Search NASA⌕ Search

SEARCH · Search NASA

Results for “Fermi level”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Enhanced electron transport in dye-sensitized solar cells using short ZnO nanotips on a rough metal anode.

Many efforts have been directed toward the enhancement of electron transport in dye-sensitized solar cells (DSSC) using one-dimensional nanoarchitectured semiconductors. However, the improvement resulting from these ordered 1-D nanostructured electrodes is often offset or diminished by the deterioration in other device parameters intrinsically associated with the use of these 1-D nanostructures, such as the two-sided effect of the length of the nanowires impacting the series resistance and roughness factor. In this work, we mitigate this problem by allocating part of the roughness factor to the collecting anode instead of imparting all the roughness factors onto the semiconductor layer attached to the anode. A microscopically rough Zn microtip array is used as an electron-collecting anode on which ZnO nanotips are grown to serve as the semiconductor component of the DSSC. For the same surface roughness factor, our Zn-microtip|ZnO-nanotip DSSC exhibits an enhanced fill factor compared with DSSCs that have ZnO nanowires supported by a planar anode. In addition, the open-circuit voltage of the Zn-microtip|ZnO-nanotip DSSC is also improved due to a favorable band shift at the Zn-ZnO interface, which raises the Fermi level of the semiconductor and consequently enlarges the energy gap between the quasi-Fermi level of ZnO and the redox species. With these improvements, the overall efficiency becomes 1.4% with an open-circuit voltage of 770 mV, while the surface roughness factor of ZnO is approximately 60. Electrochemical impedance spectroscopic study reveals that the electron collection time is much shorter than the electron lifetime, suggesting that fast electron collection occurs in our device due to the significantly reduced electron collection distance along the short ZnO nanotips. The overall improvement demonstrates a new approach to enhance the efficiency of dye-sensitized solar cells.

14 SOLAR ENERGY↗

Evolution of the photoresponse time of the GaAs/AlGaAs cyclotron resonance quantum Hall effect detector

The photoresponse time of the cyclotron resonance detector to terahertz radiation under integer quantum Hall effect conditions in the GaAs/AlGaAs heterostructure is shown to have a deep minimum at the Hall plateau center and two sharp maxima at the plateau edges. The minimum at the plateau center is associated with the fundamental property of vanishing of the random impurity potential screening under quantum Hall effect conditions. The decrease in the response time outside the plateau is related to the equilibrium population of the Landau level above (under) the Fermi level by electrons (holes), respectively, which increases the probability of photoexcited carrier recombination. It is shown that, under conditions of background radiation (300 K), relaxation times decrease by two orders of magnitude while retaining the characteristic magnetic field dependence.

36 MATERIALS SCIENCE↗

Electrofluorescence polarity in a molecular diode

The kinetic equations describing the transmission of an electron in the molecular compound “electrode 1–molecule–electrode 2” (1M2 system) are derived using the method of a nonequilibrium density matrix. The steady-state transmission regime is considered, for which detailed analysis of the kinetics of electrofluorescence formation in systems with symmetric and asymmetric couplings between the molecule and the electrodes is carried out. It is shown that the optically active state of the molecule is formed as a result of electron hops between the molecule and each of the electrodes, as well as due to inelastic interelectrode tunneling of the electron. The electrofluorescence power for a molecular diode (asymmetric 1M2 system) depends on the polarity of the voltage bias applied to the electrodes. The polarity is explained using a model in which the optically active part of the molecule (chromophore group) is represented by the highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO). Two mechanisms of the emergence of polarity are revealed. One mechanism is associated with nonidentical Stark shifts of the HOMO and LUMO levels relative to the Fermi levels of the electrodes. The second mechanism is associated with the fact that the rates of an electron hopping between HOMO (LUMO) and one of the electrodes are much higher than the rates of such a hopping with the other electrode. The conditions in which each mechanism can be implemented experimentally are indicated.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Atomic-scale structural and electronic properties of SrTiO 3 / GaAs interfaces: A combined STEM-EELS and first-principles study

The electronic properties of epitaxial oxide thin films grown on compound semiconductors are largely determined by the interfacial atomic structure, as well as the thermodynamic conditions during synthesis. Ferroelectric polarization and Fermi-level pinning in SrTiO 3 films have been attributed to the presence of oxygen vacancies at the oxide/semiconductor interface. Here, we present scanning transmission electron microscopy (STEM) and electron energy-loss spectroscopy analyses of GaAs films grown on SrTiO 3 combined with first-principles calculations to determine the atomic and electronic structures of the SrTiO 3 /GaAs interfaces. In this work, an atomically abrupt SrO/As interface is observed and the interfacial SrO layer is found to be O-deficient. First-principles density functional theory (DFT) calculations show SrO/Ga and Sr/As interfaces are favorable under O-rich and O-poor conditions, respectively. The SrO/Ga interface is reconstructed via the formation of Ga-Ga dimers while the Sr/As interface is abrupt and consistent with the experiment. DFT calculations further reveal that intrinsic two-dimensional electron gas (2DEG) forms in both SrO/Ga and Sr/As interfaces, and the Fermi level is pinned to the localized 2DEG states. Interfacial O vacancies can enhance the 2DEG density while it is possible for Ga/As vacancies to unpin the Fermi level from the 2DEG states.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Doping Effect on Ferromagnetic Arrangement and Electronic Structure of Cubic AlAs with Low Concentration of 3d (V, Cr, and Mn) Impurities

The doping effect of aluminum arsenide (AlAs) with 3d (TM = V, Cr, and Mn) of transition metal impurities gives new materials called diluted magnetic semiconductors, which have interesting electronic and magnetic properties for spintronics applications. We have used the full-potential linearized augmented plane wave (FP-LAPW) method to calculate the electronic band structures and magnetic properties of Al{sub 1−x}TM{sub x}As at low concentration x = 0.0625 of transition metal (TM = V, Cr, and Mn) atoms. We have found that the majority-spin states of Al{sub 0.9375}TM{sub 0.0625}As compounds are metallic due to large p-d hybridization between 3d levels of TM and the 4p levels of As around Fermi level, whereas the minority-spin states have semiconductor character. These compounds exhibit a half-metallic behavior with spin polarization of 100%, where the ferromagnetism is originated from double-exchange mechanism. Therefore, Al{sub 0.9375}TM{sub 0.0625}As (TM = V, Cr, and Mn) materials seem to be good candidates for spin injection in the field of spintronics applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structure, bonding, and magnetic response in two complex borides: Zr{sub 2}Fe{sub 1-{delta}}Ru{sub 5+{delta}}B2 and Zr{sub 2}Fe{sub 1-{delta}}(Ru{sub 1-x}Rh{sub x}){sub 5+{delta}}B2

Polycrystalline samples of two complex intermetallic borides Zr{sub 2}Fe{sub 1-{delta}}Ru{sub 5+{delta}}B2 and Zr{sub 2}Fe{sub 1-{delta}}(Ru{sub 1-x}Rh{sub x}){sub 5+{delta}}B2 ({delta}=ca. 0.10; x=0.20) were synthesized by high-temperature methods and characterized by single-crystal X-ray diffraction, energy dispersive spectroscopy, and magnetization measurements. Both structures are variants of Sc{sub 2}Fe(Ru{sub 1-x}Rh{sub x}){sub 5}B{sub 2} and crystallize in the space group P4/mbm (no. 127) with the Ti{sub 3}Co{sub 5}B{sub 2}-type structure. These structures contain single-atom, Fe-rich Fe/Ru or Fe/Ru/Rh chains along the c-axis with an interatomic metal-metal distance of 3.078(1) A, a feature which makes them viable for possible low-dimensional temperature-dependent magnetic behavior. Magnetization measurements indicated weak ferrimagnetic ordering with ordering temperatures ca. 230 K for both specimens. Tight-binding electronic structure calculations on a model 'Zr{sub 2}FeRu{sub 5}B{sub 2}' using LDA yielded a narrow peak at the Fermi level assigned to Fe-Fe antibonding interactions along the c-axis, a result that indicates an electronic instability toward ferromagnetic coupling along these chains. Spin-polarized calculations of various magnetic models were examined to identify possible magnetic ordering within and between the single-atom, Fe-rich chains. -- Graphical abstract: Zr{sub 2}FeRu{sub 5-x}Rh{sub x}B{sub 2} (x=0, 1) crystallizes with magnetic atoms forming chains which have been shown to order magnetically depending on the total valence electron count. Magnetic measurements and tight-binding electronic structure calculations are employed to investigate the ordering. Display Omitted

36 MATERIALS SCIENCE↗

Optical properties, structural parameters, and bonding of highly textured rocksalt tantalum nitride films

Tantalum nitride is an interesting solid with exceptional properties and it might be considered as a representative model system of the d{sup 3}s{sup 2} transition metal nitrides. In this work highly textured, stoichiometric, rocksalt TaN(111) films have been grown on Si(100) by pulsed laser deposition. The films were under a triaxial stress, which has been determined by the sin{sup 2} {psi} method. The stress-free lattice parameter was found to be 0.433{+-}0.001 nm, a value which has been also determined by ab initio calculations within the local spin density approximation. The optical properties of TaN have been studied using spectroscopic ellipsometry and detailed band structure calculations. The electron conductivity of TaN is due to the Ta 5dt{sub 2g} band that intercepts the Fermi level and is the source of intraband absorption. The plasma energies of fully dense rocksalt TaN were found to be 9.45 and 9.7 eV based on the experimental results and ab initio calculations, respectively. Additional optical absorption bands were also observed around 1.9 and 7.3 eV and attributed to be due to crystal field splitting of the Ta 5d band (t{sub 2g}{yields}e{sub g} transition) and the N p{yields}Ta d interband transition, respectively.

36 MATERIALS SCIENCE↗

Electrical properties and deep traps spectra of N-polar and Ga-polar AlGaN films grown by molecular beam epitaxy in a wide composition range

The polarity type, surface morphology, electrical properties, and deep trap spectra were studied for undoped Al{sub x}Ga{sub 1-x}N films (x=0-0.6) grown by molecular beam epitaxy on on-axis (0001) sapphire using composite buffers consisting of low temperature (LT) AlN nucleation layer, AlN, and AlN/AlGaN superlattice. It is shown that the films grow with N-polarity if the LT AlN layer is deposited under N-rich conditions and with Ga-polarity for the LT AlN layers deposited under Al-rich conditions. For both polarities the film morphology was acceptable for fabrication of typical GaN-based devices. It is demonstrated that the Ga-polar AlGaN films are heavily compensated p-type, with the dominant acceptors believed to be due to C. N-polar films are n type, with the residual donors pinning the Fermi level being most likely due to Si. N-polar films show a high concentration of deep electron traps.

36 MATERIALS SCIENCE↗

Interface characteristics of n-n and p-n Ge/SiC heterojunction diodes formed by molecular beam epitaxy deposition

In this article, we report on the physical and electrical nature of Ge/SiC heterojunction layers that have been formed by molecular beam epitaxy (MBE) deposition. Using x-ray diffraction, atomic force microscopy, and helium ion microscopy, we perform a thorough analysis of how MBE growth conditions affect the Ge layers. We observe the layers developing from independent islands at thicknesses of 100 nm to flat surfaces at 300 nm. The crystallinity and surface quality of the layer is shown to be affected by the deposition parameters and, using a high temperature deposition and a light dopant species, the layers produced have large polycrystals and hence a low resistance. The p-type and n-type layers, 300 nm thick are formed into Ge/SiC heterojunction mesa diodes and these are characterized electrically. The polycrystalline diodes display near ideal diode characteristics (n<1.05), low on resistance and good reverse characteristics. Current-voltage (I-V) measurements at varying temperature prove that all the layers have two-dimensional fluctuations in the Schottky barrier height (SBH) due to inhomogeneities at the heterojunction interface. Capacitance-voltage analysis and the SBH size extracted from I-V analysis suggest strongly that interface states are present at the surface causing Fermi-level pinning throughout the bands. A simple model is used to quantify the concentration of interface states at the surface.

36 MATERIALS SCIENCE↗

Influence of disorder on localization and density of states in amorphous carbon nitride thin films systems rich in {pi}-bonded carbon atoms

We discuss in this paper the evolution of both the density of states (DOS) located between the band-tail states and the DOS around the Fermi level N(E{sub F}) in amorphous carbon nitride films (a-CN{sub x}) as a function of the total nitrogen partial pressure ratio in the Ar/N{sub 2} plasma mixture. The films were deposited by three different deposition techniques and their microstructure was characterized using a combination of infrared and Raman spectroscopy and optical transmission experiments, completed with electrical conductivity measurements, as a function of temperature. The observed changes in the optoelectronic properties are attributed to the modification in the atomic bonding structures, which were induced by N incorporation, accompanied by an increase in the sp{sup 2} carbon bonding configurations and their relative disorder. The electrical conductivity variation was interpreted in terms of local effects on the nature and energy distribution of {pi} and {pi}* states.

36 MATERIALS SCIENCE↗

High-quality epitaxial CoFe/Si(111) heterostructures fabricated by low-temperature molecular beam epitaxy

We demonstrate atomically controlled heterojunctions consisting of ferromagnetic CoFe alloys and silicon (Si) using low-temperature molecular beam epitaxy with a good atomic matching at the (111) plane. The saturation magnetization of the CoFe layers grown reaches {approx}85% of the value of bulk samples reported so far, and can be systematically controlled by tuning the ratio of Co to Fe, indicating that the silicidation reactions between CoFe and Si are suppressed and the heterojunctions are very high quality. We find that the Schottky barrier height of the high-quality CoFe/Si(111) junctions is unexpectedly low compared to the previous data for other metal/Si ones, implying the reduction in the Fermi-level-pinning effect. We can expand the available high-quality ferromagnet/Si heterostructures in the field of Si-based spintronics.

36 MATERIALS SCIENCE↗

Influence of trimethylaluminum on the growth and properties of HfO{sub 2}/In{sub 0.53}Ga{sub 0.47}As interfaces

The growth and the electrical properties of HfO{sub 2}/In{sub 0.53}Ga{sub 0.47}As interfaces are characterized as a function of exposure to trimethylaluminum (TMA) prior to chemical beam deposition of HfO{sub 2} from an alkoxide precursor. It is shown that TMA can act as a surfactant for HfO{sub 2} growth for (2x4) but not for the group-III-rich (4x2) reconstructed surfaces. The Fermi-level can be unpinned by postdeposition forming gas anneals only for interfaces that were exposed to low doses of TMA at low temperatures. The results are discussed in the context of the interaction between TMA and III-V surfaces.

36 MATERIALS SCIENCE↗

Ohmic contact formation on n-type Ge by direct deposition of TiN

We succeeded in Ohmic contact formation on an n-Ge substrate by direct sputter deposition from a TiN target and subsequent postmetallization annealing (PMA) at 350 deg. C. The Schottky barrier heights of the TiN/n-Ge and TiN/p-Ge contacts were 0.18 eV and 0.50 eV, respectively, and were maintained up to a PMA temperature of 550 deg. C. These electrical characteristics are likely to be associated with an approximately 1-nm-thick interlayer formed at a TiN/Ge interface, which leads to the alleviation of the Fermi level pinning. We demonstrated the validity of the TiN/n-Ge contact using an n{sup +}/p junction, which showed an excellent ideal factor of n=1.01.

36 MATERIALS SCIENCE↗

Low interfacial trap density and sub-nm equivalent oxide thickness in In{sub 0.53}Ga{sub 0.47}As (001) metal-oxide-semiconductor devices using molecular beam deposited HfO{sub 2}/Al{sub 2}O{sub 3} as gate dielectrics

We investigated the passivation of In{sub 0.53}Ga{sub 0.47}As (001) surface by molecular beam epitaxy techniques. After growth of strained In{sub 0.53}Ga{sub 0.47}As on InP (001) substrate, HfO{sub 2}/Al{sub 2}O{sub 3} high-{kappa} oxide stacks have been deposited in-situ after surface reconstruction engineering. Excellent capacitance-voltage characteristics have been demonstrated along with low gate leakage currents. The interfacial density of states (D{sub it}) of the Al{sub 2}O{sub 3}/In{sub 0.53}Ga{sub 0.47}As interface have been revealed by conductance measurement, indicating a downward D{sub it} profile from the energy close to the valence band (medium 10{sup 12} cm{sup -2}eV{sup -1}) towards that close to the conduction band (10{sup 11} cm{sup -2}eV{sup -1}). The low D{sub it}'s are in good agreement with the high Fermi-level movement efficiency of greater than 80%. Moreover, excellent scalability of the HfO{sub 2} has been demonstrated as evidenced by the good dependence of capacitance oxide thickness on the HfO{sub 2} thickness (dielectric constant of HfO{sub 2}{approx}20) and the remained low D{sub it}'s due to the thin Al{sub 2}O{sub 3} passivation layer. The sample with HfO{sub 2} (3.4 nm)/Al{sub 2}O{sub 3} (1.2 nm) as the gate dielectrics has exhibited an equivalent oxide thickness of {approx}0.93 nm.

36 MATERIALS SCIENCE↗

The Protocol Of KFM Characterization On Cross-section Of CdS/CdTe Thin Film Solar Cell

In this work, we report a series of Kelvin Force Microscopy (KFM) measurements, suitable to observe the topography and the contact potential difference (CPD) distribution of the following stack: CdTe/CdS/ITO/glass. The sample is prepared by mechanical polishing after cleavage to decrease the roughness. In order to have a better understanding of the charge transport inside the solar cell and to vary the Fermi level pinning effect, different bias are applied to the sample. The CPD variations with different bias on cross-section in dark condition are presented. We observe the reverse bias widens the CdTe/CdS depletion region. Under illumination, electron and holes are generated near the interface and varies the CPD distribution. Additionally, the chemical composition of each layer has been investigated by nano-Auger electron spectroscopy (AES). We observe the interdiffusion at the CdTe/CdS interface and determine the composition of the active layers to be CdTe/CdS{sub 0.7}Te{sub 0.3}.

14 SOLAR ENERGY↗

Hard x-ray photoelectron spectroscopy study of Ge{sub 2}Sb{sub 2}Te{sub 5}; as-deposited amorphous, crystalline, and laser-reamorphized

We have investigated the electronic structure of as-deposited, crystalline, and laser-reamorphized Ge{sub 2}Sb{sub 2}Te{sub 5} using high resolution, hard x-ray photoemission spectroscopy. A shift in the Fermi level as well as a broadening of the spectral features in the valence band and the Ge 3d level between the amorphous and crystalline state is observed. Upon amorphization, Ge 3d and Sb 4d spectra show a surprisingly small breaking of resonant bonds and changes in the bonding character as evidenced by the very similar density of states in all cases.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of interlayer screening and temperature on dielectric functions of graphene by first-principles

The dielectric functions of few-layer graphene and the related temperature dependence are investigated from the atomic scale using first-principles calculations. Compared with ellipsometry experiments in the spectral range of 190–2500 nm, the normalized optical constants of mono-layer graphene demonstrate good agreement and further validate first-principles calculations. To interpret dielectric function of mono-layer graphene, the electronic band structure and density of states are analyzed. By comparing dielectric functions of mono-, bi-, and tri-layer graphene, it shows that interlayer screening strengthens intraband transition and greatly enhances the absorption peak located around 1 eV. The strengthened optical absorption is intrinsically caused by the increasing electron states near the Fermi level. To investigate temperature effect, the first-principles calculations and lattice dynamics are combined. The lattice vibration enhances parallel optical absorption peak around 1 eV and induces redshift. Moreover, it is observed that the van der Waals force plays a key role in keeping the interlayer distance stable during dynamics simulations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Mid-IR reflectance spectrum of multilayer graphene: Influence of adsorbate at the graphene – substrate interface

Water adsorbate at the interface between graphene and SiO{sub 2}/Si substrate is found to affect the reflectance spectra of (3 – 6)-layer graphene in the mid-IR range (λ = 2 – 16 μm). The sample under study was previously kept in acetone vapour to remove water adsorbate from the graphene – substrate interface. The graphene reflectance in the range of 8 – 16 μm tends to decrease with recovery of water adsorbate layer at the graphene – substrate interface at room temperature and relative air humidity RH = 40 % – 60 %. The observed effect is most likely caused by the blue shift of the absorption edge at interband transitions due to the change in the Fermi level position in the graphene valence band under the influence of the charge induced in graphene by the water adsorbate film. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗