Search NASA⌕ Search

SEARCH · Search NASA

Results for “Distribution Coefficient”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

Passive particle dosimetry

Present methods of dosimetry are reviewed with emphasis on the processes using silver chloride crystals for ionizing particle dosimetry. Differences between the ability of various crystals to record ionizing particle paths are directly related to impurities in the range of a few ppm (parts per million). To understand the roles of these impurities in the process, a method for consistent production of high purity silver chloride, and silver bromide was developed which yields silver halides with detectable impurity content less than 1 ppm. This high purity silver chloride was used in growing crystals with controlled doping. Crystals were grown by both the Czochalski method and the Bridgman method, and the Bridgman grown crystals were used for the experiments discussed. The distribution coefficients of ten divalent cations were determined for the Bridgman crystals. The best dosimeters were made with silver chloride crystals containing 5 to 10 ppm of lead; other impurities tested did not produce proper dosimeters.

Childs, C. B.↗
NASA NTRS1978

Tungsten in iron meteorites

Tungsten concentrations have been determined by instrumental neutron activation in 104 iron meteorites, and range from 0.07 to 5 microg/g. In individual groups, concentrations vary by factors of between 1.5 and 8, but there are negative W-Ni correlations in 8 groups: IAB, IC, IIAB, IID, IIE, IIIAB, IIICD, and IIIF. The lowest W concentrations are found in groups IAB and IIICD, which also have the smallest slopes on a W-Ni plot. Eighteen anomalous irons have W concentrations between 5 microg/g (Butler) and 0.11 microg/g (Rafrueti). The distribution of W in irons shows similarities to that of other refractory sideophilic elements (except Mo), but is closest to the distribution of Ru and Pt. Assuming that chemical trends in group IIIAB were produced by fractional crystallization, a value of 1.6 can be deduced for the distribution coefficient of W between solid and liquid metal, as compared with 0.89 for Mo. Experimental evidence in support of these values is tenuous.

Scott, E. R. D.↗
NASA NTRS1977

KREEP petrogenesis revisited

An experimentally determined crystallization sequence for a composition similar to the LKFM breccias and experimentally determined crystal/liquid distribution coefficients are used to calculate the evolution of the abundances of several key elements during the crystallization of LKFM liquids. Results indicate that the LKFM breccias are not themselves precursors to Apollo 15 igneous KREEP, but that compositions slightly poorer in Ti and Fe might be. Consideration of the evolution of Ti and Sm abundances during the differentiation of proposed whole-moon compositions suggests that it may be necessary to appeal to 'unorthodox' mechanisms such as magma hybridization or interaction of magma with genetically unrelated minerals within the lunar crust to produce KREEP-rich liquids having the observed Ti/Sm. It is concluded that the compositions of samples with Sm contents greater than those in LKFM are dominated by igneous processes, while samples with lower Sm contents may be mixtures of an anorthositic component, a Mg-rich Sm-poor component, and a component similar in composition to LKFM.

Mckay, G. A.↗
NASA NTRS1980

Fuselage ventilation due to wind flow about a postcrash aircraft

Postcrash aircraft fuselage fire development, dependent on the internal and external fluid dynamics is discussed. The natural ventilation rate, a major factor in the internal flow patterns and fire development is reviewed. The flow about the fuselage as affected by the wind and external fire is studied. An analysis was performend which estimated the rates of ventilation produced by the wind for a limited idealized environmental configuration. The simulation utilizes the empirical pressure coefficient distribution of an infinite circular cylinder near a wall with its boundary later flow to represent the atmospheric boundary layer. The resulting maximum ventilation rate for two door size openings, with varying circumferential location in a common 10 mph wind was an order of magnitude greater than the forced ventilation specified in full scale fire testing. The parameter discussed are: (1) fuselage size and shape, (2) fuselage orientation and proximity to the ground, (3) fuselage-openings size and location, (4) wind speed and direction, and (5) induced flow of the external fire plume is recommended. The fire testing should be conducted to a maximum ventilation rate at least an order of magnitude greater than the inflight air conditioning rates.

Stuart, J. W.↗
NASA NTRS1980

An implicit algorithm for the transonic full-potential equation in conservative form

A fast, implicit approximate factorization algorithm for the solution of the conservative full-potential equation for transonic flow in two and three dimensions is presented. Stability in supersonic regions is maintained by the use of an upwind evaluation of the density coefficient along all coordinate directions, providing an effective upwind difference of the streamwise terms for any orientation of the velocity vector and thereby enhancing the reliability of the algorithm. The algorithm is shown to provide rapid convergence for the computation of certain difficult two-dimensional test cases, including cases with fishtail shock patterns, demonstrating the reliability and efficiency of the procedure. Surface pressure coefficient distributions obtained by the present method are also found to be in good agreement with those computed by successive-line overrelaxation and a hybrid direct-solver/successive-line overrelaxation scheme, with significant reductions in CPU time required. A three-dimensional solution for a swept wing mounted between parallel walls is also presented which demonstrates the high convergence rate of the algorithm in three dimensions as well as two.

Holst, T.↗
NASA NTRS1982

Noble gas trapping by laboratory carbon condensates

Trapping of noble gases by carbon-rich matter was investigated by synthesizing carbon condensates in a noble gas atmosphere. Laser evaporation of a solid carbon target yielded submicron grains which proved to be efficient noble gas trappers (Xe distribution coefficients up to 13 cu cm STP/g-atm). The carbon condensates are better noble gas trappers than previously reported synthetic samples, except one, but coefficients inferred for meteoritic acid-residues are still orders of magnitude higher. The trapped noble gases are loosely bound and elementally strongly fractionated, but isotopic fractionations were not detected. Although this experiment does not simulate nebular conditions, the results support the evidence that carbon-rich phases in meteorites may be carriers of noble gases from early solar system reservoirs. The trapped elemental noble gas fractionations are remarkably similar to both those inferred for meteorites and those of planetary atmospheres for earth, Mars and Venus.

Niemeyer, S.↗
NASA NTRS1982

Sorption of noble gases by solids, with reference to meteorites. II - Chromite and carbon. III - Sulfides, spinels, and other substances; on the origin of planetary gases

The trapping of noble gases by chromite and carbon, two putative carriers of primordial noble gases in meteorites, was studied by synthesizing 19 samples in a Ne-Ar-Kr-Xe atmosphere at 440-720 K. Noble gas contents are found to approximately obey Henry's Law, but only slight correlations are found with composition, surface area, or adsorption temperature. Geometric mean distribution coefficients for bulk samples and HCl residues in 10 cu cm STP/g atm are: Xe 100, Kr 15, Ar 3.5, and Ne 0.62. Elemental fractionation data support the suggestion of Lewis et al. (1977) that chromite and carbon in C2 and C3 chondrites were formed by the reaction: Fe, Cr + 4CO yields (Fe, Cr)3O4 + 4C + carbides. In contrast to meteoritic minerals, the synthetic specimens show no isotopic fractionation of noble gases. In a subsequent study, attention is given to the cases of sulfides and spinels, on the way to consideration of the origin of planetary gases. Sulfides showed three distinctive trends relative to chromite or magnetite. The elemental fractionation pattern of Ar, Kr and Xe in meteorites, terrestrial rocks and planets resembles the adsorption patterns on the carbons, spinels, sulfides, and other solids studied. The high release temperature of meteoritic noble gases may be explained by transformation of the physisorbed or chemisorbed gas. The ready loss of meteoritic heavy gases on surficial oxidation is consistent with adsorption, as is the high abundance.

Yang, J.↗
NASA NTRS1983

Kinetic effects on trace element partitioning

A potential difficulty regarding the application of trace element abundance data to problems in igneous petrogenesis is related to the possibility that partitioning of trace elements among minerals and melt may not be an equilibrium process. It may rather be controlled by kinetic processes, specifically the interplay between crystal growth and diffusion of the trace elements in crystals and melt. The present investigation has the objective to quantify kinetic effects on trace element partitioning. Crystals of olivine, pyroxene, and plagioclase were grown rapidly from synthetic melts resembling naturally-occurring mafic melts and doped with La, Sm, and Lu to quantify the magnitude of the effect of crystal growth rate on concentration of excluded trace elements. Olivine melt partitioning failed to show any appreciable kinetic effects, while diopside/melt distribution coefficients increased by 70 percent when the crystals grew very rapidly.

Lindstrom, D. J.↗
NASA NTRS1982

Finite element analysis of the effect of a non-planar solid-liquid interface on the lateral solute segregation during unidirectional solidification

The effect of solid-liquid interface shape on lateral solute segregation during steady-state unidirectional solidification of a binary mixture is calculated under the assumption of no convection in the liquid. A finite element technique is employed to compute the concentration field in the liquid and the lateral segregation in the solid with a curved boundary between the liquid and solid phases. The computational model is constructed assuming knowledge of the solid-liquid interface shape; no attempt is made to relate this shape to the thermal field. The influence of interface curvature on the lateral compositional variation is investigated over a range of system parameters including diffusivity, growth speed, distribution coefficient, and geometric factors of the system. In the limiting case of a slightly nonplanar interface, numerical results from the finite element technique are in good agreement with the analytical solutions of Coriell and Sekerka obtained by using linear theory. For the general case of highly non-planar interface shapes, the linear theory fails and the concentration field in the liquid as well as the lateral solute segregation in the solid can be calculated by using the finite element method.

Carlson, F. M.↗
NASA NTRS1984

Nonequilibrium Crystal Growth During Laser Annealing of Silicon

The Systematic studies of dopant (Group III, IV, or V) incorporation into silicon as a result of pulsed-laser annealing are reviewed. At low concentrations, dopant profiles measured after laser annealing can be compared to model calculations for redistribution by liquid-phase diffusion in order to determine the interfacial distribution coefficient K('). At high concentrations there is a limit (C sub s) to dopant incorporation into substitutional lattice sites. The mechanisms which limit dopant incorporation are discussed as well as the dependence of K(') and (max) on crystal orientation. Finally, measurements of interface temperatures, temperature profiles, and thermal gradients during rapid solidification are summarized.

White, C. W.↗
NASA NTRS1983

On the identification of continuous vibrating systems modelled by hyperbolic partial differential equations

This paper deals with the identification of spatially varying parameters in systems of finite spatial extent which can be described by second order hyperbolic differential equations. Two questions have been addressed. The first deals with 'partial identification' and inquires into the possibility of retrieving all the eigenvalues of the system from response data obtained at one location x-asterisk epsilon (0, 1). The second deals with the identification of the distributed coefficients rho(x), a(x) and b(x). Sufficient conditions for unique identification of all the eigenvalues of the system are obtained, and conditions under which the coefficients can be uniquely identified using suitable response data obtained at one point in the spatial domain are determined. Application of the results and their usefulness is demonstrated in the identification of the properties of tall building structural systems subjected to dynamic load environments.

Udwadia, F. E.↗
NASA NTRS1984

Heat transfer and pressure drop in blade cooling channels with turbulence promoters

Repeated rib roughness elements have been used in advanced turbine cooling designs to enhance the internal heat transfer. Often the ribs are perpendicular to the main flow direction so that they have an angle-of-attack of 90 deg. The objective of the project was to investigate the effect of rib angle-of-attack on the pressure drop and the average heat transfer coefficients in a square duct with two opposite rib-roughned walls for Reynolds number varied from 8000 to 80,000. The rib height-to-equivalent diameter ratio (e/D) was kept at a constant value of 0.063, the rib pitch-to-height ratio (P/e) was varied from 10 to 20, and the rib angle-of-attack (alpha) was varied from 90 deg to 60 deg to 45 deg to 30 deg respectively. Two types of entrance conditions were examined, namely, long duct and sudden contraction. The heat transfer coefficient distribution on the smooth side wall and the rough side wall at the entrance and the fully developed regions were measured. Thermal performance comparison indicated that the pumping power requirement for the rib with an oblique angle to the flow (alpha = 45 deg to 30 deg) was about 20 to 50 percent lower than the rib with a 90 deg angle to the flow for a given heat transfer duty.

Han, J. C.↗
NASA NTRS1984

Ge abundances in the lunar mantle and implications for the origin of the Moon

Regardless of the origin of the Moon, metal segregation must have occurred within the moon in order to account for its low siderophile element abundances relative to the Earth or chondrites. Germanium is a strongly siderophile element whose bulk distribution coefficient indicates that it is not fractionated during igneous processes on the Moon. The variability in absolute Ge abundances in mare basalts and pristine highland rocks, rather than elemental ratios, can be used to infer lunar mantle abundances and processes. Literature data have been compiled for Ge abundances in mare basalts and pristine highland rocks. For some landing sites, samples with 12 ppb Ge were considered to be extreme outliers and are not included. The Apollo 15 samples are enriched in Ge by a factor of 2.5 over the Apollo 12, 16 and 17 samples. Other siderophile element variations have been found in the Moon. Based on this data, best estimate of the average Ge abundance in the silicate portion of the Moon is 3.52 ppb. The Moon is depleted, relative to chondritic abundances, by a factor of 38,000 normalized to Si. Two possible explanations for the observed variations in Ge abundance in the Moon are: (1) more metal may have segregated from some regions of the Moon than from others; or Ge-bearing material may been been added later in the evolution of the Moon.

Dickinson, T.↗
NASA NTRS1984

Is phosphorus predictably incompatible in igneous processes?

Siderophile element abundances are central to recent models for core formation in the Earth and Moon and the origin of the Moon. It is important to identify siderophile elements whose behavior in igneous processes is predictable, so that primary mantle abundances can be deduced by subtracting out the effects of igneous processes. Newsom's model for core formation in the Moon requires subchondritic P, and suggests that P was depleted due to volatility. Experiments were conducted to determine P olivine/liquid distribution coefficients. Preliminary results indicate that P can be compatible with olivine during rapid cooling, but is not during isothermal crystallization with long growth times, and tends to be expelled during annealing. It is therefore not likely that P is compatible under any widespread igneous conditions, and the incompatible behavior of P in lunar crustal rocks can be safety assumed. In addition, low fO2 is insufficient to cause P compatibility, so it is unlikely that P-rich silicates formed during the early evolution of the Earth or Moon. These results indicate that P is depleted in the Moon.

Goodrich, C. A.↗
NASA NTRS1984

Trapping of xenon in ice - Implications for the origin of the earth's noble gases

Although the earth's atmosphere contains Ne, Ar, and Kr in about C1,2-chondrite proportions, Xe is depleted about 20-fold. To test the suggestion that the 'missing' Xe is trapped in Antarctic ice, distribution coefficients for Xe in artifically formed frost at -20 to -60 C were measured, using Xe-127 tracer. The values are 0.098 + or - 0.004 cc STP/g atm for trapping and less than 5 cc STP/g atm for trapping plus adsorption. If these results are representative of natural ice, then the Antarctic ice cap contains less than 1 percent of the atmospheric Xe inventory, or not greater than about 0.001 the amount needed for a C1,2-chondrite pattern. Two possibilities remain for the 'missing' Xe, both on the premise that the earth's noble gases, along with other volatiles, came from chondritic material: (1) xenon is preferentially retained in the mantle and lower crust, due to the strong affinity of Xe for clean silicate surfaces and amorphous carbon; and (2) the source material of the earth's volatiles had high, relatively unfractionated, Ar/Xe and Kr/Xe ratios, like the non-carbonaceous noble gas carriers in C3O and E-chondrites.

Wacker, J. F.↗
NASA NTRS1985

The parental magma for some rocks from the Norite 1 subzone of the Stillwater Complex - A lunar analog study

Single samples from three successive homogeneous but contrasting layers (anorthosite, anorthositic norite, and norite) in the Stillwater Complex Norite 1 subzone were subjected to detailed petrographic and major and trace element chemical analyses. The petrography and the element chemistry of the three layers are found to be generally consistent with formation from a common magma, although a simple model of liquidus phases and trapped magma is not quite consistent with petrography and chemistry. Changes of oxidation level from layer to layer are indicated by both iron in plagioclase and by the distribution coefficient for Eu required for compatibility with a common parent. Such oxidation changes can explain qualitatively the Mg/Fe variation otherwise attributed to trapped liquid. The data demonstrate that for individual lunar highlands igneous rocks, a general picture of the parent magma can be derived, but detailed petrochemical comparisons using a simple trapped liquid model might deny a common parentage for two samples when such in fact existed.

Ryder, G.↗
NASA NTRS1985

Heat Flow and Segregation in Directional Solidification

This research is composed of three major components: (1) development of interface morphology control for automated Bridgman growth of semiconductor systems; (2) comparative analysis of segregation during crystal growth in a reduced gravity environment and in the presence of magnetic fields; and (3) consequences of seeding by meltback in Bridgman growth under reduced gravity conditions. In attempts to optimize furnace design for crystal growth in a reduced gravity environment, an analytical approach to heat transfer was developed. It was thus found that charge confining crucibles diminish the ability to control the growth interface morphology through its position within the gradient zone. A heat pipe hot zone system for Bridgman growth, in reduced gravity environment, of crystal with diameters up to 16 mm was developed. For growth of Ga-doped germanium in the multipurpose (ASTP) furnace, it was found that the application of transverse magnetic fields (up to 36 kg) does not substantially increase the effective distribution coefficient; i.e., diffusion-controlled segregation observed in reduced gravity environment cannot be reached nor approached by magnetic field induced melt stabilization.

Witt, A. F.↗
NASA NTRS1986

Implicit, vectorizable schemes for the flux-difference split, three-dimensional Navier-Stokes equations

Two hybrid upwind models are defined for solving the Euler equations. The algorithms both employ approximate factorization (AF) in crossplane and symmetric block Gauss-Seidel relaxation in the third direction. One approach adds an additional factorization step to lower the number of required grid point operations for inversion of the block tridiagonal matrices; however, the move permits only one third of the operations to be vectorized. Finite difference solutions are calculated on a C-H-type grid, in this case enveloping a slender, sharp-edged delta wing. Sample data are provided for the calculated vortex flow for Re of 10,000, at a 20.5 deg angle of attack, represented in a crossflow velocity vector plot and in a spanwise pressure coefficient distribution. The AF scheme, without additional factorization, when used with a grid covering 51 x 51 x 72 points provides a convergent solution with no time step lasting longer than 0.00001 sec.

Liu, C. H.↗