Search NASA⌕ Search

SEARCH · Search NASA

Results for “GETTERING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Radioiodine sorbent selection criteria

Methods for preventing radioiodine from entering the environment are needed in processes related to nuclear energy and medical isotope production. The development and performance of many different types of sorbents to capture iodine have been reported on for decades; however, there is yet to be a concise overview on the important parameters that should be considered when selecting a material for chemically capturing radioiodine. This paper summarizes several criteria that should be considered when selecting candidate sorbents for implementation into real-world systems. The list of selection criteria discussed are 1) optimal capture performance, 2) kinetics of adsorption, 3) performance under relevant process conditions, 4) properties of the substrate that supports the getter, and 5) environmental stability and disposition pathways for iodine-loaded materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Sulfidation-Oxidation Behavior of FeCrAl and TiCrAl and the Third-Element Effect

Short-term sulfidation-oxidation exposures were conducted under high pS2 and low pO2 conditions for TiCrAl and FeCrAl alloys at 600 and 800 C. Low mass gains and submicron Al-rich oxide scales were formed on the TiCrAl, while high mass gains and FeS-based scale formation were observed for FeCrAl. Based on the good behavior of the TiCrAl, third-element effect additions of Cr are not inherently detrimental under sulfidation-oxidation conditions. Rather, differences in the mechanistic action of the third-element addition of Cr between FeCrAl and TiCrAl alloys and its relevance to low oxygen potential sulfidation-oxidation environments were the key factors in determining whether or not a protective alumina scale was established. For FeCrAl, no internal oxidation of Al was observed, which suggested that effects related to secondary gettering were not sufficient to yield protective Al2O3 formation in these environments. Rather, it was proposed that additional third-element effect benefits of Cr based on the existence of solid solutions among Al, Cr, and Fe oxides to mitigate rapid transient Fe-oxide formation were rendered ineffective because FeS formation was thermodynamically favored over Fe-oxide in the environment. In the case of TiCrAl, the stability of Ti-oxide in the sulfidation-oxidation environment and the non-classical third-element effects of Cr on promoting protective Al2O3 scale led to good corrosion resistance.

36 MATERIALS SCIENCE↗

Increasing the Upper Temperature Oxidation Limit of Alumina Forming Austenitic Stainless Steels in Air with Water Vapor

A family of alumina-forming austenitic (AFA) stainless steels is under development for use in aggressive oxidizing conditions from {approx}600-900 C. These alloys exhibit promising mechanical properties but oxidation resistance in air with water vapor environments is currently limited to {approx}800 C due to a transition from external protective alumina scale formation to internal oxidation of aluminum with increasing temperature. The oxidation behavior of a series of AFA alloys was systematically studied as a function of Cr, Si, Al, C, and B additions in an effort to provide a basis to increase the upper-temperature oxidation limit. Oxidation exposures were conducted in air with 10% water vapor environments from 800-1000 C, with post oxidation characterization of the 900 C exposed samples by electron probe microanalysis (EPMA), scanning and transmission electron microscopy, and photo-stimulated luminescence spectroscopy (PSLS). Increased levels of Al, C, and B additions were found to increase the upper-temperature oxidation limit in air with water vapor to between 950 and 1000 C. These findings are discussed in terms of alloy microstructure and possible gettering of hydrogen from water vapor at second phase carbide and boride precipitates.

08 HYDROGEN↗

Ductilization of Mo-Si solid solutions manufactured by powder metallurgy

Mo-1.5 at.% Si alloys with additions of either Y{sub 2}O{sub 3} or Zr were manufactured by mechanical alloying. The Y{sub 2}O{sub 3} particles reduced the grain size and increased the room temperature strength, but did not alleviate the brittleness of previously investigated Mo-1.5 at.% Si without Y{sub 2}O{sub 3}. Additions of Zr, on the other hand, resulted not only in a fine grain size and an extremely high bend strength ({approx}2 GPa), but also in limited bend ductility at room temperature. Zr additions are seen to be beneficial for three reasons. First, Zr reduces the grain size. Second, Zr getters detrimental oxygen by forming ZrO{sub 2} particles (which in turn help to pin the grain boundaries). Third, in situ Auger analysis shows that Zr reduces the concentration of Si segregated at the grain boundaries. This is thought to enhance the grain boundary cohesive strength and thus leads to the observed ductility.

36 MATERIALS SCIENCE↗

Interaction of coal-derived synthesis gas impurities with solid oxide fuel cell metallic components

Chromium-containing iron-based alloys Crofer22 APU and SS 441 and nickel-based alloy Inconel600, all commonly used in a solid oxide fuel cell (SOFC) stack as interconnect materials, heat exchanger and gas feeding pipes, were exposed at 700-850oC to a synthetic coal gas containing ≤2 ppm phosphine, arsine, sulfur and antimony. Samples were characterized by SEM/EDS and XRD to monitor the secondary phase formation. Exposure of ferritic stainless steels to P led to the formation of surface Cr-Mn-P-O and Fe-P-O compounds and increased temperatures accelerated the rate of interactions. Fewer interactions were observed after exposures to As and Sb. No sulfur containing compounds were found. Nickel-based alloy exhibited much stronger interactions with As and P in comparison with ferritic steels and the arsenic interactions were particularly strong. The difference between the iron- and nickel-based alloys is explained by the different chemistry and morphology of the scales grown on the alloy surfaces in coal gas. While P and As interactions with the metallic parts in the SOFC are likely to mitigate the nickel/zirconia anode poisoning, the other degradation mechanisms should be taken into consideration to avoid potential stack failures. Manganese spinels were found to be effective as phosphorus getters and could be used in coal gas cleanup.

01 COAL, LIGNITE, AND PEAT↗

Pyrophosphates AMoP2O7 (A = Li and Na): Synthesis, structure and electrochemical properties

Highlights: • Carbon-coated pyrophosphate materials AMoP2O7 (A = Li and Na) were prepared via freeze- drying method. • BVEL analysis revealed the remarkable difference in the alkali diffusion behaviors of two AMoP{sub 2}O{sub 7} polymorphs. • LiMoP{sub 2}O{sub 7} shows the superior electrochemical activity towards de/intercalation of Li{sup +} and Na{sup +} ions compared with NaMoP{sub 2}O{sub 7} - Abstract: The carbon-coated single-phase samples of the pyrophosphates AMoP{sub 2}O{sub 7} (A = Li and Na) were synthesized using freeze-drying followed by annealing in a sealed silica tube with the Fe/FeO getter. The Rietveld refinement of the X-Ray powder diffraction data proved both structures are built up as a network of corner-linked MoO{sub 6} octahedra and P{sub 2}O{sub 7} groups with A-cations located in the open tunnels running along the [100] (LiMoP{sub 2}O{sub 7}) and [101] (NaMoP{sub 2}O{sub 7}) directions. The bond valence energy landscapes (BVEL) analysis revealed three-dimensional pathways of alkali-ion migration with significantly different activation energies (0.8 eV for LiMoP{sub 2}O{sub 7} and 4.5 eV for NaMoP{sub 2}O{sub 7}) anticipating LiMoP{sub 2}O{sub 7} to exhibit faster Li{sup +} diffusion and better electrochemical characteristics. Both materials displayed electrochemical activity in Li- and Na-cells with reversible capacities of ∼20 mA h g{sup −1} for NaMoP{sub 2}O{sub 7} and more than 70 mA h g{sup −1} for LiMoP{sub 2}O{sub 7}, being in a good agreement with the BVEL results.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Radioactive iodine capture in silver-containing mordenites through nanoscale silver iodide formation.

The effective capture and storage of radiological iodine ({sup 129}I) remains a strong concern for safe nuclear waste storage and safe nuclear energy. Silver-containing mordenite (MOR) is a longstanding benchmark for iodine capture; however, the molecular level understanding of this process needed to develop more effective iodine getters has remained elusive. Here we probe the structure and distribution of iodine sorbed by silver-containing MOR using differential pair distribution function analysis. While iodine is distributed between {gamma}-AgI nanoparticles on the zeolite surface and subnanometer {alpha}-AgI clusters within the pores for reduced silver MOR, in the case of unreduced silver-exchanged MOR, iodine is exclusively confined to the pores as subnanometer {alpha}-AgI. Consequently, unreduced silver-containing zeolites may offer a more secure route for radioactive iodine capture, with the potential to more effectively trap the iodine for long-term storage.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Automotive SOI-BCD Technology Using Bonded Wafers

The SOI-BCD device is excelling in high temperature operation and noise immunity because the integrated elements can be electrically separated by dielectric isolation. We have promptly paid attention to this feature and have concentrated to develop SOI-BCD devices seeking to match the automotive requirement. In this paper, the feature technologies specialized for automotive SOI-BCD devices, such as buried N{sup +} layer for impurity gettering and noise shielding, LDMOS with improved ESD robustness, crystal defect-less process, and wafer direct bonding through the amorphous layer for intelligent power IC are introduced.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Iron distribution in silicon after solar cell processing: Synchrotron analysis and predictive modeling

The evolution during silicon solar cell processing of performance-limiting iron impurities is investigated with synchrotron-based x-ray fluorescence microscopy. We find that during industrial phosphorus diffusion, bulk precipitate dissolution is incomplete in wafers with high metal content, specifically ingot border material. Postdiffusion low-temperature annealing is not found to alter appreciably the size or spatial distribution of FeSi{sub 2} precipitates, although cell efficiency improves due to a decrease in iron interstitial concentration. Gettering simulations successfully model experiment results and suggest the efficacy of high- and low-temperature processing to reduce both precipitated and interstitial iron concentrations, respectively.

36 MATERIALS SCIENCE↗

Activation studies of NEG coatings by surface techniques

NEG (Non Evaporable Getters)materials in the form of ternary alloy coatings have many benefits compare to traditional bare surfaces such as Extreme high vacuum(XHV), lower secondary electron yield(SEY), low photon desorption cofficient. The extreme high vacuum (pressure > 10{sup -10} mbar) is very useful to the study of surfaces of the material, for high energy particle accelerators(LHC, Photon Factories), synchrotrons (ESRF, Ellectra) etc. Low secondary electron yield leads to better beam life time. In LHC the pressure in the interaction region of the two beams is something of the order of 10{sup -12} mbar. In this paper preparation of the coatings and their characterization to get the Activation temperature by using the surface techniques XPS, SEM and SIMS has been shown.

36 MATERIALS SCIENCE↗

Influence of n{sup +} and p{sup +} doping on the lattice sites of implanted Fe in Si

We report on the lattice location of implanted {sup 59}Fe in n{sup +}- and p{sup +}-type Si by means of emission channeling. We found clear evidence that the preferred lattice location of Fe changes with the doping of the material. While in n{sup +}-type Si Fe prefers displaced bond-centered (BC) sites for annealing temperatures up to 600 °C, changing to ideal substitutional sites above 700 °C, in p{sup +}-type Si, Fe prefers to be in displaced tetrahedral interstitial positions after all annealing steps. The dominant lattice sites of Fe in n{sup +}-type Si therefore seem to be well characterized for all annealing temperatures by the incorporation of Fe into vacancy-related complexes, either into single vacancies which leads to Fe on ideal substitutional sites, or multiple vacancies, which leads to its incorporation near BC sites. In contrast, in p{sup +}-type Si, the major fraction of Fe is clearly interstitial (near-T or ideal T) for all annealing temperatures. The formation and possible lattice sites of Fe in FeB pairs in p{sup +}-Si are discussed. We also address the relevance of our findings for the understanding of the gettering effects caused by radiation damage or P-diffusion, the latter involving n{sup +}-doped regions.

36 MATERIALS SCIENCE↗

Fundamental studies on the Cs dynamics under ion source conditions

The performance of surface conversion based negative hydrogen ion sources is mainly determined by the caesium dynamics. Therefore, fundamental investigations in vacuum and plasma are performed at a flexible laboratory setup with ion source parameters. Studies on the influence of Cs on the plasma parameters of H{sub 2} and D{sub 2} plasmas showed that n{sub e} and T{sub e} in the bulk plasma are not affected by relevant amounts of Cs and no isotopic differences could be observed. The coating of the vessel surfaces with Cs, however, leads to a considerable gettering of hydrogen atoms from the plasma volume and to the decrease of n{sub e} close to a sample surface due to the formation of negative ions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

On the doping limit for strain stability retention in phosphorus doped Si:C

Strain stability of phosphorus doped pseudomorphically strained Si:C alloy is investigated via high-resolution X-ray diffractometry, Fourier transform infrared spectroscopy, and Hall measurement. Significant strain relaxations are found under post-annealing treatment far below β-SiC precipitation threshold temperature, especially for the highest phosphorus doped case. Most of the substitutional carbon is retained and no further β-SiC formation can be found for all samples investigated. Volume compensation through gettering of interstitial atoms around substitutional carbon is considered as a probable mechanism for the observed strain relaxation. The strain relaxation effect can be further reduced with HF treatment prior to post-annealing process. We found an upper limit for ion implant dose (<1 × 10{sup 14} atom/cm{sup 2}) for the retention of strain stability in phosphorus doped Si:C.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Hydrogen passivation of interstitial iron in boron-doped multicrystalline silicon during annealing

Effective hydrogenation of interstitial iron in boron-doped multicrystalline silicon wafers is reported. The multicrystalline silicon wafers were annealed with plasma-enhanced chemical vapour deposited silicon nitride films, at temperatures of 400 °C – 900 °C and for times from minutes to hours. At low temperatures where a combined effect of hydrogenation and precipitation of dissolved Fe is expected, results show that the hydrogenation process dominates the effect of precipitation. The concentrations of dissolved interstitial iron reduce by more than 90% after a 30-min anneal at temperatures between 600 and 900 °C. The most effective reduction occurs at 700 °C, where 99% of the initial dissolved iron is hydrogenated after 30 min. The results show that the observed reductions in interstitial Fe concentrations are not caused by the internal gettering of Fe at structural defects or by an enhanced diffusivity of Fe due to the presence of hydrogen. The hydrogenation process is conjectured to be the pairing of positively charged iron with negatively charged hydrogen, forming less recombination active Fe-H complexes in silicon.

36 MATERIALS SCIENCE↗

Evolution of iron-containing defects during processing of Si solar cells

The formation of iron-containing defects was studied during the fabrication process of a Si solar cell. Three Cz-Si crystals with different iron content in the feedstock were grown for the study. Iron-containing defects in and near-to the n{sup +}p-junction volume (NJV) of the cells are formed directly after phosphorus diffusion due to an inflow of iron atoms from the dissolving iron-silicide precipitates. These NJV-defects strongly affect the dark saturation current of the junctions. Partial dissolution or gettering of the NJV-defects during formation of the antireflection coating is accompanied by an increase in defect concentrations in the bulk of the cell. Further deterioration of bulk carrier lifetime during the formation of electrical contacts is related to the partial dissolution of remaining iron-silicide precipitates during the firing process. A general description of the defect evolution in iron-contaminated wafers during solar cell processing is presented and possible strategies for reducing the influence of iron-containing defects are proposed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Upgraded metallurgical-grade silicon solar cells with efficiency above 20%

We present solar cells fabricated with n-type Czochralski–silicon wafers grown with strongly compensated 100% upgraded metallurgical-grade feedstock, with efficiencies above 20%. The cells have a passivated boron-diffused front surface, and a rear locally phosphorus-diffused structure fabricated using an etch-back process. The local heavy phosphorus diffusion on the rear helps to maintain a high bulk lifetime in the substrates via phosphorus gettering, whilst also reducing recombination under the rear-side metal contacts. The independently measured results yield a peak efficiency of 20.9% for the best upgraded metallurgical-grade silicon cell and 21.9% for a control device made with electronic-grade float-zone silicon. The presence of boron-oxygen related defects in the cells is also investigated, and we confirm that these defects can be partially deactivated permanently by annealing under illumination.

36 MATERIALS SCIENCE↗

Versatile semi-batch apparatus for manometric measurement of gas–solid reaction rates

In this study, we describe the design, construction, operation, and performance of a simple and versatile semi-batch reactor that is especially useful for measurement of gas/solid reaction rates at pressures in the range of 1 mTorr to 1500 Torr. The reactor operates by repeatedly imposing small AC modulations of reactant gas pressure on top of a much larger DC pressure background. Based on the rate of pressure relaxation following each AC pulse, the reaction rate is determined. Our design is characterized by modular construction from off-the-shelf, ultra-high-vacuum-compatible components, which facilitate easy retrofitting and adaptation to a range of experimental conditions. Automated experiment control and data acquisition is accomplished via a custom National Instruments © LabView virtual instrument. Data analysis is automated using a custom series of Mathworks © Matlab scripts. We demonstrate reactor performance through measurements of hydrogenation kinetics for a composite H 2 getter material consisting of 1,4-bis(phenylethynyl)benzene mixed with a palladium/carbon catalyst.

47 OTHER INSTRUMENTATION↗

A simple, high-yield, apparatus for NEG coating of vacuum beamline elements

Non-Evaporable Getter (NEG) materials are extremely useful in vacuum systems for achieving Ultra High Vacuum. Recently, these materials have been used to coat the inner surfaces of vacuum components, acting as an internal, passive, vacuum pump. We have constructed a low cost apparatus, which allows coating of very small diameter vacuum tubes, used as differential pumping stages. Despite the relative ease of construction, we are routinely able to achieve high coating yields. We further describe an improvement to our system, which is able to achieve the same yield, at an even lower complexity by using an easily manufactured permanent magnet arrangement. The designs described are extendible to virtually any combination of length and diameter of the components to be coated.

42 ENGINEERING↗