SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
We developed a single-phase Pd/NbOPO 4 catalyst for reductive etherification that displays high catalytic activity, product selectivity, and regeneration stability.
CeO 2 -supported NiO x catalysts have been widely studied in various catalytic reactions including NO reduction by CO. This work is mainly focused on investigation of the impact of catalyst synthesis conditions (e.g., oxidation and reduction) on the physicochemical properties of NiO x /CeO 2 catalysts and the catalytic response for the NO reduction by CO reaction. The oxide NiO x /CeO 2 sample was prepared by an incipient wetness impregnation (IWI) method and reduced under hydrogen reduction treatment at high temperatures (500 and 700 °C). The physicochemical properties of the synthesized samples were characterized by BET analysis, Raman spectroscopy, XRD, XPS, EELS and high-resolution transmission electron microscopy (HR-TEM). The results showed that higher reduction temperature led to the decrease in specific surface area (SSA), fewer oxygen vacancy/defect site, larger crystallite size of the CeO 2 support, and formation of metallic Ni on the surface. The oxidized NiO x /CeO 2 catalyst showed the highest catalytic activity, indicating that the presence of oxygen vacancy/defect sites, Ni 2+ oxidation state, and smaller crystallite size are believed to enhance the catalytic activity. In situ DRIFTS confirmed the generation of several intermediate species, such as nitrate, carbonate, and N 2 O. Finally, on the basis of in situ DRIFTS and activity results, the possible reaction mechanism of NO reduction by CO over NiO x /CeO 2 was proposed.
Platinum supported on mixed-metal oxides (MMOs) are a class of active and durable cathode catalysts for proton exchange membrane fuel cell (PEMFC) due to a combination of the high oxidative stability of the supports and strong-metal-support interactions (SMSI) that enable them to exceed the activity of Pt/C. Herein, we solve a significant remaining challenge with Pt/MMO systems, namely the relatively low surface area and porosity. This is achieved by dispersing nearly-uniform Pt clusters using atomic layer deposition (ALD) on highly conductive (6.2 S/cm) and stable antimony doped tin dioxide (ATO) support. ALD-Pt/ATO exhibited significantly higher electrochemically active surface area (ECSA) (74 m 2 /g) and oxygen reduction reaction (ORR) catalytic activity (102 mA/mg Pt at 0.9 V vs. RHE) compared to Pt/ATO synthesized using ethylene glycol (ECSA=31 m 2 /g Pt , mass activity=52 mA/mg Pt at 0.9 V vs. RHE) and formic acid reduction methods (ECSA=28 m 2 /g Pt , mass activity=46 mA/mg Pt at 0.9 V vs. RHE). Further characterization showed that wet chemical methods resulted in poorer Pt particle dispersion, poor control over Pt particle size distribution and chemical degradation of the support (during Pt deposition). Given the near-ideal Pt particle size distribution of the ALD-Pt/ATO, particle size growth and loss of ECSA was found to be minimal over the course of rigorous potential cycling. Thus, after 10,000 potential cycles between 1V and 1.5V vs. RHE, ALD-Pt/ATO and other Pt/ATOs were found to retain 100% of their initial ECSA compared to 57.6% retention for Pt/C. Upon testing in a H 2 /air PEMFC, following 1,000 potential cycles, the change in ALD-Pt/ATO performance was negligible while Pt/C exhibited a 68.2% loss of initial peak power density. Thus, ALD-Pt/ATO is an active and highly durable ORR electrocatalyst in PEMFCs under start-up-shut down conditions.
Electrochemical reduction of carbon dioxide to organic chemicals provides a value-added route for mitigating greenhouse gas emissions. Here, we report a family of carbon-supported Sn electrocatalysts with the tin size varying from single atom, ultrasmall clusters to nanocrystallites. High single-product Faradaic efficiency (FE) and low onset potential of CO 2 conversion to acetate (FE = 90% @ –0.6 V), ethanol (FE = 92% @ –0.4 V), and formate (FE = 91% @ –0.6 V) were achieved over the catalysts of different active site dimensions. The CO 2 conversion mechanism behind these highly selective, size-modulated p-block element catalysts was elucidated by structural characterization and computational modeling, together with kinetic isotope effect investigation.
The Catalytic Upgrading of Biochemical Intermediates (CUBI) project is a multi-lab effort within ChemCatBio (CCB) that is focused on improving the catalytic upgrading of intermediates from biochemical deconstruction and/or biological conversion (i.e. fermentation) to fuels and chemical co-products. This is accomplished by developing catalysts with improved performance and durability, mitigating the impact of biogenically-derived inhibitors (including water), and evaluating intensified processes to reduce separations requirements and improve carbon utilization. Specific catalytic upgrading routes being developed are: 1) fermentation-derived 2,3-butanediol (BDO); 2) fermentation-derived carboxylic acids; and 3) lignocellulosic sugar-derived furfurals. These routes represent key technology pathways being investigated within BETO's biochemical conversion portfolio. By utilizing experimental and characterization capabilities and modeling tools across the 4 CUBI labs and collaborations with CCB Enabling Projects, the CUBI project is advancing catalytic upgrading process performance and robustness. Its impact is already well-established by several high-impact journal articles and patent publications, along with industrial engagement in related, competitively-awarded collaborations. The CUBI project will result in >25% MFSP cost reduction in the catalytic upgrading section of integrated biochemical conversion routes, as quantified by ongoing TEA modeling.
Bismuth (Bi) has been known as a highly efficient electrocatalyst for CO 2 reduction reaction. Stable free-standing two-dimensional Bi monolayer (Bismuthene) structures have been predicted theoretically, but never realized experimentally. Here, we show the first simple large-scale synthesis of free-standing Bismuthene, to our knowledge, and demonstrate its high electrocatalytic efficiency for formate (HCOO - ) formation from CO 2 reduction reaction. The catalytic performance is evident by the high Faradaic efficiency (99% at -580 mV vs. Reversible Hydrogen Electrode (RHE)), small onset overpotential (<90 mV) and high durability (no performance decay after 75 h and annealing at 400 °C). Density functional theory calculations show the structure-sensitivity of the CO2 reduction reaction over Bismuthene and thicker nanosheets, suggesting that selective formation of HCOO - indeed can proceed easily on Bismuthene (111) facet due to the unique compressive strain. This work paves the way for the extensive experimental investigation of Bismuthene in many different fields.
The application of metal–organic frameworks (MOFs) as electrocatalysts for small molecule activation has been an emerging topic of research. Previous studies have suggested that two-dimensional (2D) dithiolene-based MOFs are among the most active for the hydrogen evolution reaction (HER). Here, a three-dimensional (3D) dithiolene-based MOF, Cu[Ni(2,3-pyrazinedithiolate) 2 ] (1), is evaluated as an electrocatalyst for the HER. In pH 1.3 aqueous electrolyte solution, 1 exhibits a catalytic onset at –0.43 V vs the reversible hydrogen electrode (RHE), an overpotential (η 10 mA/cm 2 ) of 0.53 V to reach a current density of 10 mA/cm 2 , and a Tafel slope of 69.0 mV/dec. Interestingly, under controlled potential electrolysis, 1 undergoes an activation process that results in a more active catalyst with a 200 mV reduction in the catalytic onset and η 10 mA/cm 2 . It is proposed that the activation process is a result of the cleavage of Cu–N bonds in the presence of protons and electrons. Furthermore, this hypothesis is supported by various experimental studies and density functional theory calculations.
Explore the source record for details and available documents.
Abstract Nanosecond time‐resolved X‐ray (tr‐XAS) and optical transient absorption spectroscopy (OTA) are applied to study 3 multimolecular photocatalytic systems with [Ru(bpy) 3 ] 2+ photoabsorber, ascorbic acid electron donor and Co catalysts with methylene ( 1 ), hydroxomethylene ( 2 ) and methyl ( 3 ) amine substituents in pure water. OTA and tr‐XAS of 1 and 2 show that the favored catalytic pathway involves reductive quenching of the excited photosensitizer and electron transfer to the catalyst to form a Co II square pyramidal intermediate with a bonded aqua molecule followed by a Co I square planar derivative that decays within ≈8 μs. By contrast, a Co I square pyramidal intermediate with a longer decay lifetime of ≈35 μs is formed from an analogous Co II geometry for 3 in H 2 O. These results highlight the protonation of Co I to form the elusive hydride species to be the rate limiting step and show that the catalytic rate can be enhanced through hydrogen containing pendant amines that act as H−H bond formation proton relays.
The synthesis and investigation of [Rh(DHMPE) 2 ][BF 4 ] (1) are reported. 1 features proton-responsive 1,2-bis[(dihydroxymethyl)phosphino]ethane (DHMPE) ligands, which readily capture CO 2 from atmospheric sources upon deprotonation. The protonation state of the DHMPE ligand was observed to have a significant impact on the catalytic reactivity of 1 with CO 2 . Deprotonation and CO 2 binding to 1 result in a ∼10-fold rate enhancement in catalytic degenerate CO 2 reduction with formate, monitored by 12 C/ 13 C isotope exchange between H 12 CO 2 – and 13 CO 2 . Studies performed using a similar complex lacking the hydroxyl ligand functionality ([Rh(DEPE) 2 ][BF 4 ] where DEPE = 1,2-bis(diethylphosphino)ethane) do not show the same rate enhancements when base is added. Based upon the cation-dependent activity of the catalyst, Eyring analysis, and cation sequestration experiments, CO 2 binding to 1 is proposed to facilitate preorganization of formate/CO 2 in the transition state via ligand-based encapsulation of Na + or K + cations to lower the activation energy and increase the observed catalytic rate. Incorporation of proton-responsive DHMPE ligands provides a unique approach to accelerate the kinetics of catalytic CO 2 reduction to formate.
NiO x /CeO 2 catalysts have shown promising results in various catalytic reactions, including the NO reduction by CO. Here, in this study, we investigated the effect of oxidation and reduction treatments on the NO reduction by CO over pretreated NiO x /CeO 2 catalysts. A series of oxidized and reduced supported NiO x catalysts were synthesized in two steps: (1) the pretreatment of CeO 2 supports at different temperatures (400, 500, and 700 °C) under oxidizing and reducing conditions and (2) the synthesis of NiO x /CeO 2 catalysts by an incipient wetness impregnation method (IWI) with a fixed surface density of 5.3 Ni per nm 2 under specific conditions (oxidation/reduction) applied during the CeO 2 treatment. The prepared catalysts were characterized via BET, ICP/OES, Raman, XPS, and XRD to understand their physicochemical properties. The results showed that as the pretreatment temperature increased, the physicochemical properties of NiO x /CeO 2 catalysts were changed: a decreased specific surface area (SSA), decreased oxygen vacancy/defect sites, and an increased crystallite size. The oxidized NiO x /CeO 2 catalyst at a lower pretreatment temperature displayed a better catalytic activity, indicating that the physicochemical properties of the catalysts were key factors in enhancing the catalytic activity. To understand the intermediate species and reaction mechanism during the NO reduction by CO, an in situ DRIFTS study was performed and a possible reaction mechanism was also discussed.
Abstract Co core@Co oxide shell (Co@CoO x ) catalysts represent a large family with promising oxygen reduction reaction (ORR) catalytic activity. However, inadequate understanding of Co@CoO x synergy prohibits further pursuit of catalytic performance enhancement. Herein, a Co zeolitic−imidazolate framework was converted into metallic Co, followed by controlled air treatment to form Co@CoO x . The composition and structure evolution as a function of air treatment temperature were studied thoroughly through conventional and synchrotron (both ex‐situ and in‐situ) characterizations, confirming the coexistence of CoO and Co 3 O 4 in the shell. The optimal catalyst showed an ORR half‐wave potential of 0.87 V (vs. RHE) in an alkaline half‐cell and delivered high discharge capacity in an aprotic Li−O 2 battery (7,124 mAh g Cat+C −1 ) and an aqueous Zn−air battery (694 mAh g Zn −1 ) with good performance retention after durability test. Modeling simulation and density functional theory calculation confirmed the charge donation from metal core to oxide shell and shed light on new insights of how metal@metal oxide synergy impacted the ORR via tuning the charge conductivity, oxygen affinity and intermediate transfer pathway. This work opens up a venue to boost ORR catalytic activity from an interfacial synergy perspective.
Iron plays a vital role in natural processes such as water, mineral, iron, and nutrient cycles. Iron undergoes reduction-oxidation and catalytic reactions to produce various corrosion films depending on its chemical environment. Near ambient pressure X-ray photoelectron spectroscopy, polarized modulated infrared reflection absorption spectroscopy, and Auger electron spectroscopy were used to study the key reactants, from O 2 (g), H 2 O vapor, Na + and Cl – on the initial stages of iron surface corrosion. Here, with increasing the ratio of O 2 and H 2 O, surface hydrocarbons were shown to oxidize into carbonates, while the Cl – was found to migrate into the interface. The effect of each individual reactant was measured separately and water was shown to have a first order rate dependence on the carbonate growth at low pressures, with little dependence for O 2 . Near ambient pressures, both H 2 O and O 2 were found to increase the carbonate growth, which was estimated using the Langmuir isotherm model, yielding Gibbs energies between –9.8 to –8.5 kJ/mol. A mechanism is suggested to explain the oxidation is catalyzed by NaCl on iron surfaces and the adventitious hydrocarbons served as the source for surface carbonation. These findings have implications for understanding other surface catalytic and redox interface chemistry in complex environments.
Carotenoid cleavage dioxygenases (CCDs) are non-heme Fe II enzymes that catalyze the oxidative cleavage of alkene bonds in carotenoids, stilbenoids, and related compounds. How these enzymes control the reaction of dioxygen (O 2 ) with their alkene substrates is unclear. Here, we apply spectroscopy in conjunction with X-ray crystallography to define the iron coordination geometry of a model CCD, CAO1 (Neurospora crassa carotenoid oxygenase 1), in its resting state and following substrate binding and coordination sphere substitutions. Resting CAO1 exhibits a five-coordinate (5C), square pyramidal Fe II center that undergoes steric distortion toward a trigonal bipyramidal geometry in the presence of piceatannol. Titrations with the O 2 -analog, nitric oxide, show a >100-fold increase in iron–nitric oxide affinity upon substrate binding, defining a crucial role for the substrate in activating the Fe II site for O 2 reactivity. The importance of the 5C Fe II structure for reactivity was probed through mutagenesis of the second-sphere Thr151 residue of CAO1, which occludes ligand binding at the sixth coordination position. A T151G substitution resulted in the conversion of the iron center to a six-coordinate state and a 135-fold reduction in apparent catalytic efficiency toward piceatannol compared with the wildtype enzyme. Substrate complexation resulted in partial six-coordinate to 5C conversion, indicating solvent dissociation from the iron center. Additional substitutions at this site demonstrated a general functional importance of the occluding residue within the CCD superfamily. Taken together, these data suggest an ordered mechanism of CCD catalysis occurring via substrate-promoted solvent replacement by O 2 . CCDs thus represent a new class of mononuclear non-heme Fe II enzymes.
A highly stable Pd-loaded N-doped carbon catalyst (ACN pd ) for phenol hydrogenation was prepared from chitosan by hydrothermal carbonization. ACN pd does not require a reduction step before catalytic use due to the Pd in the as-prepared catalyst mainly exists in the form of Pd 0 (80%). The carbon support involves N-containing groups such as pyridinic nitrogen and pyrrolic nitrogen, which could provide basic sites to adsorb phenol effectively. The as-fabricated ACN pd shows high catalytic performance with turnover frequency (TOF) of 29.34 h -1 . Accordingly, a phenol conversion of 100% and a cyclohexanone selectivity of 99.1% are achieved in 5 h at 100 °C and 1 MPa H 2 . This outstanding performance is attributed to the synergetic effects of the Pd particles, the N-functional groups, and the Lewis acid sites on the support. The carbon support presents intrinsic Lewis acid sites due to its electrophilicity, and Pd doping further increases the strength of such acid sites as it causes electron-deficient structural features. Moreover, the Lewis acid sites inhibit the over-hydrogenation from cyclohexanone to cyclohexanol. This study provides new insights into the application of functional biomass-based carbon materials as catalyst supports.
Strain is known to enhance the activity of the oxygen reduction reaction in catalytic platinum alloy nanoparticles, whose inactivity is the primary impediment to efficient fuel cells and metal–air batteries. Here, Bragg coherent diffraction imaging (BCDI) was employed to reveal the strain evolution during the voltammetric cycling in Pt–Ni alloy nanoparticles composed of Pt 2 Ni 3 , Pt 1 Ni 1 , and Pt 3 Ni 2 . Analysis of the 3D strain images using a core–shell model shows that the strain as large as 5% is induced on Pt-rich shells due to Ni dissolution. The composition dependency of the strain on the shells is in excellent agreement with that of the catalytic activity. The present study demonstrates that BCDI enables quantitative determination of the strain on alloy nanoparticles during electrochemical reactions, which provides a means to exploit surface strain to design a wide range of electrocatalysts.
Precise evaluation of intrinsic kinetic behavior in Mo/MFI catalysts for methane dehydroaromatization (MDA) is confounded by variations in Mo dispersion and speciation, which are influenced by metal loading and zeolite acidity. This work advances the utility of H 2 -temperature programmed reduction (H 2 -TPR) for characterizing Mo/MFI catalysts by enabling quantitative comparison of MoO x populations distinguished by reduction behavior and linked to initial catalytic performance. A comprehensive H 2 reduction pathway is established through systematic H 2 - TPR studies varying catalyst composition (1–10 wt % Mo, Si/Al = 15, 40, ∞), supplemented by UV-Raman spectroscopy, X-ray powder diffraction, N 2 physisorption, NH 3 -TPD, and advanced spectroscopic analysis (in situ XAS with principal component analysis/multivariate curve resolution—alternating least squares). Two low-temperature H 2 -TPR regions capture distinct Mo populations undergoing initial Mo(VI)→Mo(IV) reduction: a lower-temperature population (Mo-RI) associated primarily with highly dispersed, anchored MoO x species expected to predominantly reside within MFI channels, and a higher-temperature population (Mo-RII) corresponding to a broader set of MoO x species that becomes increasingly bulk-like/extrazeolitic at higher Mo loading. Quantification of these populations provides practical, kinetically relevant descriptors for comparing initial MDA rates across catalysts with varying Mo loading, Si/Al ratio, and MoO x heterogeneity. Application of lower-temperature Mo-RI estimates to kinetic measurements reveals a minimum threshold of ∼0.12 × 10 –3 mol Mo-RI/g cat , above which initial forward benzene rates normalized to this population converge despite differences in metal loading and zeolite Brønsted acidity. This threshold coincides with a transition toward a common C 2 -mediated benzene-forming regime, as indicated by approach-to-equilibrium analysis of methane-to-ethane, ethane-to-ethylene, and ethylene-to-benzene reaction steps. Above this threshold, normalized initial benzene rates are nearly invariant with increasing Mo-RII/Mo-RI population ratio, indicating that excess Mo-RII populations, including bulk-like/extrazeolitic MoO x domains present at higher loading, do not measurably suppress benzene formation associated with anchored and mostly channel-confined Mo population under the initial-rate conditions examined.