Search NASA⌕ Search

SEARCH · Search NASA

Results for “Data Architecture”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Mass storage systems for data transport in the early space station era 1992-1998

NASA's Space Station Program will provide a vehicle to deploy an unprecedented number of data producing experiments and operational devices. Peak down link data rates are expected to be in the 500 megabit per second range and the daily data volume could reach 2.4 terabytes. Such startling requirements inspired an internal NASA study to determine if economically viable data storage solutions are likely to be available to support the Ground Data Transport segment of the NASA data system. To derive the requirements for data storage subsystems, several alternative data transport architectures were identified with different degrees of decentralization. Data storage operations at each subsystem were categorized based on access time and retrieval functions, and reduced to the following types of subsystems: First in First out (FIFO) storage, fast random access storage, and slow access with staging. The study showed that industry funded magnetic and optical storage technology has a reasonable probability of meeting these requirements. There are, however, system level issues that need to be addressed in the near term.

Carper, Richard↗
NASA NTRS1992

Neural network architectures to analyze OPAD data

A prototype Optical Plume Anomaly Detection (OPAD) system is now installed on the space shuttle main engine (SSME) Technology Test Bed (TTB) at MSFC. The OPAD system requirements dictate the need for fast, efficient data processing techniques. To address this need of the OPAD system, a study was conducted into how artificial neural networks could be used to assist in the analysis of plume spectral data.

Whitaker, Kevin W.↗
NASA NTRS1992

Properties of Graphite Fiber Reinforced Copper Matrix Composites for Space Power Applications

The thermal and mechanical properties of pitch-based graphite fiber reinforced copper matrix (Gr/Cu) composites usable for space applications such as radiator fins were investigated. Thermal conductivity was measured as a function of fiber volume fraction and architecture. Results showed for unidirectional P-100 Gr/Cu composites, the longitudinal thermal conductivity was nearly independent of fiber volume fraction. Transverse thermal conductivities (perpendicular to the fibers) were strongly affected by the fiber volume fraction with higher volume fractions resulting in lower thermal conductivities. The effect of architecture on thermal conductivity followed the cosine squared law for simple architectures. Insufficient data are available currently to model more complex architectures, but adding fibers in the direction of the heat flow increases the thermal conductivity as low conductivity plies are supplemented by high conductivity plies. Thermal expansion tests were conducted on the Gr fibers and Gr/Cu composites. The results show a considerable thermal expansion mismatch between the fibers and the Cu matrix. The longitudinal thermal expansion showed a strong dependence on the architecture of the Gr/Cu composites. The composites also show a thermal expansion hysteresis. The hysteresis was eliminated by an engineered interface. Mechanical testing concentrated on the dynamic modulus and strength of the composites. The dynamic modulus of the Gr/Cu composites was 305 GPa up to 400 C, a value equivalent to Be. The strengths of the composites were less than expected, but this is attributed to the poor bond across the interface between the Gr fibers and Cu matrix. Testing of composites with an engineered interface is expected to yield strengths nearer the values predicted by the rule of mixtures.

Ellis, David L.↗
NASA NTRS2011

An Ontology Driven Information Architecture for Interoperable Disparate Data Sources

The mission of the Planetary Data System is to facilitate achievement of NASA's planetary science goals by efficiently collecting, archiving, and making accessible digital data produced by or relevant to NASA's planetary missions, research programs, and data analysis programs. The vision is: (1) To gather and preserve the data obtained from exploration of the Solar System by the U.S. and other nations (2) To facilitate new and exciting discoveries by providing access to and ensuring usability of those data to the worldwide community (3) To inspire the public through availability and distribution of the body of knowledge reflected in the PDS data collection PDS is a federation of heterogeneous nodes including science and support nodes

planetary data systems↗
NASA NTRS2014

Architectures Toward Reusable Science Data Systems

Science Data Systems (SDS) comprise an important class of data processing systems that support product generation from remote sensors and in-situ observations. These systems enable research into new science data products, replication of experiments and verification of results. NASA has been building systems for satellite data processing since the first Earth observing satellites launched and is continuing development of systems to support NASA science research and NOAA's Earth observing satellite operations. The basic data processing workflows and scenarios continue to be valid for remote sensor observations research as well as for the complex multi-instrument operational satellite data systems being built today.

Data Processing↗
NASA NTRSDate not supplied

A Spectrally Efficient Ka-Band GaN Power Amplifier with Scalable Power Combining Architecture for Lunar High Data Rate Direct-to-Earth Communications

The output power from a single gallium nitride (GaN) high electron mobility transistor (HEMT) based monolithic microwave integrated circuit (MMIC) power amplifier (PA) chip is limited to few watts. To achieve higher power, the output from several chips have to be combined. In this paper we present, the results of a study conducted to investigate a 2-way power combiner to combine the output power from two GaN MMIC based high power amplifier (HPA) chips The parameters investigated includes the power combiner characteristics, individual GaN MMIC based HPA output power, gain, and power added efficiency, and the overall performance of the combined amplifier.

Gallium Nitride↗
NASA NTRS1997

The ASC Data Archive for the AXAF Ground Calibration

A data archive is near completion at the AXAF Science Center (ASC) to store and provide access to AXAF data. The archive is a distributed client/server system. It consists of a number of different servers which handle flat data files, relational data, replication across multiple sites, and the interface to the WWW. There is a 4GL client interface for each type of data server, C++ and Java APIs, and a number of standard clients to archive and retrieve data. The architecture is scalable and configurable in order to accommodate future data types and increasing data volumes. The first release of the system became available in August 1996 and has been successfully operated since then in support of the AXAF calibration at the George C. Marshall Space Flight Center, Huntsville, AL. This paper will present the overall archive architecture and the design of client and server components. It will also review the ground calibration data contents, the plan for flight data, and the access to the data by ASC internal users and processing pipelines.

Zografou, Panagoula↗
NASA NTRS1987

An evaluation plan of bus architectures and protocols using the NASA Ames intelligent redundant actuation system

Means for evaluating data bus architectures and protocols for highly integrated flight control system applications are needed. Described are the criteria and plans to do this by using the NASA/Ames Intelligent Redundant Actuation System (IRAS) experimental set-up. Candidate bus architectures differ from one another in terms of: topology, access control, message transfer schemes, message characteristics, initialization. data flow control, transmission rates, fault tolerance, and time synchronization. The evaluation criteria are developed relative to these features. A preliminary, analytical evaluation of four candidate busses (MIL-STD-1553B, DATAC, Ethernet, and HSIS) is described. A bus must be exercised in a real-time environment to evaluate its dynamic characteristics. A plan for real-time evaluation of these four busses using a combination of hardware and simulation techniques is presented.

Defeo, P.↗
NASA NTRS1991

Digital Signal Conditioning for Flight Test Instrumentation

This volume in the AGARD Flight Instrumentation Series provides flight test instrumentation engineers with an introduction to digital measurement processes on aircraft. Flight test instrumentation systems are rapidly evolving from analog-intensive to digital-intensive systems, including the use of onboard digital computers. Topics include measurements that are digital in origin, as well as sampling, encoding, transmitting, and storing of data. Particular emphasis is placed on modern avionic data bus architectures and what to be aware of when extracting data from them. Examples of data extraction techniques are given. Tradeoffs between digital logic families, trends in digital development, and design testing techniques are discussed. An introduction to digital filtering is also covered.

Data acquisition↗
NASA NTRS1991

Digital Signal Conditioning for Flight Test, Volume 19 [Le Traitement du Signal Numérique pour les Essais en Vol]

This volume in the AGARD Flight Instrumentation Series provides flight test instrumentation engineers with an introduction to digital processes on aircraft. Flight test instrumentation systems are rapidly evolving from analog intensive to digital intensive systems, including the use of onboard digital computers. Topics include: measurements that are digital in origin, sampling, encoding, transmitting, and storing of data. Particular emphasis is placed on modem avionic data bus architectures and what to be aware of when extracting data from them. Some example data extraction techniques are given. Tradeoffs between digital logic families, trends in digital development, and design testing techniques are discussed. An introduction to digital filtering is also covered.

Flight instruments↗
NASA NTRS2001

Automation of Data Traffic Control on DSM Architecture

The design of distributed shared memory (DSM) computers liberates users from the duty to distribute data across processors and allows for the incremental development of parallel programs using, for example, OpenMP or Java threads. DSM architecture greatly simplifies the development of parallel programs having good performance on a few processors. However, to achieve a good program scalability on DSM computers requires that the user understand data flow in the application and use various techniques to avoid data traffic congestions. In this paper we discuss a number of such techniques, including data blocking, data placement, data transposition and page size control and evaluate their efficiency on the NAS (NASA Advanced Supercomputing) Parallel Benchmarks. We also present a tool which automates the detection of constructs causing data congestions in Fortran array oriented codes and advises the user on code transformations for improving data traffic in the application.

Frumkin, Michael↗
NASA NTRS2012

NASA Data Acquisitions System (NDAS) Software Architecture

The NDAS Software Project is for the development of common low speed data acquisition system software to support NASA's rocket propulsion testing facilities at John C. Stennis Space Center (SSC), White Sands Test Facility (WSTF), Plum Brook Station (PBS), and Marshall Space Flight Center (MSFC).

Davis, Dawn↗
NASA NTRS1990

High-speed fiber-optic links for distribution of satellite traffic

Low-loss fiberoptic links are designed for distribution of data and the frequency reference in large-aperture phased-array antennas based on the transmit/receive-level data mixing architecture. In particular, design aspects of a fiberoptic link satisfying the distribution requirements of satellite data traffic are presented. The design is addressed in terms of reactively matched optical transmitter and receiver modules. Analog and digital characterization of a 50-m fiberoptic link realized using these modules indicates the applicability of this architecture as the only viable alternative for distribution of data signals inside a satellite at present. It is demonstrated that the design of a reactive matching modules enhances the link performance. A dynamic range of 88 dB/MHz was measured for analog data over a 500-1000-MHz bandwidth.

Daryoush, Afshin S.↗
NASA NTRSDate not supplied

Use NASA Earthdata in the Cloud

With the impending arrival of new, high-data-volume Earth observation missions, NASA’s ability to effectively ingest, process, and archive large amounts of data requires the most cost-effective, flexible, and scalable data-management architectures and technologies. To meet these demands, NASA's Earth Science Data Systems (ESDS) Program is implementing a strategic vision to develop and operate multiple components of NASA's Earth Observing System Data and Information System (EOSDIS) in a commercial cloud environment. As more earth observing data is moved into the cloud, NASA EOSDIS wants to share our reasoning for moving data into the commercial cloud, as well as demonstrate how end-users can take advantage of both data in the cloud and cloud-deployed services. This presentation explains the enterprise reasons for moving data into the cloud, specifically the scalability of cloud systems, the flexibility to pivot to the most optimal language/system/architecture, and the reduced redundancy of a common architecture. Then we primarily focus on the user-driven reasons for moving to the cloud. Equal access to high performance computing helps all parties, especially users that don't have access to their own on-premise computing infrastructure. Rapid deployment allows users to spin up their own systems without needing the extensive platform previously required for large scale development. Cost effectiveness allows users a wide breadth of computing options, from super computer ability to small scale development, which can help underserved communities. Finally we link to internal resources that users can utilize to begin their cloud based development journey without having to be an expert in the field.

Nicholas Doty↗