffusion Burner

This study investigates ammonia flames using the enclosed Sydney swirl burner (ESSB), focusing on detailed global emissions measurements. Emissions were measured via Fourier-transform-infrared (FTIR) spectrometer, utilizing a heated, long-path absorption cell. Hot, wet measurements of pertinent species were collected, and concentrations were determined via lineshape fitting in conjunction with the HITRAN database. Results show that partially cracked ammonia compositions yield lower emissions compared to pure NH3/H2, and small amounts of NH3 addition to CH4-containing fuel blends exhibit high levels of NOx and CO, with measurable HCN and unburnt CH4. Equilibrium calculations suggest trade-offs between chemical timescale, heat loss, and mixing. Future work will explore emissions sampling procedures and expand analysis using chemical reactor network modelling.

ammonia combustion↗
DOE OSTI2024

Core Model Proposal #389: Ammonia Trade and Miscellaneous GCAM 7.0 Bugfixes

This proposal re-structures the N fertilizer sector in the model, replacing the trade structure which was implemented before GCAM had the capability to trade secondary goods between regions, and re-naming the production commodity "ammonia" in order to better set up the model for representing ammonia as an energy carrier in subsequent work. Several bugfixes for GCAM 7.0 are also included in the proposal.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

1D Simulation of Avalanche to Streamer to Spark Transition of Plasma Discharge in Ammonia-Air Combustion

The backward problem of plasma assisted combustion emphasizes evaluating the effect of the evolving thermochemical state on the plasma discharge. This paper investigates the dependence of avalanche to streamer to spark formation dynamics and kinetics on the gas composition and temperature at different points in an ammonia-air premixed laminar flame using a self-consistent multigrid-based 1D plasma solver. Different values of ..alpha.., the coefficient for effective ionization events per unit length, have been reported for electron avalanches in air and stoichiometric NH3-air mixtures. The streamer inception has been shown to obey the Meek's criterion. An exponential reduction in streamer and spark formation time has been observed from plasma simulations at different points in the unburnt, pre-heat zone, reaction zone and the fully burnt regions of the premixed flame. While the enhancement of the reduced electric field with increasing temperature affects effective ionization, there exists a minimum breakdown field for streamer formation, which does not vary proportionally with the changing number density of the gas. The change in the mixture from reactants (NH3, O2, N2) to products of complete combustion of ammonia in air (N2, H2O) has also been shown to affect the streamer and spark formation. Finally, the major pathways during the streamer and spark phases which are responsible for producing important radicals used in combustion of NH3 are also discussed.

ADVANCED PROPULSION SYSTEMS,INORGANIC, ORGANIC, PH↗
DOE OSTI2024

Promoted Ru/PrOx Catalysts for Mild Ammonia Synthesis

Ammonia synthesis is one of the most important chemical reactions. Due to thermodynamic restrictions and the reaction requirements of the current commercial iron catalysts, it is also one of the worst reactions for carbon dioxide emissions and energy usage. Ruthenium-based catalysts can substantially improve the environmental impact as they operate at lower pressures and temperatures. In this work, we provide a screening of more than 40 metals as possible promoter options based on a Ru/Pr2O3 catalyst. Cesium was the best alkali promoter and was held constant for the series of double-promoted catalysts. Ten formulations outperformed the Ru-Cs/PrOx benchmark, with barium being the best second promoter studied and the most cost-effective option. Designs of experiments were utilized to optimize both the pretreatment conditions and the promoter weight loadings of the doubly promoted catalyst. As a result, optimization led to a more than five-fold increase in activity compared to the unpromoted catalyst, therefore creating the possibility for low-ruthenium ammonia synthesis catalysts to be used at scale. Further, we have explored the roles of promoters using kinetic analysis, X-ray Photoelectron Spectroscopy (XPS), and in situ infrared spectroscopy. Here, we have shown that the role of barium is to act as a hydrogen scavenger and donor, which may permit new active sites for the catalyst, and have demonstrated that the associative reaction mechanism is likely used for the unpromoted Ru/PrOx catalyst with hydrogenation of the triple bond of the dinitrogen occurring before any dinitrogen bond breakage.

Chemistry↗
DOE OSTI2020

Surface-Controlled Conversion of Ammonia Borane from Boron Nitride

“One-pot regeneration”, which is simple regneneration method of ammonia borane (AB) using hydrazine and liquid ammonia, enables conversion of AB from hexagonal boron nitride (h-BN) after milling hydrogenation. Solution 11 B-NMR revealed the presence of AB after NH 3 /N 2 H 4 treatment of milled h-BN (BNH x ) although the yield of AB was less than 5%. The conversion mechanism was clarified as B-H bonds on the h-BN surface created by ball-milling under hydrogen pressure have an ability to form AB, which was confirmed by Thermogravimetry-Residual Gas Analysis (TG-RGA) and Infrared (IR) analysis. The reaction routes are also the same as regeneration route of polyborazylene because intermediates of AB such as (B(NH 2 ) 3 and hydrazine borane were found by solution 11 B-NMR after soaking BNH x in liquid NH 3 and hydrazine, respectively. Because of the fact that all reactions proceed on the h-BN surface and no reaction proceeds when neat h-BN is treated, breaking of B 3 N 3 ring structure and then creation of B-H bond is the key issue to increase conversion yield of AB.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Extinction of Premixed Counterflow Ammonia-Air Flames

The effects of radiative heat loss and pressure on premixed counterflow ammonia-air flames have been investigated as a function of equivalence ratio. Non-adiabatic counterflow premixed flame simulations incorporating detailed chemistry, transport and radiative heat transfer in the optically thin limit have been employed to elucidate important underlying physics and extinction characteristics. Non-adiabatic counterflow premixed computations show that the combined effects of positive flame stretch and radiative heat loss for sub-unity Lewis number mixtures lead to the extension of the lean flammability limit for ammonia-air flames, revealing a C-shaped curve near the lean flammability limit that exhibits both radiative-induced and stretch-induced extinction states. The computations compare favorably with the experimentally determined extinction stretch rate values for the stretch-induced extinction states over a wide range of equivalence ratios at different pressures up to 6 atm.

10 SYNTHETIC FUELS↗
DOE OSTI2025

Optimization of a Secondary Air Injector for a Rich-Quench-Lean (RQL) Ammonia Combustor Using Computational Fluid Dynamics

Ammonia has emerged as a promising medium for moving hydrogen around the globe due to its energy density, existing infrastructure for production, transportation, and storage, and multiple applications from fertilizer to power generation. However, one of the most significant challenges with ammonia combustion for power generation is the formation of nitrogen oxides (NOx) during combustion. Several combustion strategies have been developed to minimize the formation of NOx. One such strategy, known as rich-quench-lean (RQL), is a method that combusts NH3 in a fuel-rich environment, followed by a quick mix section and a lean burnout section. Rapid mixing of secondary air before lean burnout is thought to be important to minimize the formation of NOx. A genetic algorithm (GA) is used to parametrically vary the secondary air injector design, including the diameter, count, and angles over a constrained design space. The designs are evaluated using a non-reacting OpenFOAM model, with the objective function being the uniformity index of the secondary air (modeled as a scalar). Optimization campaigns show that traditional correlation-based designs might not be adequate. After running 414 OpenFOAM models, the optimal design is 32, 1 mm diameter, angled air injectors, increasing the uniformity index at the outlet of the quick mix zone by 36.8%. The most promising designs will be manufactured and tested in a small RQL burner setup, which is expected to lead to validation and insight into the practical usage of NH3 combustion for power generation.

ammonia combustion↗
DOE OSTI2022

Creating Frustrated Lewis Pairs in Defective Boron Carbon Nitride for Electrocatalytic Nitrogen Reduction to Ammonia

Abstract The electrocatalytic nitrogen reduction reaction (NRR) on metal‐free catalysts is an attractive alternative to the industrial Haber–Bosch process. However, the state‐of‐the‐art metal‐free electrocatalysts still suffer from low Faraday efficiencies and low ammonia yields. Herein, we present a molecular design strategy to develop a defective boron carbon nitride (BCN) catalyst with the abundant unsaturated B and N atoms as Lewis acid and base sites, which upgrades the catalyst from a single “Lewis acid catalysis” to “frustrated Lewis pairs (FLPs) catalysis.” 14 N 2 / 15 N 2 exchange experiments and density functional theory (DFT) calculations reveal that FLPs can adsorb an N 2 molecule to form a six‐membered ring intermediate, which enables the cleavage of N 2 via a pull–pull effect, thereby significantly reducing the energy barrier to −0.28 eV. Impressively, BCN achieves a high Faraday efficiency of 18.9 %, an ammonia yield of 20.9 μg h −1 mg −1 cat. , and long‐term durability.

Lin, Wenwen↗
DOE OSTI2022

Creating Frustrated Lewis Pairs in Defective Boron Carbon Nitride for Electrocatalytic Nitrogen Reduction to Ammonia

Abstract The electrocatalytic nitrogen reduction reaction (NRR) on metal‐free catalysts is an attractive alternative to the industrial Haber–Bosch process. However, the state‐of‐the‐art metal‐free electrocatalysts still suffer from low Faraday efficiencies and low ammonia yields. Herein, we present a molecular design strategy to develop a defective boron carbon nitride (BCN) catalyst with the abundant unsaturated B and N atoms as Lewis acid and base sites, which upgrades the catalyst from a single “Lewis acid catalysis” to “frustrated Lewis pairs (FLPs) catalysis.” 14 N 2 / 15 N 2 exchange experiments and density functional theory (DFT) calculations reveal that FLPs can adsorb an N 2 molecule to form a six‐membered ring intermediate, which enables the cleavage of N 2 via a pull–pull effect, thereby significantly reducing the energy barrier to −0.28 eV. Impressively, BCN achieves a high Faraday efficiency of 18.9 %, an ammonia yield of 20.9 μg h −1 mg −1 cat. , and long‐term durability.

Lin, Wenwen↗
DOE OSTI2025

Biotransformation of Phenolics in Spent Liquor from Aqueous Ammonia Pretreatment

Spent liquors of biomass pretreatment provide a source for renewable chemical production. These liquors require treatment before being discharged; otherwise, they negatively impact the environment. Herein, spent liquors from aqueous ammonia pretreatment of poplar wood are characterized for phenolic content via liquid chromatography–mass spectrometry and nuclear magnetic resonance spectroscopy. The main phenolics are phenol, p-hydroxybenzamide (pHBAm), and p-hydroxybenzoic acid (pHBA), of which pHBAm and pHBA are produced from the ester-linked p-hydroxybenzoates in poplar wood. Phenol is produced from pHBA via decarboxylation. The potential biotransformation of the extracted phenolics into 2-pyrone-4,6-dicarboxylic acid (PDC) is assessed using an engineered strain of Novosphingobium aromaticivorans DSM12444 (PDC strain). Biotransformation of pHBAm to PDC is shown to be possible in the presence of pHBA, but not when pHBAm is the sole phenolic substrate, this is the first reported observation of N. aromaticivorans producing PDC from an aromatic amide. The phenol present is not transformed to PDC and does not inhibit PDC production. This study demonstrates that the phenolic amide in spent liquor from ammonia pretreatment can be valorized via biotransformation using N. aromaticivorans, which adds to the growing versatility of N. aromaticivorans as a microbial chassis for converting plant-derived compounds to useful products.

biomass↗
DOE OSTI2025

Integration of CO 2 capture and microalgae cultivation: demonstration assessment of outdoor Scenedesmus acutus cultivation using gaseous ammonia as a nitrogen source

Towards the goal of integrating CO 2 capture using aqueous ammonia with its utilization for algae cultivation, Scenedesmus acutus (UTEX B72) was grown in 1100 L open raceway ponds using CO 2 and NH 3 supplied from gas cylinders. CO 2 /NH 3 mole ratios of 7 and 10 were employed, the gas mixture acting as a surrogate for the output from a CO 2 scrubbing system using aqueous ammonia. Compared to Scenedesmus acutus grown in open ponds using gaseous CO 2 and NaNO 3 as the N-source, the ponds supplied with gaseous CO 2 and NH 3 displayed higher productivity at both CO 2 /NH 3 ratios, with the higher ratio providing the best growth. Depending on the culturing conditions and CO 2 /NH 3 ratio, CO 2 utilization ranged up to 15.8% and NH 3 utilization to 23.0%. These rather low values reflect the fact the high CO 2 /NH 3 feed rate used, resulting in a substantial release of NH 3 from the ORPs (~45%). Finally, these findings demonstrate the suitability of gaseous NH 3 as a N-source for microalgae cultivation, while highlighting the need for a control strategy that closely balances the CO 2 /NH 3 supply with the algae growth rate. The produced algae biomass possessed a high protein and low ash content, rendering it particularly suitable for use as a bioplastic feedstock.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Atomically Dispersed Single Ni Site Catalysts for Nitrogen Reduction toward Electrochemical Ammonia Synthesis Using N 2 and H 2 O

Ammonia (NH 3 ) electrosynthesis gains significant attention as NH 3 is essentially important for fertilizer production and fuel utilization. However, electrochemical nitrogen reduction reaction (NRR) remains a great challenge because of low activity and poor selectivity. Herein, a new class of atomically dispersed Ni site electrocatalyst is reported, which exhibits the optimal NH 3 yield of 115 µg cm -2 h -1 at –0.8 V versus reversible hydrogen electrode (RHE) under neutral conditions. High faradic efficiency of 21 ± 1.9% is achieved at -0.2 V versus RHE under alkaline conditions, although the ammonia yield is lower. The Ni sites are stabilized with nitrogen, which is verified by advanced X-ray absorption spectroscopy and electron microscopy. Density functional theory calculations provide insightful understanding on the possible structure of active sites, relevant reaction pathways, and confirm that the Ni-N 3 sites are responsible for the experimentally observed activity and selectivity. Extensive controls strongly suggest that the atomically dispersed NiN 3 site-rich catalyst provides more intrinsically active sites than those in N-doped carbon, instead of possible environmental contamination. Overall, this work further indicates that single-metal site catalysts with optimal nitrogen coordination is very promising for NRR and indeed improves the scaling relationship of transition metals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗