Search NASA⌕ Search

SEARCH · Search NASA

Results for “Distortion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
NASA NTRS2015

A Comparison of Three Methods for Measuring Distortion in Optical Windows

It's important that imagery seen through large-area windows, such as those used on space vehicles, not be substantially distorted. Many approaches are described in the literature for measuring the distortion of an optical window, but most suffer from either poor resolution or processing difficulties. In this paper a new definition of distortion is presented, allowing accurate measurement using an optical interferometer. This new definition is shown to be equivalent to the definitions provided by the military and the standards organizations. In order to determine the advantages and disadvantages of this new approach, the distortion of an acrylic window is measured using three different methods: image comparison, moiré interferometry, and phase-shifting interferometry.

Interferometry↗
NASA NTRS2018

Cyclic Symmetry Finite Element Forced Response Analysis of a Distortion-Tolerant Fan with Boundary Layer Ingestion

Accurate prediction of the blade vibration stress is required to determine overall durability of fan blade design under Boundary Layer Ingestion (BLI) distorted flow environments. Traditional single blade modeling technique is incapable of representing accurate modeling for the entire rotor blade system subject to complex dynamic loading behaviors and vibrations in distorted flow conditions. A particular objective of our work was to develop a high-fidelity full-rotor aeromechanics analysis capability for a system subjected to a distorted inlet flow by applying cyclic symmetry finite element modeling methodology. This reduction modeling method allows computationally very efficient analysis using a small periodic section of the full rotor blade system. Experimental testing by the use of the 8-foot by 6-foot Supersonic Wind Tunnel Test facility at NASA Glenn Research Center was also carried out for the system designated as the Boundary Layer Ingesting Inlet/Distortion-Tolerant Fan (BLI2DTF) technology development. The results obtained from the present numerical modeling technique were evaluated with those of the wind tunnel experimental test, toward establishing a computationally efficient aeromechanics analysis modeling tool facilitating for analyses of the full rotor blade systems subjected to a distorted inlet flow conditions. Fairly good correlations were achieved hence our computational modeling techniques were fully demonstrated. The analysis result showed that the safety margin requirement set in the BLI2DTF fan blade design provided a sufficient margin with respect to the operating speed range.

forced response analysis↗
DOE OSTI2025

Shaping dark photon spectral distortions

The cosmic microwave background (CMB) spectrum is an extraordinary tool for exploring physics beyond the Standard Model. The exquisite precision of its measurement makes it particularly sensitive to small effects caused by hidden sector interactions. In particular, CMB spectral distortions can unveil the existence of dark photons which are kinetically coupled to the standard photon. In this work, we use the COBE-FIRAS dataset to derive accurate and robust limits on photon-to-dark-photon oscillations for a large range of dark photon masses, from 10$^{−10}$ to 10$^{−4}$ eV. We consider in detail the redshift dependence of the bounds, computing CMB distortions due to photon injection/removal using a Green’s function method. Our treatment improves on previous results, which had set limits studying energy injection/removal into baryons rather than photon injection/removal, or ignoring the redshift evolution of distortions. The difference between our treatment and previous ones is particularly noticeable in the predicted spectral shape of the distortions, a smoking gun signature for photon-to-dark-photon oscillations. The characterization of the spectral shape is crucial for future CMB missions, which could improve the present sensitivity by orders of magnitude, exploring regions of the dark photon parameter space that are otherwise difficult to access [inline-graphic not available: see fulltext].

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2026

Reduction of baseplate distortion during directed energy deposition using compliant features

Distortion in additive manufacturing (AM) remains a barrier to its adoption in precision industries. Baseplate warpage is one such issue which compromises the feasibility of post-process precision machining. The restriction to thermal contraction of the deposited part, imposed by the baseplate, generates bending moments, that in turn causes warpage. A novel distortion mitigation strategy using baseplates with integrated compliant features, which enables thermal contraction of the build is presented. Six unique design concepts are evaluated, including a solid reference, using two deposition geometries. A laser, hot-wire, directed energy deposition (DED) process is used to deposit a symmetric cylindrical part (C-part) and a T-shaped asymmetric part (T-part). Flatness deviation of baseplates is measured using structured light 3D scanning. Measurements reveal a reduction in net flatness deviation of 58.8% for the C-part and 40.9% for the T-part, compared to the solid reference. While most designs yielded reductions exceeding 30% and 20% for the C- and T-parts, respectively, one configuration resulted in increased deviation. Finite element (FE) simulations are performed to elucidate the underlying mechanisms affecting distortion of compliant baseplates during DED. Despite variations between predictions and measurements, agreement in the general trend is observed. It also revealed that initial flatness errors in baseplates significantly affect its deviation during deposition. Predictions indicate that compliant features significantly affect the thermal distribution as well as the evolution of flatness deviation in the baseplate during deposition. Notably, one design exhibited a reduction in distortion during cooling, following its initial increase during deposition. FE predictions show a maximum reduction of 60.9% and 38.8% in net flatness deviation for the C- and T-parts, respectively. The performance of compliant baseplates is found to be governed by both its the thermal and mechanical characteristics, which are crucial factors to be considered during design.

Mathews, Ritin [ORNL] (ORCID:0000000301440828)↗
DOE OSTI2016

Expanded polyglutamine embedded in the endoplasmic reticulum causes membrane distortion and coincides with Bax insertion

The endoplasmic reticulum (ER) is important in various cellular functions, such as secretary and membrane protein biosynthesis, lipid synthesis, and calcium storage. ER stress, including membrane distortion, is associated with many diseases such as Huntington's disease. In particular, nuclear envelope distortion is related to neuronal cell death associated with polyglutamine. However, the mechanism by which polyglutamine causes ER membrane distortion remains unclear. We used electron microscopy, fluorescence protease protection assay, and alkaline treatment to analyze the localization of polyglutamine in cells. We characterized polyglutamine embedded in the ER membrane and noted an effect on morphology, including the dilation of ER luminal space and elongation of ER-mitochondria contact sites, in addition to the distortion of the nuclear envelope. The polyglutamine embedded in the ER membrane was observed at the same time as Bax insertion. These results demonstrated that the ER membrane may be a target of polyglutamine, which triggers cell death through Bax. -- Highlights: •We characterized polyglutamine embedded in the ER membrane. •The polyglutamine embedded in the ER membrane was observed at the same time as Bax insertion. •The ER membrane may be a target of polyglutamine, which triggers cell death.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2017

An improved prediction of residual stresses and distortion in additive manufacturing

In laser assisted additive manufacturing (AM) an accurate estimation of residual stresses and distortion is necessary to achieve dimensional accuracy and prevent premature fatigue failure, delamination and buckling of components. Since many process variables affect AM, experimental measurements of residual stresses and distortion are time consuming and expensive. Numerical thermo-mechanical models can be used for their estimation, but the quality of calculations depends critically on the accurate transient temperature field which affects both the residual stresses and distortion. Here in this study, a well-tested, three-dimensional, transient heat transfer and fluid flow model is used to accurately calculate transient temperature field for the residual stress and distortion modeling. The calculated residual stress distributions are compared with independent experimental results. It is shown that the residual stresses can be significantly minimized by reducing the layer thickness during AM. Inconel 718 components are found to be more susceptible to delamination than Ti-6Al-4V parts because they encounter higher residual stresses compared to their yield strength.

36 MATERIALS SCIENCE↗
DOE OSTI2014

Monoclinic distortion and magnetic coupling in the double perovskite Sr{sub 2−x}Ca{sub x}YRuO{sub 6}

Abstracts: This work investigates in the insulating double perovskites Sr{sub 2−x}Ca{sub x}YRuO{sub 6}. We address the angular dependence of the strength of the magnetic coupling due to the deviation from planarity of the basal layers of the monoclinic structure, characterized by the in-plane angle α<180°, in order to probe the impact of the structural distortions in the magnetic properties of the compounds. High resolution x-ray powder diffraction, susceptibility, and specific heat measurements were performed. The deviation from planarity significantly increases (α=144° for x=1) while the bond distances vary in a complex way as a consequence of the strong monoclinic distortion. We found that the magnetic transition temperature, T{sub M}, shows a linear dependence on cos [(π−α)/2]. This result is discussed in terms of t{sub 2g}(π)–e{sub g}(σ) mixing of the magnetic orbitals of the Ru{sup 5+} ions and unbalanced competitive super-exchange interactions. The deleterious effect of Ca doping for the magnetic coupling is confirmed by the reduction in the short-range antiferromagnetic correlations characteristic of the parent compound at T>>T{sub M} and the enhancement of magnetic frustration for T<T{sub M}. - Graphical abstract: Tilting of the oxygen octahedra in Sr{sub 2−x}Ca{sub x}YRuO{sub 6} due to strong monoclinic distortions. - Highlights: • Neel temperatures in SrCaYRuO were correlated quantitatively with lattice distortions. • Bending of Ru–O–Y planes plays a major role in the magnetic properties of SrCaYRuO. • The structural–magnetic correlation is due to π–σ mixing of the magnetic orbitals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Enhanced photocatalytic activity of Te-doped Bi{sub 2}MoO{sub 6} under visible light irradiation: Effective separation of photogenerated carriers resulted from inhomogeneous lattice distortion and improved electron capturing ability

Te-doped Bi{sub 2}MoO{sub 6} photocatalyst was hydrothermally synthesized, and nonmetal atoms Te were homogeneously incorporated into Bi{sub 2}MoO{sub 6} lattice with the substitution of Te{sup 4+} to Mo{sup 6+}. With increasing Te-doping concentration in Bi{sub 2}MoO{sub 6}, no detectable band-gap narrowing but more and more severe inhomogeneous lattice distortions were determined. The activity of Bi{sub 2}MoO{sub 6} photocatalyst was evaluated through methylene blue degradation under visible light irradiation (λ>410 nm) and was greatly enhanced by Te-doping. When Te-doped Bi{sub 2}MoO{sub 6} was synthesized at Te/Mo molar ratio of 7.5%, a maximum first-order rate constant of methylene blue degradation was obtained. The inhomogeneous lattice distortion generated an internal dipole moment, and the holes generated with the substitution of Te{sup 4+} to Mo{sup 6+} acted as the capturing centers of photogenerated electrons, thus the effective separation of photogenerated carriers was facilitated to result in a relatively high concentration of holes on the surface of Te-doped Bi{sub 2}MoO{sub 6} to be favorable for the efficient methylene blue degradation. - Graphical abstract: With the substitution of Te{sup 4+} to Mo{sup 6+}, effective separation of photogenerated carriers resulted from inhomogeneous lattice distortion and improved electron capturing ability is achieved to be responsible for enhanced photocatalytic activity of Te-doped Bi{sub 2}MoO{sub 6}. - Highlights: • Nonmetal Te is incorporated into Bi{sub 2}MoO{sub 6} with the substitution of Te{sup 4+} to Mo{sup 6+}. • Revealing inhomogeneous lattice distortion and improved electron capturing ability. • Effective separation of photogenerated carriers in Te-doped Bi{sub 2}MoO{sub 6} is achieved. • The mechanism of methylene blue degradation over Te-doped Bi{sub 2}MoO{sub 6} is proposed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2014

A method to correct coordinate distortion in EBSD maps

Drift during electron backscatter diffraction mapping leads to coordinate distortions in resulting orientation maps, which affects, in some cases significantly, the accuracy of analysis. A method, thin plate spline, is introduced and tested to correct such coordinate distortions in the maps after the electron backscatter diffraction measurements. The accuracy of the correction as well as theoretical and practical aspects of using the thin plate spline method is discussed in detail. By comparing with other correction methods, it is shown that the thin plate spline method is most efficient to correct different local distortions in the electron backscatter diffraction maps. - Highlights: • A new method is suggested to correct nonlinear spatial distortion in EBSD maps. • The method corrects EBSD maps more precisely than presently available methods. • Errors less than 1–2 pixels are typically obtained. • Direct quantitative analysis of dynamic data are available after this correction.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Concurrent Pressure-Induced Spin-State Transitions and Jahn–Teller Distortions in MnTe

Cooperative Jahn-Teller (JT) distrotion accompanied by electromagnetic-lattice coupling plays a crucial role in numerous important phenomena in materials science. The JT distortion occurring in high-spin 3d 4 and 3d 9 configurations in octahedral complexes is common, but similarly large distortion due to lifting the degeneracy of t 2g orbits has so far seldomly observed. Here we report the discovery of pressure-induced cooperative JT effect coupled with a large volume-collapse of ~12.8% and a magnetic moment collapse from S = 5/2 to S = 1/2 at ~20.9 GPa in MnTe. The first-principles calculation indicates that weakened p-d hybridization and enhanced d states localization result in lifting t 2g orbital degeneracy in Mn 2+ (d 5 ) which induced a cooperative JT effect-triggered electromagnetic-lattice coupling. Furthermore, these findings suggest a new mechanism for the cooperative JT distortion via pressure induced ligand distortion in antiferromagnetic materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Effect of Local Structural Distortions on Antiferroelectric–Ferroelectric Phase Transition in Dilute Solid Solutions of K x Na 1– x NbO 3

The fundamental principles that govern antiferroelectric (AFE)–ferroelectric (FE) transitions are not well understood for many solid solutions of perovskite compounds. For example, crystal chemical considerations based on the average Goldschmidt tolerance factor or ionic polarizability do not precisely predict the boundary between the AFE and FE phases in dilute solid solutions of alkali niobates, such as K x Na 1– x NbO 3 ( x ≤ 0.02). Here, based on detailed structural analysis from neutron total scattering experiments, we provide insights about how the relative local distortions around the A- and B-sites of the ABO 3 perovskite structure affect the AFE/FE order of the average crystallographic phases in K x Na 1– x NbO 3 . Specifically, we show that a higher (lower) ratio of B-site-centered distortions over A-site-centered distortions drives transition toward a long-range FE (AFE) phase, which is based on a competition between the long-range polarizing field of the Nb–O dipoles and the disordering effect of local distortions around the A-site. Our study provides a predictive tool for designing complex solid-solution perovskites with tunable (anti)ferroelectric polarization properties, which can be of interest for various energy-related applications such as high-density energy storage and solid-state cooling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Raman Study of the Structural Distortion in the Ni 1–x Co x TiO 3 Solid Solution

In this paper, Raman spectra were collected on Ni 1–x Co x TiO 3 (0 ≤ x ≤ 1) ilmenite samples as a function of the temperature between 4 and 1200 K. An evident symmetry lowering from the prototype R$\bar{3}$symmetry is observed. The distortion was largest for the x = 0.40 and 0.50 samples and significantly diminished for small and large values of x. The distortion was preserved in the whole temperature range and, except for the x = 0.50 sample, did not show significant changes. Notably, between 25 and 69 K, distortion of the x = 0.40 sample is accompanied by ferromagnetic order. The direct cation–cation and O-mediated indirect interactions are discussed as mechanisms behind the distortion and magnetic order. A reversible order–disorder phase transformation, assigned to occur between the ilmenite and corundum phases, took place at 973 K in the x = 0.50 sample. Completion of the transformation took over 1 h. Finally, the role of the overlap of Co/Ni and Ti 3d orbitals through O octahedral faces for charge transfer is discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Pseudo–Jahn–Teller Distortion in a One-Dimensional π-Conjugated Polymer

Structural distortions in low-dimensional π-conjugated systems profoundly influence their electronic properties, but the control of such behavior in laterally extended systems remains challenging. Here, in this study, we demonstrate that a one-dimensional conjugated polymer─ poly -(difluorenoheptalene-ethynylene) (PDFHE)─undergoes a pronounced out-of-plane backbone distortion, equivalent to a spontaneous symmetry breaking (SSB) of its mirror symmetry. We synthesized PDFHE on noble metal surfaces and characterized its structure and electronic states using low-temperature scanning tunneling microscopy (STM). Rather than adopting a planar, high-symmetry conformation, PDFHE relaxes into nonplanar isomers stabilized by a pseudo–Jahn–Teller (PJT) distortion having mirror-odd out-of-plane character. The distortion lowers the total energy and increases the band gap, providing a concise rationale for the observed symmetry breaking. Density functional theory calculations corroborate these findings, providing a microscopic explanation for the SSB. Our results show that even in mechanically robust extended π-systems, subtle electron–lattice coupling can spontaneously drive significant structural rearrangements, even in mechanically robust extended π-systems.

conformation↗
DOE OSTI2020

Megahertz-rate shock-wave distortion cancellation via phase conjugate digital in-line holography

Abstract Holography is a powerful tool for three-dimensional imaging. However, in explosive, supersonic, hypersonic, cavitating, or ionizing environments, shock-waves and density gradients impart phase distortions that obscure objects in the field-of-view. Capturing time-resolved information in these environments also requires ultra-high-speed acquisition. To reduce phase distortions and increase imaging rates, we introduce an ultra-high-speed phase conjugate digital in-line holography (PCDIH) technique. In this concept, a coherent beam passes through the shock-wave distortion, reflects off a phase conjugate mirror, and propagates back through the shock-wave, thereby minimizing imaging distortions from phase delays. By implementing the method using a pulse-burst laser setup at up to 5 million-frames-per-second, time-resolved holograms of ultra-fast events are now possible. This technique is applied for holographic imaging through laser-spark plasma-generated shock-waves and to enable three-dimensional tracking of explosively generated hypersonic fragments. Simulations further advance our understanding of physical processes and experiments demonstrate ultra-high-speed PCDIH techniques for capturing dynamics.

Science & Technology - Other Topics↗
DOE OSTI2025

Local structural distortions drive magnetic molecular field in compositionally complex spinel oxide

Understanding how local distortions determine the functional properties of high entropy materials, containing five or more elements at the same crystallographic site, is an open challenge. We address this for a compositionally complex spinel oxide (Mn 0.2 Co 0.2 Ni 0.2 Cu 0.2 Zn 0.2 )Cr 2 O 4 (A 5 Cr 2 O 4 ). By comparatively examining extended X-ray absorption fine structure on A 5 Cr 2 O 4 and its parent counterparts, ACr 2 O 4 , along with density functional theory calculations for multiple configurations, we find that the element-specific distortions go beyond the first neighbor. Specifically, the strong Jahn-Teller distortion present in CuCr 2 O 4 is found to be completely suppressed in A 5 Cr 2 O 4 even locally. Instead, there is a broad distribution of Cu-O and Cu-Cr bond distances, while other A-O distances acquire certain specific values. This study demonstrates the additional flexibility of a cationic sublattice in maintaining a uniform long-range structure, in contrast to previous reports showing only the accommodative anionic sublattice. The mean-field magnetic interactions of A 5 Cr 2 O 4 exhibit a striking resemblance to those of NiCr 2 O 4 , despite the presence of multiple magnetic ions and variable bond lengths. This originates from the comparability of bond lengths around Cr in both materials. Our study paves the way for a deeper understanding of the impact of local structural distortions on the physical properties of compositionally complex quantum materials.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Short- vs . long-range elastic distortion: structural dynamics of a [2 × 2] tetrairon( II ) spin crossover grid complex observed by time-resolved X-Ray crystallography

Spin crossover complexes (SCO) are among the most studied molecular switches due to their potential use in displays, sensors, actuators and memory components. A prerequisite to using these materials is the understanding of the structural changes following the spin transition at out-of-equilibrium conditions. So far, out-of-equilibrium studies in SCO solids have been focused on mononuclear complexes, though a growing number of oligonuclear SCO complexes showing cooperative effects are being reported. Here, we use time-resolved pink Laue crystallography to study the out-of-equilibrium dynamics of a [2 × 2] tetranuclear metallogrid of the form [Fe II 4 L Me 4 ](BF 4 ) 4 ·2MeCN ([L Me ] - = 4-methyl-3,5-bis{6-(2,2'-bipyridyl)}pyrazolate). The out-of-equilibrium spin state switching induced by a ps laser pulse demonstrates that the metallogrid exhibits a multi-step response similar to that reported for mononuclear complexes. Contrary to the mononuclear complexes, the metallogrid shows two types of elastic distortions at different time scales. The first is a short-range distortion that propagates over the entire Fe 4 grid complex during the ps time scale, and it is caused by the rearrangement of the coordination sphere of the photo-switching ion and the constant feedback between strongly linked metal ions. The second is a long-range distortion caused by the anisotropic expansion of the lattice during the ns time scale, observed in mononuclear materials. The structural analysis demonstrates that the long-range prevails over the short-range distortion, inducing the largest deformation of both the entire grid and the coordination sphere of each metal ion. The present study sheds light on the out-of -equilibrium dynamics of a non-cooperative oligonuclear complex.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Interplay between element-specific distortions and electrocatalytic oxygen evolution for cobalt–iron hydroxides

A microscopic understanding of how Fe-doping of Co(OH) 2 improves electrocatalytic oxygen evolution remains elusive. We study two Co 1–x Fex(OH) 2 series that differ in fabrication protocol and find composition alone poorly correlates to catalyst performance. Structural descriptors extracted using X-ray diffraction, X-ray absorption spectroscopy, and Raman spectroscopy reveal element-specific distortions in Co 1–x Fe x (OH) 2 . These structural descriptors are composition-dependent within individual sample series but inconsistent across fabrication protocols, revealing fabrication-dependence in catalyst microstructure. Correlations between structural parameters from different techniques show that Fe–O resists bond length changes, forcing distortion of Co environments. We find the difference in O–M–O bond angles between Co and Fe sites to correlate with electrocatalytic behavior across both sample series, which we attribute to asymmetric distortion of potential energy surfaces for the Co(III) to Co(IV) oxidation. A Tafel slope consistent with a rate-limiting step without electron transfer emerges as the O–Co–O angle decreases, implying a distortion-induced transition in the rate-limiting step. The fabrication dependence of electronic and bonding structure in the catalysts should be considered in theoretical and high-throughput analyses of electrocatalyst materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Vibronic interactions proceeding from combined analytical and numerical considerations: Covalent functionalization of graphene by benzene, distortions, electronic transitions

Chemically bound states of benzene molecules with graphene are studied both analytically and numerically. The states are formed by switching off intrabonds of π-electrons in C{sub 6} rings to interbonds. A number of different undistorted and distorted structures are established both with aligned and with transversal mutual orientation of benzene and graphene. The vibronic interactions causing distortions of bound states are found, by using a combination of analytical and numerical considerations. This allows one to determine all electronic transitions of π-electrons without explicit numerical calculations of excited states, to find the conical intersections of potentials, and to show that the mechanism of distortions is the pseudo-Jahn-Teller effect. It is found that the aligned distorted benzene molecule placed between two graphene sheets makes a chemical bond with both of them, which may be used for fastening of graphene sheets together.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗