Search NASA⌕ Search

SEARCH · Search NASA

Results for “Display Development”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Electrochemically in situ formed rocksalt phase in titanium dioxide determines pseudocapacitive sodium-ion storage

Earth-abundant TiO 2 is a promising negative electrode for low-cost sodium-ion batteries (SIBs) owing to its high capacity, rapid (dis)charging capability, safe operation potential and nonflammability. Crystalline anatase TiO 2 is not suitable for reversible Na + (de)intercalation, but it displays pseudocapacitive response after repeated cycles. Herein, we find and demonstrate that ordered rocksalt (RS) NaTiO 2 nanograins are in situ formed by electrochemically cycling with Na + ions in anatase and amorphous TiO 2 . The in situ formed RS-NaTiO 2 follows a solid-solution reaction with small volume changes of only 2.0%, that determines the pseudocapacitive “mirror-like” cyclic voltammetry curve with a couple of broad redox peaks at 0.75 V vs. Na + /Na, a high capacity of 253 mAh g −1 , high-rate capability and thousands of stable cycles. The multistep crystalline-to-amorphous-to-RS transformations are able to be electrochemically activated during the aging process of assembled full cells. Our finding provides a direction for developing unconventional Ti-based high-performance active materials for SIBs with both high energy and power densities.

Tang, Dafu [Xiamen University (China); Innovation ↗
DOE OSTI2024

Solar enhanced oxygen evolution reaction with transition metal telluride

The photo-enhanced electrocatalytic method of oxygen evolution reaction (OER) shows promise for enhancing the effectiveness of clear energy generation through water splitting by using renewable and sustainable source of energy. However, despite benefits of photoelectrocatalytic (PEC) water splitting, its uses are constrained by its low efficiency as a result of charge carrier recombination, a large overpotential, and sluggish reaction kinetics. Here, we illustrate that Nickel telluride (NiTe) synthesized by hydrothermal methods can function as an extremely effective photo-coupled electrochemical oxygen evolution reaction (POER) catalyst. In this study, NiTe was synthesized by hydrothermal method at 145°C within just an hour of reaction time. In dark conditions, the NiTe deposited on carbon cloth substrate shows a small oxygen evolution reaction overpotential (261 mV) at a current density of 10 mA cm –2 , a reduced Tafel slope (65.4 mV dec -1 ), and negligible activity decay after 12 h of chronoamperometry. By virtue of its enhanced photo response, excellent light harvesting ability, and increased interfacial kinetics of charge separation, the NiTe electrode under simulated solar illumination displays exceptional photoelectrochemical performance exhibiting overpotential of 165 mV at current density of 10 mA cm -2 , which is about 96 mV less than on dark conditions. In addition, Density Functional Theory investigations have been carried out on the NiTe surface, the results of which demonstrated a greater adsorption energy for intermediate -OH on the catalyst site. Since the -OH adsorption on the catalyst site correlates to catalyst activation, it indicates the facile electrocatalytic activity of NiTe owing to favorable catalyst activation. DFT calculations also revealed the facile charge density redistribution following intermediate -OH adsorption on the NiTe surface. This work demonstrates that arrays of NiTe elongated nanostructure are a promising option for both electrochemical and photoelectrocatalytic water oxidation and offers broad suggestions for developing effective PEC devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

3D printed carbon fiber reinforced carbon as an energy efficient alternative to graphite for EFAS tooling

As Electric Field Assisted Sintering (EFAS) gains more industrial acceptance and use, it becomes more important to develop more efficient means to implement this technology. To this aim, 3D printed continuous carbon fiber reinforced carbon (CCC) was manufactured and fabricated into tooling for EFAS systems as an alternative to traditional graphite tooling. The impact of fiber orientation on the thermal and electrical properties of the CCC was characterized. Sample material was sintered in Tokai G535 graphite tooling, under common processing conditions and compared with CCC tooling. There was nearly 50 % energy savings compared to graphite while maintaining equivalent sample density and microstructure plus keeping ram temperatures 39 % cooler. This is due to spatial control of generated heat and thermal diffusivity within the molds, by means of fiber orientation anisotropy. Finite element modeling of the tooling design supported the experimental results as well as displays the effect of optimization of this 3D printed CCC material.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Revisiting the Role of Mobile Ion Size for the Activation Barrier of Charge Transport in Single Ion Conducting Polymers

The development of polymer electrolytes for energy storage and conversion technologies requires a fundamental understanding of the material parameters controlling the energy barriers for ion transport. In glassy polymers, these activation barriers are usually extracted by using Arrhenius procedures. However, our recent studies of single ion conducting polymers reveal that this traditional Arrhenius description provides anomalously small prefactors, an issue that is widely disregarded in the literature. Here, to address it, an alternative approach was introduced for extracting the effective activation barrier E by imposing a physically valid limit (∼10 –13 s) for the ion hopping attempt time. Two consequences of this recent approach are that in polymer electrolytes (i) E is significantly (∼30–40%) lower than the barrier estimated using traditional Arrhenius fits and (ii) E displays significant temperature dependence even in the glassy state. Under these circumstances, we are revisiting the role of ion size, glass transition temperature T g , and dielectric and elastic constants of the polymer matrix on the effective activation barriers for ion transport as extracted using the recently proposed approach and highlight the differences from the picture that previously emerged based on simplistic apparent Arrhenius analysis. To this end, we investigate cation transport in three families of single ion conducting trifluoromethane sulfonimide-based polyanions with varied T g . Our results indicate that E decreases with mobile cation size and is highly sensitive to changes in the dielectric permittivity of the matrix, even for large cations. These insights call for revisions of many earlier results based on apparent Arrhenius fits as the proposed approach can provide more accurate guidance for the design of polymer electrolytes with enhanced ionic conductivity.

energy barrier↗
DOE OSTI2024

Dynamic Behavior of Pt Multimetallic Alloys for Active and Stable Propane Dehydrogenation Catalysts

Improving the use of platinum in propane dehydrogenation catalysts is a crucial aspect to increasing the efficiency and sustainability of propylene production. A known and practiced strategy involves incorporating more abundant metals in supported platinum catalysts, increasing its activity and stability while decreasing the overall loading. Here, using colloidal techniques to control the size and composition of the active phase, we show that Pt/Cu alloy nanoparticles supported on alumina (Pt/Cu/Al 2 O 3 ) displayed elevated rates for propane dehydrogenation at low temperature compared to a monometallic Pt/Al 2 O 3 catalyst. We demonstrate that the enhanced catalytic activity is correlated with a higher surface Cu content and formation of a Pt-rich core and Cu-rich shell that isolates Pt sites and increases their intrinsic activity. However, rates declined on stream because of dynamic metal diffusion processes that led to a more uniform alloy structure. This transformation was only partially inhibited by adding excess hydrogen to the feed stream. Instead, cobalt was introduced to provide trimetallic Pt/Cu/Co catalysts with stabilized surface structure and stable activity and higher rates than the original Pt/Cu system. In conclusion, the structure–activity relationship insights in this work offer improved knowledge of propane dehydrogenation catalyst development featuring reduced Pt loadings and notable thermal stability for propylene production.

Alloys↗
DOE OSTI2024

Efficient Parameterization of Density Functional Tight-Binding for 5 f -Elements: A Th–O Case Study

Density functional tight binding (DFTB) models for f-element species are challenging to parametrize owing to the large number of adjustable parameters. The explicit optimization of the terms entering the semiempirical DFTB Hamiltonian related to f orbitals is crucial to generating a reliable parametrization for f-block elements, because they play import roles in bonding interactions. However, since the number of parameters grows quadratically with the number of orbitals, the computational cost for parameter optimization is much more expensive for the f-elements than for the main group elements. In this work we present a set of efficient approaches for mitigating the hurdle imposed by the large size of the parameter space. A novel group-by-orbital correction functions for two-center bond integrals was developed. With this approach the number of parameters is reduced, and it grows linearly with the number of elements, maintaining the accuracy and the number of parameters, in the case of f elements, by more than 40%. The parameter optimization step was accelerated by means of the mini-batch BFGS method. This method allows parameter optimizations with much larger training sets than other single batch methods. A stochastic optimizer was employed that helped overcome shallow local minima in the objective function. The proposed algorithm was used to parametrize the DFTB Hamiltonian for the Th–O system, which was subsequently applied to the study of ThO 2 nanoparticles. The training set consisted of 6322 unique structures, which is barely feasible with conventional optimization methods. The optimized parameter set, LANL-ThO, displays good agreement with DFT-calculated properties such as energies, forces, and structures for both clusters and bulk ThO 2 . Benefiting from the fewer number of parameters and lower computational costs for objective function evaluations, this new approach shows its potential applications in DFTB parametrization for elements with high angular momentum, which present a challenge to conventional methods.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Probing the Isospin Composition of Short-Range Correlated Pairs at Jefferson Lab Hall B

Nucleons in short-range correlated (SRC) pairs, due to their close proximity and high relative momentum, can provide insight into the short-range part of the strong nuclear interaction. In particular, the prevalence of np pairs is due to the dominance of a tensor term for correlated nucleons with momenta of approximately 400?600 MeV/c. This dissertation comprises two studies advancing the community?s understanding of the isospin composition of SRC pairs. First, I performed a study of proton and neutron knockout from initially low-momentum and high-momentum states in 3He. Previous work has shown that protons are disproportionately represented in high-momentum states in neutron-rich nuclei. I demonstrate that spectral functions for the proton-rich nucleus 3He predict, in agreement with data, that neutrons are disproportionately represented in high-momentum states, but that 3He does not display the same strong prevalence of np pairs that is observed in larger nuclei. Second, Generalized Contact Formalism (GCF), a well-supported theory for predicting SRC behavior, predicts the transition from an isospin-dependent, tensor-dominant interaction at intermediate distances to a scalar-dominant, isospin-independent interaction at very short distances. This dissertation uses data from the CLAS12 Nuclear Targets Experiments in Hall B at Jefferson Lab to measure the relative abundances of pp and pn pairs for increasing relative momentum and decreasing separation. I provide an independent confirmation of the previously-observed increase in pp pairs at increasing momentum of the struck nucleon. I also contribute to the application of the new CLAS12 Central Neutron Detector by precisely measuring the neutron detection efficiency and developing a machine learning model for rejecting charged particle background.

Seroka, Erin↗
DOE OSTI2024

Critical Minerals and Materials Matchmaker-CM3

This is the Critical Minerals and Materials Matchmaker (CM3) survey form. CM3 is an online information resource created to help connect users across the critical minerals and materials supply chain. The survey is designed to allow organizations to self-identify their critical minerals and materials-aligned activities and interests, and an interactive map that displays those on-going activities in a dynamic way. To include your critical minerals management activity or activities in CM3, please open and fill out the Critical Minerals and Materials Survey. If your organization has many ongoing or planned activities that would be onerous to enter in the form, or if your activities are difficult to geolocate (such as a transport network), please email the team at edxspatial@netl.doe.gov. This initiative is aligned with the approach of DOE’s H2 Matchmaker and Carbon Matchmaker. Read more information on H2 Matchmaker and Carbon Matchmaker. Below are some questions to help understand if you should fill out the CM3 survey: Does your company work with elements such as lithium, cobalt, copper, graphite, nickel, rare earth minerals, or platinum group metals? Does your organization have research and development activities related to critical materials or their supply chains? Does your company currently work in the critical minerals or materials supply chain? Do you have prospective work in critical minerals or materials in the next 5 years? Does your company mine, process, refine or distribute critical minerals or materials? Do you want to network with other facilities or organizations working in the same areas? Are you curious about the critical mineral and material activity in your surrounding area? Are you interested in aligning your potential needs across the supply chain to different geographic areas within the U.S? For more information, please see the CM3 website (https://www.energy.gov/fecm/articles/critical-minerals-materials-matchmaker-cm3) or email our team at edxspatial@netl.doe.gov.

CM3↗
DOE OSTI2024

The auxin efflux carrier PIN1a regulates vascular patterning in cereal roots

Barley (Hordeum vulgare) is an important global cereal crop and a model in genetic studies. Despite advances in characterising barley genomic resources, few mutant studies have identified genes controlling root architecture and anatomy, which plays a critical role in capturing soil resources. Our phenotypic screening of a TILLING mutant collection identified line TM5992 exhibiting a short-root phenotype compared with wild-type (WT) Morex background. Outcrossing TM5992 with barley variety Proctor and subsequent SNP array-based bulk segregant analysis, fine mapped the mutation to a cM scale. Exome sequencing pinpointed a mutation in the candidate gene HvPIN1a, further confirming this by analysing independent mutant alleles. Detailed analysis of root growth and anatomy in Hvpin1a mutant alleles exhibited a slower growth rate, shorter apical meristem and striking vascular patterning defects compared to WT. Expression and mutant analyses of PIN1 members in the closely related cereal brachypodium (Brachypodium distachyon) revealed that BdPIN1a and BdPIN1b were redundantly expressed in root vascular tissues but only Bdpin1a mutant allele displayed root vascular defects similar to Hvpin1a. We conclude that barley PIN1 genes have sub-functionalised in cereals, compared to Arabidopsis (Arabidopsis thaliana), where PIN1a sequences control root vascular patterning.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Guided combinatorial synthesis and automated characterization expedites the discovery of hard, electrically conductive Pt x Au 1-x films

Sputter-deposited Pt-Au thin films have been reported to develop a hard, stable, nanocrystalline structure, yet little is known about how these characteristics vary with Pt x Au 1-x composition and process conditions. Toward this end, this document describes an extensive, combinatorial Pt-Au thin film library including characterized film compositions, structure, and properties. Complemented by kinematic Monte Carlo simulations of codeposition, a broad range of Pt x Au 1-x compositions (from x ~ 0.02 to 0.93) was first established by sputtering with varied magnetron powers and gun tilt angles. Further, the produced films were subsequently interrogated using automated nanoindentation, x-ray reflectivity, x-ray diffraction, atomic force microscopy, surface profilometry, four-point probe sheet resistance techniques, and wavelength dispersive spectroscopy in order to determine how hardness, modulus, density, surface roughness, structure, and resistivity vary with film stoichiometry and process parameters. Combinatorial films displayed an assortment of properties with the hardness of some films exceeding values reported previously for this material system. High hardness, high modulus, and low resistivity were generally attained when using increased deposition energy and reduced angle-of-incidence processes. Overall, the research identified promising, new Pt x Au 1-x compositions for future study and pinpointed strategies for improved deposition.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Three-Dimensional Settling Dynamics of Environmental Microplastics

Resolving the three-dimensional settling dynamics of microplastic (MP) particles is essential for developing comprehensive models of MP transport in rivers-both vertically within the water column and laterally across the channel. While previous research has largely examined one-dimensional vertical settling velocities, little is known about the lateral drifting, settling paths, and horizontal velocities of MPs. To address this, we investigated the full three-dimensional settling behavior of environmental MPs collected from rivers and ocean water, as well as from estuarine and ocean sediment. Geometric properties of 127 environmental MPs were quantified by a dynamic particle image analyzer, and their settling trajectories were recorded and reconstructed via a multicamera tracking algorithm. This enabled quantification of a particle's horizontal drift, tortuosity, amplitude and settling pattern, as well as vertical and horizontal velocities. Results showed that spherical MPs settled with minimal lateral displacement, whereas elongated particles, such as rod- and blade-shaped MPs, displayed pronounced lateral movements, reaching up to 65 times their equivalent diameter and averaging more than twice that of spheres. These dynamics suggest that elongated MPs may have a greater probability for wider lateral dispersion in rivers, increasing their likelihood for interactions with riverbanks and channel boundaries compared to more spherical shaped MPs.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Selective CO 2 Reduction by Bis(bipyridine)cobalt(II) Catalysts: The Role of Pendant Pyridine as a Proton Acceptor

Electrochemical CO 2 reduction reaction (CO 2 RR) catalyzed by molecular earth-abundant metal catalysts is a promising strategy to convert CO 2 into value-added products. One recent trend in this field has been focusing on the rational design of catalysts by incorporating redox-active ligands and modifying the secondary coordination sphere (SCS) to achieve efficient and selective CO 2 RR. Herein, we report a series of Co bis­(bipyridine) catalysts featuring various dangling groups, such as pyridine, tertiary amine, or butyl, in the secondary coordination sphere (Co-PyMe, Co-Py, Co-PrN, and Co-Bu). Efficient, selective electrocatalytic CO 2 RR was achieved by the complexes after the generation of triply reduced intermediate consisting of a Co I center and a dianionic ligand, producing CO as the major product and trace amount of H 2 . Strong correlations with the identity of dangling groups and turnover frequency (TOF) have been observed, in which Co-PyMe displayed the highest TOF (1086 s –1 in MeCN/H 2 O). Mechanistic studies indicated that the acceleration of CO 2 RR with pyridine-functionalized catalysts were derived from the protonation of pyridine dangling groups which participated as weak acids in the H-bonding network with exogenous proton sources, stabilizing CO 2 -bound intermediates and facilitating proton transfer. In addition, precatalytic CO 2 binding and activation at the third reduction (−2.1 V) was revealed by CV and SEC-IR studies. The resultant doubly reduced CO-bound species acted as a trapping state which inhibited CO 2 RR electrocatalysis. Regeneration of active species was accessed via reductive dissociation of CO at a more negative potential. In conclusion, this study highlights the combined effects of redox-active ligands and pyridine/pyridinium as SCS groups on CO 2 RR catalysis and provides design principles for future development of CO 2 RR catalysts utilizing pyridine/pyridiniums as SCS functional groups to fine-tune the catalytic activity.

CO2 reduction↗
DOE OSTI2024

Improving Miscibility of Polymer Donor and Polymer Acceptor by Reducing Chain Entanglement for Realizing 18.64 % Efficiency All Polymer Solar Cells

All-polymer solar cells have experienced rapid development in recent years by the emergence of polymerized small molecular acceptors (PSMAs). However, the strong chain entanglements of polymer donors (P D s) and polymer acceptors (P A s) decrease the miscibility of the resulting polymer mixtures, making it challenging to optimize the blend morphology. Herein, we designed three P A s, namely PBTPICm-BDD, PBTPICγ-BDD and PBTPICF-BDD, by smartly using a BDD unit as the polymerized unit to copolymerize with different Y-typed non-fullerene small molecular acceptors (NF-SMAs), thus achieving a certain degree of distortion and giving the polymer system enough internal space to reduce the entanglements of the polymer chains. Such effects increase the chances of the P D being interspersed into the acceptor material, which improve the solubility between the P D and P A . The PBTPICγ-BDD and PBTPICF-BDD displayed better miscibility with PBQx-TCl, leading to a well optimized morphology. As a result, high power conversion efficiencies (PCEs) of 17.50 % and 17.17 % were achieved for PBQx-TCl : PBTPICγ-BDD and PBQx-TCl : PBTPICF-BDD devices, respectively. In conclusion, with the addition of PYFT-o as the third component into PBQx-TCl : PBTPICγ-BDD blend to further extend the absorption spectral coverage and finely tune microstructures of the blend morphology, a remarkable PCE of 18.64 % was realized finally.

36 MATERIALS SCIENCE↗
DOE OSTI2024

The extent of multiallelic, co‐editing of LIGULELESS1 in highly polyploid sugarcane tunes leaf inclination angle and enables selection of the ideotype for biomass yield

Summary Sugarcane ( Saccharum spp. hybrid) is a prime feedstock for commercial production of biofuel and table sugar. Optimizing canopy architecture for improved light capture has great potential for elevating biomass yield. LIGULELESS1 ( LG1 ) is involved in leaf ligule and auricle development in grasses. Here, we report CRISPR/Cas9‐mediated co‐mutagenesis of up to 40 copies/alleles of the putative LG1 in highly polyploid sugarcane (2 n = 100–120, x = 10–12). Next generation sequencing revealed co‐editing frequencies of 7.4%–100% of the LG1 reads in 16 of the 78 transgenic lines. LG1 mutations resulted in a tuneable leaf angle phenotype that became more upright as co‐editing frequency increased. Three lines with loss of function frequencies of ~12%, ~53% and ~95% of lg1 were selected following a randomized greenhouse trial and grown in replicated, multi‐row field plots. The co‐edited LG1 mutations were stably maintained in vegetative progenies and the extent of co‐editing remained constant in field tested lines L26 and L35. Next generation sequencing confirmed the absence of potential off targets. The leaf inclination angle corresponded to light transmission into the canopy and tiller number. Line L35 displaying loss of function in ~12% of the lg1 NGS reads exhibited an 18% increase in dry biomass yield supported by a 56% decrease in leaf inclination angle, a 31% increase in tiller number, and a 25% increase in internode number. The scalable co‐editing of LG1 in highly polyploid sugarcane allows fine‐tuning of leaf inclination angle, enabling the selection of the ideotype for biomass yield.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Modeling Competing Line-broadening Mechanisms in Neutron Star Atmospheres: Interference between Motional Stark and Ion Broadening

Neutron star surfaces have extremely high magnetic fields. In the atmosphere, the broadening of spectral lines will be substantial from the dense plasma as well as from the magnetic field. One broadening mechanism of note is due to the motional Stark effect (MSE)—an additional electric field that arises from the motion of the atom in the magnetic field. However, approximate formulae are often used to construct atmosphere models, and the MSE is assumed to be the dominant line-broadening mechanism even in ions. Detailed pressure-broadening models in these extreme magnetic fields are now currently being developed. In these more detailed models, it was suggested that the MSE may not be as large as previously predicted. If correct, this hypothesis implies that neutron star line widths might be dominated by pressure broadening rather than by motional Stark broadening. We find that, in the absence of plasma perturbations, for typical magnetic fields (B = 10 12 G), mid-Z elements, such as oxygen, have motional Stark widths of order 1 eV for transitions between dipole-allowed transitions from the ground state, though higher temperatures and transitions to higher-energy states are expected to have more broadening. The MSE also breaks down selection rules, giving rise to forbidden transitions, which have much larger widths. When plasma perturbations are included, we find that the plasma perturbation and motional Stark processes are not independent and, as a result, the spectral lines become narrow in a nontrivial way and display harmonics of the ion cyclotron frequency.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2026

Viral Nuclease Inhibitors: Small molecule disruptors of the UL12 alkaline nuclease display broad anti-herpes virus activity

Herpes simplex virus 1 (HSV-1) UL12 encodes a highly conserved 5′ → 3′ alkaline exonuclease that is essential for the production of infectious virus. Together with the viral single-stranded DNA-binding/annealing protein ICP8, UL12 functions as a two-component recombinase that mediates recombination-dependent viral DNA replication. Here, we present the crystal structure of the catalytic domain of the HSV alkaline nuclease (UL12), which provides the first view of an α-herpesvirus alkaline nuclease. Using this structure, we optimized a series of small-molecule viral nuclease inhibitors (VNIs) that target the UL12 active site and potently inhibit UL12 exonuclease activity in vitro. We have thus established a robust platform for structure-based docking, SAR analysis and rational inhibitor design. Because UL12 orthologs are conserved across all human herpesviruses, we examined the activity of these compounds against the β- and γ-herpesvirus alkaline nucleases UL98 and SOX and found that they inhibit all three enzymes. The VNIs also exhibit antiviral activity against HSV-1 and HCMV in cell culture. EC 50 and IC 50 values were in the nanomolar to low micromolar range. Together, these findings establish herpesvirus alkaline nucleases as conserved, druggable antiviral targets and provide a foundation for the development of broad-spectrum anti-herpesvirus therapeutics, either as standalone agents or in combination with existing nucleoside analogs.

Sharma, Nidhi↗
DOE OSTI2025

From Structure to Function: Zn/Mn-Modified Maghemite as an Advanced Nanoplatform for Magnetic Hyperthermia and Radionuclide Therapy

The development of nanoplatforms capable of efficient heat generation and stable radionuclide delivery is essential for effective bimodal cancer therapy. Here, in this study, binary (Fe–M) and ternary (Fe–M–M′) metal oxide nanoparticles were synthesized via a polyol method optimized to produce flower-like γ-Fe 2 O 3 (maghemite) structures, with M and M′ representing Zn and/or Mn. Comprehensive structural and magnetic characterization was conducted to explain the relationship between composition, defect structure, and hyperthermic performance. The analyses revealed that cation substitution induced an Fe-site vacancy, primarily at octahedral positions, leading to local structural distortions, as confirmed by powder X-ray diffraction and pair distribution function analysis. The optimized composition, with Zn/Mn/Fe = 0.040:0.182:1, exhibited the highest concentration of vacancies and structural disorder. These vacancies altered the bonding environment, enhancing magnetic interactions at tetrahedral sites while weakening those at the octahedral positions. The resulting multicore nanoflowers (20–63 nm; core size 13–18 nm) displayed strong heating performance, with intrinsic loss power ranging from 0.34 to 5.77 nHm 2 kg –1 . The optimized sample achieved a temperature increase of 30 °C within 2 min and a specific absorption rate of 369 W g –1 . This composition was further coated with citrate (CA) and successfully radiolabeled with 177 Lu, achieving a radiolabeling yield of 92.7% and excellent stability, thus forming a robust nanoplatform for combined magnetic hyperthermia and radionuclide therapy. Biological evaluation of the optimized S5 composition revealed selective cytotoxicity toward HeLa and LS174 cells, while toxicity was significantly lower to A549, A375, and normal MRC-5 cells. Citrate coating of S5 nanoparticles (S5@CA) drastically reduced their cytotoxicity across all tested cell lines (IC 50 > 200 μg mL –1 ), confirming their enhanced biocompatibility for therapeutic applications. In HeLa cells subjected to magnetic hyperthermia, the viability decreased to approximately 84% after 30 min and 61% after 60 min of treatment, demonstrating the sustained hyperthermic effect at a controlled working temperature of 48 °C. These results underscore the effectiveness of cation substitution and vacancy engineering in tailoring the functional properties of maghemite-based nanomaterials for advanced multimodal cancer therapies.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Computational design of high-entropy rare earth aluminum garnets for advanced thermal and environmental barrier coatings

To enhance the protection of Ni-based superalloys in gas turbine engines’ high-temperature environments, it’s crucial to develop advanced thermal/environmental barrier coating (T/EBC) materials with a balanced combination of thermal and mechanical properties. This optimization is essential to safeguard against chemical and thermal challenges. Here, in this study, we harness the power of density functional theory (DFT) in conjunction with combinatorial chemistry methodologies to engineer high-performance high-entropy rare earth disilicates of the RE 3 Al 5 O 12 family (where RE denotes Y, Gd, Er, and Yb). These materials are meticulously designed to exhibit superior phase stability, a targeted coefficient of thermal expansion (CTE), low lattice thermal conductivity, and robust mechanical properties. The determination of CTE values is accomplished through phonon calculations at various volume settings within the quasi-harmonic approximation, while lattice thermal conductivities are rigorously assessed employing the Debye-Callaway model, accounting for three distinct phonon processes. Our findings highlight the remarkable attributes of the solid solution (Y 1/4 Gd 1/4 Er 1/4 Yb 1/4 ) 3 Al 5 O 12 , which displays a reduction in lattice thermal conductivity compared to its individual constituents while maintaining a favorable range of CTE values. The novel T/EBC material, distinguished by their multifaceted functionalities, are poised to use in substantial enhancements in the performance of engines.

36 MATERIALS SCIENCE↗