SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Heaterless inert gas ion thruster hollow cathodes were investigated with the aim of reducing ion thruster complexity and increasing ion thruster reliability. Cathodes heated by glow discharges are evaluated for power requirements, flowrate requirements, and life limiting mechanisms. An accelerated cyclic life test is presented.
A rapid start hollow cathode has been developed for high power ion thruster application. Using no low work function insert or heater, the Field Enhanced Refractory Metal (FERM) cathode electron emission occurs from a refractory metal tube concentric with the cathode barrel. Results are presented for FERM cathode operation in the high field strength Test Bed Ion Engine. Using a controlled glow discharge heating technique, cathode start up times of 1-2 secs are shown. Cathode V-I curves up to 35 ampere emission are presented and life limiting component erosion mechanisms, at these high current levels, are discussed.
The presence of mode-mode coupling in turbulent fluctuations in the positive column of a glow discharge in argon is studied experimentally and analytically. The auto-power spectra, the cross power spectra, the phase spectra, the cross correlation functions and the bispectrum are determined. The results are relevant to the theoretical speculations of Grabec and Mikac (1974) and it is shown that ionization instability is the primary cause of the turbulence. The phase spectra indicate that the system is nearly linear at low frequency and the bispectrum plots show that nonlinear wave-wave interactions play a role in the development of the fluctuation components in the turbulent spectrum. Distinctions are made between the azimuthal and axial behaviors of the fluctuations and the results imply a trend toward longer azimuthal scales and shorter axial scales for characterizing fluctuation wave-packets as the density of the turbulent environment increases.
The nonlinear interactions of fluctuating components which produce noise in supersonic jet flows were studied experimentally. Attention was given to spectral components interactions and the spectral effects of increasing Re. A jet exhausted in perfectly expanded conditions was monitored by microphones in the maximum noise emission direction. Trials were run at Mach 1.4 and 2.1 and the Re was varied from 5000-20,000 and 9000-25,000, respectively. Hot-wire data were gathered to examine the mode-mode interactions and a point glow discharge was used to excite the jets. The noise was found to exhibit discrete frequency components and a single tone instability at Re below 10,000. Mode interactions were found to weaken after the instabilities reached a crescendo and then decayed, leading to a nonlinear spectral broadening effect.
The molecular ion H3O(+) is predicted to be an important component of the gas phase of interstellar clouds where it is calculated to be one of the most abundant molecular ions. Its detection would provide an indirect method of determining the abundance of the crucial species H2O. This fundamental molecule has no convenient low-lying transitions in the microwave or millimeter regions of the spectrum which can be excited under the normal low temperature conditions present in the interstellar medium. It is believed that the P(2,1) transition of H3O(+) in absorption at a frequency of 307 192.41 (5) MHz has been detected. The H3O(+) ion was produced in a magnetically enhanced negative glow discharge source.
Millimeter-wave lines of the C3H radical, including six of the lines observed in space, were detected in a laboratory glow discharge through a flowing mixture of C2H2, He, and CO. Each of the 10 rotational transitions measured, five between 98 and 185 GHz in the 2Pi1/2 ladder and five between 80 and 194 GHz in the 2Pi3/2 ladder, is split by lambda-type doubling, and all but three possess resolved hyperfine structure. The excellent agreement between the fine-structure, rotation, lambda-doubling, and hyperfine constants derived from the laboratory data and from the astronomical observations conclusively confirms the identifications in IRC +10216 and TMC-1 by Thaddeus and colleagues (1985). An accurate set of spectroscopic constants, which allow calculation of the entire radio spectrum of C3H to a radial velocity of 0.1 km/s, was derived from a simulataneous fit to the laboratory frequencies and to the well-resolved hfs observed in the narrow-line astronomical source TMC-1.
Ion plating is ion-assisted or glow-discharge surface-deposition technique. In this process, ions or energetic atoms transfer energy, momentum, and charge to substrate and deposited surface film. Process controlled to modify physical characteristics of surface, subsurface chemical conditions, and surface and subsurface microstructures as well. Ion plating with such soft, thin metallic films as gold, silver, or lead has great potential for producing self-contained lubricating surfaces. Such films reduce friction, wear, and corrosion on sliding or rotating mechanical surfaces used in wide range of environments.
The amorphous dielectrics a-C:H and BN were deposited on III-V semiconductors. Optical band gaps as high as 3 eV were measured for a-C:H generated by C4H10 plasmas; a comparison was made with bad gaps obtained from films prepared by CH4 glow discharges. The ion beam deposited BN films exhibited amorphous behavior with band gaps on the order of 5 eV. Film compositions were studied by Auger electron spectroscopy (AES), x-ray photoelectron spectroscopy (XPS) and secondary ion mass spectrometry (SIMS). The optical properties were characterized by ellipsometry, UV/VIS absorption, and IR reflection and transmission. Etching rates of a-C:H subjected to O2 dicharges were determined.
Two rotational transitions of CCD, N = 1-2 at 144 GHz and 2-3 at 216 GHz, were detected in a laboratory glow discharge through deuterated acetylene and helium, after which one, N = 2-1, was detected toward the rich molecular cloud behind the Orion Nebula. The 144 GHz transition is a well-resolved spin doublet split by 55 MHz, the components of which contain hyperfine structure of the order of 1 MHz, so far only partially resolved. From observations toward two positions in Orion, at and near the Kleinmann-Low nebula, the column density of CCD is determined to be 1.8 x 10 to the 13th/sq cm and the isotopic ratio CCD/CCH = 0.05. CCD was not detected at two positions in TMC-1.
Low Cr steels AISI 41410, AISI 4340, and high Cr austenitic stainless steels AISI 304, AISI 316 were ion nitrided in a dc glow discharge plasma consisting of a 75 percent H2 - 25 percent N2 mixture. Surface compound layer phases were identified, and compound layer microhardness and diffusion zone microhardness profiles were established. Distinct differences in surface compound layer hardness and diffusion zone profiles were determined between the low and high Cr alloy steels. The high Cr stainless steels after ion nitriding displayed a hard compound layer and an abrupt diffusion zone. The compound layers of the high Cr stainless steels had a columnar structure which accounts for brittleness when layers are exposed to contact stresses. The ion nitrided surfaces of high and low Cr steels displayed a low coefficient of friction with respect to the untreated surfaces when examined in a pin and disk tribotester.
Heaterless inert gas ion thruster hollow cathodes were investigated with the aim of reducing ion thruster complexity and increasing ion thruster reliability. Cathodes heated by glow discharges are evaluated for power requirements, flowrate requirements, and life limiting mechanisms. An accelerated cyclic life test is presented.
The glow discharge energizing favorably modifies and controls the coating/substrate adherence and the nucleation and growth sequence of ion plated gold films. As a result the adherence, coherence, internal stresses, and morphology of the films are significantly improved. Gold ion plated films because of their graded coating/substrate interface and fine uniform densely packed microstructure not only improve the tribological properties but also induce a surface strengthening effect which improves the mechanical properties such as yield, tensile, and fatigue strength. Consequently significant improvements in the tribological performance of ion plated gold films as compared to vapor deposited gold films are shown in terms of decreased friction/wear and prolonged endurance life.
Thin films of the following polymers were exposed at ambient temperature to ground-state oxygen atoms (O(3P)), generated by a radio-frequency glow discharge in O2: cis- and trans-1,4-polybutadienes (CB and TB), amorphous 1,2-polybutadiene (VB), polybutadienes with different 1,4/1,2 contents, trans polypentenamer (TP), cis and trans polyoctenamers (CO and TO), and ethylene-propylene rubber (EPM). Transmission infrared spectra of CB and TB films revealed extensive surface recession, or etching, unaccompanied by any microstructural changes within the films, demonstrating that the reactions were confined to the surface layers. Contrary to the report by Rabek, Lucki, and Ranby (1979), there was no O(3P)-induced cis-trans isomerization in CB or TB. From weight-loss measurements, etch rates for polybutadienes were found to be markedly dependent on vinyl content, decreasing by two orders of magnitude from CB (2% 1,2) to structures with 30 to 40% 1,2 double bonds, thereafter increasing by half an order of magnitude to VB (97% 1,2). Relative etch rates for EMP and the polyalkenamers were in the order: EMP is greater than CO (or TO) is greater than TP is greater than CB. The sole non-elastomer examined, TB, had an etch rate about six times that of CB, ascribable to a morphology difference. Cis/trans content had a negligible effect on the etch rate of the polyalkenamers. Mechanisms involving crosslinking through units are proposed for the unexpected protection imparted to polybutadienes by the 1,2 double bonds.
A surface of a steel substrate is nitrided without external heating by exposing it to a beam of nitrogen ions under low pressure, a pressure much lower than that employed for ion-nitriding. An ion source is used instead of a glow discharge. Both of these features reduce the introduction of impurities into the substrate surface.
The objective of this study is to improve the stability and efficiency of thin solar cells with emphasis on a-Si:H devices. The research project was broken down into three main phases. The first involves designing and building a UHV glow discharge system; the second involves making good quality films and eventually efficient cells; the final phase will be analytical.
A color-center laser operating near 2.7 microns has been used to study optogalvanic effects in a xenon dc glow discharge. Exciting eleven transitions between the higher lying Rydberg levels, with one exception, resulted in an increase in the discharge ionization rate. Absorption on the 5d(3/2)1-6p(1/2)0 transition in xenon caused the ionization rate to decrease. The mechanism for this effect is related to the extremely short radiative lifetime of the 5d(3/2)1 level.
The present conference discusses plasma-assisted surface coating/modification processes, the applications to date of ion nitriding, the effects of nitrogen on metal surfaces, ion nitriding mechanisms in Cr, Al and Cr + Al-containing 1040 steel, ion nitriding of Al and its alloys, life enhancement for forging dies, novel anode plasma nitriding developments, and a comparative study of the pulsed and dc ion-nitriding behavior in specimens with blind holes. Also discussed are the influence of heating method on ion nitriding, surface hardening of marage steels by ion nitriding without core hardness reduction, plasma nitriding of nodular cast iron sput gears, NbN composites for superconductors, the carburization of tungsten in a glow discharge methane plasma, economic considerations concerning plasma nitriding, and the corrosion properties obtained by ion nitriding.
This paper reports on an in situ silicon deposition process diagnostics, using CARS performed at state-of-the-art a-Si:H film deposition conditions in a reactor designed for a-Si:H solar cell fabrication. The diagnostics procedure measures the silane depletion in an RF plasma as a function of the silane flow rate (where the relationship is linear between 50-percent depletion, at a flow rate of 5.6 sccm, and about 8-percent depletion, at 80 sccm) and the RF power (where the silane depletion is linearly dependent on the RF power in the region of 4 to 12 W). The linear RF power dependence of the silane depletion is considered to be consistent with the mechanism of silane decomposition primarily by electron impact dissociations, while the flow rate dependence is interpreted in terms of the residence time of the SiH4 molecules in the glow discharge region, where an increase of the residence time at a low flow rate results in a high depletion ratio.