Search NASA⌕ Search

SEARCH · Search NASA

Results for “Data Plotting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Aircraft Measurements of Heat Fluxes Over Wind-Driven Coastal Polynyas in the Bering Sea

The first estimates of the average bulk heat transfer coefficient for Arctic sea ice are presented as a function of mean ice thickness. Turbulent heat flux measurements made by the NASA P-3 over the St. Lawrence Island polynya (SLIP) and Kuskokwim Bay in the Bering Sea during AMSR-Ice03 were used to estimate the values of the heat transfer coefficient CH. Estimates of ice thickness were made from the algorithm of Perovich et al. using broadband albedos obtained from Moderate Resolution Imaging Spectroradiometer data. Plots of CH as a function of ice thickness showed a nearly linear relationship for ice thicknesses in the range of 0-14 cm in the polynyas. Previous estimates of CH for different cases over the SLIP were 1.2 x 10(exp -3), but no estimates of ice thickness were available. These results will allow more accurate estimates of heat fluxes from the thin-ice areas of polynyas using satellite retrievals.

Walter, Bernard↗

Halophytes Energy Feedstocks: Back to Our Roots

Of the Earth s landmass, approx.43% is arid or semi-arid, and 97% of the Earth s water is seawater. Halophytes are salt-tolerant plants (micro and macro) that can prosper in seawater or brackish waters and are common feedstocks for fuel and food (fuel-food feedstocks) in depressed countries. Two types, broadly classed as coastal and desert, can be found in marshes, coastal planes, inland lakes, and deserts. Major arid or semi-arid halophyte agriculture problems include pumping and draining the required high volumes of irrigation water from sea or ocean sources. Also, not all arid or semi-arid lands are suitable for crops. Benefits of halophyte agriculture include freeing up arable land and freshwater resources, cleansing the environment, decontaminating soils, desalinating brackish waters, and carbon sequestration. Sea and ocean halophyte agriculture problems include storms, transport, and diffuse harvesting. Benefits include available nutrients, ample water, and Sun. Careful attention to details and use of saline agriculture fuel feedstocks are required to prevent anthropogenic disasters. It is shown that the potential for fuel-food feedstock halophyte production is high; based on test plot data, it could supply 421.4 Quad, or 94% of the 2004 world energy consumption and sequester carbon, with major impact on the Triangle of Conflicts.

Hendricks, Robert C.↗

Science Opportunity Analyzer (SOA): Science Planning Made Simple

.For the first time at JPL, the Cassini mission to Saturn is using distributed science operations for developing their experiments. Remote scientists needed the ability to: a) Identify observation opportunities; b) Create accurate, detailed designs for their observations; c) Verify that their designs meet their objectives; d) Check their observations against project flight rules and constraints; e) Communicate their observations to other scientists. Many existing tools provide one or more of these functions, but Science Opportunity Analyzer (SOA) has been built to unify these tasks into a single application. Accurate: Utilizes JPL Navigation and Ancillary Information Facility (NAIF) SPICE* software tool kit - Provides high fidelity modeling. - Facilitates rapid adaptation to other flight projects. Portable: Available in Unix, Windows and Linux. Adaptable: Designed to be a multi-mission tool so it can be readily adapted to other flight projects. Implemented in Java, Java 3D and other innovative technologies. Conclusion: SOA is easy to use. It only requires 6 simple steps. SOA's ability to show the same accurate information in multiple ways (multiple visualization formats, data plots, listings and file output) is essential to meet the needs of a diverse, distributed science operations environment.

observation planning operations↗

Analysis of 2015 Winter In-Flight Icing Case Studies with Ground-Based Remote Sensing Systems Compared to In-Situ SLW Sondes

National Aeronautics and Space Administration (NASA) and the National Center for Atmospheric Research (NCAR) have developed an icing remote sensing technology that has demonstrated skill at detecting and classifying icing hazards in a vertical column above an instrumented ground station. This technology has recently been extended to provide volumetric coverage surrounding an airport. Building on the existing vertical pointing system, the new method for providing volumetric coverage utilizes a vertical pointing cloud radar, a multi-frequency microwave radiometer with azimuth and elevation pointing, and a NEXRAD radar. The new terminal area icing remote sensing system processes the data streams from these instruments to derive temperature, liquid water content, and cloud droplet size for each examined point in space. These data are then combined to ultimately provide icing hazard classification along defined approach paths into an airport. To date, statistical comparisons of the vertical profiling technology have been made to Pilot Reports and Icing Forecast Products. With the extension into relatively large area coverage and the output of microphysical properties in addition to icing severity, the use of these comparators is not appropriate and a more rigorous assessment is required. NASA conducted a field campaign during the early months of 2015 to develop a database to enable the assessment of the new terminal area icing remote sensing system and further refinement of terminal area icing weather information technologies in general. In addition to the ground-based remote sensors listed earlier, in-situ icing environment measurements by weather balloons were performed to produce a comprehensive comparison database. Balloon data gathered consisted of temperature, humidity, pressure, super-cooled liquid water content, and 3-D position with time. Comparison data plots of weather balloon and remote measurements, weather balloon flight paths, bulk comparisons of integrated liquid water content and icing cloud extent agreement, and terminal-area hazard displays are presented. Discussions of agreement quality and paths for future development are also included.

aviation meteorology↗

Crew Exploration Vehicle (CEV) (Orion) Occupant Protection

The purpose of this study was to determine the similarity between the response of the THUMS model and the Hybrid III Anthropometric Test Device (ATD) given existing Wright-Patterson (WP) sled tests. There were four tests selected for this comparison with frontal, spinal, rear, and lateral loading. The THUMS was placed in a sled configuration that replicated the WP configuration and the recorded seat acceleration for each test was applied to model seat. Once the modeling simulations were complete, they were compared to the WP results using two methods. The first was a visual inspection of the sled test videos compared to the THUMS d3plot files. This comparison resulted in an assessment of the overall kinematics of the two results. The other comparison was a comparison of the plotted data recorded for both tests. The metrics selected for comparison were seat acceleration, belt forces, head acceleration and chest acceleration. These metrics were recorded in all WP tests and were outputs of the THUMS model. Once the comparison of the THUMS to the WP tests was complete, the THUMS model output was also examined for possible injuries in these scenarios. These outputs included metrics for injury risk to the head, neck, thorax, lumbar spine and lower extremities. The metrics to evaluate head response were peak head acceleration, HIC15, and HIC36. For the neck, N (sub ij) was calculated. The thorax response was evaluated with peak chest acceleration, the Combined Thoracic Index (CTI), sternal deflection, chest deflection, and chest acceleration- 3 ms clip. The lumbar spine response was evaluated with lumbar spine force. Finally the lower extremity response was evaluated by femur and tibia force. The results of the simulation comparisons indicate the THUMS model had a similar response to the Hybrid III dummy given the same input. The primary difference seen between the two was a more flexible response of the THUMS compared to the Hybrid III. This flexibility was most pronounced in the neck flexion, shoulder deflection and chest deflection. Due to the flexibility of the THUMS, the resulting head and chest accelerations tended to lag the Hybrid III acceleration trace and have a lower peak value. The results of the injury metric comparison identified possible injury trends between simulations. Risk of head injury was highest for the lateral simulations. The risk of chest injury was highest for the rear impact. However, neck injury risk was approximately the same for all simulations. The injury metric value for lumbar spine force was highest for the spinal impact. The leg forces were highest for the rear and lateral impacts. The results of this comparison indicate the THUMS model performs in a similar manner as the Hybrid III ATD. The differences in the responses of model and the ATD are primarily due to the flexibility of the THUMS. This flexibility of the THUMS would be a more human like response. Based on the similarity between the two models, the THUMS should be used in further testing to assess risk of injury to the occupant.

Currie-Gregg, Nancy J.↗

Simulating Forest Dynamics of Lowland Rainforests in Eastern Madagascar

Ecological modeling and forecasting are essential tools for the understanding of complex vegetation dynamics. The parametric demands of some of these models are often lacking or scant for threatened ecosystems, particularly in diverse tropical ecosystems. One such ecosystem and also one of the world's biodiversity hotspots, Madagascar's lowland rainforests, have disappeared at an alarming rate. The processes that drive tree species growth and distribution remain as poorly understood as the species themselves. We investigated the application of the process-based individual-based FORMIND model to successfully simulate a Madagascar lowland rainforest using previously collected multi-year forest inventory plot data. We inspected the model's ability to characterize growth and species abundance distributions over the study site, and then validated the model with an independently collected forest-inventory dataset from another lowland rainforest in eastern Madagascar. Following a comparative analysis using inventory data from the two study sites, we found that FORMIND accurately captures the structure and biomass of the study forest, with r(squared) values of 0.976, 0.895, and 0.995 for 1:1 lines comparing observed and simulated values across all plant functional types for aboveground biomass (tonnes/ha), stem numbers, and basal area (m(squared)/ha), respectively. Further, in validation with a second study forest site, FORMIND also compared well, only slightly over-estimating shade-intermediate species as compared to the study site, and slightly under-representing shade-tolerant species in percentage of total aboveground biomass. As an important application of the FORMIND model, we measured the net ecosystem exchange (NEE, in tons of carbon per hectare per year) for 50 ha of simulated forest over a 1000-year run from bare ground. We found that NEE values ranged between 1 and -1 t Cha(exp -1)year(exp -1), consequently the study forest can be considered as a net neutral or a very slight carbon sink ecosystem, after the initial 130 years of growth. Our study found that FORMIND represents a valuable tool toward simulating forest dynamics in the immensely diverse Madagascar rainforests.

Forest Productivity↗

A Multi-scaled Analysis of Forest Structure using Individual-Based Modeling in a Costa Rican Rainforest

Consideration of scale is essential when examining structural relationships in forests. In this study, we present a parameterization of the FORMIND individual-based forest model for old growth Atlantic lowland rainforest in La Selva, Costa Rica. Results show that the simulated forest reproduces the structural complexity of Costa Rican rainforest within 2.3% of aboveground biomass values, based on comparisons with CARBONO inventory plot data. The Costa Rica FORMIND simulation was then used to investigate the relationship between canopy height and aboveground biomass (AGB), leaf area index (LAI) and gross primary productivity (GPP) at different spatial scales (20 × 20 m, 60 × 60 m, 100mx100m). The relationship between aboveground biomass and height is of particular importance toward the calibration of various remote sensing products including lidar and radar, whereas the LAI and GPP relationships are understudied in this context. We found that the relationship between all three variables and height varies considerably: the relationship is stronger at finer scales and weaker at coarser resolution. However, in all three comparisons, RMSE also decreased as scales coarsened, with the largest difference shown between 100 m and 10 m resolutions in relating AGB to Lorey's height (R^2 decreased by 0.3; RMSE decreased by 114.5 Mg/ha). This suggests that a trade-off between accuracy and precision exists, and further highlights the importance of spatial scale in determining the relatability of forest structure variables.

A.H.Armstrong↗

Spatial and Temporal Trends in Precambrian Nitrogen Cycling: A Mesoproterozoic Offshore Nitrate Minimum

Fixed nitrogen is an essential nutrient for eukaryotes. As N2 fixation and assimilation of nitrate are catalyzed by metalloenzymes, it has been hypothesized that in Mesoproterozoic oceans nitrate was limited in offshore environments by low trace metal concentrations and high rates of denitrification in anoxic and episodically euxinic deep water masses, restricting eukaryotes to near-shore environments and limiting their evolutionary innovation. To date this hypothesis has only been tested in the Belt Supergroup (∼1.4 Ga), with results that support an onshore-offshore nitrate gradient as a potential control on eukaryote ecology. Here we present bulk nitrogen and organic carbon isotopic data from non-isochronous cross-basinal facies across the Bangemall (∼1.5 Ga) and the Roper (∼1.4–1.5 Ga) basins to better understand the extent and variability of onshore-offshore nitrogen isotope gradients in the Mesoproterozoic. Both basins show an average ∼1-2‰ enrichment in δ-15N(sub bulk) from deep to shallow facies, with a maximum range from ~1‰ offshore to +7.5‰ onshore. Unlike the Belt basin, the Bangemall and Roper basins show some offshore δ-15N(sub bulk) values that are enriched beyond the isotopic range associated with biological N2 fixation alone. This suggests a mixture of aerobic and anaerobic metabolisms offshore. In shallow waters, where δ-15N(sub bulk) enrichment peaks, an aerobic nitrogen cycle was evidently operating. Even though isotopic signatures of aerobic nitrogen cycling are seen in all parts of the Bangemall and Roper basins, our data are consistent with a lateral gradient in nitrate availability within the photic zone, with higher concentrations in near-shore environments than offshore. The variability in δ-15N(sub bulk) values in each depositional environment and the consistently low δ-15N(sub bulk) values from Mesoproterozoic units compared to the Paleoproterozoic and Neoproterozoic suggest that nitrate concentrations in the global ocean were likely low. This trend is now seen in all three Mesoproterozoic basins so far examined, and contrasts with the Paleoproterozoic and Neoproterozoic where nearly all δ-15N(sub bulk) data plot above the N2 fixation window. Thus, we propose that the Mesoproterozoic ocean was characterized by a nitrate minimum, with the lowest concentrations in offshore environments. This inference is consistent with a Mesoproterozoic O2 decline following a temporary Paleoproterozoic O2 peak, and it further supports the idea that nitrate limitation offshore may have contributed to the restriction of photosynthetic eukaryotes to near-shore environments, delaying their rise to ecological dominance until the Neoproterozoic Era.

Mesoproterozoic↗

Graphical User Interface (GUI) Implementation for Agent-Based Microbial Radiobiology Model

Sending human life past the Low Earth Orbit (LEO) to explore the Moon and Mars will be challenging. The Earth’s magnetic field naturally protects life from deep-space particle radiation such as Galactic Cosmic Rays (GCR) and Solar Particle Events (SPE); these will pose health risks to humans in deep space. Research has been done to investigate these effects, like BioSentinel, the first biological CubeSat to fly beyond the LEO, designed to culture yeast in a microfluidic device and record optical measurements of growth and metabolism. However, experiments can only report cell damage as bulk growth curves, while deep-space radiation causes damage that is heterogeneous among individual cells. AMMPER is an open-source, agent-based, computational model coded in Python to simulate the effects of deep-space radiation on individual yeast cells (Saccharomyces cerevisiae) to facilitate interpretation of biological radiation experiments. Version 1.0 of the code ran in a command line interface (CLI), limiting use to those familiar with modularization, object-oriented programming, and computational models. Here we present a graphical user interface (GUI) for AMMPER to increase its accessibility. GUI development included converting input points and UI files, designing an application and logo, and expanding program packages. Additionally, we added optical assistance that corresponded with simulation parameters, which included simulation type, cell type, ROS model, and radiation dosage, as well as customizable display and file exportation features. Following a pilot testing period, its structure was updated further to enhance abilities, adding increased runs, video visualization, data plotting, and an educational/tutorial component. Future work will include creating a bit installer and runtime environment for AMMPER. Ultimately, the creation of the GUI has two main goals: to facilitate the integration of computational models into the work of researchers in microbial radiobiology, and to act as an interactive and visual resource for space biology education.

yeast↗

Overview of HPM Effects in Electronics

The following presentation contains an overview of HPM effects in modern electronics. HPM effects can be categorized into two basic level of effects, which are damaging and non-damaging. Damaging effects include junction breakdowns, dielectric breakdowns, and latch-up. These types of effects render a system inoperable until repaired. With non-damaging effects, HPM signals couple to into system components generating circuit responses that can overwhelm normal operation. Non-damaging effects can temporarily render a system inoperable or cause a system to lock and require a restart. Since modern systems are so complex, fundamental mechanisms of upset in circuit primitives are studied. All topics covered and all figured contained within are found in open literature. All data plots presented were obtained from experimental measurements conducted at the University of Maryland College Park and are also found in the open literature.

36 MATERIALS SCIENCE↗

EMGeo 3.0

EMGeo 3.0 an algorithm that improves both the computational capabilities of joint 3D electromagnetic, EM and magnetotelluric and acoustic seismic wavefield simulation and inverse modeling. This seismic wavefield module requires that data be transformed first to the Laplace-Fourier Domain before processing. The inverse modeling is based upon non-liner conjugated gradients and 3D finite differences approximations of the seismic, EM and MT wavefields. Improved modeling efficiencies are obtain by separating the modeling grid from the simulation grid. This grid separation method allows for treatment of very large data sets and imaging volumes. Further computational efficiency is obtained by combining different levels of parallezation using the Message Passing Interface (MPI). Bound constraints are employed in the imaging process to insure stability. Additional acceleration of the inverse modeling is achieved by preconditioning the conjugate gradient optimizer using an approximate Hessian. The algorithm includes improved capabilities to accurately treat models that exhibit transverse anisotropy in the electrical conductivity. However, the seismic acoustic velocity is assumed to be isotropic. Models exhibiting topography and bathymetry can be treated. The software also includes a set of pre and post processing tools for designing input model meshes and data plotting.

Gregory Newman, Michael Commer↗

EMGeo-II

An algorithm that improves both the computational capabilities of joint 3D electromagnetic EM and magnetotelluric MT field simulation and inverse modeling. Based upon non-linear conjugate gradients for the imaging component and 3D finite difference methodology for field EM & MT simulation. Improving the modeling efficiency of the algorithm involves the separation of the modeling/imaging grid from the simulation grid. This grid separation method allows for the treatment of very large data sets and imaging volumes. Further computational efficiency is obtained by combining different levels of parallelization using the message Passing Interface (MPI). Bound constraints are employed in the imaging process to insure stability. Additional acceleration of the inverse modeling is achieved by preconditions the conjugate gradient optimizer using an approximate Hessian. The algorithm includes improved capabilities to accurately treat models that exhibit transverse anisotropy in electrical conductivity in the presence of topography and bathymetry. Background anisotropic Earth models are assigned to each transmitter-receiver set, results in solutions to the scattering equations at much improved accuracy. The software also incudes a set of pre and post processing tools to designing input model meshes and data plotting.

Newman, Gregory↗

Fulcrum User Interface for Scale 6.2

SCALE 6.2 consolidated the multiple special-purpose graphical user interfaces (GUI) of SCALE 6.1 into a completely new and modern interface called Fulcrum. Fulcrum is a cross-platform GUI designed to create, edit, validate, and visualize SCALE input, output, and data. It is intended to be usable by both novice and experienced SCALE users with an unobtrusive design. This paper presents a summary of Fulcrum capabilities. Specifically, interactive input validation, context-aware auto-completion, navigation, interactive geome-try visualization with mesh results overlay, job execution, data plotting, and highly config-urable workspace layouts will be discussed.

97 MATHEMATICS AND COMPUTING↗

Noodles: Cooking Up Collaborative Visualization

NOODLES is a new cross-domain collaborative visualization and analysis capability being developed at NREL. The NOODLES specification is a minimal protocol that can tie different software packages and platforms together. As an example, a simulation code that speaks this protocol could stream iso-surfaces to an immersive VR space and a web browser. Another example is a team (with some members across the country) classifying and discovering features in a statistical data plot, driven from a researcher's existing Python-based workflow. In this talk, we will discuss some background on the problems that this protocol intends to solve, basic principles of the specification, the current state of supporting libraries, and some demonstrations of the protocol in action.

3D↗

FULCRUM user interface for SCALE 6.2

SCALE 6.2 consolidated the multiple special-purpose graphical user interfaces (GUI) of SCALE 6.1 into a completely new and modern interface called FULCRUM. FULCRUM is a cross-platform GUI designed to create, edit, validate, and visualize SCALE input, output, and data. It is intended to be usable by both novice and experienced SCALE users with an unobtrusive design. This paper presents a summary of FULCRUM capabilities. Specifically, interactive input validation, context-aware auto-completion, navigation, interactive geometry visualization with mesh results overlay, job execution, data plotting, and highly configurable workspace layouts will be discussed. (authors)

97 MATHEMATICS AND COMPUTING↗

Drying Spent Magnox Fuel for Interim Dry Storage

Spent Magnox fuel is usually stored under water for shielding and cooling following use in-reactor, but the storage water can react with Magnox clad fuel and cause corrosion and forms a sludge which generates a secondary waste product. One option to prevent unwanted corrosion and avoid expensive waste management is to dry the wet fuel. This project aims to test a drying process which will convert wet and corroded Magnox fuel to a stable form to demonstrate viability for conversion from wet to dry storage. Samples of corroded Magnox supplied by National Nuclear Laboratory. Corrosion product retrieved by various methods including dry scraping, ultrasonic treatment to form sludge and sludge drying to isolate suspension. TGA undertaken on Sample 1 and Sample 2, with brucite and hydromagnesite for comparison. Both samples showed ∼10% mass loss up to 250 deg. C attributable to water held in sample. Mass loss from dehydroxylation which liberates further water in both samples. TGA data plotted alongside chemically pure brucite and hydromagnesite shows expected similarities/differences between Sample 1(mostly brucite) and Sample 2 (brucite/hydromagnesite mixture). Following treatment, dried samples observed to slowly gain mass in ambient conditions. Presumed to be hygroscopic absorption of air water vapour as effect is reversible, with similar effect observed for hydromagnesite and brucite. Etched Magnox vacuum dried for 3.5 h at 90 deg. C to test for reaction with residual water - some discoloration but no noticeable corrosion observed. Drying etched Magnox metal to observe surface effects/corrosion during drying process.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Description of a FORTRAN subroutine for plotting three-dimensional data

A FORTRAN subroutine is described which provides the capability to plot three-dimensional data on an interactive cathode-ray-tube computer terminal or conventional plotter. The plotted data, which must be described in terms of a series of two-dimensional curves, appeared to form a surface in three-dimensional space. Features are included of the subroutine's capability for hidden-line computations. User instructions and sample programs are described.

James, M. R.↗

Plotting XPS Narrow Scans (and other Data) with MATLAB’s Powerful Plotting Capabilities, 2. An Introduction to Handle Graphics

The graphical representation of numerical data plays a vital role in chemistry, materials science, and every other scientific field. No matter how good your results are, poorly represented data can ultimately make your work confusing. Indeed, with an increase in the amount of data that is being gathered, e.g., by the Materials Genome Initiative, or in X-ray photoelectron spectroscopy (XPS) or time-of-flight secondary ion mass spectrometry (ToF-SIMS) depth profiles, the importance of effectively representing data has increased. Good figures also matter because many researchers will not look at more than the title, abstract, and perhaps a few key figures from a paper.

42 ENGINEERING↗