Search NASA⌕ Search

SEARCH · Search NASA

Results for “Higher order calculations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Understanding Lithium Local Environments in LiMn 0.5 Ni 0.5 O 2 Cathodes: A DFT-Supported 6 Li Solid-State NMR Study

LiMn 0.5 Ni 0.5 O 2 has been plagued by the structural failure driven by the irreversible phase change upon subsequent cycling and the structural degradation caused by the seemingly unavoidable Li/Ni exchange. This begs for a better understanding of the correlation between lithium local structures, synthesis conditions, and overall electrochemical properties of materials. In this study, we use density functional theory (DFT) to assist experimental 6 Li solid-state magic angle spinning (MAS) nuclear magnetic resonance (NMR) spectroscopy to understand the nature and change in lithium local structures with extended annealing times (168 vs 15 h) synthesized at 900 °C. To correlate the NMR peak changes after different synthesis conditions, we calculated the NMR spectra of representative low-energy model configurations of LiMn 0.5 Ni 0.5 O 2 composition–zigzag, row, and flower structures–as well as the influence of Ni/Mn ordering and Li/Ni exchange on each spectrum using a supercell that is large enough to allow us to consider the effect of different relative configurations of adjacent transition metal (TM) layers. The analysis based on a combination of the calculated NMR and the experimental spectra suggests that most configurations contributing to the experimental spectra are in fact composed of a blend of configurations higher in energy than the classical well-ordered ground-state structures. Further, the extended annealing of LiMn 0.5 Ni 0.5 O 2 slightly enhances Ni/Mn and Li/Mn orderings while reducing the Li/Ni mixing ratio. This study shows how DFT calculations are crucial in providing a better understanding of the experimental characterization data and therefore local environments and domain structures in oxide materials, such as Li-ion battery cathodes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1990

Turbulent supersonic convection in three dimensions

Previous numerical calculations of two-dimensional, compressible convection are extended to three dimensions, using a higher order Godunov scheme. The results show that the flow readily becomes supersonic in the upper boundary layer, where shock structures form intermittently in the vicinity of the strong downflow lanes. The convection as a whole is strongly time-dependent and evolves on a time scale comparable to the sound crossing time. The motions in the upper layers are characterized by the rapid expansion of the upward-moving fluid elements. In the interior, most of the heat is carried by a small fraction of the fluid residing in strong, highly coherent downflows. The remaining fluid is dominated by small-scale, disorganized turbulent motions.

Malagoli, Andrea↗
NASA NTRS2005

Computing Gravitational Fields of Finite-Sized Bodies

A computer program utilizes the classical theory of gravitation, implemented by means of the finite-element method, to calculate the near gravitational fields of bodies of arbitrary size, shape, and mass distribution. The program was developed for application to a spacecraft and to floating proof masses and associated equipment carried by the spacecraft for detecting gravitational waves. The program can calculate steady or time-dependent gravitational forces, moments, and gradients thereof. Bodies external to a proof mass can be moving around the proof mass and/or deformed under thermoelastic loads. An arbitrarily shaped proof mass is represented by a collection of parallelepiped elements. The gravitational force and moment acting on each parallelepiped element of a proof mass, including those attributable to the self-gravitational field of the proof mass, are computed exactly from the closed-form equation for the gravitational potential of a parallelepiped. The gravitational field of an arbitrary distribution of mass external to a proof mass can be calculated either by summing the fields of suitably many point masses or by higher-order Gauss-Legendre integration over all elements surrounding the proof mass that are part of a finite-element mesh. This computer program is compatible with more general finite-element codes, such as NASTRAN, because it is configured to read a generic input data file, containing the detailed description of the finiteelement mesh.

Quadrelli, Marco↗
DOE OSTI2020

Very massive tracers and higher derivative biases

Most of the upcoming cosmological information will come from analyzing the clustering of the Large Scale Structures (LSS) of the universe through LSS or CMB observations. It is therefore essential to be able to understand their behavior with exquisite precision. The Effective Field Theory of Large Scale Structures (EFTofLSS) provides a consistent framework to make predictions for LSS observables in the mildly non-linear regime. Herein we focus on biased tracers. We argue that in calculations at a given order in the dark matter perturbations, highly biased tracers will underperform because of their larger higher derivative biases. A natural prediction of the EFTofLSS is therefore that by simply adding higher derivative biases, highly massive tracers should perform comparably well. We implement this prediction for the halo-halo and the halo-matter power spectra at one loop, and the halo-halo-halo, halo-halo-matter, and halo-matter-matter bispectra at tree-level, and compare with simulations. We find good agreement with the prediction: at $z$ = 0, for all tracers, we are able to match the power spectra up to $k ≃$ 0.28$h$ Mpc -1 , as well as a small set of about 10 2 bispectra triangles up to $k ≃$ 0.17$h$ Mpc -1 . We also discuss the limitations of our study and some avenues to pursue to further establish these findings.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Hydraulic Response to Thermal Stimulation Efforts at Raft River Based on Stepped Rate Injection Testing

The injection well stimulation project at the Raft River geothermal field tests the effect of long-term cold water injection and high pressure injection on well injectivity, improvements to which could reduce operating costs. The primary data for analysis and interpretation of the injection test are step-rate flow tests run before each new phase of the injection. These tests were analyzed using a combination of standard pump-test analytical solution methods and methods developed expressly for the observed conditions. The stepped rate injection tests, combined with long-term flow and pressure response data suggest that the well is located within a fractured formation of low transmissivity but high storativity. These calculated parameters appeared to increase with pressure during the first injection test and the higher values were reproduced during the second stepped rate test. Calculated transmissivity and storativity are on the order of 4E-5 m cm 2 and 1E-4 m Pa -1 , respectively. The apparent pressure dependence of fitted hydraulic parameters may reflect near-well fracture compliance that increased the effective radius of the wellbore during the first test. While the type curve fit analysis also suggests that the reservoir behaves as a uniformly fractured reservoir with a radial flow regime, the hydraulic parameters indicate that condition may exist only a very limited distance (<10 m) from the well. Longer-term pressure response suggests that flow in the system effectively reaches steady state in a period of less than a day, which may reflect pressure stabilization resulting from pressure-dependent permeability or a region of much higher permeability located with a few meters of the well. The transmissivity estimates obtained from this analysis, converted to approximate fracture density and aperture, provide useful constraints on the distance to which the thermal front may migrate from the well during the cold water injection phase of the stimulation project. We estimate that the cooling front will migrate less than a tenth of a kilometer over an approximately one-year injection period. Here, the effects of that cooling, however, may be substantial, because increases in permeability have maximum effect nearest the well.

cold water injection↗
NASA NTRS1959

A Numerical Method for Obtaining Monoenergetic Neutron Flux Distributions and Transmissions in Multiple-Region Slabs

This method is investigated for semi-infinite multiple-slab configurations of arbitrary width, composition, and source distribution. Isotropic scattering in the laboratory system is assumed. Isotropic scattering implies that the fraction of neutrons scattered in the i(sup th) volume element or subregion that will make their next collision in the j(sup th) volume element or subregion is the same for all collisions. These so-called "transfer probabilities" between subregions are calculated and used to obtain successive-collision densities from which the flux and transmission probabilities directly follow. For a thick slab with little or no absorption, a successive-collisions technique proves impractical because an unreasonably large number of collisions must be followed in order to obtain the flux. Here the appropriate integral equation is converted into a set of linear simultaneous algebraic equations that are solved for the average total flux in each subregion. When ordinary diffusion theory applies with satisfactory precision in a portion of the multiple-slab configuration, the problem is solved by ordinary diffusion theory, but the flux is plotted only in the region of validity. The angular distribution of neutrons entering the remaining portion is determined from the known diffusion flux and the remaining region is solved by higher order theory. Several procedures for applying the numerical method are presented and discussed. To illustrate the calculational procedure, a symmetrical slab ia vacuum is worked by the numerical, Monte Carlo, and P(sub 3) spherical harmonics methods. In addition, an unsymmetrical double-slab problem is solved by the numerical and Monte Carlo methods. The numerical approach proved faster and more accurate in these examples. Adaptation of the method to anisotropic scattering in slabs is indicated, although no example is included in this paper.

Schneider, Harold↗
NASA NTRS1995

Building a better leapfrog

In stellar dynamical computer simulations, as well as other types of simulations using particles, time step size is often held constant in order to guarantee a high degree of energy conservation. In many applications, allowing the time step size to change in time can offer a great saving in computational cost, but variable-size time steps usually imply a substantial degradation in energy conservation. We present a meta-algorithm' for choosing time steps in such a way as to guarantee time symmetry in any integration scheme, thus allowing vastly improved energy conservation for orbital calculations with variable time steps. We apply the algorithm to the familiar leapfrog scheme, and generalize to higher order integration schemes, showing how the stability properties of the fixed-step leapfrog scheme can be extended to higher order, variable-step integrators such as the Hermite method. We illustrate the remarkable properties of these time-symmetric integrators for the case of a highly eccentric elliptical Kepler orbit and discuss applications to more complex problems.

Hut, Piet↗
DOE OSTI2020

First-principles theory of the Dirac semimetal Cd 3 As 2 under Zeeman magnetic field

Time-reversal broken Weyl semimetals have attracted much attention recently, but certain aspects of their behavior, including the evolution of their Fermi surface topology and anomalous Hall conductivity with Fermi-level position, have remained underexplored. A promising route to obtain such materials may be to start with a nonmagnetic Dirac semimetal and break time-reversal symmetry via magnetic doping or magnetic proximity. Here we explore this scenario in the case of the Dirac semimetal Cd 3 As 2 , based on first-principles density-functional calculations and subsequent low-energy modeling of Cd 3 As 2 in the presence of a Zeeman field applied along the symmetry axis. We clarify how each four-fold degenerate Dirac node splits into four Weyl nodes, two with chirality ±1 and two higher-order nodes with chirality ±2. Using a minimal k · p model Hamiltonian whose parameters are fit to the first-principles calculations, we detail the evolution of the Fermi surfaces and their Chern numbers as the Fermi energy is scanned across the region of the Weyl nodes at fixed Zeeman field. We also compute the intrinsic anomalous Hall conductivity as a function of Fermi-level position, finding a characteristic inverted-dome structure. Cd 3 As 2 is especially well suited to such a study because of its high mobility, but the qualitative behavior revealed here should be applicable to other Dirac semimetals as well.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1975

Calculation of arbitrary-order diffraction efficiencies of thick gratings with arbitrary grating shape

A method for calculating arbitrary-order diffraction efficiencies of thick, lossless transmission gratings with arbitrary periodic grating shapes has been developed. A Fourier-series representation of the grating is employed, along with a coupled-mode theory of diffraction. For illustration, numerical values of the diffraction efficiencies at the first three Bragg angles are calculated for sinusoidal, square-wave, triangular, and saw-tooth gratings. Numerical results for the same grating shapes with the same parameters are also calculated for comparison, by extending Burckhardt's numerical method for analyzing thick sinusoidal gratings. The comparison shows that the coupled-mode theory provides results with relative computational ease and results that are in agreement with calculations obtained by extending the more-rigorous Burckhardt theory to nonsinusoidal grating shapes and to higher-order Bragg angles.

Su, S. F.↗
DOE OSTI2021

Harmonic Infrared and Raman Spectra in Molecular Environments Using the Polarizable Embedding Model

We present a fully analytic approach to calculate infrared (IR) and Raman spectra of molecules embedded in complex molecular environments modeled using the fragment-based polarizable embedding (PE) model. We provide the theory for the calculation of analytic second-order geometric derivatives of molecular energies and first-order geometric derivatives of electric dipole moments and dipole–dipole polarizabilities within the PE model. The derivatives are implemented using a general open-ended response theory framework, thus allowing for an extension to higher-order derivatives. The embedding-potential parameters used to describe the environment in the PE model are derived through first-principles calculations, thus allowing a wide variety of systems to be modeled, including solvents, proteins, and other large and complex molecular environments. Here, we present proof-of-principle calculations of IR and Raman spectra of acetone in different solvents. This work is an important step toward calculating accurate vibrational spectra of molecules embedded in realistic environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

High temperature stability and transport characteristics of hydrogen in alumina via multiscale computation

Here, the impact of hydrogen charge states on the stability and transport characteristics of hydrogen interstitials in alumina polymorphs is evaluated by multiscale computational methods including density functional theory (DFT), ab initio molecular dynamics (AIMD) and machine learned force fields. Thermodynamic calculations show that the protonic H i +1 interstitial is the most stable defect species for most values of the electronic bandgap in both and amorphous alumina (Al 2 O 3 ). Further, active learned Gaussian approximation potentials (GAP) were developed using AIMD data to study temperature dependent long time proton diffusion in alumina. Diffusivity calculations from GAP-MD simulations are found to be comparable with of the AIMD data, while being ~340 times faster and scalable to larger systems. Comparisons with diffusivity values for other interstitial charge states (H i 0 and H i -1 ) and published experimental literature indicate that H i +1 diffusion is the likely mechanism of hydrogen transport. A good agreement is obtained between H i +1 diffusivity calculated in α-Al 2 O 3 from DFT: 5.05 10 -3 exp(-0.81 eV/k B /T) cm 2 /s and reported experiment: 9.7X10 -4 exp(-0.83 eV/k B /T) cm 2 /s. Computationally and experimentally calculated energy barriers (0.81 and 0.83 eV respectively) only differ by 2.5%. Similarly, the pre-exponential diffusion coefficients only differ by 0.5 orders of magnitude. Moreover, the diffusivity of H i +1 in amorphous Al 2 O 3 in the 1000–2000 K range is calculated to be 2.53X10 -2 exp(-0.89 eV/k B /T), just one order of magnitude higher than the corresponding value in α-Al 2 O 3 . This suggests that local structural disorder does not significantly affect the energy landscape and diffusion behavior of H i +1 in Al 2 O 3 . Overall, these results show promise for the application of alumina polymorphs as hydrogen permeation barriers.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Staged Z-pinch modeling of high and low atomic number liners compressing deuterium targets using parameters of the Z pulsed power facility

The staged Z-pinch is a potentially transformative magneto-inertial fusion energy concept where a high atomic number liner implodes on a deuterium or deuterium-tritium target using multi-MA pulsed current. Over the past several years, this concept was studied experimentally on 1 MA facilities with argon or krypton gas puffs compressing a magnetized deuterium target. Consistent thermonuclear neutron yield of 1010 per shot was measured with krypton liners. In this paper, we investigate the fusion performance of deuterium targets of varying density undergoing compression with low (beryllium) and high atomic number liners (silver, tantalum) using parameters of the Z pulsed power facility. Silver and tantalum liners create strong shocks that preheat the target plasma above 100 eV and pile up liner material at the liner-target interface. The increased mass density at the interface creates strong ram pressure just before the pinch stagnation time. The target plasma is heated to 2–4 keV, in contrast to the < 0.5 kV temperature calculated for the beryllium case. The high atomic number liners produce neutron yield orders of magnitude higher than the yield from the low atomic number liner.

Ruskov, E. (ORCID:0000000336724580)↗
DOE OSTI2021

Minimal two-body quantum absorption refrigerator

Here, we study the phenomenon of absorption refrigeration, where refrigeration is achieved by heating instead of work, in two different setups: a minimal set up based on coupled qubits and two nonlinearly coupled resonators. Considering ZZ interaction between the two qubits, we outline the basic ingredients required to achieve cooling. Using local as well as global master equations, we observe that inclusion of an XX type term in the qubit-qubit coupling is detrimental to cooling. We compare the cooling effect obtained in the qubit case with that of nonlinearly coupled resonators (multilevel system) where the ZZ interaction translates to a Kerr-type nonlinearity. For small to intermediate strengths of nonlinearity, we observe that multilevel quantum systems, for example qutrits, give better cooling effect compared to the qubits. Using Keldysh nonequilibrium Green's function formalism, we go beyond first order sequential tunneling processes and study the effect of higher order processes on refrigeration. We find a reduced cooling effect compared to the master equation calculations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

QCD splitting functions beyond kinematical limits

In this talk, I will present a new decomposition of QCD splitting functions, carried out systematically up to second order in the strong coupling. The core idea is to separate the splitting functions into two components: scalar dipole radiator functions and pure splitting remainders. While these pieces include terms that are formally subleading in the soft or collinear limits, they turn out to be universal and well understood. Unlike conventional approaches, our construction does not rely on any soft or collinear approximations. This framework not only offers a clearer understanding of the structure of higher-order QCD corrections but also paves the way for more robust subtraction schemes in precision calculations.

Knobbe, Max [Fermilab]↗
NASA NTRS1977

Some optical and kinetic properties of the nearby interstellar gas

A model for resonant scattering of sunlight by the nearby interstellar gas is developed which takes into account the modification of a Maxwell-Boltzmann velocity distribution by a central force. While the formalism applies to both hydrogen and helium, the latter is emphasized. Theoretical line profiles and integrated emission rates for helium are compared with those of approximate models and with existing observations. As a result of this analysis, an upward revision of the bulk flow velocity of interstellar helium relative to the solar system, previously deduced from He 584-A observations, is required. Velocities of 15-20 km/s, temperatures of the order of 5000-10,000 K, and densities of the order of 0.008-0.02 per cu cm are sufficient to explain the (helium) observations. However, higher-precision measurements are required in order to place more stringent limits on the gas parameters. Calculations of the flux of interstellar helium atoms impinging on earth's upper atmosphere show that the resulting impact ionization is small compared with terrestrial processes.

Meier, R. R.↗
NASA NTRS1941

The elliptic wing based on the potential theory

This article is intended as a contribution to the theory of the lifting surface. The aerodynamics of the elliptic wing in straight and oblique flow are explored on the basis of potential theory. The foundation of the calculation is the linearized theory of the acceleration potential in which all small quantities of higher order are disregarded.

Krienes, Klaus↗
DOE OSTI2022

High-order accurate solutions of the point kinetics equations with the spectral deferred correction method

Solving initial value problems with higher-order methods can improve the accuracy of the simulation results or the efficiency of the calculation. In this paper, we apply the spectral deferred correction (SDC) method to solve the initial value problem of the point kinetics equations (PKE). SDC is a stable, robust, and efficient high-order time-integration method capable of an arbitrary order of accuracy. For our implementation we show that it is A-stable for orders up to 8 and the order of accuracy is verified for PKE problems with a range of different reactivities. A 5.-order SDC method was then implemented to solve the exact PKE (EPKE) in the Transient Multilevel (TML) method of MPACT. The error from solutions of the EPKE is shown to be negligible. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2025

A Block-Structured Adaptive Mesh Framework to Solve Radiation Transfer Equation in Irregular Embedded Geometries

Radiation transport arises in various scientific, industrial, and medical fields, and understanding its effect in applications is needed to make accurate predictions, safety assessments and performance optimizations. Solving the Radiation Transport Equation (RTE) is challenging due to its integro-differential nature, which involves both differential and integral terms. The differential term describes the change in radiation intensity due to absorption and emission, while the integral term accounts for scattering. The accurate modeling of radiation is further complicated in many applications due to the complex, irregular geometries. Various methods exist for solving the RTE, including the zonal, Monte Carlo, spherical harmonics, discrete ordinates, and finite volume methods. Traditional mesh-based approaches, which rely on structured or unstructured meshes, struggle with irregular geometries due to: a) the difficulty of conforming structured grids to irregular domains, b) challenges in enforcing boundary conditions correctly, and c) the additional computational cost of unstructured mesh methods. This work presents a second-order accurate method for solving the RTE in irregular geometries. The radiation intensity is discretized using the finite-volume method in both spatial and angular directions on regular Cartesian grid blocks. Leveraging the block-structured adaptive mesh refinement (AMR) framework provided by AMReX, our method refines the grid locally to reduce spatial discretization error, ensuring a converged numerical solution while minimizing computational costs elsewhere. A two-stage deferred correction approach is employed: First, a first-order discretization on grid blocks is solved using an algebraic multigrid method in HYPRE. Second, a correction term is applied explicitly to achieve second-order accuracy. The correction term is calculated by approximating the radiation flux on cell faces using a Total Variation Diminishing (TVD) scheme. This approach ensures quick convergence of the multigrid method while preserving higher-order accuracy of the numerical solution. Irregular geometries are resolved as embedded boundaries (EB), resulting in both cut cells and regular cells. In cut cells, we modify the fluxes using face fractions and incorporate additional contributions from EB boundary conditions. To ensure higher-order convergence near the EB interface, the correction term is modified by interpolating the radiation intensity to fictitious ghost points. The implementation takes advantage of modern supercomputers by leveraging AMReX’sMPI/X parallelization strategy where X can be MPI or a GPU accelerator including CUDA, HIP and DPC++. We validate our solver using classical test cases, both with and without EB, demonstrating accuracy and efficiency. Additionally, we analyze the impact of adaptive mesh refinement on solution accuracy and computational cost, highlighting the advantages of our approach for high-resolution radiation transport simulations.

computational fluid dynamics (CFD)↗