COTS EEEE Parts: What Do the Data and Experiences Tell Us?
This is a 12-minute presentation that highlights many of the actual experiential elements from the use COTS in space, covering a time span of over 20 years.
Jesse Leitner↗
SEARCH · Search NASA
Results for “Experiment Data”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Assessment of Buffer-IPyC Thermomechanical Debonding Behavior Using New Experiment Strength Data in BISON
TRIstructural ISOtropic (TRISO) single sub-millimeter-diameter nuclear fuel particle consists of a spherical fuel kernel surrounded by four coating layers. During reactor operation, the TRISO coating layers are subjected to irradiation-induced dimensional changes and the associated thermomechanical behavior of each layer. One of the observed behaviors is gap formation between the buffer and IPyC layer due to the porous buffer’s irradiation-induced shrinkage exceeding that of the IPyC layer. To predict TRISO thermomechanical performance, multi-physics models have been built that are continually updated and refined. The BISON code is a finite element-based nuclear fuel performance code that may be used for TRISO particle simulations. One of the recent additions to the BISON code is the ability to model the process of layer debonding. This paper will focus on the simulation results of the improved BISON debonding model that will utilize updated strengths measured from irradiated TRISO fuel particles. The new experimental strength data from micromechanical tests of irradiated TRISO fuel samples were exercised in the BISON simulations and compared to baseline strength data to assess their applicability in the models. This also includes updated buffer-IPyC bond strengths to simulate layer delamination. Based on current experimental observations it is noted that the buffer-IPyC separation occurs not exactly at the junction of these two layers, but more on the side of the buffer layer. This improved modeling approach using experimental strength data to characterize buffer-IPyC debonding and its potential subsequent cracking will be presented in the paper along with comparisons to available experimental observations.
11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
Development of flight experiment work performance and workstation interface requirements, part 1. Technical report and appendices A through G
A skill requirement definition method was applied to the problem of determining, at an early stage in system/mission definition, the skills required of on-orbit crew personnel whose activities will be related to the conduct or support of earth-orbital research. The experiment data base was selected from proposed experiments in NASA's earth orbital research and application investigation program as related to space shuttle missions, specifically those being considered for Sortie Lab. Concepts for two integrated workstation consoles for Sortie Lab experiment operations were developed, one each for earth observations and materials sciences payloads, utilizing a common supporting subsystems core console. A comprehensive data base of crew functions, operating environments, task dependencies, task-skills and occupational skills applicable to a representative cross section of earth orbital research experiments is presented. All data has been coded alphanumerically to permit efficient, low cost exercise and application of the data through automatic data processing in the future.
Hatterick, R. G.↗
The EUCLID Experiment and Nuclear Data Library Comparisons
The EUCLID (Experiments Underpinned by Computational Learning for Improvements in Nuclear Data) project at Los Alamos National Laboratory (LANL) was a Laboratory Directed Research and Development project which aimed to reduce compensating errors in nuclear data. One major component of the project was a series of critical experiments, both measuring k eff and various other observables with the goal of using these experiments to constrain 239 Pu nuclear data uncertainties and identify compensating errors. This paper details some of the experiment design and how various nuclear data libraries simulate the EUCLID system, including sensitivities compared to Jezebel.
46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
OPLE data analysis
Omega position location equipment /OPLE/ experiment data analysis, obtaining quantitative measure of statistical performance of system
Obryant, R.↗
Future timing accuracy requirements and procedures for data processing
Timing accuracy requirements for satellite experiment data are discussed. Although time accuracies of 100 milliseconds were sufficient when OSO-3, 4, 5 were launched in the mid-60s, time accuracies of 100 microseconds are necessary for OSO-8, HEAO-A, and Seasat, and it is thought likely that accuracies of 10 microseconds will become routine in the 1980s. An approach to the problem of identifying the sources of spacecraft timing errors - from the onboard counters to the final tagging of data - is considered.
Smith, G. A.↗
Mineralogy of the Martian surface from Mariner 6/7 infrared spectrometer data
The Mariner 6/7 Infrared Spectrometer (IRS) experiment data from the 1969 Mars flyby encounters represent a valuable source of information about the IR reflection/emission spectrum of Mars in the 1.9 and 14.4 micron region. During 1990, the wavelength calibration of the IRS data was completely redone, using information from inflight spectra of Mars taken through a polystyrene film and from the locations of Martian CO2 bands. The response functions of the two instruments were then rederived using laboratory black body spectra. Also, a particular approach was taken to study the IRS data in which the effects of uncertain wavelength and intensity calibration can be minimized. This involves doing ratios of spectra. These are of particular value when applied to study contrasts between various albedo domains on the Mars surface and between spectra with differing emission angle. The latter provide a means of assessing the contribution of the atmosphere and airborne dust to the spectra. Given here are graphs showing two near infrared radiance spectra for very different albedo regions and a ratio of two spectra obtained at very different total solar pathlength (airmass).
Martin, T. Z.↗
MARCE data evaluation
The Get Away Special (GAS) 007 Project Explorer Experiment data recorded and radio downlinked by the Marshall Amateur Radio Club Experiment (MARCE), the first GAS radio experiment, are compared and evaluated. A compatibility assessment, of the student experiments and the MARCE power, control and data systems, during the STS-61C Columbia flight in January 1986 is presented. Analysis of the GAS container's thermal environment, located near the center of the GAS Bridge is discussed.
Stluka, Edward F.↗
Early results of the ATS-6 solar cell flight experiment
This paper presents preliminary ATS-6 solar-cell flight-experiment data through the first 247 days in synchronous orbit. The experiment is transmitting data on forty 2 x 2-cm solar cells representing 16 solar-cell configurations. The experiment is designed to study the effect of this orbit on select solar cells and cover-glass parameters such as solar-cell thickness and base resistivity, cover-glass thickness variation, new cover processes, and materials such as 7940 and 7070 integral covers as well as the FEP covers, the COMSAT 'violet' cell, and backside irradiation effects. The in-space solar-cell data indicate short-circuit currents are running higher by 1% to 8% than in measurements made with solar simulations; maximum power varied between -1% and +6%. Degradation of short-circuit current due to ultraviolet effects was determined to be about 2% after 50 days in orbit. All cells performed well through 247 days in orbit except the FEP-covered cells, which appear to have increased their rate of degradation during the eclipse season.
Goldhammer, L. J.↗
Comparing Constant and Transient Membrane Transport Parameters for Use in Wave Desalination Models
Directly pressurizing seawater for desalination with reverse osmosis membranes via wave motion is a promising and sustainable method for producing freshwater in coastal regions. However, such a system could result in significant pressure fluctuations and a departure from conventional steady-state desalination operations. This study sought to assess if membrane transport parameters (apparent water and salt permeability) should be modeled as transient or constant in solution–diffusion-based modeling efforts of dynamically operated desalination systems, such as those coupled to wave power. Two approaches were used to model membrane transport parameters: one considered each parameter to be a function of the net driving pressure of the system, and the other assumed they were constant across all conditions. A pilot-scale system was used to conduct steady-state and controlled ramping experiments. Data from steady-state experiments were used to calculate transient and constant transport parameters. Parameter combinations were used in a simulation model to predict water flux and effective permeate salinity, and simulation outcomes were compared against experimental ramping results. The transient relationships for both water and salt permeability produced the most accurate results for water flux and comparable results for effective permeate salinity. Development of such relationships would be unique to a specific system but could be valuable in modeling wave-driven desalination systems across the wide range of operating conditions they experience.
13 HYDRO ENERGY↗
Mariner Mars 1971 television picture catalog. Volume 2: Sequence design and picture coverage
A collection of data relating to the Mariner 9 TV picture is presented. The data are arranged to offer speedy identification of what took place during entire science cycles, on individual revolutions, and during individual science links or sequences. Summary tables present the nominal design for each of the major picture-taking cycles, along with the sequences actually taken on each revolution. These tables permit identification at a glance, all TV sequences and the corresponding individual pictures for the first 262 revolutions (primary mission). A list of TV pictures, categorized according to their latitude and longitude, is also provided. Orthographic and/or mercator plots for all pictures, along with pertinent numerical data for their center points are presented. Other tables and plots of interest are also included. This document is based upon data contained in the Supplementary Experiment Data Record (SEDR) files as of 21 August 1972.
Koskela, P. E.↗
Outlook for metal lasers
Lasers utilizing atomic metallic vapors are considered with emphasis on a double discharge technique and multiply pulsed experiments. Data are presented on the effect of time delay after the first electrical discharge and the effect of lasant temperature along with results of absorption measurements utilizing a 13 mm diameter laser tube. Data obtained from multiply pulsed experiments for discharge diameters varying from 1 to 4 cm indicate that the efficiency increases with the pulsing rate.
Russell, G. R.↗
MER Telemetry Processor
MERTELEMPROC processes telemetered data in data product format and generates Experiment Data Records (EDRs) for many instruments (HAZCAM, NAVCAM, PANCAM, microscopic imager, Moessbauer spectrometer, APXS, RAT, and EDLCAM) on the Mars Exploration Rover (MER). If the data is compressed, then MERTELEMPROC decompresses the data with an appropriate decompression algorithm. There are two compression algorithms (ICER and LOCO) used in MER. This program fulfills a MER specific need to generate Level 1 products within a 60-second time requirement. EDRs generated by this program are used by merinverter, marscahv, marsrad, and marsjplstereo to generate higher-level products for the mission operations. MERTELEPROC was the first GDS program to process the data product. Metadata of the data product is in XML format. The software allows user-configurable input parameters, per-product processing (not streambased processing), and fail-over is allowed if the leading image header is corrupted. It is used within the MER automated pipeline. MERTELEMPROC is part of the OPGS (Operational Product Generation Subsystem) automated pipeline, which analyzes images returned by in situ spacecraft and creates level 1 products to assist in operations, science, and outreach.
Lee, Hyun H.↗
Phoenix Telemetry Processor
Phxtelemproc is a C/C++ based telemetry processing program that processes SFDU telemetry packets from the Telemetry Data System (TDS). It generates Experiment Data Records (EDRs) for several instruments including surface stereo imager (SSI); robotic arm camera (RAC); robotic arm (RA); microscopy, electrochemistry, and conductivity analyzer (MECA); and the optical microscope (OM). It processes both uncompressed and compressed telemetry, and incorporates unique subroutines for the following compression algorithms: JPEG Arithmetic, JPEG Huffman, Rice, LUT3, RA, and SX4. This program was in the critical path for the daily command cycle of the Phoenix mission. The products generated by this program were part of the RA commanding process, as well as the SSI, RAC, OM, and MECA image and science analysis process. Its output products were used to advance science of the near polar regions of Mars, and were used to prove that water is found in abundance there. Phxtelemproc is part of the MIPL (Multi-mission Image Processing Laboratory) system. This software produced Level 1 products used to analyze images returned by in situ spacecraft. It ultimately assisted in operations, planning, commanding, science, and outreach.
Stanboli, Alice↗
Analysis of unswept and swept wing chordwise pressure data from an oscillating NACA 0012 airfoil experiment. Volume 2: Data report
The analysis of the chordwise load distribution and its sensitivity to the various system parameters represents the next phase of the overall study and is the subject of the present two volume report. The present volume is a compilation of all of the time history response data obtained during the test program previously described. The data have been tabulated in the form of Fourier coefficients for reasons of compactness and for ease by the user to reproduce the unsteady component of the individual pressures and the complete (unsteady plus steady state components) integrated load results. This data volume contains the individual pressure response time histories along the chord followed by the corresponding integrated load results. A further description of these data tables can be found in the text that follows.
St.hilaire, A. O.↗
The User Community and a Multi-Mission Data Project: Services, Experiences and Directions of the Space Physics Data Facility
From a user's perspective, the multi-mission data and orbit services of NASA's Space Physics Data Facility (SPDF) project offer a unique range of important data and services highly complementary to other services presently available or now evolving in the international heliophysics data environment. The VSP (Virtual Space Physics Observatory) service is an active portal to a wide range of distributed data sources. CDAWeb (Coordinate Data Analysis Web) enables plots, listings and file downloads for current data cross the boundaries of missions and instrument types (and now including data from THEMIS and STEREO). SSCWeb, Helioweb and our 3D Animated Orbit Viewer (TIPSOD) provide position data and query logic for most missions currently important to heliophysics science. OMNIWeb with its new extension to 1- and 5-minute resolution provides interplanetary parameters at the Earth's bow shock as a unique value-added data product. SPDF also maintains NASA's CDF (common Data Format) standard and a range of associated tools including translation services. These capabilities are all now available through webservices-based APIs as well as through our direct user interfaces. In this paper, we will demonstrate the latest data and capabilities now supported in these multi-mission services, review the lessons we continue to learn in what science users need and value in this class of services, and discuss out current thinking to the future role and appropriate focus of the SPDF effort in the evolving and increasingly distributed heliophysics data environment.
Fung, Shing F.↗
Data catalog of satellite experiments. Supplement no. 2D: Planetology
Spacecraft, experiment, and data sets are presented of lunar explorations. Apollo lunar surface experiments are listed and brief discriptions are included. Areas of data include: astronomy, meteorology, planetology, and solar physics.
Source record↗
Data for NASA's AVE 3 experiment: 25-mb sounding data and synoptic charts
The atmospheric variability experiment (AVE 3) is described and tabulated rawinsonde data at 25-mb intervals from the surface to 25 mb for the 41 stations is presented. The experiment was conducted between February 6 and February 7, 1975. Brief discussions are given on methods of data processing, changes in the reduction scheme since the AVE 2 pilot experiment, and data accuracy. An example of contact data is presented as well as synoptic charts prepared from the data.
Fuelberg, H. E.↗