Search NASA⌕ Search

SEARCH · Search NASA

Results for “Ellipsometry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Monitoring Volumetric Changes in Silicon Thin-Film Anodes through In Situ Optical Diffraction Microscopy

A high-resolution in situ spectroelectrochemical optical diffraction experiment has been created to understand the volume expansion/contraction process of amorphous silicon (a-Si) thin-film anodes. Electrodes consisting of 1D transmissive gratings of silicon have been produced through photolithographic methods. After glovebox assembly in a home-built Teflon cell, monitoring of the diffraction efficiency of these gratings during the lithiation/delithiation process is performed using an optical microscope equipped with a Bertrand lens. When the diffraction efficiency along with optical constants obtained from in situ spectroscopic ellipsometry is utilized, volume changes of the active materials can be deduced. Unlike transmission electron microscopy and atomic force microscopy characterization methods of observing silicon’s volume expansion, this experiment allows for real-time monitoring of the volume change at charge/discharge cycles greater than just the first few along with an experimental environment that directly mimics that of a real battery. This technique reflects promising results that provide needed insight into understanding the lithium alloying reaction and subsequent induced capacity fade during the cycling of alloying anodes in lithium-ion batteries.

25 ENERGY STORAGE↗

Plasma-Enhanced Atomic Layer Deposition of TiAlN: Compositional and Optoelectronic Tunability

Titanium nitride (TiN) is a unique refractory plasmonic material, the nanocomposites and alloys of which provide further opportunities to tailor its optical and photonic properties. We prepare TiAlN films of continuously variable compositions through the systematic variation of TiN versus AlN cycle ratio in plasma-enhanced atomic layer deposition (PEALD) and investigate the resulting thin-film composition, crystallinity, and optical properties. The resulting properties of TiAIN films are not simple linear combinations of the TiN and AlN films, which exhibit distinct metallic and dielectric properties, but instead are dramatically influenced by the local chemical environment of neighboring constituents. In situ spectroscopic ellipsometry further enables measurement of the varying optical properties of TiAlN films, which evolve over 10 s of nm of film thickness. The tunable optoelectronic properties of TiAlN films enable durable coatings of variable electrical resistance as well as high-temperature diffusion barriers and optical coatings with application to selective solar absorbers and emitters.

36 MATERIALS SCIENCE↗

Methods for Determining the Infrared Complex Refractive Indices n (λ) and k (λ) from Organic Solid Powders: Comparison of a Sucrose Single Crystal and a Pressed Pellet

There exists a need to measure optical constants n and k for many materials, especially organic solids in the infrared spectral region, but at present, there are only two established methods for making such measurements: single-angle (SA) reflectance and infrared spectroscopic ellipsometry (IRSE). The former derives the n/k vectors via measurement of the change in the amplitude of light reflected from the sample and then uses the Kramers–Kronig transform, while the latter measures the change in polarization of the reflected light from the sample to derive n/k. Here we make a direct comparison between the n/k vectors derived from SA measurements of a sucrose single crystal and the n/k values obtained after the crystal had been crushed, ground to powder, and pressed into a pellet form. The pellet was measured not only by SA but also via the IRSE method, and we found that pressing specular-quality pellets was critical, especially for the SA data. The n/k values of this typical organic molecule all agree to within 0.04 root-mean-square error, confirming that a pressed pellet can be used instead of a crystal to derive the intrinsic n/k vectors. In conclusion, this result is important for the many organic materials that, unlike sugar, do not have centimeter-sized crystals readily available.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Combined Spatially Resolved Characterization of Antireflection and Antisoiling Coatings for PV Module Glass

Characterization of photovoltaic (PV) module materials throughout different stages of service life is crucial to understanding and improving the durability of these materials. Currently the large-scale of PV modules (>1 m 2 ) is imbalanced with the small-scale of most materials characterization tools (= 1 cm 2 ). Furthermore, understanding degradation mechanisms often requires a combination of multiple characterization techniques. Here, we present adaptations of three standard materials characterization techniques to enable mapping characterization over moderate sample areas (=25 cm 2 ). Contact angle, ellipsometry, and UV-Vis spectroscopy are each adapted and demonstrated on two representative samples: a commercial multi-functional coating for PV glass and an oxide combinatorial sample library. Best practices are discussed for adapting characterization techniques for large area mapping and combining mapping information from multiple techniques.

14 SOLAR ENERGY↗

Tunable Collective Excitations in Epitaxial Perovskite Nickelates

The formation of plasmons through the collective excitation of charge density has generated intense discussions, offering insights to fundamental sciences and potential applications. While the underlying physical principles have been well-established, the effects of multibody interactions and orbital hybridization on plasmonic dynamics remain understudied. Here, in this work, we present the observation of conventional metallic and correlated plasmons in epitaxial La 1-x Sr x NiO 3 (LSNO) films with varying Sr doping concentrations (x = 0, 0.125, 0.25), unveiling their intriguing evolution. Unlike samples at other doping concentrations, the x = 0.125 intermediate doping sample does not exhibit the correlated plasmons despite showing high optical conductivity. Through experimental investigation using spectroscopic ellipsometry and X-ray absorption spectroscopy, that is further supported by theoretical calculations, the O2p-Ni3d orbital hybridization for x = 0.125 is found to be significantly enhanced, alongside a considerable weakening of its effective interaction comprising long-range Coulomb and variable interaction, U*. These factors account for the absence of correlated plasmons and the high optical conductivity observed in LSNO(0.125). Our findings highlight the significant impact of orbital hybridization on the electronic structures and the formation of quasiparticles in strongly correlated systems, opening new paths for plasmonic-based engineering research.

36 MATERIALS SCIENCE↗

Assembly and Characterization of Well Defined High Molecular Weight Poly(p-phenylene) Polymer Brushes

The assembly and characterization of well-defined, end-tethered poly(p-phenylene) (PPP) brushes having high molecular weight, low polydispersity and high 1,4-stereoregularity are presented. The PPP brushes are formed using a precursor route that relies on either self-assembly or spin coating of high molecular weight (degrees of polymerizations 54, 146, and 238) end-functionalized poly(1,3-cyclohexadiene) (PCHD) chains from benzene solutions onto silicon or quartz substrates, followed by aromatization of the end-attached PCHD chains on the surface. The approach allows the thickness (grafting density) of the brushes to be easily varied. The dry brushes before and after aromatization are characterized by ellipsometry, atomic force microscopy, grazing angle attenuated total reflectance Fourier transform infrared spectroscopy, and UV-Vis spectroscopy. The properties of the PPP brushes are compared with those of films made using oligo-paraphenylenes and with ab initio density functional theory simulations of optical properties. Our results suggest conversion to fully aromatized, end-tethered PPP polymer brushes having effective conjugation lengths of 5 phenyl units.

36 MATERIALS SCIENCE↗

Influence of Substrate Temperature on the Transformation Front Velocities That Determine Thermal Stability of Vapor-Deposited Glasses

Stable organic glasses prepared by physical vapor deposition transform into the supercooled liquid via propagating fronts of molecular mobility, a mechanism different from that exhibited by glasses prepared by cooling the liquid. In this paper, we show that spectroscopic ellipsometry can directly observe this front-based mechanism in real time and explore how the velocity of the front depends upon the substrate temperature during deposition. For the model glass former indomethacin, we detect surface-initiated mobility fronts in glasses formed at substrate temperatures between 0.68T g and 0.94T g . At each of two annealing temperatures, the substrate temperature during deposition can change the transformation front velocity by a factor of 6, and these changes are imperfectly correlated with the density of the glass. We also observe substrate-initiated fronts at some substrate temperatures. By connecting with theoretical work, we are able to infer the relative mobilities of stable glasses prepared at different substrate temperatures. Finally, an understanding of the transformation behavior of vapor-deposited glasses may be relevant for extending the lifetime of organic semiconducting devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synergism in Multicomponent Self-Propagating Molecular Assemblies

Multicomponent self-propagating molecular assemblies (SPMAs) have been generated from an organic chromophore, a redox-active polypyridyl complex, and PdCl{sub 2}. The structure of the multicomponent SPMA is not a linear combination of two assemblies generated with a single molecular constituent. Surface-confined assemblies formed from only the organic chromophore and PdCl{sub 2} are known to follow linear growth, whereas the combination of polypyridyl complexes and PdCl{sub 2} results in exponential growth. The present study demonstrates that an iterative deposition of both molecular building blocks with PdCl{sub 2} results in an exponentially growing assembly. The nature of the assembly mechanism is dictated by the polypyridyl complex and overrides the linear growth process of the organic component. Relatively smooth, multicomponent SPMAs have been obtained with a thickness of {approx}20 nm on silicon, glass, and indium-tin oxide (ITO) coated glass. Detailed information of the structure and of the surface-assembly chemistry were obtained using transmission optical (UV/Vis) spectroscopy, ellipsometry, atomic force microscopy (AFM), synchrotron X-ray reflectivity (XRR), and electrochemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structure and Growth of Vapor Deposited n-Dotriacontane Films Studied by X-ray Reflectivity

We have used synchrotron X-ray reflectivity measurements to investigate the structure of n-dotriacontane (n-C{sub 32}H{sub 66} or C32) films deposited from the vapor phase onto a SiO{sub 2}-coated Si(100) surface. Our primary motivation was to determine whether the structure and growth mode of these films differ from those deposited from solution on the same substrate. The vapor-deposited films had a thickness of {approx}50 thick as monitored in situ by high-resolution ellipsometry and were stable in air. Similar to the case of solution-deposited C32 films, we find that film growth in vacuum begins with a nearly complete bilayer adjacent to the SiO{sub 2} surface formed by C32 molecules aligned with their long axis parallel to the interface followed by one or more partial layers of perpendicular molecules. These molecular layers coexist with bulk particles at higher coverages. Furthermore, after thermally cycling our vapor-deposited samples at atmospheric pressure above the bulk C32 melting point, we find the structure of our films as a function of temperature to be consistent with a phase diagram inferred previously for similarly treated solution-deposited films. Our results resolve some of the discrepancies that Basu and Satija (Basu, S.; Satija, S. K. Langmuir 2007, 23, 8331) found between the structure of vapor-deposited and solution-deposited films of intermediate-length alkanes at room temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Interfacial Segregation in Polymer/Fullerene Blend Films for Photovoltaic Devices

It has recently been shown that surface energy effects can cause selective segregation at the active layer interfaces of a bulk heterojunction (BHJ) organic photovoltaic device. The active layer interface composition has been suggested to impact device performance. In this study changes in the BHJ vertical composition profile of BHJ active layers cast on two hole transport layers (HTL) with significantly different surface energies ({gamma}) are characterized using spectroscopic ellipsometry and near-edge X-ray absorption fine structure spectroscopy. Changes in the HTL {gamma} are shown to significantly affect the BHJ interfacial segregation at the buried interface near the HTL while the composition near the free surface (air) of the BHJ is unaffected. Despite the significant differences in vertical segregation at the HTL interface, the performances of the resulting organic photovoltaic devices were relatively similar.

36 MATERIALS SCIENCE↗

Manipulating Interfaces through Surface Confinement of Poly(glycidyl methacrylate)-block-poly(vinyldimethylazlactone), a Dually Reactive Block Copolymer

The assembly of dually reactive, well-defined diblock copolymers incorporating the chemoselective/functional monomer, 4,4-dimethyl-2-vinylazlactone (VDMA) and the surface-reactive monomer glycidyl methacrylate (GMA) is examined to understand how competition between surface attachment and microphase segregation influences interfacial structure. Reaction of the PGMA block with surface hydroxyl groups not only anchors the copolymer to the surface, but limits chain mobility, creating brush-like structures comprising PVDMA blocks, which contain reactive azlactone groups. The block copolymers are spin coated at various solution concentrations and annealed at elevated temperature to optimize film deposition to achieve a molecularly uniform layer. The thickness and structure of the polymer thin films are investigated by ellipsometry, infrared spectroscopy, and neutron reflectometry. The results show that deposition of PGMA-b-PVDMA provides a useful route to control film thickness while preserving azlactone groups that can be further modified with biotin-poly(ethylene glycol)amine to generate designer surfaces. The method described herein offers guidance for creating highly functional surfaces, films, or coatings through the use of dually reactive block copolymers and postpolymerization modification.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

"Micro-structure-macro-response" relationship in swollen block copolymer films

We demonstrate the effect of confinement on the thickness-dependent swelling behavior of poly(styrene)-b-poly(2-vinylpyridine) diblock copolymer films as revealed by in situ spectroscopic ellipsometry. 'Microscopic' molecular confinement to the dimension smaller than the characteristic lamella spacing, as well as to the non-equilibrium microstructures limits the solvent up-take by the polymer film. The maximum degree of swelling ('macroscopic response') is achieved for films with a starting thickness in a dry state h dr in the range of -one-two characteristic lamella dimension in bulk L 0 and drops down according to -h dr -0.1 as the film thickness increases up to -μm scale (-tens of L 0 ). These findings bring novel fundamental insights into the stimuli-responsive behavior of confined soft matter.

36 MATERIALS SCIENCE↗

Inferring relative dose-dependent color center populations in proton irradiated thoria single crystals using optical spectroscopy

In this work, we have utilized photoluminescence spectroscopy and optical ellipsometry to characterize the dose-dependence of the photoluminescence emission intensity and changes in optical absorption of thoria single crystals subject to irradiation with energetic protons at room- and elevated-temperatures. The photoluminescence peaks and the optical absorption bands are attributed to creation of new electronic states emerging from defects resulting from displacement damage. These bands are most likely associated with electrons trapped at the oxygen vacancy sites similar to color centers formed in other irradiated oxides and halides. Our experimental observations are supported by a standard density functional theory calculation of the electronic structure in pristine and oxygen vacancy-bearing thoria crystals. The dose-dependence of the intensity of the photoluminescence peaks is used to parameterize a rate theory model that estimates the concentration of color centers in the irradiated crystals. This parameterization provides optimized migration barrier parameters for oxygen interstitials and vacancies that simultaneously capture the optical response of the crystals irradiated at room- and elevated-temperature. These optical spectroscopy techniques offer a promising pathway to characterize the population of color centers formed at the sites of oxygen anion vacancies, particularly in irradiated nuclear fuels, where atomic-level defects cannot be readily imaged using electron microscopy. When combined with other direct and indirect characterization tools, our approach can provide new insight into defect formation and accumulation in energy materials over single atomic to extended length scales.

36 MATERIALS SCIENCE↗

Optical band gap and magnetic properties of unstrained EuTiO{sub 3} films

Phase-pure, stoichiometric, unstrained, epitaxial (001)-oriented EuTiO{sub 3} thin films have been grown on (001) SrTiO{sub 3} substrates by reactive molecular-beam epitaxy. Magnetization measurements show antiferromagnetic behavior with T{sub N}=5.5 K, similar to bulk EuTiO{sub 3}. Spectroscopic ellipsometry measurements reveal that EuTiO{sub 3} films have a direct optical band gap of 0.93{+-}0.07 eV.

36 MATERIALS SCIENCE↗

Annealing effects on the optical properties of semiconducting boron carbide

Infrared vibrations of as-deposited and annealed semiconducting boron carbide thin films were investigated by midinfrared spectroscopic ellipsometry. The strong boron-hydrogen resonance at approx2560 cm{sup -1} in as-deposited films reveals considerable hydrogen incorporation during plasma-enhanced chemical vapor deposition. Extended annealing at 600 deg. C caused significant reduction in film thickness, substantial reduction of boron-hydrogen bond resonance absorption, and development of distinct blue-shifted boron-carbon and icosahedral vibration mode resonances. Our findings suggest that annealing results in substantial loss of hydrogen and in development of icosahedral structure, accompanied by strain relaxation and densification.

36 MATERIALS SCIENCE↗

Enhancement in the photocatalytic nature of nitrogen-doped PVD-grown titanium dioxide thin films

Nitrogen-doped titanium dioxide semiconductor photocatalytic thin films have been deposited by unbalanced reactive magnetron physical vapor deposition on glass substrates for self-cleaning applications. In order to increase the photocatalytic efficiency of the titania coatings, it is important to enhance the catalysts absorption of light from the solar spectra. Bearing this fact in mind, a reduction in the titania semiconductor band-gap has been attempted by using nitrogen doping from a coreactive gas mixture of N{sub 2}:O{sub 2} during the titanium sputtering process. Rutherford backscattering spectroscopy was used in order to assess the composition of the titania thin films, whereas heavy-ion elastic recoil detection analysis granted the evaluation of the doping level of nitrogen. X-ray photoelectron spectroscopy provided valuable information about the cation-anion binding within the semiconductor lattice. The as-deposited thin films were mostly amorphous, however, after a thermal annealing in vacuum at 500 deg. C the crystalline polymorph anatase and rutile phases have been developed, yielding an enhancement in the crystallinity. Spectroscopic ellipsometry experiments enabled the determination the refractive index of the thin films as a function of the wavelength, while from the optical transmittance it was possible to estimate the semiconductor indirect band-gap of these coatings, which has been proven to decrease as the N-doping increases. The photocatalytic performance of the titania films has been characterized by the degradation rate of an organic reactive dye under UV/visible irradiation. It has been found that for a certain critical limit of 1.19 at. % of nitrogen doping in the titania anatase crystalline lattice enhances the photocatalytic behavior of the thin films and it is in accordance with the observed semiconductor band-gap narrowing to 3.18 eV. By doping the titania lattice with nitrogen, the photocatalytic activity is enhanced under both UV and visible light.

36 MATERIALS SCIENCE↗

Optical Properties of Bismuth Germanate (BGO)

The optical dielectric function of bismuth germanate Bi4Ge3O12 has been measured using spectroscopic ellipsometry and optical transmission. Analysis near the direct band edge indicates that there are at least three critical points at 4.44 low intensity and at 4.75 and 4.91 high intensity. Using transmission measurements, the band gap is determined to be 4.20 eV, which is likely determined by the defects in the material. Comparisons are made with relativistic electronic structure and optical calculations based on the Engel Vosko generalized gradient approximation. The near-absorption-edge critical points are associated with spin-orbit-split bands which significantly modify the conduction bands.

36 MATERIALS SCIENCE↗

Hydrogen-doped In{sub 2}O{sub 3} transparent conducting oxide films prepared by solid-phase crystallization method

We have characterized amorphous to crystalline transformation of hydrogen (H)-doped In{sub 2}O{sub 3} (In{sub 2}O{sub 3}:H) films by transmission electron microscopy, thermal desorption spectroscopy, spectroscopic ellipsometry, and Hall measurements. The In{sub 2}O{sub 3}:H films that show a mixed-phase structure embedded with small density of crystalline grains in a large volume fraction of amorphous phase have been fabricated at room temperature by the sputtering of an In{sub 2}O{sub 3} ceramic target with introduction of H{sub 2}O vapor, and the films have been postannealed in vacuum to crystallize the amorphous phase. With increasing annealing temperature up to 200 deg. C, the film shows a large increase in Hall mobility ({mu}{sub Hall}) from 42 to 110 cm{sup 2}/V s and a decrease in carrier density (N{sub Hall}) from 4.6x10{sup 20} to 2.1x10{sup 20} cm{sup -3} with slight decrease in resistivity. The change in {mu}{sub Hall} and N{sub Hall} with annealing temperature is strongly correlated with the volume fractions of the amorphous and crystalline phases in the films. Analyses of dielectric functions of the films using the Drude model revealed that the high electron mobility in the crystallized films is attributed mainly to longer relaxation time rather than smaller effective mass, as compared with as-deposited films. Temperature-dependent Hall analysis, relationship between N{sub Hall} and {mu}{sub Hall}, and comparison between {mu}{sub Hall} and optical mobility showed that (i) scattering processes inside amorphous and/or crystalline matrices limit the mobility, (ii) doubly charged ionized impurity scattering is reduced by crystallization, and (iii) phonon scattering becomes dominant after crystallization in the In{sub 2}O{sub 3}:H films. The above results suggest that H-doping reduces carrier scattering in the crystallized In{sub 2}O{sub 3}:H and structural rearrangements during crystallization eliminate oxygen deficiency and generate H{sup +} that acts as a singly charged donor. In this article, we discuss the transport properties with the variation in microscopic and chemical structures in the In{sub 2}O{sub 3}:H films.

36 MATERIALS SCIENCE↗