Search NASA⌕ Search

SEARCH · Search NASA

Results for “Energy Models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
NASA NTRS2019

Modeling Mg II During Solar Flares. II. Nonequilibrium Effects

To extract the information that the Mg II NUV spectra (observed by the Interface Region Imaging Spectrograph) carry about the chromosphere during solar flares, and to validate models of energy transport via model–data comparison, forward modeling is required. The assumption of statistical equilibrium (SE) is typically used to obtain the atomic level populations from snapshots of flare atmospheres, due to computational necessity. However, it is possible that relying on SE could lead to spurious results. We compare solving the atomic level populations via SE versus a non-equilibrium (NEQ) time-dependent approach. This was achieved using flare simulations from RADYN alongside the minority species version MS_RADYN from which the time-dependent Mg II atomic level populations and radiation transfer were computed in complete frequency redistribution. The impacts on the emergent profiles, light curves, line ratios, and formation heights are discussed. In summary we note that NEQ effects during flares are typically important only in the initial stages and for a short period following the cessation of the energy injection. An analysis of the timescales of ionization equilibrium reveals that for most of the duration of the flare, when the temperatures and densities are sufficiently enhanced, the relaxation timescales are short (τrelax < 0.1 s), so that the equilibrium solution is an adequate approximation. These effects vary with the size of the flare, however. In weaker flares, effects can be more pronounced. We recommend that NEQ effects be considered when possible but that SE is sufficient at most stages of the flare.

Kerr, Graham S.↗
NASA NTRS1972

Liquid rocket performance computer model with distributed energy release

Development of a computer program for analyzing the effects of bipropellant spray combustion processes on liquid rocket performance is described and discussed. The distributed energy release (DER) computer program was designed to become part of the JANNAF liquid rocket performance evaluation methodology and to account for performance losses associated with the propellant combustion processes, e.g., incomplete spray gasification, imperfect mixing between sprays and their reacting vapors, residual mixture ratio striations in the flow, and two-phase flow effects. The DER computer program begins by initializing the combustion field at the injection end of a conventional liquid rocket engine, based on injector and chamber design detail, and on propellant and combustion gas properties. It analyzes bipropellant combustion, proceeding stepwise down the chamber from those initial conditions through the nozzle throat.

Combs, L. P.↗
NASA NTRS1974

Liquid rocket combustion computer model with distributed energy release. DER computer program documentation and user's guide, volume 1

A computer program for analyzing rocket engine performance was developed. The program is concerned with the formation, distribution, flow, and combustion of liquid sprays and combustion product gases in conventional rocket combustion chambers. The capabilities of the program to determine the combustion characteristics of the rocket engine are described. Sample data code sheets show the correct sequence and formats for variable values and include notes concerning options to bypass the input of certain data. A seperate list defines the variables and indicates their required dimensions.

Combs, L. P.↗
NASA NTRS1975

A dynamic model for the time evolution of the modulated cosmic ray spectrum

A recently developed model predicts an energy dependent phase lag in the modulated cosmic ray density U(t) given by U(t) approximately equal to US (t - tau) where US is the solution to the Fokker-Planck equation under time independent conditions and tau is the average time spent by particles inside the modulating region. The delay times tau are functions of modulating parameters R (the radius of the modulating cavity), V (the solar wind velocity), and K (the effective average diffusion-coefficient which is a function of energy). This model is applied to predict the time evolution of the modulated cosmic ray proton spectrum over a simulated solar cycle. A modulation produced mostly by varying R over the solar cycle is less consistent with the observations.

Ogallagher, J. J.↗
NASA NTRS1979

The energy distribution of Sirius B

The origin of the X-ray emission observed from the DA white dwarf Sirius B is investigated on the basis of low-resolution short wavelength IUE spectrum. Following a correction for the influence of scattered light from Sirius A, the intensity distribution of Sirius B is obtained as a function of wavelength. Comparison of the continuous energy distribution with model atmosphere energy distributions indicates an effective temperature of 25,500 K, which is not high enough to explain the observed X rays as normal photospheric radiation. In addition, with the exception of an unusual feature in the neighborhood of the C I 1657 line, no clear evidence is found of emission lines indicative of a corona, chromosphere or disk, and the origin of the X rays remains unknown.

Boehm-Vitense, E.↗
NASA NTRS1981

The ultraviolet energy distributions of late A stars

Observed late A star energy distributions for the wavelength range 1400-2500 A are compared. No difference is found between energy distributions of Am stars and those of normal slowly rotating A stars. The fluxes of rapidly rotating stars, however, appear to be increased for wavelengths smaller than 1530 A; this cannot be understood as an effect of pole heating or reduced gravity. In addition, the comparison of the UV energy distributions with model atmosphere energy distributions of Kurucz indicates some problems with the theoretical Si I absorption edges at 1530 A.

Boehm-Vitense, E.↗
NASA NTRS1985

Cepheid distances from blue main-sequence companions

The absolute visual magnitudes of main-sequence Cepheid companions are here determined from their effective temperatures. The latter are obtained by comparing the measured relative energy distributions with model atmosphere energy distributions. Assuming an average Galactic extinction law, it is found that the distance moduli for the Cepheids should be smaller by Delta (mv-Mv) = -0.5 as compared to the Sandage-Tammann relation.

Bohm-Vitense, E.↗
NASA NTRS1985

Understanding metabolic alterations in space flight using quantitative models - Fluid and energy balance

The results of an integrated multidisciplinary and multiexperimental investigation, using data from the Skylab program, of metabolic adaptation to space flight are summarized and discussed. The effects of space flight on fluid-electrolyte regulation, mechanisms of hormone disturbances, energy balance, and the etiology of weight loss are emphasized. A composite picture of the fluid, electrolyte, and energy response to weightlessness, based primarily on data gathered from the nine Skylab crewmen, is presented.

Leonard, J. I.↗
NASA NTRS1993

Numerical modeling of the energy storage and release in solar flares

This paper reports on investigation of the photospheric magnetic field-line footpoint motion (usually referred to as shear motion) and magnetic flux emerging from below the surface in relation to energy storage in a solar flare. These causality relationships are demonstrated by using numerical magnetohydrodynamic simulations. From these results, one may conclude that the energy stored in solar flares is in the form of currents. The dynamic process through which these currents reach a critical value is discussed as well as how these currents lead to energy release, such as the explosive events of solar flares.

Wu, S. T.↗
NASA NTRS1992

Conversion of bioprocess ethanol to industrial chemical products - Applications of process models for energy-economic assessments

An assessment approach for accurate evaluation of bioprocesses for large-scale production of industrial chemicals is presented. Detailed energy-economic assessments of a potential esterification process were performed, where ethanol vapor in the presence of water from a bioreactor is catalytically converted to ethyl acetate. Results show that such processes are likely to become more competitive as the cost of substrates decreases relative to petrolium costs. A commercial ASPEN process simulation provided a reasonably consistent comparison with energy economics calculated using JPL developed software. Detailed evaluations of the sensitivity of production cost to material costs and annual production rates are discussed.

Rohatgi, Naresh K.↗
NASA NTRS1995

RTE: A computer code for Rocket Thermal Evaluation

The numerical model for a rocket thermal analysis code (RTE) is discussed. RTE is a comprehensive thermal analysis code for thermal analysis of regeneratively cooled rocket engines. The input to the code consists of the composition of fuel/oxidant mixture and flow rates, chamber pressure, coolant temperature and pressure. dimensions of the engine, materials and the number of nodes in different parts of the engine. The code allows for temperature variation in axial, radial and circumferential directions. By implementing an iterative scheme, it provides nodal temperature distribution, rates of heat transfer, hot gas and coolant thermal and transport properties. The fuel/oxidant mixture ratio can be varied along the thrust chamber. This feature allows the user to incorporate a non-equilibrium model or an energy release model for the hot-gas-side. The user has the option of bypassing the hot-gas-side calculations and directly inputting the gas-side fluxes. This feature is used to link RTE to a boundary layer module for the hot-gas-side heat flux calculations.

Naraghi, Mohammad H. N.↗
NASA NTRS1997

An Energy-Based Hysteresis Model for Magnetostrictive Transducers

This paper addresses the modeling of hysteresis in magnetostrictive transducers. This is considered in the context of control applications which require an accurate characterization of the relation between input currents and strains output by the transducer. This relation typically exhibits significant nonlinearities and hysteresis due to inherent properties of magnetostrictive materials. The characterization considered here is based upon the Jiles-Atherton mean field model for ferromagnetic hysteresis in combination with a quadratic moment rotation model for magnetostriction. As demonstrated through comparison with experimental data, the magnetization model very adequately quantifies both major and minor loops under various operating conditions. The combined model can then be used to accurately characterize output strains at moderate drive levels. The advantages to this model lie in the small number (six) of required parameters and the flexibility it exhibits in a variety of operating conditions.

Calkins, F. T.↗
NASA NTRS2002

Urban Surface Radiative Energy Budgets Determined Using Aircraft Scanner Data

It is estimated that by the year 2025, 80% of the world's population will live in cities. The extent of these urban areas across the world can be seen in an image of city lights from the Defense Meteorological Satellite Program. In many areas of North America and Europe, it is difficult to separate individual cities because of the dramatic growth and sprawl of urbanized areas. This conversion of the natural landscape vegetation into man-made urban structures such as roads and buildings drastically alter the regional surface energy budgets, hydrology, precipitation patterns, and meteorology. One of the earliest recognized and measured phenomena of urbanization is the urban heat island (UHI) which was reported as early as 1833 for London and 1862 for Paris. The urban heat island results from the energy that is absorbed by man-made materials during the day and is released at night resulting in the heating of the air within the urban area. The magnitude of the air temperature difference between the urban and surrounding countryside is highly dependent on the structure of the urban area, amount of solar immolation received during the day, and atmospheric conditions during the night. These night time air temperature differences can be in the range of 2 to 5 C. or greater. Although day time air temperature differences between urban areas and the countryside exists during the day, atmospheric mixing and stability reduce the magnitude. This phenomena is not limited to large urban areas, but also occurs in smaller metropolitan areas. The UHI has significant impacts on the urban air quality, meteorology, energy use, and human health. The UPI can be mitigated through increasing the amount of vegetation and modification of urban surfaces using high albedo materials for roofs and paved surfaces. To understand why the urban heat island phenomenon exists it is useful to define the surface in terms of the surface energy budget. Surface temperature and albedo is a major component of the surface energy budget. Knowledge of it is important in any attempt to describe the radiative and mass fluxes which occur at the surface. Use of energy terms in modeling surface energy budgets allows the direct comparison of various land surfaces encountered in a urban landscape, from vegetated (forest and herbaceous) to non-vegetated (bare soil, roads, and buildings). These terms are also easily measured using remote sensing from aircraft or satellite platforms allowing one to examine the spacial variability. The partitioning of energy budget terms depends on the surface type. In natural landscapes, the partitioning is dependent on canopy biomass, leaf area index, aerodynamic roughness, and moisture status, all of which are influenced by the development stage of the ecosystem. In urban landscapes, coverage by man-made materials substantially alters the surface face energy budget. The remotely sensed data obtained from aircraft and satellites, when properly calibrated allows the measurement of important terms in the radiative surface energy budget a urban landscape scale.

Luvall, Jeffrey C.↗
NASA NTRS2004

Spatially Complete Surface Albedo Data Sets: Value-Added Products Derived from Terra MODIS Land Products

Spectral land surface albedo is an important parameter for describing the radiative properties of the Earth. Accordingly it reflects the consequences of natural and human interactions, such as anthropogenic, meteorological, and phenological effects, on global and local climatological trends. Consequently, albedos are integral parts in a variety of research areas, such as general circulation models (GCMs), energy balance studies, modeling of land use and land use change, and biophysical, oceanographic, and meteorological studies. The availability of global albedo data over a large range of spectral channels and at high spatial resolution has dramatically improved with the launch of the Moderate Resolution Imaging Spectroradiometer (MODIS) instrument aboard NASA s Earth Observing System (EOS) Terra spacecraft in December 1999. However, lack of spatial and temporal coverage due to cloud and snow effects can preclude utilization of official products in production and research studies. We report on a technique used to fill incomplete MOD43 albedo data sets with the intention of providing complete value-added maps. The technique is influenced by the phenological concept that within a certain area, a pixel s ecosystem class should exhibit similar growth cycle events over the same time period. The shape of an area s phenological temporal curve can be imposed upon existing pixel-level data to fill missing temporal points. The methodology will be reviewed by showcasing 2001 global and regional results of complete albedo and NDVl data sets.

Moody, E. G.↗