Search NASA⌕ Search

SEARCH · Search NASA

Results for “Band structure methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Impact of Point Defects on Electronic Structure in Y₂Ti₂O₇

With many technologies and applications downscaling to nanometer dimensions, the influence of single point defects on electronic structure has shown an increasingly profound impact on optical and electrical properties, and advancing fundamental understanding is critical to defect engineering and control of materials properties. In the present study, first-principles calculations based on density functional theory (DFT) are carried out to study the effects of Ti point defects on the electronic structure of Y₂Ti₂O₇. In the literature, it has been demonstrated that conventional DFT tends to produce delocalized holes and electrons in defective oxide materials due to insufficient cancellation of the self-interaction energy and underestimation of the band gap, which results in an incorrect description of the electronic structure of the system. In an effort to better understand the accuracy of DFT in describing the behavior of Y₂Ti₂O₇ with point defects, the calculated results obtained from DFT and DFT+U methods are compared, including the geometrical distortion, the localization of the defect states and the position of the defect levels in the band gap. Using DFT, distorted geometries around the Ti vacancy and interstitial are found, along with localized oxygen holes and Ti electrons, both of which compare well with the DFT+U results, suggesting that the conventional DFT can be used to describe the localization of the Ti defects in Y₂Ti₂O₇. One major difference in the DFT and DFT+U calculations is the energy position of the defect levels, for which DFT+U results in the states positioned deep in the band gap. Since the DFT+U method suffers from the dependence of the results on the empirical parameter U and no experimental results on the energy position of the defect states are available to tune this U value, care must be taken in applying DFT+U to electronic structure calculations of Y₂Ti₂O₇ with point defects. Based on the DFT method, the most preferred charge state is determined by the formation energies for charged point defects. Moving the Fermi level across the band gap has slight effects on the charge state, and the Ti vacancy and interstitial are found to be in 24 and +4 charge states, respectively.

Environmental Molecular Sciences Laboratory↗

TU-E-213-03: Tools for Ensuring Quality and Safety

Purpose: To develop the first 4D robust optimization (RO) method accounting for respiratory motion and evaluate its potential to improve plan robustness and optimality compared to 3D RO and PTV-based optimization. Methods: A set of 4D CT images are used to track respiratory motion and deformation of tumors and organs. For each of 10 respiration phases, dose distributions for nine different uncertainty scenarios including the nominal one, those incorporating ±5mm setup uncertainties long x, y and z directions and ±3.5% range uncertainties are calculated. All 90 dose distributions are simultaneously optimized to achieve full dose coverage of 10 CTVs and sparing of normal structures. ITV-based 3D RO and PTV-based optimization based on the average CT are also carried for the same patient using same dose volume constrains. After optimization, 4D robustness evaluation was performed for all resulting plans. The CTV coverage and the sparing of normal tissue in 10 phases are evaluated and compared among the three methods. The widths of DVH bands represent the robustness of dose distributions in the structures. Results: For one patient studied so far, the worst case CTV coverage by the prescription dose among all 90 scenarios is: 99% for 4D RO; 88.9% for 3D RO, and 85.2% for PTV based optimization. 4D RO also results in best robustness with the narrowest DVH’ bandwidths for the CTV. 4D and 3D RO have similar organ sparing while PTV based optimization results in worst organ sparing. Conclusion: 4D robust optimization which accounts for anatomy motion and deformation in the optimization process, significantly improves plan robustness and achieves higher quality treatment plans for lung cancer patients. The method is being evaluated for multiple patients with different tumor and motion characteristics.

60 APPLIED LIFE SCIENCES↗

Electronic and magnetic properties of electron-doped V 2 O 5 and NaV 2 O 5

Because of its narrow split-off conduction band, doping of V 2 O 5 leads to interesting strongly correlated electrons. We study the effects of doping on V 2 O 5 's electronic and magnetic properties, either by adding electrons compensated by an artificial homogeneous background, or a virtual crystal approximation (VCA), by changing the atomic number Z V , so as to keep charge neutrality, or by explicitly introducing Na as a dopant. The former two are considered as a way to simulate injected charge by gating, the latter occurs in the vanadium bronze NaV 2 O 5 . We also simulate Na 1 - x V 2 O 5 using a virtual crystal approximation by changing the atomic number 10 ≤ Z Na ≤ 11 . The differences in the band structure, which result from how the electrons added to the band are compensated by positive charge in the three models, are compared. The electronic band structures are calculated using the quasiparticle self-consistent Q S G W method including a lattice polarization correction and the local spin density functional method with Hubbard- U corrections (LSDA+ U ). For NaV 2 O 5 , the half-filling leads to a splitting of the up- and down-spin lowest d x y band. The spins are found to prefer an antiferromagnetic ordering along the chain direction. Other spin configurations are shown to have higher energy and the exchange interactions are extracted and compared with literature. The optical conductivities are calculated and compared with experiment. Similar results are found for simply doping the band compensated by a background or virtual crystal approximation. Yet, the position of the occupied bands depends on the method chosen for compensating the charge. The most realistic way to simulate gating in which the compensating charge is kept away from the V 2 O 5 layer is the VCA with varying Z Na . The splitting between the up- and down-spin bands depends on the filling. Furthermore, we find that below a certain concentration of about 0.88 electrons per V, the FM arrangement becomes preferable over the antiferromagnetic one. The magnetic moments then gradually decrease as we lower the filling of the split-off band.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

All-electron quasiparticle self-consistent GW band structures for SrTiO 3 including lattice polarization corrections in different phases

The electronic band structure of SrTiO3 is investigated in the all-electron quasiparticle self-consistent GW (QSGW) approximation. Unlike previous pseudopotential-based QSGW or single-shot G0W0 calculations, the gap is found to be significantly overestimated compared to experiment. After putting in a correction for the underestimate of the screening by the random phase approximation in terms of a 0.8Σ approach, the gap is still overestimated. The 0.8Σ approach is discussed and justified in terms of various recent literature results including electron-hole corrections. Adding a lattice polarization correction (LPC) in the q→0 limit for the screening of W, agreement with experiment is recovered. The LPC is alternatively estimated using a polaron model. Here, we apply our approach to the cubic and tetragonal phases as well as a hypothetical layered postperovskite structure and find that the local density approximation (LDA) to GW gap correction is almost independent of structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Band gap and electronic structure of defects in the ternary nitride BP 3 N 6 : experiment and theory

Recent advances in methods to access nitride systems by a high-pressure high-temperature approach have made possible the one-step synthesis of mixed ternary non-metal nitrides. As a prerequisite to use in a practical device, it is important to understand important bulk electronic properties, such as the band gap, as well as characterizing the presence and effect of defects that are present. In this work, the novel ternary nitride BP 3 N 6 is studied using techniques sensitive to the partial electronic density of states, specifically X-ray absorption spectroscopy and X-ray emission spectroscopy. Complementary full-potential all-electron density functional theory (DFT) calculations allow important bulk electronic parameters, such as the band gap, to be elucidated. The band gap of BP 3 N 6 has been determined to be 3.9 ± 0.2 eV and 4.1 ± 0.4 eV at the B K- and N K-edges, respectively. This is close to a theoretical value of 4.3 eV predicted by the PBEsol exchange–correlation functional and considerably less than a value of 5.8 eV predicted by the modified Becke–Johnson exchange–correlation functional. X-Ray excited optical luminescence (XEOL) measurements are performed to interrogate the presence of point defects in this system. Together with DFT calculations, these measurements reveal the presence of nitrogen vacancies which lead to multiple mid-gap trap states.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electronic Structure of a Graphene-like Artificial Crystal of NdNiO 3

Artificial complex-oxide heterostructures containing ultrathin buried layers grown along the pseudocubic [111] direction have been predicted to host a plethora of exotic quantum states arising from the graphene-like lattice geometry and the interplay between strong electronic correlations and band topology. To date, however, electronic-structural investigations of such atomic layers remain an immense challenge due to the shortcomings of conventional surface-sensitive probes, with typical information depths of a few Ångstroms. Here, we use a combination of bulk-sensitive soft x-ray angle-resolved photoelectron spectroscopy (SX-ARPES), hard x-ray photoelectron spectroscopy (HAXPES) and state-of-the-art first-principles calculations to demonstrate a direct and robust method for extracting momentum-resolved and angle-integrated valence-band electronic structure of an ultrathin buckled graphene-like layer of NdNiO 3 confined between two 4-unit cell-thick layers of insulating LaAlO 3 . The momentum-resolved dispersion of the buried Ni d states near the Fermi level obtained via SX-ARPES is in excellent agreement with the first-principles calculations and establishes the realization of an antiferro-orbital order in this artificial lattice. The HAXPES measurements reveal the presence of a valence-band (VB) bandgap of 265 meV. Lastly, our findings open a promising avenue for designing and investigating quantum states of matter with exotic order and topology in a few buried layers.

36 MATERIALS SCIENCE↗

Investigations on the multiple-sector hard-copper X-band accelerating structures

The development of advanced, high gradient accelerating structures is one of the leading activity of the particle accelerator community. In the technological research of new construction methods for these devices, high-power testing is a critical step for the verification of their viability. Recent experiments showed that accelerating cavities made out of hard copper, fabricated without high-temperature processes, can achieve better performance as compared with soft copper ones. Recently, we have built cavities using Tungsten Inert Gas welding and the high-power experiments confirmed that this joining process is a robust and low-cost alternative to brazing or diffusion bonding. This is a good solution for high-gradient operation, with a gradient of about 150 MV/m in X-band, at a breakdown rate of 10 -3 /pulse/meter using a shaped RF pulse with a 150 ns flat part. We continue the design, construction and high power tests of three-cells standing-wave X-band accelerating cavities fabricated with a split-open geometry, made of hard copper and vacuum-sealed by welding. Our aim is the fabrication of accelerating structures made out of hard copper alloys by using innovative cost-effective technologies. Moreover, our method of multiple-sector structures opens the way to new technological approaches and design methods, for example providing the possibility of placing dampers of the parasitic higher-order modes. Such structures with dampers allow for acceleration of multi-bunch beams, both in standing and in travelling-wave accelerating modality. Here, this paper describes the design of two cavities made of multiple sectors that were fabricated at the Italian Institute for Nuclear Physics in Frascati, Italy (INFN-LNF), assembled by means of clamping and then joined with the Tungsten Inert Gas welding in order to preserve the hardness of the metal. These are three-cell standing-wave X-band accelerating cavities, to be operated in the π-mode. We report the low-power RF tests of the first one, made of two halves, and the RF design of the second one, made of four quadrants. Both structures were built for high-gradient tests at SLAC National Accelerator Laboratory.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Dynamics of bi-periodic structures

In order to gain insight into the dynamics of biperiodic aerospace structures, a variety of one- and two-dimensional biperiodic structures are considered. It is shown that bands in which natural frequencies lie for periodic structures are further subdivided as a consequence of the biperiodicity. Analytical solutions for the modes and frequencies of finite-length one-dimensional biperiodic structures are obtained for general boundary conditions. A transmission method is developed to simplify the application of boundary conditions. Some modes are found to occur at frequencies outside the frequency bands predicted for biperiodic structures. Two-dimensional biperiodic crossed beam grillage and truss structures are considered in the present study.

Mcdaniel, T. J.↗

Investigation of 2D photonic crystal structure based channel drop filter using quad shaped photonic crystal ring resonator for CWDM system

In this paper, the design & performance of two dimensional (2-D) photonic crystal structure based channel drop filter is investigated using quad shaped photonic crystal ring resonator. In this paper, Photonic Crystal (PhC) based on square lattice periodic arrays of Gallium Indium Phosphide (GaInP) rods in air structure have been investigated using Finite Difference Time Domain (FDTD) method and photonic band gap is being calculated using Plane Wave Expansion (PWE) method. The PhC designs have been optimized for telecommunication wavelength λ= 1571 nm by varying the rods lattice constant. The number of rods in Z and X directions is 21 and 20, with lattice constant 0.540 nm it illustrates that the arrangement of Gallium Indium Phosphide (GaInP) rods in the structure which gives the overall size of the device around 11.4 µm × 10.8 µm. The designed filter gives good dropping efficiency using 3.298, refractive index. The designed structure is useful for CWDM systems. This device may serve as a key component in photonic integrated circuits. The device is ultra compact with the overall size around 123 µm{sup 2}.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Thermodynamic and Kinetic Properties of Intrinsic Defects and Mg Transmutants in 3C-SiC Determined by Density Functional Theory

Density functional theory (DFT) is used to calculate the thermodynamic and kinetic properties of transmutant Mg in 3C-SiC due to high-energy neutron irradiation associated with the fusion nuclear environment. The formation and binding energies of intrinsic defects, Mg-related defects, and clusters in 3C-SiC are systematically calculated. The minimum energy paths and activation energies during point defect migration and small cluster evolution are studied using a generalized solid-state elastic band (G-SSNEB) method with DFT energy calculations. Stable defect structures and possible defect migration mechanisms are identified. The evolution of binding energies during Mg2Si formation demonstrates that the formation of Mg2Si needs to overcome a critical nucleus size and nucleation barrier. It is also found that a compressive stress field exists around the Mg2Si nucleus. These data are important inputs in meso- and macro-scale modeling and experiments to understand and predict the impact of Mg on phase stability, microstructure evolution, and performance of SiC and SiC-based materials during long-term neutron exposures.

Environmental Molecular Sciences Laboratory↗

Visible to near-infrared luminescence properties of Nd{sup 3+}-doped La{sub 2}BaZnO{sub 5} phosphor

La{sub 2}BaZnO{sub 5}:Nd{sup 3+} phosphors are synthesized by a conventional high temperature solid state reaction method, and its crystal structure and luminescence properties are investigated. Photoluminescence bands peaking at ∼496, 540, 630, 670, 905, 1070, and 1350 nm of La{sub 2}BaZnO{sub 5}:Nd{sup 3+} phosphors are observed at room temperature due to f–f transition of Nd{sup 3+} ion. The optimum Nd{sup 3+} doped concentration is ∼0.03. Lifetimes of La{sub 1.97}BaZnO{sub 5}:0.03Nd{sup 3+} phosphor with 496 and 1070 nm monitoring wavelengths are ∼280 and 250 µs, respectively. The luminescence mechanism is explained by using simplified energy lever diagram of Nd{sup 3+} ion. La{sub 2}BaZnO{sub 5}:Nd{sup 3+} material can be applied to powerful solid-state lasers as high efficient light sources. - Graphical abstract: PL spectra of La{sub 2}BaZnO{sub 5}:Nd{sup 3+} phosphor in the visible and near-infrared regions and their corresponding to PLE at room temperature. - Highlights: • La{sub 2}BaZnO{sub 5}:Nd{sup 3+} phosphor is synthesized. • PL spectrum is observed in the visible region. • PL spectrum is observed in the near-infrared region.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

On a numerical solution of the supersonic panel flutter eigenproblem

An automated digital computer procedure is presented in this paper which enables efficient solution of the eigenvalue problem associated with the supersonic panel flutter phenomena. The step-by-step incremental solution procedure is based on an inverse iteration technique which effectively utilizes solution results from the previous step in determining such results during the current solution step. Also, the computations are limited to the determination of a few specific roots only, which are expected to contain the flutter mode, and this is achieved at each step without having to compute any other root. The structural discretization achieved by the finite-element method yields highly banded stiffness, mass, and aerodynamic matrices; the aerodynamic matrix evaluated by the linearized piston theory is real but unsymmetric in nature. The solution algorithm presented in this paper fully exploits the banded form of the associated matrices, and the resulting computer program written in FORTRAN V for the JPL UNIVAC 1108 computer proves to be most efficient and economical when compared to existing procedures of such analysis. Numerical results are presented for a two-dimensional panel flutter problem.

Gupta, K. K.↗

Efficient modeling of photonic crystals with local Hermite polynomials

Developing compact algorithms for accurate electrodynamic calculations with minimal computational cost is an active area of research given the increasing complexity in the design of electromagnetic composite structures such as photonic crystals, metamaterials, optical interconnects, and on-chip routing. We show that electric and magnetic (EM) fields can be calculated using scalar Hermite interpolation polynomials as the numerical basis functions without having to invoke edge-based vector finite elements to suppress spurious solutions or to satisfy boundary conditions. This approach offers several fundamental advantages as evidenced through band structure solutions for periodic systems and through waveguide analysis. Compared with reciprocal space (plane wave expansion) methods for periodic systems, advantages are shown in computational costs, the ability to capture spatial complexity in the dielectric distributions, the demonstration of numerical convergence with scaling, and variational eigenfunctions free of numerical artifacts that arise from mixed-order real space basis sets or the inherent aberrations from transforming reciprocal space solutions of finite expansions. The photonic band structure of a simple crystal is used as a benchmark comparison and the ability to capture the effects of spatially complex dielectric distributions is treated using a complex pattern with highly irregular features that would stress spatial transform limits. This general method is applicable to a broad class of physical systems, e.g., to semiconducting lasers which require simultaneous modeling of transitions in quantum wells or dots together with EM cavity calculations, to modeling plasmonic structures in the presence of EM field emissions, and to on-chip propagation within monolithic integrated circuits.

36 MATERIALS SCIENCE↗

Syntheses, crystal and band structures, and optical properties of a selenidoantimonate and an iron polyselenide

A new selenidoantimonate (CH{sub 3}NH{sub 4})[Mn(phen){sub 2}](SbSe{sub 4})·phen (1, phen=1,10-phenanthroline) and an iron polyselenide [Fe(phen){sub 2}](Se{sub 4}) (2) were obtained under hydro(solvo)thermal conditions. Compound 1 represents the first example of a selenidoantimonate anion as a ligand to a transition-metal π-conjugated ligand complex cation. Compound 2 containing a κ{sup 2}Se{sup 1},Se{sup 4} chelating tetraselenide ligand, represents the only example of a tetraselenide ligand to a Fe complex cation. Compounds 1 and 2 exhibit optical gaps of 1.71 and 1.20 eV, respectively and their thermal stabilities have been investigated by thermogravimetric analyses. The electronic band structure along with the density of states calculated by the DFT method indicate that the optical absorptions mainly originate from the charge transitions from the Se 4p and Mn 3d states to the phen p–π{sup ⁎} orbital for 1 and the Se 4p and Fe 3d states to the phen p–π{sup ⁎} orbital for 2. - Graphical abstract: Two metal–Se complexes, representing the only example of a selenidoantimonate ligand to a TM π-conjugated ligand complex, and a tetraselenide ligand to a Fe complex cation, were synthesized. - Highlights: • The first π-conjugated ligand complex containing selenidoantimonate was isolated. • The first example of a tetraselenide ligand to a Fe complex cation was reported. • We found that phen can adjust the optical band gaps of metal–Se complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Optical Properties of Metamaterial-Superconductor Photonic Band Gap With/Without Defect Layer

In the present work, we have investigated theoretically the optical properties of a new one-dimensional defected photonic crystal structure (1DDPC). The structure is composed of alternating layers of metamaterial (double-negative material) and high Tc superconductor material called Hg1223 defected with a dielectric material (SiO{sub 2}) at the center of the structure. The transmittance spectra of the proposed structure are obtained by using the transfer matrix method (TMM). We noticed that multiple transmittance peaks within the photonic band gap (PBG) as the thickness of defect layer increases. The tunable filtering feature is obtained by varying the thicknesses of metamaterial and superconductor layer. In addition, the defect peak is red shifted as well as photonic band gap tuned to low-frequency region. Our structure is sensitive to the variation of the angle incidence. Also, defect mode shown to be blue shifted as the angle of incidence increases. The tunable filtering properties are very useful in the optoelectronic applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electronic structure, thermodynamic properties and hydrogenation of LaPtIn and CePtIn compounds by ab-initio methods

The electronic structures and thermodynamic properties of LaPtIn and CePtIn are studied by means of ab-initio full-relativistic full-potential local orbital basis (FPLO) method within densities functional (DFT) methodologies. We have also examined the influence of hydrogen on the electronic structure and stability of CePtInH and LaPtInH systems. The positions of the hydrogen atoms have been found from the minimum of the total energy. Our calculations have shown that band structure and topology of the Fermi surfaces changed significantly during the hydrogenation. The thermodynamic properties (bulk modulus, Debye temperatures, constant pressure heat capacity) calculated in quasi-harmonic Debye-Grüneisen model are in a good agreement with the experimental data. We have applied different methods of the calculation of the equation of states (EOS) (Murnaghan, Birch-Murnaghan, Poirier–Tarantola, Vinet). The thermodynamic properties are presented for the pressure 0<P<9 GPa and the temperature range 0<T<300 K. - Highlights: • Full relativistic band structure of LaPtIn and CePtIn. • Fermi surface of LaPtIn, LaPtInH, CePtIn, CePtInH. • Effect of hydrogenation on the electronic structure of LaPtIn and CePtIn. • Thermodynamic properties in the quasi-harmonic Debye-Grüneisen model.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

First-principles study of electronic states in LiBe{sub 2}

By coupling structure prediction methods with first-principles total energy calculations we find lattice constant and bulk modulus of hcp LiBe{sub 2}. Structural and electronic properties are investigated using Linear Combination of Atomic Orbital’s method. The generalized gradient approximation based density functional calculations are attempted to look for the ground state. Thereafter ground state electronic band structure, total density of states and anisotropies in directional Compton profiles are computed. Step like behavior seen broadly in density of states (DOS) is appreciated by band structure suggesting 2D features. Anisotropic behavior of electronic states around Fermi level is also reflected in anisotropies of directional Compton profiles.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

First-principles energy band calculation of Ruddlesden–Popper compound Sr{sub 3}Sn{sub 2}O{sub 7} using modified Becke–Johnson exchange potential

The electronic structure of Sr{sub 3}Sn{sub 2}O{sub 7} is evaluated by the scalar-relativistic full potential linearized augmented plane wave (FLAPW+lo) method using the modified Becke–Johnson potential (Tran–Blaha potential) combined with the local density approximation correlation (MBJ–LDA). The fundamental gap between the valence band (VB) and conduction band (CB) is estimated to be 3.96 eV, which is close to the experimental value. Sn 5s states and Sr 4d states are predominant in the lower and upper CB, respectively. On the other hand, the lower VB is mainly composed of Sn 5s, 5p, and O 2p states, while the upper VB mainly consists of O 2p states. These features of the DOS are well reflected by the optical transition between the upper VB and lower CB, as seen in the energy dependence of the dielectric function. Furthermore, the absorption coefficient estimated from the MBJ–LDA is similar to the experimental result. - Graphical abstract: Calculated energy band structure along the symmetry lines of the first BZ of Sr{sub 3}Sn{sub 2}O{sub 7} crystal obtained using the MBJ potential. - Highlights: • Electronic structure of Sr{sub 3}Sn{sub 2}O{sub 7} is calculated on the basis of MBJ–LDA method for the first time. • Band gap of Sr{sub 3}Sn{sub 2}O{sub 7} is determined accurately on the basis of MBJ–LDA method. • The experimental absorption spectrum of Sr{sub 3}Sn{sub 2}O{sub 7} produced by MBJ–LDA is more accurate than that obtained by GGA method.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗