Search NASA⌕ Search

SEARCH · Search NASA

Results for “Diffuser”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

An experimental and analytical investigation of axisymmetric diffusers

A finite difference computer program for turbulent compressible flow was used to establish the performance of several diffuser shapes for experimental testing. The diffusers were designed to have a linear change in Mach number, a linear change in pressure or a curvature fitted by a quadratic equation. Testing was performed with M = 0.1 to 0.9 with and without boundary layer bleed. Above M = 0.6, data were obtained with a normal shock upstream of the diffuser entrance. Peak static pressure recovery occurred with a diffuser inlet M-0.75. The quadratic diffuser yielded the highest total pressure recovery.

Povinelli, L. A.↗

Diffused waveguiding capillary tube with distributed feedback for a gas laser

For use in a waveguide gas laser, a capillary tube of glass or ceramic has an inner surface defining a longitudinal capillary opening through which the laser gas flows. At least a portion of the inner surface is corrugated with corrugations or channels with a periodicity Lambda where Lambda = 1/2 Lambda, Lambda being the laser gas wavelength. The tube includes a diffused region extending outwardly from the opening. The diffused region of a depth d on the order of 1 Lambda to 3 Lambda acts as a waveguide for the waves, with the corrugations producing distributed feedback. The evanescent component of the waves traveling in the diffused region interact with the laser gas in the opening, gaining energy, and thereby amplifying the waves travelling in the diffused region, which exit the diffused region, surrounding the opening, as a beam of wavelength Lambda.

Elachi, C.↗

Two-dimensional hygrothermal diffusions into a finite width composite laminate

Two dimensional hygroscopic diffusion into composite laminates with free edges was obtained through the use of a second order finite difference scheme. A computer program was developed for the transient nonlinear coupled hygrothermal diffusion into finite width laminates with varying surface conditions along two edges. The formulation permits the diffusion coefficient to be a function of temperature, moisture concentration, and fiber orientation. The moisture distributions thus obtained are necessary for analysis of the moisture induced interlaminar stresses in the vicinity of free edges. It is shown that large diffusion times tend to eliminate the significance of stacking sequence, but gradients within and between layers are significant for all diffusion times.

Farley, G. L.↗

Some basic mathematical methods of diffusion theory

An introductory treatment of the fundamentals of diffusion theory is presented, starting with molecular diffusion and leading up to the statistical methods of turbulent diffusion. A multilayer diffusion model, designed to permit concentration and dosage calculations downwind of toxic clouds from rocket vehicles, is described. The concepts and equations of diffusion are developed on an elementary level, with emphasis on atmospheric applications.

Giere, A. C.↗

The velocity correlation function in cosmic-ray diffusion theory

It is shown that Earl's (1973) eigenvalue sum for the cosmic-ray spatial diffusion coefficient parallel to the mean magnetic field is precisely equivalent to the time integral of the particle-velocity correlation function parallel to the mean field. A derivation due to Kubo (1957) is applied to cosmic-ray pitch-angle scattering, and it is proven that all nine components of the cosmic-ray diffusion tensor can be expressed as integrals over the velocity correlation function. A pitch-angle correlation function is derived, and the effect of long-wavelength turbulence on the velocity correlation function and spatial diffusion coefficients is examined. Application of the velocity-correlation method to a realistic case involving both pitch-angle scattering and appreciable fluctuation in the direction of the local field indicates that long-wavelength turbulence in the local field reduces the parallel diffusion coefficient and places an upper limit on the ratio of the perpendicular to parallel diffusion coefficients.

Forman, M. A.↗

Determination of the zincate diffusion coefficient and its application to alkaline battery problems

The diffusion coefficient for the zincate ion at 24 C was found to be 9.9 X 10 to the minus 7th power squared cm per sec + or - 30 percent in 45 percent potassium hydroxide and 1.4 x 10 to the minus 7 squared cm per sec + or - 25 percent in 40 percent sodium hydroxide. Comparison of these values with literature values at different potassium hydroxide concentrations show that the Stokes-Einstein equation is obeyed. The diffusion coefficient is characteristic of the zincate ion (not the cation) and independent of its concentration. Calculations with the measured value of the diffusion coefficient show that the zinc concentration in an alkaline zincate half cell becomes uniform throughout in tens of hours by diffusion alone. Diffusion equations are derived which are applicable to finite size chambers. Details and discussion of the experimental method are also given.

May, C. E.↗

Performance of a short annular dump diffuser using suction-stabilized vortices at inlet Mach numbers to 0.41

A short, annular dump diffuser was designed to use suction to establish stabilized vortices on both walls for improved flow expansion in the region of an abrupt area change. The diffuser was tested at near ambient inlet pressure and temperature. The overall diffuser area ratio was 4.0. The inlet height was 2.54 cm and the exit pitot-static rakes were located at a distance from the vortex fence equal to two or six times the inlet height. Performance data were taken at near ambient temperature and pressure for nominal inlet Mach numbers of 0.18 to 0.41 with suction rates of 0 to 18 percent of the total inlet airflow. The exit velocity profile could be shifted toward either wall by adjusting the inner- or outer-wall suction rate. Symmetrical exit velocity profiles were unstable, with a tendency to shift back to hub- or tip-weighted profile. Diffuser effectiveness was increased from about 47 percent without suction to over 85 percent at a total suction rate of about 14 percent. The diffuser total pressure losses at inlet Mach numbers of 0.18 and 0.41 decreased from 1.1 and 5.6 percent without suction to 0.48 and 5.2 percent at total suction rates of 14.4 and 5.6 percent, respectively.

Smith, J. M.↗

A comparative study of tropospheric ground cloud diffusion models

Calculated values obtained from several diffusion models are compared with field measurements. The diffusion models that are examined include: NASA/MSFC multilayer diffusion models, the meteorological effluent transport simulation model, the TREATS model, the atmsopheric diffusion particle in cell model, and a model for diffusion in shear flow (DISF). The atmospheric turbulence in the PBL turbulent wind field above and below 150 m is calculated. Concentrations calculated from the DISF model are found to correlate, in general, quite well with flight measurements.

Hwang, B.↗

Diffusion and phase change characterization by mass spectrometry

The high temperature diffusion of trace elements in metals and alloys was investigated. Measurements were made by high sensitivity mass spectrometry in which individual atoms were detected, and quantitative data was obtained for zircaloy-2, 304 stainless steel, and tantalum. Additionally, a mass spectrometer was also an analytical tool for determining an allotropic phase change for stainless steel at 955 C, and a phase transition region between 772 C and 1072 C existing for zircaloy-2. Diffusion rates were measured in thin (0.001" (0.0025 cm) and 0.0005" (0.0013 cm)) ribbons which were designed as high temperature thermal ion sources, with the alkali metals as naturally occurring impurities. In the temperature and pressure regime where diffusion measurements were made, the solute atoms evaporated from the ribbon filaments when the impurities diffused to the surface, with a fraction of these impurity atoms ionized according to the Langmuir-Saha relation. The techniques developed can be applied to many other alloys important to space vehicles and supersonic transports; and, with appropriate modifications, to the diffusion of impurities in composites.

Koslin, M. E.↗

Determination of the zincate diffusion coefficient and its application to alkaline battery problems

The diffusion coefficient for the zincate ion at 24 C was found to be 9.9 x 10 to the -7th power sq cm/sec + or - 30% in 45% potassium hydroxide and 1.4 x 10 to the -7th power sq cm/sec + or - 25% in 40% sodium hydroxide. Comparison of these values with literature values at different potassium hydroxide concentrations show that the Stokes-Einstein equation is obeyed. The diffusion coefficient is characteristic of the zincate ion (not the cation) and independent of its concentration. Calculations with the measured value of the diffusion coefficient show that the zinc concentration in an alkaline zincate half-cell becomes uniform throughout in tens of hours by diffusion alone. Diffusion equations are derived which are applicable to finite-size chambers. Details and discussion of the experimental method are also given.

May, C. E.↗

Gravity wave propagation in a diffusively separated atmosphere with height-dependent collision frequencies

Numerical calculations of gravity wave propagation through a two-component thermosphere with vertically-varying inter-species collision frequencies are performed using a direct integration method. Reflection of upgoing gravity wave energy into downgoing gravity waves appears to be small though nonnegligible at typical thermospheric periods and wavelengths. Coupling into diffusion waves is completely insignificant in most cases and may be determined in part by the relative abundance of the minor species. Temperature perturbation differences between species can be greater than 10% above 300 km altitude even though coupling into diffusion waves is small. Diffusive dissipation of gravity wave energy can be significant in the lower thermosphere and may be comparable to dissipation by viscosity and heat conduction below about 225 km altitude. Heating by diffusive dissipation may also be comparable to direct heating by solar radiation in the lower thermosphere. As a result of dissipative filtering of long-period and short-wavelength waves and the sensitivity of He-N2 density perturbation phase differences to diffusion, the AE-C satellite wave observations can only be fit by internal gravity waves with periods no greater than about 25 min and horizontal wavelengths no less than about 200 km.

Del Genio, A. D.↗

Effect of velocity overshoot on the performance of magnetohydrodynamic subsonic diffusers

The evolution of an overshoot velocity distribution was studied in a plane two dimensional diffuser as a function of diffuser divergence angle. The diffuser performance for velocity overshoot was compared to that for a fully developed inlet velocity profile. Results indicate that the ratio of peak-to-center line velocity increases along the diffuser for a diffuser half angle greater than some critical value. It was also found that irrespective of the accompanying inlet temperature distribution, the wall shear stress and the wall heat flux is substantially larger when the inlet velocity profile has an overshoot than that for a fully developed inlet velocity profile.

Greywall, M. S.↗

Vertical and off-diagonal eddy diffusivities in the Northern Hemispheric stratosphere and lower mesosphere

Meteorological rocket soundings, launched between 1968-74 at six locations representative of low, middle and high latitudes in the Northern Hemisphere, are employed to determine the vertical, meridional, and off-diagonal components of the eddy diffusivity in the Northern Hemispheric stratosphere and lower mesosphere. It is shown that the distribution of the vertical and meridional components of the eddy diffusivity are similar in the Northern Hemisphere, although the magnitude of the former is ten million times smaller than that of the latter; the magnitude of the off-diagonal eddy diffusivity is about one thousand times smaller than that of the meridional eddy diffusivity. In the troposphere, a maximum eddy diffusivity occurs in the mid-latitude at about 7 km above the mean sea level for both the summer and winter seasons.

Kao, S. K.↗

Thermally grown oxide and diffusions for automatic processing of integrated circuits

A totally automated facility for semiconductor oxidation and diffusion was developed using a state-of-the-art diffusion furnace and high temperature grown oxides. Major innovations include: (1) a process controller specifically for semiconductor processing; (2) an automatic loading system to accept wafers from an air track, insert them into a quartz carrier and then place the carrier on a paddle for insertion into the furnace; (3) automatic unloading of the wafers back onto the air track, and (4) boron diffusion using diborane with plus or minus 5 percent uniformity. Processes demonstrated include Wet and dry oxidation for general use and for gate oxide, boron diffusion, phosphorous diffusion, and sintering.

Kennedy, B. W.↗

Effects of diffusion and mass flows on C IV and Si IV lines formed in the solar atmosphere

A model for the transition region is derived from an initial interpretation of EUV observations, assuming ionization equilibrium and constant elemental abundance with height. The effects of diffusion and mass flows are then included in the initial model and the emergent profiles of several C IV and Si IV lines are computed. It is found that diffusion and mass flows have a strong effect on both the emergent intensity and spectral shape of these lines. Diffusion acts to deplete the transition region of heavy ions to an extent which depends on the detailed temperature and density structure. The net effect is a weighting of the coronal emission relative to that in the transition. On the basis of the results, it is suggested that the downflows observed in the network in lines of C IV and Si IV could be due to gravitational settling of the ions following their injection, via diffusion, into the corona from spicules. When flows are superposed on the basic diffusion model, the rapid change in elemental abundance characteristic of the model is virtually eliminated and the coronal contribution to the emission in C IV and Si IV lines becomes negligible relative to that in the transition region. Flows have a strong effect on the computed line intensities and introduce large asymmetries into the line shapes.

Roussel-Dupre, R.↗

On the energy dependence of the radial diffusion coefficient and spectra of inner radiation belt particles - Analytic solutions and comparison with numerical results

A theoretical method by which the energy dependence of the radial diffusion coefficient may be deduced from spectral observations of the particle population at the inner edge of the earth's radiation belts is presented. This region has previously been analyzed with numerical techniques; in this report an analytical treatment that illustrates characteristic limiting cases in the L shell range where the time scale of Coulomb losses is substantially shorter than that of radial diffusion (L approximately 1-2) is given. It is demonstrated both analytically and numerically that the particle spectra there are shaped by the energy dependence of the radial diffusion coefficient regardless of the spectral shapes of the particle populations diffusing inward from the outer radiation zone, so that from observed spectra the energy dependence of the diffusion coefficient can be determined. To insure realistic simulations, inner zone data obtained from experiments on the DIAL, AZUR, and ESRO 2 spacecraft have been used as boundary conditions. Excellent agreement between analytic and numerical results is reported.

Westphalen, H.↗

Vertical eddy diffusion coefficient from the LANDSAT imagery

Analysis of five stable cases of the smoke plumes that originated in eastern Cabo Frio (22 deg 59'S; 42 deg 02'W), Brazil using LANDSAT imagery is presented for different months and years. From these images the lateral standard deviation (sigma sub y) and the lateral eddy diffusion coefficient (K sub y) are obtained from the formula based on Taylor's theory of diffusion by continuous moment. The rate of kinetic energy dissipation (e) is evaluated from the diffusion parameters sigma sub y and K sub y. Then, the vertical diffusion coefficient (K sub z) is estimated using Weinstock's formulation. These results agree well with the previous experimental values obtained over water surfaces by various workers. Values of e and K sub z show the weaker mixing processes in the marine stable boundary layer. The data sample is apparently to small to include representative active turbulent regions because such regions are so intermittent in time and in space. These results form a data base for use in the development and validation of mesoscale atmospheric diffusion models.

Viswanadham, Y.↗

Search for selective ion diffusion through membranes

The diffusion rates of several ions through some membranes developed as battery separators were measured. The ions investigated were Li(+), Rb(+), Cl(-), and So4. The members were crosslinked polyvinyl alcohol, crosslinked polyacrylic acid, a copolymer of the two, crosslinked calcium polyacrylate, cellulose, and several microporous polyphenylene oxide based films. No true specificity for diffusion of any of these ions was found for any of the membranes. But the calcium polyacrylate membrane was found to exhibit ion exchange with the diffusing ions giving rise to the leaching of the calcium ion and low reproducibility. These findings contrast earlier work where the calcium polyacrylate membrane did show specificity to the diffusion of the copper ion. In general, Fick's law appeared to be obeyed. Except for the microporous membranes, the coefficients for ion diffusion through the membranes were comparable with their values in water. For the microporous membranes, the values found for the coefficients were much less, due to the tortuosity of the micropores.

May, C. E.↗