Search NASA⌕ Search

SEARCH · Search NASA

Results for “FINALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

The final warming and polar vortex disappearance during the Southern Hemisphere spring

Seven years (1979-1985) of NMC data are used to analyze Southern Hemisphere middle stratosphere winter-to-summer circulation transitions. These transitions are classified into two extreme categories: (1) a mid-October final warming accompanied by a major mid-October wave event (1979 and 1982), and (2) a mid-November final warming with no strong October wave event (1980 and 1981). After the final warming a wave event in late November-early December results in the disappearance of the polar vortex. All of these wave events in conjunction with zonal mean mass motions act to reduce zonal mean gradients of potential vorticity and ozone through horizontal mixing, and hence they act to destroy the vortex and fill the ozone hole. Additionally, it is noted that the final warming and the vortex breakdown are two distinct events separated by 15-40 days. Finally, past studies show that the time of these events has not radically changed.

Newman, Paul A.↗

Diving Deeper: Exploring the Feasibility of Lowering Cassini’s Final Orbits

During the final five orbits of Cassini’s mission, the spacecraft will get closer to Saturn than it has ever been. These five orbits were designed to be as deep in the atmosphere as Cassini could safely fly; however, recent occultation data of Saturn’s atmosphere suggest that it is contracting. Given this contraction, the primary concern during these orbits has shifted from spacecraft health and safety to loss of science value. This paper explores a scenario for modifying the Cassini spacecraft’s trajectory, during these final orbits, such that it dips deeper into Saturn’s atmosphere. This scenario describes the method for in-situ detection of Saturn’s atmospheric state, the locations and sizes of maneuvers that would reduce the final periapsis altitudes, the effects of such maneuvers on the remaining trajectory, and the risks involved. The result is that a periapsis-lowering, “pop-down” maneuver is feasible during Cassini’s final orbits. Risk to the spacecraft is minimized by using the attitude control thrusters as density detectors during the first three atmospheric transits of the final five orbits. Should these transits reveal sufficiently low density and should sufficient propellant remain, then the Cassini project will consider performing the maneuver.

Sturm, Erick J., II↗

Slow-proton production in semi-inclusive deep inelastic scattering off the deuteron and complex nuclei: Hadronization and final-state interaction effects

The effects of the final-state interaction in slow-proton production in semi-inclusive deep inelastic scattering processes off nuclei, A(e,e{sup '}p)X, are investigated in detail using the spectator and target-fragmentation mechanisms. In the former mechanism, a hard interaction on a nucleon of a correlated pair leads, by recoil, to the emission of the partner nucleon, whereas in the latter mechanism a proton is produced when the diquark, which is formed right after the {gamma}*-quark interaction, captures a quark from the vacuum. Unlike previous papers on the subject, particular attention is paid to the effects of the final-state interaction of the hadronizing quark with the nuclear medium using an approach based on an effective time-dependent cross section that combines the soft and hard parts of hadronization dynamics in terms of the string model and perturbative QCD, respectively. It is shown that the final-state interaction of the hadronizing quark with the medium plays a relevant role in both deuterons and complex nuclei. Nonetheless, kinematical regions where final-state interaction effects are minimized can be selected experimentally, which would allow one to investigate the structure functions of nucleons embedded in the nuclear medium. Likewise, regions where the interaction of the struck hadronizing quark with the nuclear medium is maximized can be found, which would make it possible to study nonperturbative hadronization mechanisms.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Polarized 3 He target and Final State Interactions in SiDIS

Jefferson Lab is starting a wide experimental program aimed at studying the neutron’s structure, with a great emphasis on the extraction of the parton transverse-momentum distributions (TMDs). To this end, Semi-inclusive deep-inelastic scattering (SiDIS) experiments on polarized $^3$He will be carried out, providing, together with proton and deuteron data, a sound flavor decomposition of the TMDs. Here, given the expected high statistical accuracy, it is crucial to disentangle nuclear and partonic degrees of freedom to get an accurate theoretical description of both initial and final states. In this contribution, a preliminary study of the Final State Interaction (FSI) in the standard SiDIS, where a pion (or a Kaon) is detected in the final state is presented, in view of constructing a realistic description of the nuclear initial and final states.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Emulation of the calculations of final r -process abundance patterns with a neural network

This work explores the construction of a fast emulator for the calculation of the final pattern of nucleosynthesis in the rapid neutron capture process (the r-process). An emulator is built using a feed-forward artificial neural network (ANN). We train the ANN with nuclear data and relative abundance patterns. We take as input the β-decay half-lives and the one-neutron separation energy of the nuclei in the rare-earth region. The output is the final isotopic abundance pattern. In this work, we focus on the nuclear data and abundance patterns in the rare-earth region to reduce the dimension of the input and output space. We show that the ANN can capture the effect of the changes in the nuclear physics inputs on the final r-process abundance pattern in the adopted astrophysical conditions. We employ the deep ensemble method to quantify the prediction uncertainty of the neural network emulator. The emulator achieves a speed-up by a factor of about 20 000 in obtaining a final abundance pattern in the rare-earth region. The emulator may be utilized in statistical analyses such as uncertainty quantification, inverse problems, and sensitivity analysis.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Measurement of post-disruption runaway electron kinetic energy and pitch angle during final loss instability in DIII-D

Post-disruption runaway electron (RE) kinetic energy K and pitch angle sin$\vartheta$ are critical parameters for determining resulting first wall material damage during wall strikes, but are very challenging to measure experimentally. During the final loss instability, confined RE K and sin$\vartheta$ are reconstructed during center-post wall strikes for both high impurity (high-Z) and low impurity (low-Z) plasmas by combining soft x-ray, hard x-ray, synchrotron emission, and total radiated power measurements. Deconfined (wall impacting) RE sin$\vartheta$ is then reconstructed for these shots by using time-decay analysis of infra-red imaging. Additionally, deconfined RE K and sin$\vartheta$ are reconstructed for a low-Z downward loss shot by analyzing resulting damage to a sacrificial graphite dome limiter. The damage analysis uses multi-step modeling simulating plasma instability, RE loss orbits, energy deposition, and finally material expansion (MARS-F, KORC, GEANT-4, and finally COMSOL). Overall, mean kinetic energies are found to be in the range $\langle$$K$$\rangle$ $≈ 3-4$ MeV for confined REs. KORC simulations indicate that the final loss instability process does not change individual RE kinetic energy K. In conclusion, confined RE pitch angles are found to be fairly low initially pre-instability, $\langle$sin$\vartheta$$\rangle$ $≈ 0.1 – 0.2$, but appear to increase roughly 2x, to $\langle$sin$\vartheta$$\rangle$ $≈ 0.3 – 0.4$ for both confined and deconfined REs during instability onset in the low-Z case; this increase is not observed in the high-Z case.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Initial energy-momentum to final flow: A general framework for heavy-ion collisions

The evolution of a relativistic heavy-ion collision is typically understood as a process that transmutes the initial geometry of the system into the final momentum distribution of observed hadrons, which can be described via a cumulant expansion of the initial distribution of energy density and is represented at leading order as the well-known eccentricity scaling of anisotropic flow. We extend this framework to include the contribution from initial momentum-space properties, as encoded in other components of the energy-momentum tensor. Furthermore, we confirm the validity of the framework in state-of-the-art hydrodynamic simulations of large and small systems. With this framework, it is possible to separate the effects of early time dynamics from those of final-state evolution, even in the case when the distribution of energy does not fully determine subsequent evolution, as for example, in small systems. Specifically, we answer the question of when and how azimuthal correlations from the initial state survive to the final state. In very small systems such as 𝑝−𝑝, for example, initial momentum degrees of freedom dominate over energy. Thus, even if the system forms a quark-gluon plasma that is well described by hydrodynamics, the usual hydrodynamic picture of the transmutation of initial geometry to final momentum anisotropy is broken. Nevertheless, we show that the hydrodynamic response to the full energy-momentum tensor can be well understood in a similar manner as larger systems. Additionally, this framework elucidates the generic features of the system's evolution that are responsible for the impressive success of hydrodynamic simulations, but which may still hold even in cases where hydrodynamics is not applicable.

Relativistic heavy-ion collisions↗

Twist and teleportation analogy of the black hole final state

Mathematical connection between the quantum teleportation, the most unique feature of quantum information processing, and the black hole final state is studied taking into account the nontrivial spacetime geometry. We use the twist operation for the generalized entanglement measurement and the final-state boundary conditions to obtain transfer theorems for the black hole evaporation. This would enable us to put together the universal quantum teleportation and the black hole evaporation in the unified mathematical footing. For a renormalized post selected final state of outgoing Hawking radiation, we found that the information content, quantified by the mixedness of the state, is preserved only in the special case of the final-state boundary condition in the microcanonical form, which resembles a perfect teleportation channel.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Final mass and maximum spin of merged black holes and the golden black hole

We present results on the mass and spin of the final black hole from mergers of equal mass, spinning black holes. The study extends over a broad range of initial orbital configurations, from direct plunges to quasicircular inspirals to more energetic orbits (generalizations of Newtonian elliptical orbits). It provides a comprehensive search of those configurations that maximize the final spin of the remnant black hole. We estimate that the final spin can reach a maximum spin a/M{sub h{approx_equal}}0.99{+-}0.01 for extremal black hole mergers. In addition, we find that, as one increases the orbital angular momentum from small values, the mergers produce black holes with mass and spin parameters (Mh/M,a/Mh) spiraling around the values (M-circumflex{sub h}/M,a-circumflex/M{sub h}) of a golden black hole. Specifically, (M{sub h}-M-circumflex{sub h})/M{proportional_to}e{sup {+-}B{phi}c}os{phi} and (a-a-circumflex)/M{sub h{proportional_to}}e{sup {+-}C{phi}s}in{phi}, with {phi} a monotonically growing function of the initial orbital angular momentum. We find that the values of the parameters for the golden black hole are those of the final black hole obtained from the merger of a binary with the corresponding spinning black holes in a quasicircular inspiral.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

On-shell interference effects in Higgs boson final states

Top quark loops in Higgs production via gluon fusion at large invariant final state masses can induce important interference effects in searches for additional Higgs bosons as predicted in, e.g., Higgs portal scenarios and the minimal supersymmetric Standard Model when the heavy scalar is broad or the final state resolution is poor. Currently, the limit setting as performed by both ATLAS and CMS is based on injecting a heavy Higgs-like signal neglecting interference effects. In this study, we perform a study of such “on-shell” interference effects in pp → ZZ and find that they lead to a ≲O(30%) width scheme-dependent modification of the signal strength. Finally, including the continuum contributions to obtain, e.g., the full pp → ZZ → 4l final state, this modification is reduced to the 10% level in the considered intermediate mass range.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Importance of initial and final state effects for azimuthal correlations in p + Pb collisions

In this work, we investigate the relative importance of initial and final state effects on azimuthal correlations of gluons in low and high multiplicity p+Pb collisions. To achieve this, we couple Yang-Mills dynamics of pre-equilibrium gluon fields (IP-GLASMA) to a perturbative QCD based parton cascade for the final state evolution (BAMPS) on an event-by-event basis. We find that signatures of both the initial state correlations and final state interactions are seen in azimuthal correlation observables, such as v 2 {2PC} (p T ), their strength depending on the event multiplicity and transverse momentum. Initial state correlations dominate v 2 {2PC} (p T ) in low multiplicity events for transverse momenta p T > 2 GeV. Lastly, while final state interactions are dominant in high multiplicity events, initial state correlations affect v 2 {2PC} (p T ) for p T > 2 GeV as well as the pT integrated v 2 {2PC}.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Dark matter annihilation into four-body final states and implications for the AMS antiproton excess

Here we consider dark matter annihilation into a general set of final states of standard model particles, including two-body and four-body final states that result from the decay of intermediate states. For dark matter masses ~10 – 10 5 GeV, we use updated data from Planck and from high gamma-ray experiments such as Fermi-LAT, MAGIC, and VERITAS to constrain the annihilation cross section for each final state. The Planck constraints are the most stringent over the entire mass range for annihilation into light leptons, and the Fermi-LAT constraints are the most stringent for four-body final states up to masses ~10 4 GeV. We consider these constraints in light of the recent AMS antiproton results, and show that for light mediators it is possible to explain the AMS data with dark matter, and remain consistent with Fermi-LAT Inner Galaxy measurements, for m χ ~ 60 – 100 GeV mass dark matter and mediator masses m φ /m χ ≲ 1.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

ANSI/ASHRAE/IES Standard 90.1-2010 Final Determination Quantitative Analysis

The U.S. Department of Energy (DOE) conducted a final quantitative analysis to assess whether buildings constructed according to the requirements of the American National Standards Institute (ANSI)/American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)/Illuminating Engineering Society of North America (IESNA) Standard 90.1-2010 (ASHRAE Standard 90.1-2010, Standard 90.1-2010, or 2010 edition) would result in energy savings compared with buildings constructed to ANSI/ASHRAE/IESNA Standard 90.1-2007(ASHRAE Standard 90.1-2007, Standard 90.1-2007, or 2007 edition). The final analysis considered each of the 109 addenda to ASHRAE Standard 90.1-2007 that were included in ASHRAE Standard 90.1-2010. All 109 addenda processed by ASHRAE in the creation of Standard 90.1-2010 from Standard 90.1-2007 were reviewed by DOE, and their combined impact on a suite of 16 building prototype models in 15 ASHRAE climate zones was considered. Most addenda were deemed to have little quantifiable impact on building efficiency for the purpose of DOE's final determination. However, out of the 109 addenda, 34 were preliminarily determined to have a measureable and quantifiable impact. A suite of 240 computer energy simulations for building prototypes complying with ASHRAE 90.1-2007 was developed. These prototypes were then modified in accordance with these 34 addenda to create a second suite of corresponding building simulations reflecting the same buildings compliant with Standard 90.1-2010. The building simulations were conducted using the DOE EnergyPlus building simulation software. The resulting energy use from the complete suite of 480 simulation runs was then converted to energy use intensity (EUI, or energy use per unit floor area) metrics (Site EUI, Primary EUI, and energy cost intensity [ECI]) results for each simulation. For each edition of the standard, these EUIs were then aggregated to a national basis for each prototype using weighting factors based on construction floor area developed for each of the 15 U.S. climate zones using commercial construction data. When compared, the resulting weighted EUIs indicated that each of the 16 building prototypes used less energy under Standard 90.1-2010 than under Standard 90.1-2007 on a national basis when considering site energy, primary energy, or energy cost. The EUIs were also aggregated across building types to a national commercial building basis using the same weighting data. On a national basis, the final quantitative analysis estimated a floor-space-weighted national average reduction in new building energy consumption of 18.2 percent for source energy and 18.5 percent when considering site energy. An 18.2 percent savings in energy cost, based on national average commercial energy costs for electricity and natural gas, was also estimated.

03 NATURAL GAS↗

Final Report

This document constitutes the final report under DOE grant DE-FG-08ER64649. The organization of this document is as follows: first, I will review the original scope of the proposed research. Second, I will present the current draft of a paper nearing submission to Nature Climate Change on the initial results of this funded effort. Finally, I will present the last phase of the research under this grant which has supported a Ph.D. student. To that end, I will present the graduate student’s proposed research, a portion of which is completed and reflected in the paper nearing submission. This final work phase will be completed in the next 12 months. This final workphase will likely result in 1-2 additional publications and we consider the results (as exemplified by the current paper) high quality. The continuing results will acknowledge the funding provided by DOE grant DE-FG-08ER64649.

54 ENVIRONMENTAL SCIENCES↗

Advanced truck and bus radial materials for fuel efficiencies (Final Report)

PPG Industries, Inc. and Bridgestone Americas Tire Operations (BATO) propose to develop a novel surface-modified silica technology and demonstrate 4-6% improved fuel efficiency of Truck and Bus Radial (TBR) tires built from the technology. The proposed fuel efficiency increase will be achieved while maintaining or improving tear strength and tread wear. During rubber mixing, distributing silica in the rubber matrix is a challenge. This is because silica has a very polar surface, while rubbers have little polarity. It was hypothesized that surface treatments could cover part of the surface by hydrophobic groups, and reduce the surface polarity, thus helping to wet the silica with rubber during mixing and improving silica dispersion. During the project, the effect of different silica surface treatments on the surface energy of silica were determined, and related to the silica dispersion in rubber compounds. The results demonstrated that reducing the surface energy of silica samples improved dispersion in rubber compounds. Also, the preference for silica to migrate to the different phases in polymer blends was determined. The studies performed in binary polymer blends showed that carbon black has a preference to distribute in the different polymer phases in the order: SBR>BR~NR. Commercially available silica samples (treated and untreated) showed a preference in the order of SBR>NR>BR. Finally, the silica prototypes showed a preference in the order SBR=NR>BR. The knowledge gained regarding dispersion of treated silicas in rubber compounds was used to perform a series of studies to develop a silica – rubber compound combination with optimum performance for TBR treads. Initially, two silica prototypes (BXR-990 and BXR-991) were developed and used for a tire build at BATO’s tire plant in Warren County, TN. Results were evaluated and further silica and compound optimization was performed, prior to a final tire build. Manufacturing of the final silica prototype (BXR-1006) for the final tire build was performed at the PPG Silicas Pilot Plant in Monroeville, PA. Afterwards, experimental tires with silica-filled treads and control tires with carbon black-filled treads were built at BATO’s Warren County tire plant. The experimental TBR tires with silica-filled treads achieved the project goals for lab performance indicators, tread hardness and tear strength. The tires showed a 2.2% improvement in fuel efficiency compared to the control tires. While this improvement is lower than the 4% goal set initially, the improvement is significant and there are indicators that up to a 5% improvement in fuel efficiency could be achieved. This is supported by the confirmation of the validity of the fuel efficiency indicators made at the beginning of the project, and by the improvement in hysteresis and rolling resistance from tires built earlier in the project. The experimental tires produced using the BXR-990 silica prototype showed 47% improvement in tan δ at 60°C and 16% improvement in rolling resistance. Based on the results obtained, it is valid to estimate that the tires built with BXR-990 could provide around a 5% improvement in fuel efficiency, should we perform a fuel efficiency test. Tire wear for the experimental tires was 31% worse than for the control tires with the carbon black-filled tread compound. Other tools and further analysis of factors affecting wear are necessary to be evaluated to produce a silica tire with wear comparable to carbon black. Experimental and control tires were provided to the DOE for independent testing.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Gasoline Engine and Fuels Offering Reduced Fuel Consumption and Emissions: Vehicle Modeling Final Report

The Gasoline Engine and Fuels Offering Reduced Fuel Consumption and Emissions (GEFORCE) project was proposed in response to the U.S. Department of Energy’s Funding Opportunity Announcement 0991 by a team made up of the members of the Coordinating Research Council (CRC) and the research staff at Oak Ridge National Laboratory (ORNL.) The project focused on investigating the potential benefits that might be attained through synergistic use of specific engine technology together with fuels formulated to represent potential directions that high-octane fuels of the future might progress. A stated objective in the DOE FOA was to demonstrate a 25% reduction in petroleum consumption through optimization of the engine technologies together with a suitable fuel. An advanced engine was constructed and used with a matrix of research fuels to investigate potential avenues for efficiency improvement. The engine incorporated technologies expected to become mainstream for boosted engines in the next 10 to 20 years. These included increased compression ratio, a two-stage turbocharger, and cooled external exhaust gas recirculation (EGR). The fuel matrix was designed to investigate impacts from research octane number (RON), volumetric ethanol content, and the final boiling point of the fuel. The engine calibration was optimized for each fuel individually and data collected to enable vehicle system modelling that projected energy consumption, fuel economy, tailpipe CO₂ emissions, and impact on petroleum consumption for an industry-average mid-size sedan. The engine calibration and data collection were carried out at IAV in Michigan and is the subject of a separate report. IAV provided the engine data to Oak Ridge National Laboratory to support the vehicle modelling portion of the project. The vehicle modelling results show the following trends: Ethanol content does have a consistently strong influence on the fuel economy results for all cycles and all fuels. Among the fuels of a nominal RON level, increasing ethanol content consistently lowers fuel economy, with the 30% ethanol fuels always providing the lowest fuel economy for a given RON level. However, in some cases the energy consumption improvement allows the 30% ethanol fuels to match the fuel economy of the ethanol-free fuel P. These observations underscore the importance of both engine efficiency and fuel volumetric energy content on vehicle fuel economy.; There was no consistent trend in the projected energy consumption results for differences in fuel T90 for all fuels and cycles. Fuel economy projections did show a consistent trend, with the higher T90 fuel providing slightly greater fuel economy when compared to the low T90 fuel of the same ethanol content. The observed trends were consistent with differences in the heating value of the fuels.; The 102-RON fuels provided reduced energy consumption and greater fuel economy for the advanced engine on all drive cycles. The engine compression ratio of 11.5 was higher than would typically be used in a turbocharged engine when 92-RON fuel use is expected. Hence, the engine experiences more efficiency degradation from knock avoidance when using the 92-RON fuels. This degradation causes the fuel economy results for the 92-RON fuels to be lower than those for the 102-RON fuels.; Fuels E and F (92-RON, 30% ethanol) are projected to achieve 10% or greater reduction in petroleum consumption, with fuels K (102-RON, 30% ethanol) and O (97 RON, 30% ethanol) achieving greater than a 20% reduction. Fuel L (102-RON, 30% ethanol) achieves greater than 25% reduction, meeting the petroleum reduction target of the project. All of the fuels that achieve 10% or greater reduction in petroleum consumption are 30% ethanol blends.; Increasing final boiling point increased fuel economy at fixed ethanol content when the 102-RON fuels were used. This trend is a result of differences in the volumetric energy content of the fuels and the projected energy consumption values for the fuels. In the case of the 102-RON fuels, increasing final boiling point also resulted in an increase in the energy content of the fuel. There was not a consistent trend between the energy content and final boiling point for the 92-RON fuels at fixed ethanol content.

33 ADVANCED PROPULSION SYSTEMS↗

ANSI/ASHRAE/IES Standard 90.1-2010 Final Determination Quantitative Analysis

The U.S. Department of Energy (DOE) conducted a final quantitative analysis to assess whether buildings constructed according to the requirements of the American National Standards Institute (ANSI)/American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)/Illuminating Engineering Society (IES) Standard 90.1-2010 (ASHRAE Standard 90.1-2010, Standard 90.1-2010, or 2010 edition) would result in energy savings compared with buildings constructed to ANSI/ASHRAE/Illuminating Engineering Society of North America (IESNA) Standard 90.1- 2007(ASHRAE Standard 90.1-2007, Standard 90.1-2007, or 2007 edition). The final analysis considered each of the 109 addenda to ASHRAE Standard 90.1-2007 that were included in ASHRAE Standard 90.1- 2010. All 109 addenda processed by ASHRAE in the creation of Standard 90.1-2010 from Standard 90.1-2007 were reviewed by DOE, and their combined impact on a suite of 16 building prototype models in 15 ASHRAE climate zones was considered. Most addenda were deemed to have little quantifiable impact on building efficiency for the purpose of DOE’s final determination. However, out of the 109 addenda, 34 were preliminarily determined to have a measureable and quantifiable impact. A suite of 240 computer energy simulations for building prototypes complying with ASHRAE 90.1- 2007 was developed. These prototypes were then modified in accordance with these 34 addenda to create a second suite of corresponding building simulations reflecting the same buildings compliant with Standard 90.1-2010. The building simulations were conducted using the DOE EnergyPlus building simulation software. The resulting energy use from the complete suite of 480 simulation runs was then converted to energy use intensity (EUI, or energy use per unit floor area) metrics (Site EUI, Primary EUI, and energy cost intensity [ECI]) results for each simulation. For each edition of the standard, these EUIs were then aggregated to a national basis for each prototype using weighting factors based on construction floor area developed for each of the 15 U.S. climate zones using commercial construction data. When compared, the resulting weighted EUIs indicated that each of the 16 building prototypes used less energy under Standard 90.1-2010 than under Standard 90.1-2007 on a national basis when considering site energy, primary energy, or energy cost. The EUIs were also aggregated across building types to a national commercial building basis using the same weighting data. On a national basis, the final quantitative analysis estimated a floor-space-weighted national average reduction in new building energy consumption of 18.2 percent for source energy and 18.5 percent when considering site energy. An 18.2 percent savings in energy cost, based on national average commercial energy costs for electricity and natural gas, was also estimated.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Extreme Fast Charging Lithium-Ion Batteries (Final Technical Report)

The objective of this research project is to develop, design, fabricate, and demonstrate lithium ion battery cells that optimize energy density, reduce cost, and demonstrate eXtreme Fast Charging (XFC) capabilities. The XFC capability of the cell will be determined by the final specific energy of the cell after completing 500 6C charge /1C discharge cycles. Over the first 18 months of the project, over 800 cells were produced in groups of 20 cells to determine the optimum configuration of following parameters to optimized XFC performance: (1) Graphite anode material optimization (2) Electrolyte and additive optimization (3) Electrode and cell design optimization. In the final 6 months of the project, over 200 optimized cells were produced that featured optimized parameters from each of the independent studies. The final optimized cells exhibited a final specific energy of 150 Wh/kg, meeting the DOE project goal, but failing to meet the initial specific energy requirement of 180 Wh/kg.

25 ENERGY STORAGE↗