Search NASA⌕ Search

SEARCH · Search NASA

Results for “Hydrogen isotopes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Instabilities and Mixing in Inertial Confinement Fusion

By imploding fuel of hydrogen isotopes, inertial confinement fusion (ICF) aims to create conditions that mimic those in the Sun's core. This is fluid dynamics in an extreme regime, with the ultimate goal of making nuclear fusion a viable clean energy source. The fuel must be reliably and symmetrically compressed to temperatures exceeding 100 million degrees Celsius. After the best part of a century of research, the foremost fusion milestone was reached in 2021, when ICF became the first technology to achieve an igniting fusion fuel (thermonuclear instability), and then in 2022 scientific energy breakeven was attained. A key trade-off of the ICF platform is that greater fuel compression leads to higher burn efficiency, but at the expense of amplified Rayleigh–Taylor and Richtmyer–Meshkov instabilities and kinetic-energy-wasting asymmetries. In extreme cases, these three-dimensional instabilities can completely break up the implosion. Even in the highest-yielding 2022 scientific breakeven experiment, high-atomic-number (high-Z) contaminants were unintentionally injected into the fuel. Here we review the pivotal role that fluid dynamics plays in the construction of a stable implosion and the decades of improved understanding and isolated experiments that have contributed to fusion ignition.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

The Tiny Heater: Creating Heat with Hybrid Nano-Antennas [LDRD HQ Highlights Article]

SRNL scientists demonstrate that an electromagnetic field, either as a light or magnetic field, is selectively coupled to shape-selective hybrid nano-antennas for efficient thermal processes. Localized heating occurs extremely fast, reducing the ‘wasted' thermal load on the environment. Being non-contact, efficient, and highly selective, the required input energy is greatly diminished. By strategically placing nano-antennas at desired locations, heat can be controlled at the nano-level. The location for nano-antennas, and the subsequent energy deposition, may be fine-tuned through specific chemical, steric, or magnetic interactions. The nano-antennas, composed of combinations of plasmonic, magnetic, and hydride components, are used for controlled release of hydrogen isotopes, chemotherapy drugs, environmental contaminants, enhanced catalytic processes, (bio)imaging and therapeutics.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2022

Data Report: Pore Water Geochemistry at Green Canyon 955, deepwater Gulf of Mexico

Two holes were drilled in Green Canyon Block 955 (GC 955) in the deepwater Gulf of Mexico: Hole GC 955 H002 (H002) and Hole GC 955 H005 (H005). Here we present the solute concentrations and oxygen and hydrogen isotope ratios of pore water extracted from sediment whole-round samples collected from these holes. The analytical methods, degree of sample contamination, and the method for contamination correction are discussed as are the general trends in the geochemical data.

03 NATURAL GAS↗
DOE OSTI2023

High Yield Muon Catalyzed Fusion

Fusion holds great promise as a clean and abundant energy source. However, traditional thermonuclear fusion encounters significant challenges due to the extreme temperatures required to overcome the coulomb barrier for two nuclei to fuse. In contrast, muon-catalyzed fusion presents an alternative approach that can surmount this barrier at significantly lower temperatures. Muons, with properties resembling those of electrons but 200 times heavier, can effectively reduce the atomic orbital radius, enabling central nuclei to overcome the coulomb force through the strong force. By introducing muons into a mixture of deuterium and tritium (two hydrogen isotopes), fusion is facilitated, releasing a 3.5MeV alpha particle and a 14.1MeV neutron. In the majority of cases, the muon is liberated and can initiate further fusions. However, approximately 0.8% of the time, it adheres to the alpha particle and remains bound until it either decays or undergoes reactivation through collisional ionization. To maximize the number of fusions per muon, it is crucial to enhance the cycling rate and reactivation fraction. Theoretical predictions and experimental data both suggest that the sticking rate decreases with increasing density. However, there exists a discrepancy between experimental observations and theoretical estimations regarding the extent of this decrease. To address these disparities, this experiment aims to investigate the cycling rate and sticking fraction under higher temperatures and pressures than previously explored.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Tensile Properties of Austenitic Stainless Steel Tubing with Internal Hydrogen/Tritium

Can microstructure explain the observed influence of hydrogen/tritium on tensile ductility? • Hydrogen is believed to interact with dislocations, grain boundaries, vacancies, and other microstructural features2 • How hydrogen and helium (He) interact with austenitic stainless steels remains a vigorous debate • We hypothesize that: • Hydrogen isotopes and decay helium act like solutes strengthening the steel and promoting planar deformation structures that reduce tensile ductility • These changes in mechanical behavior are not the same for differing microstructures

Wieber, Natalie↗
DOE OSTI2024

Beam Design for Muon Catalyzed Fusion

Fusion holds great promise as a clean and abundant energy source. However, traditional thermonuclear fusion encounters significant challenges due to the extreme temperatures required to overcome the coulomb barrier for two nuclei to fuse. In contrast, muon-catalyzed fusion presents an alternative approach that can surmount this barrier at significantly lower temperatures. Muons, with properties resembling those of electrons but 200 times heavier, can effectively reduce the atomic orbital radius, enabling central nuclei to overcome the coulomb force through the strong force. By introducing muons into a mixture of deuterium and tritium (two hydrogen isotopes), fusion is facilitated, releasing a 3.5MeV alpha particle and a 14.1MeV neutron. In the majority of cases, the muon is liberated and can initiate further fusions. However, approximately 0.8% of the time, it adheres to the alpha particle and remains bound until it either decays or undergoes reactivation through collisio nal ionization. To maximize the number of fusions per muon, it is crucial to enhance the cycling rate and reactivation fraction. Theoretical predictions and experimental data both suggest that the sticking rate decreases with increasing density. However, there exists a discrepancy between experimental observations and theoretical estimations regarding the extent of this decrease. To address these disparities, this experiment aims to investigate the cycling rate and sticking fraction under higher temperatures and pressures than previously explored.

43 PARTICLE ACCELERATORS↗
DOE OSTI2025

EM-Enhanced HyPOR Loop for Fast Fusion Cycles

Vacuum pumps are the heart of a fusion energy facility – fusion power cannot be generated without them. Nevertheless, the vacuum technology needed to operate a viable fuel cycle for a compact fusion power plant does not exist. Commercial vacuum technology offers the best solution to this challenge, but a pump oil recycling and detritiation system is necessary. Conventional oil detritiation processes have only been developed to deal with legacy waste and are too slow and destructive to the oil. Further, post hoc detritiation strategies are intrinsically inefficient. Our approach is to rethink the challenge holistically by designing the pumping fluid and tritium extraction system in an integrated manner to achieve an innovative solution. By selecting an oil for the specific task of pumping tritium and then designing our catalytic system to selectively target the tritium-bearing functional groups, an effective detritiation system (hydrocarbon pump oil recycling, HyPOR, loop) for fusion power plants can be obtained. The project demonstrated a HyPOR loop process that can selectively remove heavier hydrogen isotopes from pump oil, reaching the target of 99.5 % removal, with an uptake of less than 0.01% of tritium throughput, while also purifying the oil of radiation-induced damage. The recycled oil retained its pumping characteristics over 7 recycles and gamma irradiation over 30 MGy. By meeting these targets, the project enable a reduction in pump operational costs from $\$$14.5M/year to $\$$103k/year (>140× reduction), reducing pump electric power consumption from 2.8 MW to 0.25 MW (>10× reduction), and reducing in-process tritium inventory from 2.03 kg to 0.48 kg (>4× reduction).

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Considerations for the Development of a Regenerable LANA.75 Bed for Tritium Storage

LaNi4.25Al0.75 or LANA.75 has been used by the Savannah River Site Tritium Facilities for decades to safely store hydrogen isotopes • High molar density at moderate pressures (~1000x that of gas at STP) = less glovebox space • Can be used as a pump by varying temperature = fewer moving parts • Can deliver He-3 free gas = fewer unit operations • Beds are limited life components due to accumulation of He-3 • Formation of “heel” • Inventory hold-up • Reduced capacity • Eventual weeping of He-3

STAACK, Gregory [Savannah River National Laborator↗
DOE OSTI2022

Building surrogate models of nuclear density functional theory with Gaussian processes and autoencoders

From the lightest Hydrogen isotopes up to the recently synthesized Oganesson (Z = 118), it is estimated that as many as about 8,000 atomic nuclei could exist in nature. Most of these nuclei are too short-lived to be occurring on Earth, but they play an essential role in astrophysical events such as supernova explosions or neutron star mergers that are presumed to be at the origin of most heavy elements in the Universe. Understanding the structure, reactions, and decays of nuclei across the entire chart of nuclides is an enormous challenge because of the experimental difficulties in measuring properties of interest in such fleeting objects and the theoretical and computational issues of simulating strongly-interacting quantum many-body systems. Nuclear density functional theory (DFT) is a fully microscopic theoretical framework which has the potential of providing such a quantitatively accurate description of nuclear properties for every nucleus in the chart of nuclides. Thanks to high-performance computing facilities, it has already been successfully applied to predict nuclear masses, global patterns of radioactive decay like β or γ decay, and several aspects of the nuclear fission process such as, e.g., spontaneous fission half-lives. Yet, predictive simulations of nuclear spectroscopy—the low-lying excited states and transitions between them—or of nuclear fission, or the quantification of theoretical uncertainties and their propagation to basic or applied nuclear science applications, would require several orders of magnitude more calculations than currently possible. However, most of this computational effort would be spent into generating a suitable basis of DFT wavefunctions. Such a task could potentially be considerably accelerated by borrowing tools from the field of machine learning and artificial intelligence. In this paper, we review different approaches to applying supervised and unsupervised learning techniques to nuclear DFT.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

A 1D Lyman-alpha Profile Camera for Plasma Edge Neutral Studies on the DIII-D Tokamak

A one dimensional, absolutely calibrated pinhole camera system was installed on the DIII-D tokamak to measure edge Lyman-alpha (Ly-a) emission from hydrogenic isotopes which can be used to infer neutral density and ionization rate proles. The system is composed of two cameras, each providing a toroidal fan of twenty lines of sight, viewing the plasma edge on the inboard and outboard side of DIII-D. The cameras' views lie in a horizontal plane 77 cm below the midplane. At its tangency radius, each channel provides a radial resolution of approximately 2 cm full width at half maximum (FWHM) with a total coverage of 22 cm. Each camera consists of a rectangular pinhole, Ly-a reflective mirror, narrow-band Ly-a transmission fiter, and a 20 channel AXUV photodetector. The combined mirror and transmission fiter have a FWHM of 5 nm, centered near the Ly-a wavelength of 121.6 nm and is capable of rejecting significant, parasitic carbon-III (C-III) emission from intrinsic plasma impurities. To provide a high spatial resolution measurement in a compact footprint, the camera utilizes advanced engineering and manufacturing techniques including 3D printing, high stability mirror mounts, and a novel alignment procedure. Absolutely calibrated, spatially resolved Ly-a brightness measurements utilize a bright, isolated line with low parasitic surface reflections and enable quantitative comparison to modeling to study divertor neutral leakage, main chamber fueling and radial particle transport.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1971

Thermal conductivity and resonant multipole interactions

The influence of multipole interactions on exchanges of rotational energy in molecular collisions was investigated by means of a simple two-state impact parameter approximation. The calculations are restricted to linear molecules and to dipole and quadrupole fields. The effects of such exchanges on the thermal conductivity of gases and of gaseous mixtures was investigated, after correcting the kinetic theory of mixtures to include exchanges between unlike molecules. It was found that dipole-quadrupole and quadrupole-quadrupole interactions may have a significant effect for molecules with low moments of inertia. In particular, quadrupole interactions are important in the hydrogen isotopes, and the calculated corrections for H2 are consistent with recent experimental work by Harris. The theory seems capable of accounting for the anomalies observed in HF + DF and HCl + DCl mixtures in terms of multipolar accidental resonances.

Nyeland, C.↗