Search NASA⌕ Search

SEARCH · Search NASA

Results for “FLOW THEORY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Learning the structure of wind: A data-driven nonlocal turbulence model for the atmospheric boundary layer

In this work, we develop a novel data-driven approach to modeling the atmospheric boundary layer. This approach leads to a nonlocal, anisotropic synthetic turbulence model which we refer to as the deep rapid distortion (DRD) model. Our approach relies on an operator regression problem that characterizes the best fitting candidate in a general family of nonlocal covariance kernels parameterized in part by a neural network. This family of covariance kernels is expressed in Fourier space and is obtained from approximate solutions to the Navier–Stokes equations at very high Reynolds numbers. Each member of the family incorporates important physical properties such as mass conservation and a realistic energy cascade. The DRD model can be calibrated with noisy data from field experiments. After calibration, the model can be used to generate synthetic turbulent velocity fields. To this end, we provide a new numerical method based on domain decomposition which delivers scalable, memory-efficient turbulence generation with the DRD model as well as others. We demonstrate the robustness of our approach with both filtered and noisy data coming from the 1968 Air Force Cambridge Research Laboratory Kansas experiments. Using these data, we witness exceptional accuracy with the DRD model, especially when compared to the International Electrotechnical Commission standard.

17 WIND ENERGY↗
DOE OSTI2024

Self-similar Reynolds-averaged mechanical–scalar turbulence models for reshocked Richtmyer–Meshkov instability-induced mixing in the small Atwood number limit

Analytical self-similar solutions to two-, three-, and four-equation Reynolds-averaged mechanical–scalar turbulence models describing incompressible turbulent Richtmyer–Meshkov instability-induced mixing in planar geometry derived in the small Atwood number limit are extended to construct models for reshocked Richtmyer–Meshkov mixing. In this study, the models are based on the turbulent kinetic energy K and its dissipation rate ε, together with the scalar variance S and its dissipation rate χ modeled either differentially or algebraically. The three- and four-equation models allow for a simultaneous description of mechanical and scalar mixing, i.e., mixing layer growth and molecular mixing. Mixing layer growth parameters and other physical observables were obtained explicitly as functions of the model coefficients and were used to calibrate the model coefficients. Here, the solutions for the singly shocked Richtmyer–Meshkov case for the mixing layer width and the turbulent fields are used to construct piecewise-continuous generalizations of these quantities for times after reshock. For generality, the post-reshock mixing layer width is not assumed to grow with the same power-law as the pre-reshock width, and an impulsive approximation applied to Rayleigh–Taylor instability growth is used to establish the expression for the post-reshock width. A four-equation model is then used to illustrate the spatiotemporal behavior of the mean and turbulent fields and late-time turbulent equation budgets across the mixing layer. The reference solutions derived here can provide systematic calibrations and better understanding of mechanical–scalar turbulence models and their predictions for reshocked Richtmyer–Meshkov instability-induced turbulent mixing in the very large Reynolds number limit.

42 ENGINEERING↗
DOE OSTI2025

An Observational Evaluation of RKW Theory over the U.S. Southern Great Plains

The theory of Rotunno et al. (“RKW” theory) addresses the behavior of squall-line cold pools in vertically sheared flows. It predicts that, within a given thermodynamic environment, a balance between baroclinic vorticity generation by the cold pool and low-level environmental vertical wind shear induces an upright updraft along the gust front that maximizes the initiation of new convective cells. Although this theory has been evaluated numerically, its applicability to observed systems remains unclear and is limited by a lack of critical measurements, including high-frequency thermodynamic and wind profiles across the gust front. Herein, observations from the Atmospheric Radiation Measurement Southern Great Plains (ARM-SGP) observatory near Lamont, Oklahoma, are used to evaluate RKW theory for 10 well-observed squall lines over a 11-yr period. For this evaluation, RKW parameters including cold-pool intensity (c), low-level ambient, line-normal vertical shear (ΔV n ), subcloud and cloud-layer updraft tilts, and multiple measures of system intensity are estimated. Furthermore, the c estimates rely on thermodynamic retrievals from the Atmosphere Emitted Radiance Interferometer (AERI), which are uncertain but verify reasonably well against independent observations. As predicted by the theory, for c/ΔV n ≥ 1, c/ΔV n correlates positively with updraft tilt and negatively with system intensity, but these results are not always statistically significant and are also sensitive to the method by which ΔV n is evaluated. Specifically, ΔV n evaluations that extend above the cold-pool top yield greater consistency with RKW predictions. Also, some measures of intensity correlate more strongly with standard moist instability metrics than with RKW parameters.

Cold pools↗
DOE OSTI2021

T$ \overline{T} $ deformation in SCFTs and integrable supersymmetric theories

We calculate the \( \mathcal{S} \) -multiplets for two-dimensional Euclidean \( \mathcal{N} \) = (0 , 2) and \( \mathcal{N} \) = (2 , 2) superconformal field theories under the T \( \overline{T} \) deformation at leading order of perturbation theory in the deformation coupling. Then, from these \( \mathcal{N} \) = (0 , 2) deformed multiplets, we calculate two- and three-point correlators. We show the \( \mathcal{N} \) = (0 , 2) chiral ring’s elements do not flow under the T \( \overline{T} \) deformation. Specializing to integrable supersymmetric seed theories, such as \( \mathcal{N} \) = (2 , 2) Landau-Ginzburg models, we use the thermodynamic Bethe ansatz to study the S-matrices and ground state energies. From both an S-matrix perspective and Melzer’s folding prescription, we show that the deformed ground state energy obeys the inviscid Burgers’ equation. Finally, we show that several indices independent of D -term perturbations including the Witten index, Cecotti-Fendley-Intriligator-Vafa index and elliptic genus do not flow under the T \( \overline{T} \) deformation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Modeling q 95 windows for the suppression of edge localized modes by resonant magnetic perturbations in the DIII-D tokamak

A toroidal asymptotic matching model of the response of a tokamak plasma to a static resonant magnetic perturbation (RMP) is used to simulate the n = 3 RMP-induced edge-localized-mode-suppression windows in q 95 that are evident when the plasma current is slowly ramped in DIII-D discharge #145380. All quantities employed in the simulation are derived from experimental measurements, apart from the neutral particle data. Three cases are considered. In the first case, the natural frequencies of tearing modes resonant in the plasma are determined by the ion flows at the corresponding resonant surfaces, which is the prediction of nonlinear tearing mode theory. In the second case, the natural frequencies are determined by the local E x B velocities at the resonant surfaces. In the third case, the natural frequencies are determined by the electron flows at the resonant surfaces, which is the prediction of linear tearing mode theory. The second case gives the best agreement between the simulations and the experimental observations. The first and third cases only lead to partial agreement between the simulations and the observations. In the first case, the lack of complete agreement may be a consequence of using an inaccurate assumption for the neutral particle distribution in the pedestal. In the third case, the lack of complete agreement is probably due to the fact that the response of a tokamak plasma to an RMP is not accurately described by linear tearing mode theory.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Numerical and Analytical Modeling of Flow Partitioning in Partially Saturated Fracture Networks

Infiltration processes in fractured-porous media remain a crucial, yet not very well understood component of recharge and vulnerability assessment. Under partially-saturated conditions flows in fractures, percolating fracture networks, and fault zones contribute to the fastest spectrum of infiltration velocities via preferential pathways. Specifically, the partitioning dynamics at fracture intersections determine the magnitude of flow fragmentation into vertical and horizontal components and hence the bulk flow velocity and dispersion of fracture networks. In this work, we derive an approximate analytical solution for the partitioning process and validate it using smoothed particle hydrodynamics simulations. The developed transfer function is conceptually based on simulation results and laboratory experiments carried out in previous works. It allows to efficiently simulate flow through fracture networks with simple cubic structure and arbitrary number of fractures and aperture sizes via linear response theory and convolution of a given input signal. We derive a non-dimensional bulk flow velocity ($\widetilde{v}$) and dispersion coefficient ($\widetilde{D}$) to characterize fracture networks in terms of dimensionless horizontal and vertical time scales $\tau_m$ and $\tau_0$. The dispersion coefficient is shown to strongly depend on the horizontal time scale and converges towards a constant value of $0.08$ within reasonable fluid and geometrical parameter ranges, while the non-dimensional velocity exhibits a characteristic $\widetilde{v} \sim \tau_m^{-1/2}$ scaling. Given that hydraulic information is often only available at limited places within (fractured-porous) aquifer system, such as boreholes or springs, our study intends to provide a rudimentary analytical concept to potentially reconstruct internal fracture network geometries from external boundary information, e.g., the dispersive properties of discharge (groundwater level fluctuations).

42 ENGINEERING↗
DOE OSTI2021

A new and alternative look at nonlinear Alfvénic states

The formulation for studying nonlinear Alfvenic states, sustainable in Hall Magnetohydrodynamics (HMHD), becomes considerably simpler and more tractable when circularly polarized Beltrami vectors (the eigenstates of linear HMHD) are used as the basis functions. Nonlinear HMHD is, then, reduced to a rather simple looking set of scalar equations from which a model problem of three interacting Beltrami modes is formulated and analytically solved. The triplet interactions span a variety of familiar nonlinear processes leading to a redistribution as well as periodic exchange of energy. The energy exchange processes (whose strength is measured by an energy exchange/depletion time) will, perhaps, play a dominant role in determining the spectral content of an eventual Alfvenic state. All nonlinearities (sensitive functions of the interacting wave vectors) operate at par, and none is dominant over any substantial region of k-space; their intricate interplay prevents a “universal” picture from emerging; few generalizations on the processes that may, for instance, lead to a turbulent state, are possible. However, the theory can definitely claim: (1) the energy tends to flow from lower to higher k and (2) the higher k z (in the direction of the ambient magnetic field) components of a mode with a given k are depleted/oscillate faster—in some cases much faster. It is noteworthy that the mode coupling is the strongest (with the shortest depletion time) when the participating wave vectors are nearly perpendicular; perhaps, an expected consequence of the curl (cross product) nonlinearities. Numerical simulations will be necessary to help create a fully reliable picture.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Perturbation theory for the logarithm of a positive operator

In various contexts in mathematical physics, such as out-of-equilibrium physics and the asymptotic information theory of many-body quantum systems, one needs to compute the logarithm of a positive unbounded operator. Examples include the von Neumann entropy of a density matrix and the flow of operators with the modular Hamiltonian in the Tomita-Takesaki theory. Often, one encounters the situation where the operator under consideration, which we denote by ∆, can be related by a perturbative series to another operator ∆ 0 , whose logarithm is known. We set up a perturbation theory for the logarithm log ∆. It turns out that the terms in the series possess a remarkable algebraic structure, which enables us to write them in the form of nested commutators plus some “contact terms”.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Qubit Regularization of Quantum Field Theories

To study quantum field theories on a quantum computer, we must begin with Hamiltonians defined on a finite-dimensional Hilbert space and then take appropriate limits. This approach can be seen as a new type of regularization for quantum field theories, which we refer to as qubit regularization. A related finite-dimensional regularization, known as the D-theory approach, was proposed long ago as a general framework for all quantum field theories. In this framework, the dimensionality of the local Hilbert space at each spatial point can increase as needed through an additional flavor index. To reproduce asymptotically free QFTs, most studies assume that qubit-regularized theories require extending the local Hilbert space to infinity. However, contrary to this common belief, recent discoveries in (1+1) dimensions have revealed two examples where asymptotic freedom appears to emerge within a strictly finite-dimensional local Hilbert space through a novel renormalization group (RG) flow. These findings motivate further investigation into whether asymptotically free gauge theories could also emerge within a strictly finite-dimensional local Hilbert space. To support these explorations, we propose an orthonormal basis called the monomer-dimer-tensor-network (MDTN) basis and use it to construct new types of qubit-regularized lattice gauge theories.

Chandrasekharan, Shailesh [Duke Univ., Durham, NC ↗
DOE OSTI2023

Generalized filtered lifting line theory for arbitrary chord lengths and application to wind turbine blades

Abstract The filtered lifting line theory is an analytical approach used to solve the equations of flow subjected to body forces with a Gaussian distribution, such as used in the actuator line model. In the original formulation, the changes in chord length along the blade were assumed to be small. This assumption can lead to errors in the induced velocities predicted by the theory compared to full solutions of the equations. In this work, we revisit the original derivation and provide a more general formulation that can account for significant changes in chord along the blade. The revised formulation can be applied to wings with significant changes in chord along the span, such as wind turbine blades.

17 WIND ENERGY↗
DOE OSTI2022

Rheo-Structural Spectroscopy: Fingerprinting the In Situ Response of Fluids to Arbitrary Flow Fields

The objectives of this project were to develop new sample environments, measurement methodologies and associated modeling tools for characterizing the structural response to arbitrarily complex processing flows using small angle scattering, and to apply these new tools for understanding the fundamental physics governing the structuring of anisotropic particulate and polymeric materials under flow histories and conditions relevant to industrial processing flows. The research resulted in the development and implementation of a new sample environment, the fluidic four roll mill (FFoRM), for in situ small angle neutron and X-ray scattering (SANS/SAXS) measurements. These measurements are capable of generating large data sets that “fingerprint” how a complex fluid responds to a wide range of flow histories involving time variations in deformation type and rate. New modeling tools were developed to extract detailed microstructural information from such data sets, including orientation distribution functions and interparticle correlation functions, as well as reduced-order parametric descriptors of these high-dimensional functions that can be used to readily map, visualize and interpret a fluid’s structural response to its flow history. These new tools were applied to a range of model materials involving elongated particle suspensions in order to provide new insights into the physics of how flow couples with orientational and structural order in complex flows, particularly under non-dilute conditions for which no accurate theories currently exist. Using these investigations, we elucidated a number of new insights into the fundamental phenomena driving such process-structure-property relationships. These findings provide guidance for the further development of rheological models, and ultimately can inform the rational and model-based design of flow processes to achieve optimized orientational ordering that is key to the properties and function of a wide range of energy-relevant materials.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Advances and perspectives on mass transfer and enzymatic hydrolysis in the enzyme-mediated lignocellulosic biorefinery: A review

We report enzymatic hydrolysis is a critical process for the cellulase-mediated lignocellulosic biorefinery to produce sugar syrups that can be converted into a whole range of biofuels and biochemicals. Such a process operating at high-solid loadings (i.e., scarcely any free water or roughly ≥ 15% solids, w/w) is considered more economically feasible, as it can generate a high sugar concentration at low operation and capital costs. However, this approach remains restricted and incurs “high-solid effects”, ultimately causing the lower hydrolysis yields with increasing solid loadings. The lack of available water leads to a highly viscous system with impaired mixing that exhibits strong transfer resistance and reaction limitation imposed on enzyme action. Evidently, high-solid enzymatic hydrolysis involves multi-scale mass transfer and multi-phase enzyme reaction, and thus requires a synergistic perspective of transfer and biotransformation to assess the interactions among water, biomass components, and cellulase enzymes. Porous particle characteristics of biomass and its interface properties determine the water form and distribution state surrounding the particles, which are summarized in this review aiming to identify the water-driven multi-scale/multi-phase bioprocesses. Further aided by the cognition of rheological behavior of biomass slurry, solute transfer theories, and enzyme kinetics, the coupling effects of flow-transfer-reaction are revealed under high-solid conditions. Based on the above basic features, this review lucidly explains the causes of high-solid hydrolysis hindrances, highlights the mismatched issues between transfer and reaction, and more importantly, presents the advanced strategies for transfer and reaction enhancements from the viewpoint of process optimization, reactor design, as well as enzyme/auxiliary additive customization.

45 multi-scale, multi-phase, enzymatic reaction↗
DOE OSTI2023

Electrosynthesis of ethylene glycol from C 1 feedstocks in a flow electrolyzer

Ethylene glycol is a widely utilized commodity chemical, the production of which accounts for over 46 million tons of CO 2 emission annually. Here we report a paired electrocatalytic approach for ethylene glycol production from methanol. Carbon catalysts are effective in reducing formaldehyde into ethylene glycol with a 92% Faradaic efficiency, whereas Pt catalysts at the anode enable formaldehyde production through methanol partial oxidation with a 75% Faradaic efficiency. With a membrane-electrode assembly configuration, we show the feasibility of ethylene glycol electrosynthesis from methanol in a single electrolyzer. The electrolyzer operates a full cell voltage of 3.2 V at a current density of 100 mA cm -2 , with a 60% reduction in energy consumption. Further investigations, using operando flow electrolyzer mass spectroscopy, isotopic labeling, and density functional theory (DFT) calculations, indicate that the desorption of a *CH 2 OH intermediate is the crucial step in determining the selectively towards ethylene glycol over methanol.

09 BIOMASS FUELS↗
DOE OSTI2023

Measuring Galactic dark matter through unsupervised machine learning

ABSTRACT Measuring the density profile of dark matter in the Solar neighbourhood has important implications for both dark matter theory and experiment. In this work, we apply autoregressive flows to stars from a realistic simulation of a Milky Way-type galaxy to learn – in an unsupervised way – the stellar phase space density and its derivatives. With these as inputs, and under the assumption of dynamic equilibrium, the gravitational acceleration field and mass density can be calculated directly from the Boltzmann equation without the need to assume either cylindrical symmetry or specific functional forms for the galaxy’s mass density. We demonstrate our approach can accurately reconstruct the mass density and acceleration profiles of the simulated galaxy, even in the presence of Gaia-like errors in the kinematic measurements.

Astronomy & Astrophysics↗
DOE OSTI2023

Zonal flow excitation in electron-scale tokamak turbulence

Abstract The derivation of an intermediate-scale gyrokinetic-electron theory in nonuniform tokamak plasmas (Chen et al 2021 Nucl. Fusion 61 066017 ) has shown that a Navier–Stokes type nonlinearity couples electron-temperature-gradient (ETG) modes and zonal flow (ZF) modes with wavelengths much shorter than the ion gyroradius but much longer than the electron gyroradius. This intermediate-scale ETG-ZF coupling is typically stronger than the Hasegawa–Mima type nonlinearity characteristic of the fluid approximation and is predicted to lead to relevant ZF generation and ETG mode regulation. Electron-scale, continuum, gyrokinetic simulation results are presented here which include both single-mode ETG and full-spectrum ETG turbulence. The ZF generation due to single ETG modes is investigated and the single-mode intermediate-scale results are found to be in agreement with theory. The full-spectrum results are then presented and explained qualitatively in terms of the single-mode results. It is found that the ETG-driven ZFs regulate intermediate-scale electron heat flux transport to levels in the predicted range.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Wave-kinetic approach to zonal-flow dynamics: recent advances

Basic physics of drift-wave turbulence and zonal flows has long been studied within the framework of wave-kinetic theory. Recently, this framework has been re-examined from first principles, which has led to more accurate yet still tractable "improved" wave-kinetic equations. In particular, these equations reveal an important effect of the zonal-flow "curvature" (the second radial derivative of the flow velocity) on dynamics and stability of drift waves and zonal flows. We overview these recent findings and present a consolidated high-level picture of (mostly quasilinear) zonal-flow physics within reduced models of drift-wave turbulence.

fusion plasmas↗
DOE OSTI2020

<i>Finite Element Modeling of Biomass Hopper Flow</i>

The hopper is one of the widely used biomass handling devices that channels the bulk biomass from storage to the subsequent handling systems. Although Jenike's approach has been successfully used for hoppers handling grains and other agricultural produces for decades, designing a hopper, ensuring reliable biomass handling is found to be challenging. This study aims to address this engineering problem with alternative constitutive material models concerning the flow behavior of bulk solids. Finite element modeling is an approach that allows for implementing different material models. Underlying constitutive theories of different material models assist in investigating the mechanical behavior of a particulate system, including the flow characteristics of ground biomass. This study demonstrates hopper flow models of two types of biomass, i.e., ground corn stover and Douglas fir, with the Mohr-Coulomb model, which is based on Jenike's approach, modified Cam-Clay model, and Drucker-Prager/Cap model. The modeling results are compared with hopper flow experiments to highlights the advantages and shortfalls of each constitutive biomass flow model.

09 BIOMASS FUELS↗
DOE OSTI2026

Computing the Critical Temperature of the Affine-Transformed $D=3$ Ising Model Using Masked Autoregressive Flow

The simple Ising model provides a rich environment to build and study lattice field theories. As part of an ongoing project to construct a conformal field theory (CFT) on an arbitrarily curved manifold, in this work we develop methods to measure the critical temperature $β_c$ of the affine-transformed Ising model on the face-centered cubic (FCC) lattice. The main challenge in this endeavor is finding a computationally efficient and accurate method of interpolating and extrapolating Monte Carlo observables with respect to coupling coefficients and temperature. Herein, we compare two such methods. A traditional statistical approach uses the multiple histogram (MH) method, while a newer machine learning approach uses a masked autoregressive flow (MAF) to estimate the underlying probability density function of a set of observables. While the MH method is specifically designed to interpolate and extrapolate Monte Carlo observables, we find that MAF is a viable alternative for measuring $β_c$ with a computational cost that scales more favorably. Furthermore, we comment on additional advantages of MAF relevant to our work, such as extrapolating in system volume.

Svenson, Kai [Texas U.]↗