SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Linker engineering of the UiO-66-based metal–organic framework series reveals its untapped potential as nanofillers for boosting the heat-resistant electrostatic energy storage performance of polyetherimide at 200 °C.
The U.S. Department of Energy (DOE) national laboratories represent a unique class of government‐owned, contractor‐operated research institutions dedicated to conducting research and development (R&D) related activities that address national priorities, supporting and advancing the DOE mission. They play a vital role in sustaining U.S. innovation capacity, stewarding the nation's technical base, and nurturing science and technologies. In this perspective, we highlight the processing science and scaleup capabilities of the Materials Engineering Research Facility (MERF) at DOE's Argonne National Laboratory to demonstrate how DOE National Laboratories bridge fundamental science and applied technology development to accelerate deployment. Case studies are presented on selective membranes for critical mineral recovery, sensors for per‐ and polyfluoroalkyl substances (PFAS) detection, surface functionalization via atomic layer deposition (ALD) and sequential infiltration synthesis (SIS), and lithium recovery from battery recycling waste streams using a novel electrodialysis process. These examples underscore MERF's role in translating innovative technologies into practical solutions for renewable water and critical resource recovery, which also leverage Argonne's analytical and computational capabilities. This perspective also outlines mechanisms for collaborating with the DOE national laboratories to strengthen partnerships across government, the national laboratories, academia, and industry.
Controlling structural features of sensing material while judiciously introducing vacancy defect states for revamping the electronic properties of the sample to obtain its superior gas sensing performance, is quite rare. Herein, we report for the first time, the room temperature (RT) ammonia (NH 3 ) detection of peanut-like porous bismuth vanadate (BiVO 4 ) with a stable monoclinic phase. The developed BiVO 4 possess abundant oxygen vacancies and porosity by virtue of calcinations (400–800 ℃). BiVO 4 calcined at 400 ℃ exhibits high selectivity towards NH 3 with a maximum response of 1421 @ 270 ppm at RT, which is 2.5 fold enhanced compared to without calcined BiVO 4 (response of 547 @ 270 ppm NH 3 ). The oxygen defective BiVO 4 appeared highly durable and stable even under high humid conditions (∼60 %). Besides, the porosity of BiVO 4 not only enhances the specific surface area (19.8 m 2 /g) but also results in fast diffusion of NH 3 molecules, leading to a reduction in the decay time (34 s for 90 ppm NH 3 ). The density functional theory (DFT) uncovers that the oxygen vacancy formation in BiVO 4 augments the NH 3 sensing capabilities by enhancing the adsorption energy of NH 3 . This work provides insight into the sensing mechanism of increased response caused by defect engineering and porosity, which will be favourable for fabricating high-performance NH 3 sensors at RT.
This case study workbook provides a hypothetical project to support discussion and application of Cyber-Informed Engineering principles. Participants in the workshop are encouraged to use the workbook to capture insights and lessons learned.
Electrocatalytic nitrate reduction reaction (NO 3 RR) presents a sustainable paradigm for green NH 3 synthesis and NO 3 − wastewater valorization. However, overcoming sluggish NO 3 RR kinetics under industrial-current operation persists as a critical challenge. Herein, robust oxygen vacancy-enriched heterostructures (O v -Co(OH) 2 /Cu) are engineered through in situ electrochemical reconstruction. By coupling Cu-mediated NO 3 − -to-NO 2 − conversion with O v -Co(OH) 2 -accelerated NO 2 − -to-NH 3 transformation, this heterostructured system delivers an unprecedented NH 3 yield rate of 167.8 mg h −1 cm −2 and 97.7% Faradaic efficiency at >2 A cm −2 , while maintaining exceptional current tolerance over 25 h. Operando spectroscopic characterizations and theoretical calculations reveal that the introduction of O v in Co(OH) 2 synergistically accelerates water dissociation to ensure continuous hydrogen supply and optimizes *NOOH adsorption, reducing the energy barrier for the rate-limiting step (*NO 2 to *NOOH). To demonstrate practical viability, a membrane-electrode-assembly electrolyzer integrating NO 3 RR with glycerol oxidation reaction achieves highly effective co-production of NH 3 and formate alongside wastewater treatment. In conclusion, this work offers new insights into the rational design of electrocatalysts through in situ reconstruction-induced vacancy engineering for scalable and practical NO 3 RR applications.
The transport properties of CrN thin films deposited on sapphire have been tailored through structural modifications induced by cumulative argon implantation. As-grown samples experience the typical structural transition in CrN films from orthorhombic at low temperature to cubic above the Néel temperature (≈280 K) and exhibit a metallic-like conduction in both phases. With increasing implantation dose, the conduction mode shifts to a semiconductor-like behavior in both phases, albeit at different damage levels. Analysis of the results suggests that hopping conduction becomes dominant beyond a given damage threshold. The results highlight a promising correlation between defect engineering and conduction mechanisms, offering valuable insights into the versatile electrical properties of CrN films. These implantation-induced defects scatter carriers, leading to a decrease in their mobility. As the implantation dose increases, the defect landscape evolves, modifying the density of states. However, up to a dose of 0.050 dpa, no significant influence on phonon scattering is observed. This approach demonstrates that ion implantation enables precise tuning of CrN's electrical properties without affecting thermal conductivity, offering valuable insights into defect engineering in transition metal nitrides and underscoring its potential for transport properties decorrelation.
Abstract Optically stimulated luminescence (OSL) materials hold great potential for optical data storage (ODS) and anticounterfeiting applications. Nevertheless, the scarcity of suitable luminescent materials with deep‐level traps remains a significant obstacle. Herein, a host substation strategy have been employed to tune the persistent luminescence (PersL) and OSL properties of Ca 3 Ga 4 O 9 :Tb 3+ by Al 3+ substitution through trap engineering and demonstrated their potential. Specifically, the photoluminescence of the Ca 2.985 (Ga 1‐y% Al y% ) 4 O 9 :0.5%Tb 3+ of Tb 3+ is first investigated due to its different occupancies of Ca 2+ . The influence of host substitution on the crystal structure, trap depth, trap density, PersL, and OSL properties have further investigated. A series of strong PersL and OSL peaks from the Ca 2.985 (Ga 1‐y% Al y% ) 4 O 9 :0.5%Tb 3+ with bluish‐green emissions have been observed. The Ca 2.985 (Ga 1‐y% Al y% ) 4 O 9 :0.5%Tb 3+ have shown controllable photon release upon thermal and optical stimuli, enhancing their performance for ODS. Thermally stimulated luminescence suggests that vacancy and defect concentrations inside the Ca 3‐x% (Ga 1‐y% Al y% ) 4 O 9 :x%Tb 3+ can be manipulated by Tb 3+ doping and Al 3+ substitution, which ultimately leads to the formation of deep traps and a broad distribution of traps with increased deep trap concentration. The work demonstrates that trap engineering through Al 3 ⁺ substitution is an effective method for tuning PersL and OSL properties of Ca 2.985 (Ga 1‐y% Al y% ) 4 O 9 :0.5%Tb 3+ for ODS.
Bandgap engineering is a critical tool for tailoring the electronic properties of functional materials, traditionally achieved by modifying the cation sublattice. Here, a generalizable strategy is introduced that leverages facile anion-lattice doping in high entropy materials to modulate the bandgap in high-entropy metal oxides (HEMOs). By incorporating nitrogen into a single-phase high-entropy metal oxide/nitride (HEMO:HEMN) solid solution, a substantial bandgap reduction is achieved from 3.55 eV (HEMO) to ≈2.46 eV (HEMO:HEMN), significantly enhancing electronic conductivity. Unlike conventional bandgap tuning approaches that rely on cation substitution or heterojunction formation, this method exploits anion-mediated entropy stabilization, enabling uniform bandgap narrowing across the entire solid solution. This anion-lattice engineering strategy is broadly applicable to high-entropy systems, providing a new pathway for designing energy materials with tailored electronic properties. The resulting HEMO:HEMN solid solution exhibits a tenfold increase in capacitance and capacity compared to HEMO in supercapacitor and lithium-ion battery tests, demonstrating the transformative potential of anion-driven bandgap modulation for next-generation energy storage and conversion technologies.
Janus configurations, characterized by their inherent asymmetry, enable directional mass transfer in membrane materials that drive novel and energy-efficient chemical processes. This Janus superiority spans applications from nanoscale molecular and ionic transport to macro-scale separation systems with asymmetric spatial architectures. This review provides an analysis of the material foundations including design principles, structure regulation, and scalability challenges underlying Janus membranes. Here, we explore the physics that governs their unique behavior and examine their diverse applications across chemical engineering, including phase transfer, and molecular or ionic transport. Through a multiscale perspective, we provide a comprehensive understanding of the impact of Janus superiority in advancing chemical engineering technologies. Finally, we discuss the hurdles in translating theoretical advances into practical applications and propose promising avenues for future research to harness the full potential of Janus membranes and systems in addressing global challenges related to energy, sustainability, and beyond.
Multi-material products that combine multiple complementary polymers can create products with desired performance but present challenges to end-of-life (EoL) management. The emerging mono-material product design based on a single polymer type addresses the fundamental EoL issue, but challenges of delivering vastly tunable material properties by the single polymer still remain. Here, we introduce a simple strategy to produce biodegradable poly(3-hydroxybutyrate) (P3HB) materials with a wide range of material properties by engineering a stereomicrostructure continuum, achieved through polymerizing diastereomeric mixtures of racemic and meso-dimethyl diolides at various feed ratios with a single catalyst. This one-step, one-pot process produces biodegradable P3HB mono-materials ranging from rigid to flexible thermoplastics, to tough thermoplastic elastomers, to a pressure-sensitive adhesive (PSA), which have been then combined to fabricate prototype all-P3HB PSA tapes, demonstrating the feasibility of designing mono-material products through engineering polymer stereomicrostructures.
Although lignocellulosic biomass is a renewable resource with the potential to replace fossil-derived fuels and chemicals, its recalcitrance, largely due to lignin, limits its utilization. Recent advancements in genetic engineering have produced transgenic trees with reduced lignin content and/or modified lignin structure without compromising growth traits. Here, three engineered poplar varieties are evaluated as feedstocks using a biocompatible one-pot deep eutectic solvent-mediated process that integrates biomass fractionation and enzymatic saccharification within a single reactor, eliminating water washing and reconditioning. All transgenic poplars exhibit higher fermentable sugar yields than wild-type (WT) trees. Notably, QsuB poplar, incorporating 3,4-dihydroxybenzoate in lignin, achieves the highest glucose conversion yield of 91.3% (vs. 73.0% from WT). AT5 and MdCHS3 poplars, incorporating ferulate esters and naringenin, also demonstrate improved glucose yields (86.7 and 84.7%, respectively), confirming reduced biomass recalcitrance. Additionally, residual lignins are valorized via hydrogenolysis into phenolic compounds, with comparable alkylphenol production across all lines. These findings demonstrate that the transgenic poplar lines not only serve as superior feedstocks for sugar conversion but also provide a rich resource for phenolic compound production, enhancing the operational and economic viability of integrated biorefinery processes.
Collagen-mimetic peptides (CMPs) are engineered molecules designed to replicate the triple-helical structure of natural collagen. A repeating x–y-Gly sequence is the defining motif of CMPs and is critical to their triple-helical structure and stability. Substitutions to the residues occupying the x and y positions present a means to modulate the CMP structure and properties. Peptoid residues—N-substituted glycine derivatives—present an attractive potential substitution due to their thermal stability, proteolytic resistance, biocompatibility, and diverse palette of non-natural side chains, but also tend to introduce a high degree of backbone flexibility that can diminish the stability of the triple helix. In this work, we report a computational active learning cycle comprising molecular dynamics simulation, Gaussian process regression, and Bayesian optimization to computationally identify a number of promising peptoid substitutions predicted to stabilize the desired quaternary structure through side chain interactions and produce stable peptoid-based collagen-like triple helices. To experimentally test the computational predictions, a top candidate identified by the screen was synthesized and imaged using scanning electron microscopy to resolve fibril-like bundles consistent with collagen-like triple helices. This work predicts a number of CMP peptoid substitutions capable of forming stable triple-helical structures, presents a generalizable design strategy for engineering desired peptoid structures, and opens new avenues for the design of peptoid-based biomimetic materials.
An overview of lithium-ion battery safety as it pertains to fire protection engineers for the 6th edition of the Society of Fire Protection Engineering Handbook
This study examines the potential of two variants of the material point method—the generalized interpolation material point (GIMP) and dual domain material point (DDMP) methods—in developing a robust computational framework for engineering lattice structures under different loading conditions. The study begins with assessing the ability of the two methods in predicting elastic buckling phenomena using column geometries with and without initial geometric imperfections. The results indicate that both methods effectively capture buckling phenomena when initial geometric imperfections are introduced. After this verification step, we create several models of tetrahedral lattice structures with varying strut diameter and orientation and subject them to quasi-static loading. We then validate the numerical results using laboratory test results. The results show that, while both methods accurately predict load–displacement curves in the pre-buckling regime, their predictive capabilities diminish in the post-buckling regime. Through visual comparison between the numerical and experimental deformed shapes, it appears that the discrepancies between model and experimental results are attributed to initial geometric imperfections in the lattices that occurred during 3D printing. We then establish a second set of lattice models where different types of initial geometric imperfections are considered. The results from these models show that imperfections have a negligible influence in the pre-buckling regime but affect the behavior considerably in the post-buckling regime. As a final step in this work, we subject the lattice models to impact loading and employ hypothetical soft and stiff materials. These results show that the lattice stiffness, which depends on material stiffness, strut diameter, and orientation, significantly influences the ability of a lattice structure to resist impact. In particular, we find that a stiffer lattice (i.e., one made with a stiff material and thicker struts) is capable of absorbing more energy than a softer one during impact. Although material nonlinearities, inelasticity, and detailed contact formulations are not considered in this study, the findings obtained herein lay the groundwork for engineering lattice structures under extreme loading conditions through a simulation-driven framework based on particle-based methods.
Abstract Buffer material is crucial for the engineering barrier system to dispose of high-level radioactive waste in a geological repository. A reliable buffer material should be able to maintain good sealing characteristics and minimize desiccation cracking. In this study, the effectiveness of inorganic fiber-reinforced engineering barrier material in reducing desiccation cracks in bentonite was evaluated via desiccation tests, image analysis, and air permeability tests. The effects of fiber type (E-glass fiber and basalt fiber) and fiber content (0.0%, 0.5%, 1.0%, 1.5%, 3.0%, and 5.0% of dry weight of the bentonite) on the development of desiccation cracks in the fiber–bentonite mixtures with the same given initial moisture content were evaluated. The results indicated that the addition of fibers could significantly reduce the crack size and area in bentonite during the drying. Basalt fibers showed a slightly better reinforcement effect than E-glass fibers when the fiber content was lower than 3.0%. The addition of fibers prevented the development of penetrating cracks and significantly reduced the permeability of the bentonite after drying. The permeabilities of basalt fiber- and E-glass fiber-reinforced bentonite composites with 3% reinforcement were 5.81 × 10 –11 m 2 and 7.24 × 10 –11 m 2 , respectively, which were 64 and 51 times smaller than that of pure bentonite. X-ray–CT observation of the internal structure of the samples after drying showed that the addition of fibers significantly changed the crack morphology and potentially increased the tortuosity.
Unraveling the correlation between strain engineering with anisotropic optical properties via nanoscale defects gradually evolved into a strategy for fundamental studies and technological applications, yet it remains understudied in functional complex oxides compared to metals and semiconductors. Here, the methodology of strain engineering for the determination of the lattice parameters, parallel/normal to the sample surface, in the individual layers of single-crystalline superlattices is derived, which is based on analysis of high-angle X-ray diffraction measurements in combination with diffraction reciprocal space mapping. With modeling that takes into account the effect of elastic properties, two elastically anisotropic materials, SrTiO 3 and ZrO 2 , have been compared in terms of defect-induced elastic strain caused by individual and sequential H + and He 2+ irradiation. The anisotropic lattice swelling with corresponding refractive index, and obstructive behavior of elastic strain recovery are demonstrated in SrTiO 3 , while approaching strain behaviors accompanied by isotropic refractive index distribution in both orientations are confirmed in ZrO 2 . Under sequential He 2+ /H + irradiation, pre-existing He-vacancy complexes acted as vacancy traps, preferentially capturing H + clusters to induce lattice distortion and enhance absorption. Nanohardness increments (ΔH) calculated by the DBH model matched nanoindentation results, confirming that sequential irradiation generated higher indentation yield stress than individual irradiations.
Rhodosporidium toruloides has gained increasing interests as a promising non-model host organism to produce a wide range of bioproducts from lignocellulosic biomass. Increasing the bioproduct titers, rates, and yields remains a challenge, largely due to a lack of robust and well-characterized genetic tools in this host. Here we developed an inducible flippase (FLP) and flippase recognition target (FRT) system that enables genetic manipulations without the need for additional selection markers. Synthetic inducible promoters were established, enabling regulation of FLP expression and efficient antibiotic marker removal. Leveraging this system, we engineered a strain to optimize 3-hydroxypropionic acid (3HP) production. Over four rounds of iterative genomic editing to resolve pathway bottlenecks, we achieved a 3HP titer of 69.4 g/L in fed-batch fermentation - the highest level reported in yeast from lignocellulosic hydrolysates. The engineered high 3HP producing strain offers a robust platform for sustainable bio-based chemical production from lignocellulosic feedstocks.
This work evaluates the Modular Hydrothermal Liquefaction System (MHTLS), an engineering-scale, integrated continuous HTL plant operated at the Pacific Northwest National Laboratory (PNNL), for converting realistic wet wastes into energy-dense biocrudes. The production campaigns discussed here processed algae, sewage sludges, lignocellulosic blends, Industrial food waste, and engineered food-waste slurries at 350?°C and around 200?bar, with nominal feed rates of ~12?L?h?¹. We report biocrude yields and composition, establish mass and elemental (C, N) balances, and quantify energy performance via heater duties, heat-exchanger behavior, and system-level efficiencies. Biocrudes contained 76–80?wt?% C (dry, ash-free) with HHVs of 38-41?MJ?kg?¹, substantially higher than feed materials HHVs of 16.6–26.1?MJ?kg?¹ and approaching petroleum fuels. Dry, ash-free biocrude yields of 32–53?wt?% corresponded to 43–71?wt?% carbon yields, with 18–40?wt?% of feed carbon routed to the aqueous phase. Thermal efficiencies were 50-65%, and total energy efficiencies, including reactor heat input, were 35-55%. A counter-current tube-in-tube heat exchanger delivered U values of 200–450?W?m?²?K?¹, with fouling-induced declines impacting heat recovery and heater duty. The analysis highlights three priorities for the process intensification of HTL: robust, fouling-resistant heat recovery, hydrodynamically suitable reactor and heat-exchanger designs, simplified and predictable solids management, and biocrude-water separation.