Search NASA⌕ Search

SEARCH · Search NASA

Results for “BASIC INTERACTIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Observation of wave-wave interactions in the stratosphere

Data from the LIMS instrument for January 1979 are used to provide further evidence for the often observed vacillation between the amplitudes of waves 1 and 2 in the stratosphere. The vacillation is shown to result primarily from nonlinear wave-wave interactions within the stratosphere. Two ways of interpreting nonlinearity are discussed. In the first, the basic state is defined to include large amplitude waves as well as the mean zonal wind. A forced wave propagates with respect to this asymmetric basic state, which can lead to changes in the conventional zonal wavenumber measured at one latitude. The other view of nonlinearity, interaction of wave with the zonal flow and with other wavenumbers are considered separately. Wave-wave interactions among waves 1, 2 and 3 are calculated. The derivation and computation of wave-wave interaction terms in the potential enstrophy balance are given. The observations indicate that enstrophy transfer among waves can be substantial even when the amplitude of one of the contributing waves is small. The computed enstrophy balance also demonstrates that wave-wave interactions can have a large effect on the interaction of waves with the mean flow.

Smith, A. K.↗

Lessons from an evolving rRNA: 16S and 23S rRNA structures from a comparative perspective

The 16S and 23S rRNA higher-order structures inferred from comparative analysis are now quite refined. The models presented here differ from their immediate predecessors only in minor detail. Thus, it is safe to assert that all of the standard secondary-structure elements in (prokaryotic) rRNAs have been identified, with approximately 90% of the individual base pairs in each molecule having independent comparative support, and that at least some of the tertiary interactions have been revealed. It is interesting to compare the rRNAs in this respect with tRNA, whose higher-order structure is known in detail from its crystal structure (36) (Table 2). It can be seen that rRNAs have as great a fraction of their sequence in established secondary-structure elements as does tRNA. However, the fact that the former show a much lower fraction of identified tertiary interactions and a greater fraction of unpaired nucleotides than the latter implies that many of the rRNA tertiary interactions remain to be located. (Alternatively, the ribosome might involve protein-rRNA rather than intramolecular rRNA interactions to stabilize three-dimensional structure.) Experimental studies on rRNA are consistent to a first approximation with the structures proposed here, confirming the basic assumption of comparative analysis, i.e., that bases whose compositions strictly covary are physically interacting. In the exhaustive study of Moazed et al. (45) on protection of the bases in the small-subunit rRNA against chemical modification, the vast majority of bases inferred to pair by covariation are found to be protected from chemical modification, both in isolated small-subunit rRNA and in the 30S subunit. The majority of the tertiary interactions are reflected in the chemical protection data as well (45). On the other hand, many of the bases not shown as paired in Fig. 1 are accessible to chemical attack (45). However, in this case a sizeable fraction of them are also protected against chemical modification (in the isolated rRNA), which suggests that considerable higher-order structure remains to be found (although all of it may not involve base-base interactions and so may not be detectable by comparative analysis). The agreement between the higher-order structure of the small-subunit rRNA and protection against chemical modification is not perfect, however; some bases shown to covary canonically are accessible to chemical modification (45).(ABSTRACT TRUNCATED AT 400 WORDS).

Review↗

Determining the Probability of Violating Upper-Level Wind Constraints for the Launch of Minuteman III Ballistic Missiles at Vandenberg Air Force Base

The 30th Operational Support Squadron Weather Flight (30 OSSWF) provides comprehensive weather services to the space program at Vandenberg Air Force Base (VAFB) in California. One of their responsibilities is to monitor upper-level winds to ensure safe launch operations of the Minuteman Ill ballistic missile. The 30 OSSWF tasked the Applied Meteorology Unit (AMU) to analyze VAFB sounding data with the goal of determining the probability of violating (PoV) their upper-level thresholds for wind speed and shear constraints specific to this launch vehicle, and to develop a tool that will calculate the PoV of each constraint on the day of launch. In order to calculate the probability of exceeding each constraint, the AMU collected and analyzed historical data from VAFB. The historical sounding data were retrieved from the National Oceanic and Atmospheric Administration Earth System Research Laboratory archive for the years 1994-2011 and then stratified into four sub-seasons: January-March, April-June, July-September, and October-December. The AMU determined the theoretical distributions that best fit the maximum wind speed and maximum wind shear datasets and applied this information when calculating the averages and standard deviations needed for the historical and real-time PoV calculations. In addition, the AMU included forecast sounding data from the Rapid Refresh model. This information provides further insight for the launch weather officers (LWOs) when determining if a wind constraint violation will occur over the next few hours on the day of launch. The AMU developed an interactive graphical user interface (GUI) in Microsoft Excel using Visual Basic for Applications. The GUI displays the critical sounding data easily and quickly for LWOs on day of launch. This tool will replace the existing one used by the 30 OSSWF, assist the LWOs in determining the probability of exceeding specific wind threshold values, and help to improve the overall upper winds forecast for the launch customer. This presentation will describe how the AMU calculated the historical and real-time PoV values for the specific upper-level wind launch constraints and outline the development of the interactive GUI display.

Shafer, Jaclyn A.↗

RCS jet-flow field interaction effects on the aerodynamics of the space shuttle orbiter

A study was conducted to determine the external effects caused by operation of the reaction control system during entry of the space shuttle orbiter. The effects of jet plume-external flow interactions were emphasized. Force data were obtained for the basic airframe characteristics plus induced effects when the reaction control system is operating. Resulting control amplification and/or coupling were derived and their effects on the aerodynamic stability and control of the orbiter and the reaction control system thrust were determined.

Rausch, J. R.↗

Multispectral data analysis: LARSYS III

System uses pattern recognition and interactive data handling techniques applied to remotely sensed data. Basic analysis concept consists of locating data points which are believed to be representative of classes of interest.

Landgrebe, D. A.↗

The LSLE echocardiograph - Commercial hardware aboard Spacelab

The Life Sciences Laboratory Equipment Echocardiograph, a commercial 77020AC Ultrasound Imaging System modified to meet NASA's spacecraft standards, is described. The assembly consists of four models: display and control, scanner, scan converter, and physioamplifiers. Four separate processors communicate over an IEE-488 bus, and the system has more than 6000 individual components on 35 printed circuit cards. Three levels of self test are provided: a short test during power up, a basic test initiated by a front panel switch, and interactive tests for specific routines. Default mode operation further enhances reliability. Modifications of the original system include the replacement of ac power supplies with dc to dc converters, a slide-out keyboard (to prevent accidental operation), Teflon insulated wire, and additional shielding for the ultrasound transducer cable.

Schwarz, R.↗

Study of statis and dynamic stress effects in nonlinear solids

As the basic physical principles behind the low-field magnetoacoustic interactions have been unfolded, a new step in the present research had to be taken. First, the stress measurements began in samples obtained in real railroad wheel and rail materials. Second, the effect of texture, which is the prime obstacle of conventional NDE techniques, has been investigated. The first stage shows experimental results on these subjects again confirmed that the present technique is most suited for nondestructive stress characterization in steel components. The stress effects on the magnetoacoustic interaction obtained in a sample made from railroad rail which were very similar to those obtained previously in 1045 steel. These results being somewhat different from the results with low (1020) and high (1095) carbon steels, there seemed to be certain range of medium carbon steels having the same characteristics. Also, as expected from the model, the stress information obtained by this technique has been confirmed to be least affected by the presence of texture.

Namkung, M.↗

Broadband noise of propellers and rotors

Three categories of rotor noise (discrete frequency noise, impulsive noise, and broadband noise) are described and a study made of broadband noise is reported. Broadband noise has a continuous spectrum and is caused by disturbances which are not precisely repeated at each blade revolution but are basically due to some sort of turbulence-blade interactions. Source mechanisms include: inflow turbulence noise, boundary layer trailing edge noise, tip vortex noise, and several uncommon mechanisms. Broadband noise analyses are reviewed and calculations based on various analyses are compared to each other and to some available experimental data. Several satisfactory analyses are discussed and their limitations are delineated. Twenty-two references are cited.

George, A. R.↗

Development of Land Analysis System display modules

The Land Analysis System (LAS) display modules were developed to allow a user to interactively display, manipulate, and store image and image related data. To help accomplish this task, these modules utilize the Transportable Applications Executive and the Display Management System software to interact with the user and the display device. The basic characteristics of a display are outlined and some of the major modifications and additions made to the display management software are discussed. Finally, all available LAS display modules are listed along with a short description of each.

Gordon, Douglas↗

A comparative overview of modal testing and system identification for control of structures

This paper presents a comparative overview of the disciplines of modal testing used in structural engineering and system identification used in control theory. A list of representative references from both areas is given and the basic methods are briefly described. Recent progress on the interaction of modal testing and control disciplines is discussed. It is concluded that combined efforts of researchers in both disciplines are required for unification of modal testing and system identification methods for control of flexible structures.

Juang, Jer-Nan↗

A comparative overview of modal testing and system identification for control of structures

A comparative overview is presented of the disciplines of modal testing used in structural engineering and system identification used in control theory. A list of representative references from both areas is given, and the basic methods are described briefly. Recent progress on the interaction of modal testing and control disciplines is discussed. It is concluded that combined efforts of researchers in both disciplines are required for unification of modal testing and system identification methods for control of flexible structures.

Juang, J.-N.↗

The Surface Wave Dynamics Experiment (SWADE)

The Surface Wave Dynamics Experiment is designed to provide the basic data needed to understand the wind-wave interactions in the open ocean. During the period of October 1990 through March 1991 two discus, four meteorological buoys, and several other specialized buoys will collect continuous in-situ data. During three intensive periods of study, several aircraft and an airship will collect synoptic data from the study area in the Atlantic east of the Wallops Flight Facility. Data from the buoys will be collected by aircraft and ARGOS data links. Instrumentation descriptions as well as preliminary data from the first intensive study period are presented.

Mollo-Christensen, Erik↗

Autonomy for SOHO Ground Operations

The SOLAR and HELIOSPHERIC OBSERVATORY (SOHO) project [SOHO Web Page] is being carried out by the European Space Agency (ESA) and the US National Aeronautics and Space Administration (NASA) as a cooperative effort between the two agencies in the framework of the Solar Terrestrial Science Program (STSP) comprising SOHO and other missions. SOHO was launched on December 2, 1995. The SOHO spacecraft was built in Europe by an industry team led by Matra, and instruments were provided by European and American scientists. There are nine European Principal Investigators (PI's) and three American ones. Large engineering teams and more than 200 co-investigators from many institutions support the PI's in the development of the instruments and in the preparation of their operations and data analysis. NASA is responsible for the launch and mission operations. Large radio dishes around the world, which form NASA's Deep Space Network (DSN), are used to track the spacecraft beyond the Earths orbit. Mission control is based at Goddard Space Flight Center in Maryland. The agent group at the NASA Goddard Space Flight Center, in collaboration with JPL, is currently involved with the design and development of an agent-based system to provide intelligent interactions with the control center personnel for SOHO. The basic approach that is being taken is to develop a sub-community of agents for each major subsystem of SOHO and to integrate these sub-communities into an overall SOHO community. Agents in all sub-communities will be capable of advanced understanding (deep reasoning) of the associated spacecraft subsystem.

Truszkowski, Walt↗

Learning Effectiveness of the NASA Digital Learning Network

Student participation in actual investigations which develop inquiry and intellectual skills has long been regarded as an essential component of science instructions (Schwab, 1962; White, 1999). Such investigations give students an opportunity to appreciate the spirit of science and promote an understanding of the nature of science. However, classroom research conducted over the past 20 years describes science teaching as primarily teacher centered. Typical instruction consists of whole class, noninteractive activities in which individual seatwork has constituted the bulk of classroom interactions (Tobin and Gallagher, 1997). Students typically learn science from textbooks and lectures. Their main motivation is to do reasonably well on tests and examinations (Layman, 1999). During the past five years, infrastructure constraints have reduced to the point that many schools systems can now afford low cost, high quality video conferencing equipment (International Society for Technology in Education, 2003). This study investigates the use of interactive video conferencing vs. face to face interaction with hands-on, inquiry based activities. Some basic questions to be addressed are: How does the delivery method impact the students understanding of the goals of the experiment? Are students explanation of the strategies of experimentation different based on the method of instruction that was provided. Do students engaged in a workshop with the instructor in the room vs. an instructor over video conferencing have different perception of the understanding of the subject materials?

Hix, Billy↗

Designing High Speed Printed Circuit Boards Using DxDesigner and Expedition

Mentor's DxDesigner and Expedition schematic capture and printed circuit board tools were chosen to implement a custom high speed signal processing board containing many high pin count Field Programmable Gate Arrays and many high speed serial connections with data rates over 2 Gigasamples/sec. The methodology used to place the parts and route the board involved the interaction of both the DxDesigner and Expedition tools. The basic design philosophy was to specify as much as possible through design constraints at the schematic level. This paper will explore implementing that philosophy in both tools to facilitate part placement and trace routing.

printed circuit boards↗

Astronaut Office Scheduling System Software

AOSS is a highly efficient scheduling application that uses various tools to schedule astronauts weekly appointment information. This program represents an integration of many technologies into a single application to facilitate schedule sharing and management. It is a Windows-based application developed in Visual Basic. Because the NASA standard office automation load environment is Microsoft-based, Visual Basic provides AO SS developers with the ability to interact with Windows collaboration components by accessing objects models from applications like Outlook and Excel. This also gives developers the ability to create newly customizable components that perform specialized tasks pertaining to scheduling reporting inside the application. With this capability, AOSS can perform various asynchronous tasks, such as gathering/ sending/ managing astronauts schedule information directly to their Outlook calendars at any time.

Brown, Estevancio↗

Skin friction measurements by laser interferometry in swept shock wave/turbulent boundary-layer interactions

The laser interferometric skin friction meter was used to measure wall shear stress distributions in two interactions of fin-generated swept shock waves with turbulent boundary layers. The basic research configuration was an unswept sharp-leading-edge fin of variable angle mounted on a flatplate. The results indicate that such measurements are practical in high-speed interacting flows, and that a repeatability of + or - 6 percent or better is possible. Marked increases in wall shear were observed in both swept interactions tested.

Kim, Kwang-Soo↗

Electrodynamics of solar wind-magnetosphere-ionosphere interactions

The paper presents a coherent picture of fundamental physical processes in three basic elements of the solar-wind/magnetosphere/ionosphere coupling system: (1) the field-aligned potential structure which leads to the formation of auroral arcs, (2) the magnetosphere-ionosphere coupling which leads to the onset of magnetospheric substorms, and (3) the solar-wind/magnetosphere dynamo which supplies the power driving various magnetospheric processes. Process (1) is forced into existence by the loss-cone constriction effect when the upward field-aligned current density exceeds the loss-cone thermal flux limit. Substorm onset occurs when the ionosphere responds fully to the enhanced magnetospheric convection driven by the solar wind. Energy is transferred from the solar wind to the magnetosphere by a dynamo process, primarily on open field lines.

Kan, Joseph R.↗