Search NASA⌕ Search

SEARCH · Search NASA

Results for “Diffraction pattern”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Single-differential and integral cross sections for electron-impact ionization for the damage of carbon clusters irradiated with x-ray free-electron lasers

Single-differential and integral cross sections for electron-impact ionization of the C atom and its ions were calculated with the binary-encounter-dipole model [Y.-K. Kim and M. E. Rudd, Phys. Rev. A 50, 3954 (1994)] to study the distribution of free-electron energies in carbon clusters after being irradiated with an x-ray free-electron laser (XFEL). The averaged energies of the secondary electrons for the C atom, and C{sup 1+}, C{sup 2+}, and C{sup 3+} ions were about 20, 70, 160, and 200 eV, respectively, when incident electron energy was about 20 keV, while those energies were in the order of tens of electronvolts when the incident electron energy was about 250 eV. The damage to carbon clusters irradiated with the XFEL was also investigated with time-dependent rate equations, considering photoionization, Compton scattering, Auger decay, and electron-impact ionization of the C atom and its ions. The results show that the electron-impact ionization becomes a more important process as the x-ray flux decreases, while the effect of Auger decay gradually appears as the x-ray flux increases. The energy dependence of the incident x ray was also investigated to evaluate the resolution of the diffraction pattern. These results indicate that we should make the XFEL pulse a few fs and about 16 keV to suppress damage and obtain desired resolution of the diffraction pattern.

74 ATOMIC AND MOLECULAR PHYSICS↗

High Pressure X-Ray Diffraction Studies of Nanocrystalline Materials

Experimental evidence obtained for a variety of nanocrystalline materials suggest that the crystallographic structure of a very small size particle deviates from that in the bulk crystals. In this paper we show the effect of the surface of nanocrystals on their structure by the analysis of generation and distribution of macro- and micro-strains at high pressures and their dependence on the grain size in nanocrystalline powders of Sic. We studied the structure of Sic nanocrystals by in-situ high-pressure powder diffraction technique using synchrotron and neutron sources and hydrostatic or isostatic pressure conditions. The diffraction measurements were done in HASYLAB at DESY using a Diamond Anvil Cell (DAC) in the energy dispersive geometry in the diffraction vector range up to 3.5 - 4/A and under pressures up to 50 GPa at room temperature. In-situ high pressure neutron diffraction measurements were done at LANSCE in Los Alamos National Laboratory using the HIPD and HIPPO diffractometers with the Paris-Edinburgh and TAP-98 cells, respectively, in the diffraction vector range up to 26 Examination of the response of the material to external stresses requires nonstandard methodology of the materials characterization and description. Although every diffraction pattern contains a complete information on macro- and micro-strains, a high pressure experiment can reveal only those factors which contribute to the characteristic diffraction patterns of the crystalline phases present in the sample. The elastic properties of powders with the grain size from several nm to micrometers were examined using three methodologies: (l), the analysis of positions and widths of individual Bragg reflections (used for calculating macro- and micro-strains generated during densification) [I], (2). the analysis of the dependence of the experimental apparent lattice parameter, alp, on the diffraction vector Q [2], and (3), the atomic Pair Distribution Function (PDF) technique [3]. The results of our studies show, that Sic nanocrystals have the features of two phases, each with its distinct elastic properties. and under pressures up to 8 GPa.

Palosz, B.↗

Simulations of X-ray diffraction of shock-compressed single-crystal tantalum with synchrotron undulator sources

Polychromatic synchrotron undulator X-ray sources are useful for ultrafast single-crystal diffraction under shock compression. Here, simulations of X-ray diffraction of shock-compressed single-crystal tantalum with realistic undulator sources are reported, based on large-scale molecular dynamics simulations. Purely elastic deformation, elastic–plastic two-wave structure, and severe plastic deformation under different impact velocities are explored, as well as an edge release case. Transmission-mode diffraction simulations consider crystallographic orientation, loading direction, incident beam direction, X-ray spectrum bandwidth and realistic detector size. Diffraction patterns and reciprocal space nodes are obtained from atomic configurations for different loading (elastic and plastic) and detection conditions, and interpretation of the diffraction patterns is discussed.

Tang, M. X.↗

Single-frame far-field diffractive imaging with randomized illumination

Contains two transmission ptychography datasets, one collected from a Siemens star, and the second from an Fe/Gd multilayer. Both samples are under illumination from the same randomized zone plate. Each dataset has a single diffraction pattern removed, and these patterns are reported in a separate cxi file. Either ptychography dataset can be used for calibration of the probe function, and the remaining diffraction patterns can be reconstructed via randomized probe imaging.

BESSY II↗

Test results from LAGEOS-2 optical characterization using pulsed lasers

The Laser Geodynamic Satellite-2 (LAGEOS-2) has undergone extensive optical testing at NASA Goddard Space Flight Center during 1989. The techniques included measuring the far field diffraction pattern using cw and pulsed lasers. In the pulsed measurement technique, response of the satellite was studied by measuring the far-field diffraction pattern (FFDP) as a function of pulsewidth, wavelength, polarization, position in the FFDP, detector/processing techniques, and satellite orientation. The purpose of the pulsed laser testing was two-fold: (1) to characterize the satellite optical response with the detector and signal processing electronics currently used in most SLR stations using the portable laser ranging standard, and (2) to characterize the satellite response for various conditions using the highest bandwidth optical detector (streak camera) available for the next generation of satellite laser ranging (SLR) technology. The portable ranging standard employed multiple measurement devices and an optical calibration scheme to eliminate range-dependent and amplitude-dependent systematics. These precautions were taken to eliminate/minimize instrumental errors and provide maximum accuracy. For LAGEOS orbit (6000 Km), ground stations are located 34 to 38 Mu radians off the axis of the return signal from the satellite; therefore, an optical mask was used to restrict the field of view (FOV) of detection to this annular region of the FFDP. The two measurement techniques were implemented using an aperture sharing scheme and complemented each other by providing mutual verification.

Varghese, Thomas K.↗

Experimentally Shocked and Altered Basalt: Laboratory Analogs for Calibration of Mars Remote Sensing and In Situ Data

Calcium phosphate (likely chloroapatite) is formed in the alteration experiments and is more abundant in the altered and shocked sample probably due to increased surface area exposed to alteration fluids resulting from shock damage in the form of both brittle and structural deformation to the starting material (Figs 1 & 3). Apatite forms in basic conditions so the closed system alteration experiment must be buffered by the basalt starting material to create a fluid chemistry environment evolving from neutral at the start to alkaline after 21 days at 160 degrees Centigrade. Plagioclase feldspar in the unshocked sample (Fig. 2) has undergone a solid-state transformation to maskelynite, a disordered phase that is not manifest in the X-ray diffraction pattern of the shocked sample (Fig.4). Olivine and ulvospinel that are present in the starting material can be detected by X-ray diffraction in the shocked and altered sample (Fig. 4). Tungsten from the sample holder used in the shock experiments dominates the X-ray diffraction pattern of the shocked and altered sample (Fig. 4). Samples were weighed after the alteration experiments to determine mass loss and predict the amount of material available for the planned analyses from the shock experiments. Within the constraints of these experiments, mass loss is negligible. The samples will next be characterized by Moessbauer and Vis-Near Infrared spectroscopy, the results of which will be compared to the Mars Exploration Rovers and Mars Reconnaissance Orbiter data sets respectively.

Bell, M. S.↗

In-line holographic imaging and electron density extraction of ultrafast ionized air filaments

In-line spatial holographic methods are used to image the optical diffraction patterns of ultrafast laser produced plasma filaments in air. Using femtosecond laser pump-probe methods the plasma filament is produced and subsequently probed by a time-delayed probe beam traversing the filament at a right angle. The resulting probe beam image is recorded as a holographic diffraction pattern on a charge coupled device camera as the probe beam is diffracted due to the optical index change caused by the plasma filament. Extraction of the electron density in the filament down to 10{sup 16} cm{sup -3} is obtained by using the Helmholtz wave equation beam propagation model to simulate the data. By varying the pump-probe optical time delay, a plasma electron recombination time of approximately 250 ps is measured and agrees with our rate equation population kinetics model.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Imaging mesoscopic antiferromagnetic spin textures in the dilute limit from single-geometry resonant coherent x-ray diffraction

The detection and manipulation of antiferromagnetic domains and topological antiferromagnetic textures are of central interest to solid-state physics. A fundamental step is identifying tools to probe the mesoscopic texture of an antiferromagnetic order parameter. In this work, we demonstrate that Bragg coherent diffractive imaging can be extended to study the mesoscopic texture of an antiferromagnetic order parameter using resonant magnetic x-ray scattering. We study the onset of the antiferromagnet transition in PrNiO 3 , focusing on a temperature regime in which the antiferromagnetic domains are dilute in the beam spot and the coherent diffraction pattern modulating the antiferromagnetic peak is greatly simplified. We demonstrate that it is possible to extract the arrangements and sizes of these domains from single diffraction patterns and show that the approach could be extended to a time-structured light source to study the motion of dilute domains or the motion of topological defects in an antiferromagnetic spin texture.

36 MATERIALS SCIENCE↗

On the origin of ringing irregularities - A meteor hypothesis

Isolated ionospheric irregularities produce oscillating diffraction patterns on the ground. In the present study typical physical properties such as density, size, etc. of these irregularities are estimated on the basis of diffraction pattern characteristics. These properties agree well with those of meteor trail ionization and it has been found that most of these oscillating irregularities occur on meteor shower days. It is therefore suggested that the oscillating irregularities are caused by meteor showers.

Deshpande, M. R.↗

Reflector antennas with low sidelobes, low cross polarization, and high aperture efficiency

Techniques are presented for computing the horn near field patterns on the subreflectors and for correcting the phase center errors of the horn pattern by shaping the subreflector surface. The diffraction pattern computations for scanned beams are described. The effects of dish aperture diffraction on pattern bandwidth are investigated. A model antenna consisting of a reflector, shaped subreflector, and corrugated feed horn is described.

Faigen, I. M.↗

Neutron diffraction study of the formation of ordered antiphase domains in cubic titanium carbide TiC{sub 0.60}

A series of superstructural reflections (described within the sp. gr. Fd3m) are found to be split into three symmetric parts in the neutron powder diffraction pattern of titanium carbide TiC{sub 0.60} annealed at a temperature of 600 Degree-Sign C. No splitting of superstructural reflections is observed in the neutron diffraction pattern of TiC{sub 0.60} annealed at relatively high temperatures (780 Degree-Sign C). This phenomenon can be explained by that fact that the ordering of carbon atoms at relatively high temperatures (780 Degree-Sign C) is accompanied by the formation of randomly oriented rather large antiphase domains (APDs) (450 A). At relatively low temperatures (600 Degree-Sign C), stacking faults arise in the arrangement of partially ordered carbon atoms. In this case, relatively small ordered APDs (290 A) are formed, along with disordered ones.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Diffraction of swift atoms after grazing scattering from metal surfaces: N/Ag(111) system

Diffraction patterns produced by grazing scattering of fast N atoms from a Ag(111) surface are investigated by employing the surface eikonal approximation. This method is a distorted-wave theory that takes into account the coherent addition of contributions coming from different projectile paths. In the model the projectile-surface potential is obtained from an accurate density-functional theory calculation. The dependence of the scattered projectile spectra on impact energy and incidence channel is analyzed, and possible incident direction and energy range for the observation of the interference patterns are predicted. In addition, it is found that as a result of the high reactivity of N atoms, asymmetries of the surface potential might be detected through their effects on diffraction patterns.

36 MATERIALS SCIENCE↗

Synthesis and spectroscopic characterization of P-doped Na{sub 4}Si{sub 4}

Na{sub 4}Si{sub 4} is a Zintl salt composed of Na{sup +} cations and Si{sub 4}{sup 4-} tetrahedral anions and is a unique solid-state precursor to clathrate structures and nanomaterials. In order to provide opportunities for the synthesis of complex materials, phosphorus was explored as a possible substituent for silicon. Phosphorus doped sodium silicides Na{sub 4}Si{sub 4-x}P{sub x} (x{<=}0.04) were prepared by reaction of Na with the mechanically alloyed Si{sub 4-x}:P{sub x} (x=0.04, 0.08, 0.12) mixture in a sealed Nb tube at 650 {sup o}C for 3 days. Energy dispersive X-ray spectroscopy confirms the presence of P in all products. Powder X-ray diffraction patterns are consistent with the retention of the Na{sub 4}Si{sub 4} crystal structure. As the amount of P increases, a new peak in the diffraction pattern that can be assigned to black phosphorus is apparent above the background. Raman and solid-state NMR provide information on phosphorus substitution in the Na{sub 4}Si{sub 4} structure. Raman spectroscopy shows a shift of the most intense band assigned to the Si{sub 4}{sup 4-} {nu}{sub 1} (A{sub 1}) mode from 486.4 to 484.0 cm{sup -1} with increasing P, consistent with P replacement of Si. Differential nuclear spin-lattice relaxation for the Si sites determined via {sup 29}Si solid-state NMR provides direct evidence for Si-P bonding in the (Si{sub 1-x}P{sub x}){sup 4-} tetrahedron. The {sup 23}Na NMR shows additional Na...P interactions and the {sup 31}P NMR shows two P sites, consistent with P presence in both of the crystallographic sites in the (Si{sub 4}){sup 4-} tetrahedron. - Graphical abstract: P-doped Na{sub 4}Si{sub 4} has been prepared and Raman spectroscopy and {sup 29}Si, {sup 23}Na, and {sup 31}P multinuclear NMR show that P dopes into both crystallographic sites for Si. Display Omitted

36 MATERIALS SCIENCE↗

3D diffractive imaging of nanoparticle ensembles using an x-ray laser

Single particle imaging at x-ray free electron lasers (XFELs) has the potential to determine the structure and dynamics of single biomolecules at room temperature. Two major hurdles have prevented this potential from being reached, namely, the collection of sufficient high-quality diffraction patterns and robust computational purification to overcome structural heterogeneity. We report the breaking of both of these barriers using gold nanoparticle test samples, recording around 10 million diffraction patterns at the European XFEL and structurally and orientationally sorting the patterns to obtain better than 3-nm-resolution 3D reconstructions for each of four samples. With these new developments, integrating advancements in x-ray sources, fast-framing detectors, efficient sample delivery, and data analysis algorithms, we illuminate the path towards sub-nanometer biomolecular imaging. The methods developed here can also be extended to characterize ensembles that are inherently diverse to obtain their full structural landscape.

47 OTHER INSTRUMENTATION↗

HiSPoD : a program for high-speed polychromatic X-ray diffraction experiments and data analysis on polycrystalline samples

Here, a high-speed X-ray diffraction technique was recently developed at the 32-ID-B beamline of the Advanced Photon Source for studying highly dynamic, yet non-repeatable and irreversible, materials processes. In experiments, the microstructure evolution in a single material event is probed by recording a series of diffraction patterns with extremely short exposure time and high frame rate. Owing to the limited flux in a short pulse and the polychromatic nature of the incident X-rays, analysis of the diffraction data is challenging. Here, HiSPoD , a stand-alone Matlab-based software for analyzing the polychromatic X-ray diffraction data from polycrystalline samples, is described. With HiSPoD , researchers are able to perform diffraction peak indexing, extraction of one-dimensional intensity profiles by integrating a two-dimensional diffraction pattern, and, more importantly, quantitative numerical simulations to obtain precise sample structure information.

36 MATERIALS SCIENCE↗

Resolution extension by image summing in serial femtosecond crystallography of two-dimensional membrane-protein crystals

Previous proof-of-concept measurements on single-layer two-dimensional membrane-protein crystals performed at X-ray free-electron lasers (FELs) have demonstrated that the collection of meaningful diffraction patterns, which is not possible at synchrotrons because of radiation-damage issues, is feasible. Here, the results obtained from the analysis of a thousand single-shot, roomtemperature X-ray FEL diffraction images from two-dimensional crystals of a bacteriorhodopsin mutant are reported in detail. The high redundancy in the measurements boosts the intensity signal-to-noise ratio, so that the values of the diffracted intensities can be reliably determined down to the detector-edge resolution of 4 A ° . The results show that two-dimensional serial crystallography at X-ray FELs is a suitable method to study membrane proteins to near-atomic length scales at ambient temperature. The method presented here can be extended to pump–probe studies of optically triggered structural changes on submillisecond timescales in two-dimensional crystals, which allow functionally relevant large-scale motions that may be quenched in three-dimensional crystals.

serial crystallography, free-electron lasers, memb↗

Precision lattice parameter determination from transmission diffraction of thick specimens with irregular cross sections

Accurate determination of lattice parameters from X-ray diffraction requires that the diffraction angles be measured very precisely, and significant errors result if the sample–detector separation differs from that assumed. Transmission diffraction from bones, which have a complex cross section and must be left intact, is a situation where this separation is difficult to measure and it may differ from position to position across the specimen. Here, this article describes a method for eliminating the effect of variable sample cross section. Diffraction patterns for each position on the specimen are collected before and after 180° rotation about an axis normal to the cross section of interest. This places the centroid of the diffracting mass at the center of rotation and provides the absolute lattice parameters from the average apparent lattice parameters at the two rotation angles. Diffraction patterns were collected across the cross section of three specimens: a 3D-printed elliptical cylinder of Hyperelastic Bone (HB), which is composed primarily of synthetic hydroxyapatite (hAp), a 3D-printed HB model of the second metacarpal bone (Mc2), and a modern human Mc2 containing nanocrystalline carbonated apatite (cAp). Rietveld refinement was used to determine precise unit-cell parameters a apparent and c apparent for each pattern of each scan, and these values determined the actual average < a > and < c > for each sample. In conclusion, the results indicate that the 0°/180° rotation method works well enough to uncover variations approaching 1 × 10 -3 Å in cAp unit-cell parameters in intact bones with irregular cross sections.

36 MATERIALS SCIENCE↗

Insight into cation disorder of Li{sub 2}Fe{sub 0.5}Mn{sub 0.5}SiO{sub 4}

Transition metal lithium orthosilicates are promising cathode materials for lithium-ion batteries. Here we report a combined experimental (in situ X-ray diffraction) and computational (static lattice and molecular dynamics) study of the thermal behavior of the Li{sub 2}Fe{sub 0.5}Mn{sub 0.5}SiO{sub 4} orthosilicate from room temperature to 950 °C. Our X-ray results showed that Pmnb polymorph is the most stable all over the explored temperature range. A significant cation disorder up to 80%, based on the anti-site defect, was found. The defect concentration depends on the synthesis route and temperature, and is completely reversible after the thermal treatments. Moreover, a careful analysis of the impurity phases allowed us to identify Li{sub 2}SiO{sub 3}, Fe{sub 3}O{sub 4} and Li{sub 3}Fe{sub 5}O{sub 8}, the last one never reported before. The minimization of defects by opportunely tuning the synthetic parameters would be of great importance in view of potential applications of these materials in lithium batteries. - Graphical abstract: A combined experimental in situ X-ray diffraction and computational study of the thermal behavior of the Li{sub 2}Fe{sub 0.5}Mn{sub 0.5}SiO{sub 4} is reported herein. The anti-site defect does justify the diffraction patterns changes with temperature. Highlights: ► Study of the thermal behavior of Li{sub 2}Fe{sub 0.5}Mn{sub 0.5}SiO{sub 4}. ► The anti-site defect does justify the diffraction patterns changes with temperature. ► The Pmnb polymorph is stable in the investigated temperaturerange.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗