Search NASA⌕ Search

SEARCH · Search NASA

Results for “FUEL CONSUMPTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
NASA NTRS1953

Altitude Investigation of Several Afterburner Configurations for the J40-WE-8 Turbojet Engine

An investigation was conducted in the Lewis altitude wind tunnel to evaluate the performance and operational characteristics of the J40-WE-8 afterburner. A brief program of minor modifications to the flame holder, diffuser, and fuel system was undertaken to improve at a burner-inlet pressure level of 620 pounds per square foot. At this pressure level, modifications to the fuel system resulted in an increase in maximum net thrust from 1500 to 1600 pounds and a reduction in specific fuel consumption in the stoichiometric region from 3.70 to 3.15 pounds of fuel per hour per pound of net thrust. However, these fuel system modifications also resulted in buzzing combustion under certain operation conditions.

COMBUSTION - EFFECT OF ENGINE OPERATING CONDITIONS↗
NASA NTRS1998

The Recovery of TOMS-EP

On December 13th 1998, the Total Ozone Mapping Spectrometer - Earth Probe (TOMS-EP) spacecraft experienced a Single Event Upset which caused the system to reconfigure and enter a Safe Mode. This incident occurred two and a half years after the launch of the spacecraft which was designed for a two year life. A combination of factors, including changes in component behavior due to age and extended use, very unfortunate initial conditions and the safe mode processing logic prevented the spacecraft from entering its nominal long term storage mode. The spacecraft remained in a high fuel consumption mode designed for temporary use. By the time the onboard fuel was exhausted, the spacecraft was Sun pointing in a high rate flat spin. Although the uncontrolled spacecraft was initially in a power and thermal safe orientation, it would not stay in this state indefinitely due to a slow precession of its momentum vector. A recovery team was immediately assembled to determine if there was time to develop a method of despinning the vehicle and return it to normal science data collection. A three stage plan was developed that used the onboard magnetic torque rods as actuators. The first stage was designed to reduce the high spin rate to within the linear range of the gyros. The second stage transitioned the spacecraft from sun pointing to orbit reference pointing. The final stage returned the spacecraft to normal science operation. The entire recovery scenario was simulated with a wide range of initial conditions to establish the expected behavior. The recovery sequence was started on December 28th 1998 and completed by December 31st. TOMS-EP was successfully returned to science operations by the beginning of 1999. This paper describes the TOMS-EP Safe Mode design and the factors which led to the spacecraft anomaly and loss of fuel. The recovery and simulation efforts are described. Flight data are presented which show the performance of the spacecraft during its return to science. Finally, lessons learned are presented.

Robertson, Brent↗
NASA NTRS1976

Cost/benefit tradeoffs for reducing the energy consumption of the commercial air transportation system. Volume 2: Market and economic analyses

The impact of the most promising fuel conserving options on fuel consumption, passenger demand, operating costs, and airline profits when implemented into the U.S. domestic and international airline fleets is assessed. The potential fuel savings achievable in the U.S. scheduled air transportation system over the forecast period, 1973-1990, are estimated.

Vanabkoude, J. C.↗
NASA NTRS1992

Subsonic flight test evaluation of a performance seeking control algorithm on an F-15 airplane

The subsonic flight test evaluation phase of the NASA4 F-15 (powered by F100 engines) performance-seeking control program was completed for single-engine operation at part- and military-power settings. The subsonic performance-seeking control algorithm optimizes the quasi-steady-state performance of the propulsion system for three modes of operation: the minimum-fuel-flow mode, the minimum-temperature mode, and the maximum-thrust mode. Decreases in thrust-specific fuel consumption of 1 to 2 percent were measured in the minimum-fuel-flow mode; these fuel savings are significant especially for supersonic cruise aircraft. Decreases of up to approximately 100 R in fan turbine inlet temperature were measured in the minimum-temperature mode. Temperature reductions of this magnitude would more than double turbine life if inlet temperature was the only life factor. Measured thrust increases of up to approximately 15 percent in the maximum-thrust mode cause substantial increases in aircraft acceleration. The subsonic flight phase has validated the performance-seeking control technology which can significantly benefit the next generation of fighter and transport aircraft.

Gilyard, Glenn B.↗
NASA NTRSDate not supplied

Global Carbon Consumption Database for Wildland Fire

Fire significantly impacts both human-altered and wild landscapes on national and global scales. Though often devastating, wildland fires naturally reduce fuels, preventing larger wildfires. However, their smoke can harm human health locally and globally. To understand its impact on air quality and health, quantifying the emissions released into the atmosphere is crucial. To accurately model fire emissions, understanding fuel characteristics and burning conditions is crucial, as they vary with the fuelbed type and fire weather. For example, savanna fires have lower carbon loading and intensity but spread quickly, while boreal forest fires burn longer and release more carbon due to higher loading. Hotter, drier conditions increase fuel consumption and smoke plume height. Fire weather and available fuel are the key drivers of emissions.

Emily Gargulinski↗
NASA NTRS1977

Thermal barrier coating on high temperature industrial gas turbine engines

The thermal barrier coating used was a yttria stabilized zirconia material with a NiCrAlY undercoat, and the base engine used to establish improvements was the P&WA FT50A-4 industrial gas turbine engine. The design benefits of thermal barrier coatings include simplified cooling schemes and the use of conventional alloys in the engine hot section. Cooling flow reductions and improved heating rates achieved with thermal barrier coating result in improved performance. Economic benefits include reduced power production costs and reduced fuel consumption. Over the 30,000 hour life of the thermal barrier coated parts, fuel savings equivalent to $5 million are projected and specific power (megawatts/mass of engine airflow) improvements on the order of 13% are estimated.

Carlson, N.↗
NASA NTRS1984

Fuel conservative guidance concept for shipboard landing of powered-life aircraft

A simulation study was undertaken to investigate the application of energy conservative guidance (ECG) software, developed at NASA Ames Research Center, to improve the time and fuel efficiency of powered lift airplanes operating from aircraft carriers at sea. When a flightpath is indicated by a set of initial conditions for the aircraft and a set of positional waypoints with associated airspeeds, the ECG software synthesizes the necessary guidance commands to optimize fuel and time along the specified path. A major feature of the ECG system is the ability to synthesize a trajectory that will allow the aircraft to capture the specified path at any waypoint with the desired heading and airspeed from an arbitrary set of initial conditions. Five paths were identified and studied. These paths demonstrate the ECG system's ability to save flight time and fuel by more efficiently managing the aircraft's capabilities. Results of this simulation study show that when restrictions on the approach flightpath imposed for manual operation are removed completely, fuel consumption during the approach was reduced by as much as 49% (610 lb fuel) and the time required to fly the flightpath was reduced by as much as 41% (5 min). Savings due to ECG were produced by: (1) shortening the total flight time; (2) keeping the airspeed high as long as possible to minimize time spent flying in a regime in which more engine thrust is required for lift to aid the aerodynamic lift; (3) minimizing time spent flying at constant altitude at slow airspeeds; and (4) synthesizing a path from any location for a direct approach to landing without entering a holding pattern or other fixed approach path.

Warner, D. N., Jr.↗
NASA NTRS2005

Fuel-Cell-Powered Electric Motor Drive Analyzed for a Large Airplane

Because of its high efficiency, fuel cell technology may be used to launch a new generation of more-electric aeropropulsion and power systems for future aircraft. Electric-motor-driven airplanes using fuel-cell powerplants would be beneficial to the environment because of fuel savings, low noise, and zero carbon-dioxide emissions. In spite of the fuel cell s efficiency benefit, to produce the same shaft drive power, a fuel cell- powered electric-drive system must be definitely heavier than a turbine-drive system. However, the fuel-cell system s overall efficiency from fuel-to-shaft power is higher than for a turbine-drive system. This means that the fuel consumption rate could be lower than for a conventional system. For heavier, fuel-laden planes for longer flights, we might achieve substantial fuel savings. In the airplane industry, in fact, an efficiency gain of even a few percentage points can make a major economic difference in operating costs.

Brown, Gerald V.↗
NASA NTRS1977

Model for premixed turbulent flames

Flame speed and mean degree of reaction profiles are determined for an ensemble mean one-dimensional premixed turbulent flame. Elementary closure models are employed to treat turbulence closure problems arising from the nonlinear convective and chemical reaction rate terms in the time-dependent fuel conservation equation; a constant eddy diffusivity is useed to model correlation terms derived from the convective term. An expression developed for fuel consumption is solved to obtain the turbulent flame speed and the variation of mean fuel mass fraction across the flame. Comparison of the numerical analysis with experimental data indicates the importance of the quenching of the combustion reaction in high-wavenumber eddies.

Gouldin, F. C.↗
NASA NTRS1980

Improved components for engine fuel savings

The Engine Component Improvement (ECI) Project formulated to address near term improvements for current engines is described with emphasis on the development of component technologies to reduce the fuel consumption of CF6, JT9D, and JT8D engines. The technical and economical acceptability and the fuel saving potential of nine concepts are demonstrated. Descriptions of these concepts, results of testing, and the status as to entering airline service are presented. Also presented is the status of the remaining concepts still under development.

Antl, R. J.↗
NASA NTRS1981

Advanced subsonic transport propulsion

A brief review of the current NASA Energy Efficient Engine (E(3)) Project is presented. Included in this review are the factors that influenced the design of these turbofan engines and the advanced technology incorporated in them to reduce fuel consumption and improve environmental characteristics. In addition, factors such as the continuing spiral in fuel cost, that could influence future aircraft propulsion systems beyond those represented by the E(3) engines, are also discussed. Advanced technologies that will address these influencing factors and provide viable future propulsion systems are described. The potential importance of other propulsion system types, such as geared fans and turboshaft engines, is presented.

Nored, D. L.↗
NASA NTRS1981

Advanced subsonic transport propulsion

Examination of future subsonic commercial aircraft propulsion trends begins with a brief review of the current NASA Energy Efficient Engine (E3) Project. Included in this review are the factors that influenced the design of these turbofan engines and the advanced technology incorporated in them to reduce fuel consumption and improve environmental characteristics. In addition, factors such as the continuing spiral in fuel cost, that could influence future aircraft propulsion systems beyond those represented by the E3 engines, are also discussed. Advanced technologies that will address these influencing factors and provide viable future propulsion systems are described. And finally, the potential importance of other propulsion system types, such as geared fans and turboshaft engines, is presented.

Nored, D. L.↗
NASA NTRS1991

Simulation of extra-vehicular activity (EVA) self-rescue

Self-rescue during EVA is examined in terms of the use of a hand-held thruster that is similar to the hand-held maneuvering units HHMU developed for earlier programs. The problem of assessing velocity-increment requirements is addressed by means of examples of simulation technologies for studying EVA. The technologies evaluated include virtual reality systems such as the Virtual Interactive Environment Workstation (VIEW) and the Space Operations Simulator, and standard approaches like the air-bearing floor and the space shuttle. The VIEW is employed for a study of five trained NASA subjects that conduct a simulated return to a spacecraft with an HMMU under variable conditions. The study demonstrates the efficacy of VIEW for obtaining fuel-consumption values, and separation velocity is identified as the most significant determinant of the fuel and time requirements for a self-rescue operation.

Brody, Adam R.↗
NASA NTRS1992

Black carbon (soot) aerosol in the lower stratosphere and upper troposphere

As determined by impactor samplers flown on ER-2 and DC-8 aircraft, black carbon aerosol (BCA) mass loadings in the stratosphere average 0.6 nanograms per standard cubic meter, or 0.01 percent of the total aerosol. Upper tropospheric BCA increases to 0.3 percent. Low stratospheric concentration is commensurate with present commercial air traffic fuel consumption, given the following assumptions: the BCA emissions are 0.1 grams per kilogram of fuel consumed, 10 percent of route mileage is above the tropopause, and average BCA stratospheric residence time is about one year. Taking BCA into account, the stratospheric single scatter albedo is about 0.99. Using parameters for planned supersonic commercial aircraft, whose emissions will be predominantly in the stratosphere, it is shown that such traffic will double stratospheric BCA concentration. This would reduce the aerosol single scattering albedo by one percent, and double the BCA surface area that is available for heterogeneous chemistry.

Pueschel, R. F.↗
NASA NTRS1976

Study of the application of advanced technologies to laminar flow control systems for subsonic transports. Volume 1: Summary

A study was conducted to evaluate the technical and economic feasibility of applying laminar flow control to the wings and empennage of long-range subsonic transport aircraft compatible with initial operation in 1985. For a design mission range of 10,186 km (5500 n mi), advanced technology laminar-flow-control (LFC) and turbulent-flow (TF) aircraft were developed for both 200 and 400-passenger payloads, and compared on the basis of production costs, direct operating costs, and fuel efficiency. Parametric analyses were conducted to establish the optimum geometry for LFC and TF aircraft, advanced LFC system concepts and arrangements were evaluated, and configuration variations maximizing the effectiveness of LFC were developed. For the final LFC aircraft, analyses were conducted to define maintenance costs and procedures, manufacturing costs and procedures, and operational considerations peculiar to LFC aircraft. Compared to the corresponding advanced technology TF transports, the 200- and 400-passenger LFC aircraft realized reductions in fuel consumption up to 28.2%, reductions in direct operating costs up to 8.4%, and improvements in fuel efficiency, in ssm/lb of fuel, up to 39.4%. Compared to current commercial transports at the design range, the LFC study aircraft demonstrate improvements in fuel efficiency up to 131%. Research and technology requirements requisite to the development of LFC transport aircraft were identified.

Sturgeon, R. F.↗
NASA NTRS1978

Impact of future fuel properties on aircraft engines and fuel systems

The effect of modifications in hydrocarbon jet fuels specifications on engine performance, component durability and maintenance, and aircraft fuel system performance is discussed. Specific topics covered include: specific fuel consumption; ignition at relight limits; exhaust emissions; combustor liner temperatures; carbon deposition; gum formation in fuel nozzles, erosion and corrosion of turbine blades and vanes; deposits in fuel system heat exchangers; and pumpability and flowability of the fuel. Data that evaluate the ability of current technology aircraft to accept fuel specification changes are presented, and selected technological advances that can reduce the severity of the problems are described and discussed.

Rudey, R. A.↗
NASA NTRS1988

Systems Analysis Of Advanced Coal-Based Power Plants

Report presents appraisal of integrated coal-gasification/fuel-cell power plants. Based on study comparing fuel-cell technologies with each other and with coal-based alternatives and recommends most promising ones for research and development. Evaluates capital cost, cost of electricity, fuel consumption, and conformance with environmental standards. Analyzes sensitivity of cost of electricity to changes in fuel cost, to economic assumptions, and to level of technology. Recommends further evaluation of integrated coal-gasification/fuel-cell integrated coal-gasification/combined-cycle, and pulverized-coal-fired plants. Concludes with appendixes detailing plant-performance models, subsystem-performance parameters, performance goals, cost bases, plant-cost data sheets, and plant sensitivity to fuel-cell performance.

Ferrall, Joseph F.↗
NASA NTRS2001

Microgravity Diode Laser Spectroscopy Measurements in a Reacting Vortex Ring

The technique of Diode Laser Spectroscopy (DLS) with wavelength modulation is utilized to measure the concentration of methane in reacting vortex rings under microgravity conditions. From the measured concentration of methane, other major species such as water, carbon dioxide, nitrogen, and oxygen can be easily computed under the assumption of equilibrium chemistry with the method of Interactive Temperature with Assumed Chemistry (ITAC). The conserved scalar approach in modelling the coupling between fluid dynamics and combustion is utilized to represent the unknown variables in terms of the mixture fraction and scalar dissipation rate in conjunction with ITAC. Post-processing of the DLS measurements and the method of ITAC used in computing the species concentration are discussed. From the flame luminosity results, the increase in ring circulation appears to increase the fuel consumption rate inside the reacting vortex ring and the flame height for cases with similar fuel volumes. Preliminary results and application of ITAC show some potential capabilities of ITAC in DLS. The measured concentration of methane, and computed concentrations of water and carbon dioxide agree well with available results from numerical simulations.

Chen, Shin-Juh↗