Search NASA⌕ Search

SEARCH · Search NASA

Results for “INTERMETALLICS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Spatial mapping of the localized corrosion behavior of a magnesium alloy AZ31B tungsten inert gas weld

Sections of a magnesium alloy, AZ31B, joined with tungsten inert gas (TIG) welding, were examined with scanning electrochemical microscopy (SECM) and scanning Kelvin probe force microscopy (SKPFM) to investigate corrosion mechanisms by correlating observed corrosion behavior with weld-affected microstructural variations. Insight into the changing nature of the galvanic couples between weld zones and at localized microgalvanic sites were investigated using SECM and SKPFM to map both electrochemically active regions and Volta potential differences across the weld-affected zones. The formation of an Al-Zn solidification network in the fusion zone (FZ) at and near the TIG weld epicenter differs from the outer heat-affected zone (HAZ), where intermetallic particles (IMPs) are the notable secondary phase from the magnesium matrix. These microstructures were mapped with SKPFM before and after brief exposure to a salt solution, revealing micro-galvanic couples as the main driving force to corrosion initiation and propagation within each zone. The IMPs and Al-Zn solidification network act as strong cathodes and govern the corrosion processes. The galvanic coupling and evolution of the intrinsic corrosion behavior between the weld zones is explained by monitoring the hydrogen evolution reaction (HER) with SECM over time. Anodically induced cathodic activation is confirmed for this welded material, as micro-galvanic couples between microstructural features are found to transition over time to broad electrochemically active areas within the weld-affected zones, resulting in polarity reversal as time of exposure proceeds.

Anodically induced cathodic activation↗
DOE OSTI2025

Evaluating the bond strength and fracture mechanisms of cold-sprayed zinc coating on AZ91 magnesium substrate via a combined experimental and computational approach

Magnesium (Mg) alloys are ideal candidates for automotive applications due to their high strength to weight ratio, castability, recyclability etc., however, they lack corrosion and oxidation resistance. Solid-state deposition techniques, such as cold spray, have been demonstrated to enhance their corrosion resistance as it relies on the severe plastic deformation of powder particles upon impact with the substrate to form a metallurgical bond with the substrate and within the coating. At cold sprayed interfaces, a heterogeneous microstructure is formed that includes some porosity, oxides and intermetallics which can significantly affect coating performance. Thus, establishing a direct correlation between the interface microstructure and its properties can aid in designing optimal cold spray parameters. In this study, we investigated the microstructure and mechanical properties of a zinc (Zn) coating deposited on a high pressure die cast (HPDC) AZ91 Mg substrate via high resolution scanning transmission electron microscopy, in situ micro-tensile testing, and finite element method (FEM) modeling. Micro-tensile pillars fabricated using the plasma focused ion beam (PFIB) successfully isolates the coating-substrate interface within the gauge length. The average bond strength of Zn-Mg interface was determined to be ∼140 MPa with failure occurring partially at the interface and mostly into the coatings. A detailed microstructural characterization revealed evidence of a strong metallurgical bonding at the Zn-Mg interface and formation of the C14 MgZn 2 laves phase interlayer resulting in a mixed mode of fracture during the micro-tensile experiments. FEM modeling reveals the stress distribution along the interfaces and suggests that a MgZn 2 layer thickness between 200–400 nm is optimum to increase the bond strength and minimize the triaxiality. Such a site-specific interfacial analysis with correlative computational modeling provides crucial insight into the overall performance of cold spray interfaces.

Bond strength↗
DOE OSTI2025

Collaborative or competitive phase transformation processes in an additively manufactured-maraging steel M300

Although retained austenite is present in minor amounts in as-built additively manufactured-maraging steels, its evolution during ageing is key to controlling the final microstructure. This study investigates the relationship between austenite reversion and precipitation evolution during ageing, particularly whether these processes compete or cooperate. Using Scanning/Transmission Electron Microscopy, Atom Probe Tomography and Thermo-Calc® PRISMA simulations, the presence and evolution of retained austenite, Ni 3 Ti and Fe 7 Mo 6 intermetallic phases was characterised across different ageing conditions. Experimental results revealed the presence of non-enriched austenite in the as-built condition. Nevertheless, with increasing ageing temperature, Ni and Mo segregation became evident. High-Resolution Transmission Electron Microscopy revealed that Ni 3 Ti precipitation primarily occurred within the martensitic matrix, while Fe 7 Mo 6 nucleated preferentially at the austenite-martensite interface. PRISMA simulations indicated early and rapid precipitation in solute-enriched areas (i.e., intercellular regions), with Ni 3 Ti forming prior to Fe 7 Mo 6 . Both experimental and simulation results suggested Ni diffusion controls retained austenite growth, while Ti and Mo drive Ni 3 Ti and Fe 7 Mo 6 precipitation, respectively. The evidence reported in this work supports a both collaborative and independent phase transformation mechanism, where austenite reversion and precipitation co-evolve.

42 ENGINEERING↗
DOE OSTI2025

Compatibility of Zircaloy-4 in eutectic PbSn and PbBiSn liquid metals

Here, a novel nuclear fuel concept has been proposed, consisting of UO₂ particles suspended in a liquid metal alloy. To evaluate its feasibility, the compatibility of Zircaloy-4 cladding with candidate eutectic PbSn and PbBiSn alloys—as well as with pure Pb, Bi, and Sn—was investigated through 1000-hour exposures at 400 °C and 600 °C. Severe degradation of the Zircaloy-4 specimens was observed in eutectic PbSn at 600 °C, whereas oxidation and oxygen diffusion were evident after exposure at 400 °C. At 600 °C, the formation of Zr₃Fe precipitates at the oxide–alloy interface was identified in specimens exposed to Pb and PbBiSn. Thermodynamic analysis suggested that the observed intermetallic formation resulted from the destabilization of Laves phases due to oxygen ingress at elevated temperatures.

Bismuth↗
DOE OSTI2024

Origin of deactivation of aqueous Na–CO 2 battery and mitigation for long-duration energy storage

Here, the development of long-duration energy storage technology is crucial to facilitate the efficient utilization of renewable energy sources while mitigating carbon dioxide production. In this study, we investigate the deactivation and reactivation mechanisms of the aqueous Na–CO 2 battery during extended cycling. We have designed the cathode to include non-precious intermetallic catalysts. As the cell undergoes repeated cycles, the voltage polarization during discharge progressively rises, eventually leading to the cell's deactivation and formation of decomposition products clogging the electrode surface. Results obtained from comprehensive characterization techniques, including conductive atomic force microscopy (cAFM), Raman spectroscopy, X-ray photoelectron spectroscopy, X-ray diffraction, and inductively coupled plasma-mass spectrometry provide insight into the decomposition products. We also showcase an electrochemical approach for regeneration of these aqueous cells. Our findings, along with the insights we have gained, provide a path toward creating long-duration systems with self-healing properties.

25 ENERGY STORAGE↗
DOE OSTI2026

Thermal cycling-driven microstructural changes of eutectic Al–Si phase change materials in SS304 containers revealed by multi-modal imaging

Aluminum-based Al–Si alloys are widely used as phase change materials (PCMs) in thermal energy storage (TES) systems owing to their high volumetric latent heat and superior thermal conductivity. However, their long-term reliability is limited by degradation processes that remain insufficiently understood. In this work, we employ a multimodal, correlative characterization framework to systematically resolve the degradation behavior of eutectic Al–Si PCMs in contact with SS304 containers under repeated thermal cycling. By integrating high-resolution electron microscopy, three-dimensional X-ray fluorescence (3D XRF) imaging, and differential scanning calorimetry (DSC), we directly link spatially resolved compositional and microstructural evolution to changes in thermophysical properties. The correlative analysis reveals that elemental leaching of Fe, Cr, and Ni from the stainless-steel container into the PCM drives the formation of intermetallic compounds (IMCs) both at the interface and within the bulk PCM, leading to pronounced compositional heterogeneity. These interfacial reactions and diffusion-induced transformations progressively destabilize the Al–Si eutectic, reducing the effective phase-transforming fraction. Consistent with these observations, DSC measurements show a decrease in melting temperature and latent heat of fusion with thermal cycling. These results underscore the critical influence of interfacial reactions and material compatibility on the stability, durability, and overall performance of Al–Si-based TES systems.

25 ENERGY STORAGE↗
DOE OSTI2024

Synthesis, microstructure and micro-mechanical characterization of metal (Nb, Ti) – MAX phase (Ti 2 AlC) nanolaminates

We utilize elevated temperature physical vapor deposition (PVD) techniques to design metal/MAX multilayered nanocomposite thin films with alternating nanoscale metallic (Nb, Ti) and MAX phase (Ti 2 AlC) layer thicknesses. These metal/MAX nanolaminate architectures attempt to exploit a unique hierarchical topology – as interfaces between the layers are expected to be in direct competition with the internal interfaces within the MAX layers, to drive their tunable macroscopic mechanical behavior. Two metal/MAX nanolaminates – Nb/Ti 2 AlC and Ti/Ti 2 AlC – were deposited. The Nb/Ti 2 AlC metal/MAX system showed highly diffused layer interfaces with distinct Ti – rich and Nb–Al – rich layers, with the presence of MAX phase alongside TiC and other Ti–Al and Nb–Al intermetallic phases. The Nb/Ti 2 AlC system possessed a layered architecture, though the MAX phases were not found to be continuously present in each alternating layer. The second Ti/Ti 2 AlC system showed a non-lamellar nanocomposite microstructure and the formation of mixed Ti n+1 AlC n phases (a mix of n = 1, 2), and no indication of layering. Diffusion occurring between the metal/MAX layers in both cases, likely due to the elevated temperatures during the deposition process, is speculated as the likely cause of these resultant microstructures. The mechanical properties of both systems were evaluated using micromechanical (nanoindentation and micro-pillar compression) techniques, which demonstrated high strengths for both systems (Nb system: yield and instability strengths of 4.88 ± 0.1 GPa and 5.57 ± 0.03 GPa, Ti system: yield and instability strength of 5.61 ± 0.28 GPa and 6.21 ± 0.25 GPa). In conclusion, this work highlights the promising mechanical properties of metal/MAX multilayered depositions and summarizes the challenges in PVD synthesis of metal/MAX multilayered nanolaminates.

MAX phase↗
DOE OSTI2024

Friction stir processing on a strontium modified, thin-wall, vacuum-assisted high-pressure die-cast Aural-5 alloy to improve tensile and fatigue performance

Here, this study explores the application of friction stir processing (FSP) to enhance the material properties of Sr-modified Aural-5 alloy, with a focus on improved tensile and fatigue properties. Aural-5 is a well-known vacuum-assisted high-pressure die-cast (HPDC) Al-Si7-Mg alloy used in the automotive industry to reduce vehicle weight, enhance fuel efficiency, and lower carbon emissions. This alloy modifies its material chemistry with Sr for fine fibrous networks of eutectic silicon and manganese (Mn) to reduce die soldering. It has significantly less iron (Fe) content resulting in the elimination of detrimental needle-shaped Fe-bearing ß-phase intermetallic and improving ductility. The initial microstructure of as-received HPDC Aural-5 exhibits shrinkage porosity in the middle section, a dendritic microstructure with fibrous Al-Si eutectic colonies, a shear-band structure beneath the die-wall, large dendritic externally solidified crystals (ESCs), needle-shaped Mg 2 Si phase and significant second-phase particulates. Some of those microstructural features, such as porosity, ESCs, needle-shaped Mg 2 Si phase, and large second-phase particles, serve as initiation sites for cracks under mechanical loading, resulting in adverse effects on tensile properties, particularly ductility. FSP effectively transforms the microstructure into a wrought configuration with uniform particle distribution by eliminating porosity and disintegrating dendrites, eutectic colonies, ESCs, second-phase particles, and shear-band structures. FSP-driven microstructure modification enhances yield strength and tensile ductility by ~30% and ~35%, respectively. The fatigue life of the material in a bending mode configuration (stress ratio R = 0.1) after FSP exhibits enhancements ranging from 2.0 to 3.9 times that of the original HPDC Aural-5 alloy, depending on the applied stress level.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Microstructural evolution, defect mitigation, and precipitation behavior in AA6061 via laser powder bed fusion with high-temperature substrate heating

Defects, particularly solidification cracking, remain persistent challenges in the laser powder bed fusion (LPBF) processing of AA6061 aluminum alloy. This study systematically investigates defect mitigation, microstructural evolution, and mechanical properties associated with high-temperature substrate preheating at 500 °C. Comprehensive microstructural analyses, including characterization of defects, grain structures, and precipitation behavior, were performed on samples in both as-built and T6 heat-treated states. Elevated preheating substantially reduced solidification cracking across a wide processing window, while demonstrating decreased crack sensitivity to laser parameters. Columnar cracks along the build direction were observed despite substrate preheating. Lack-of-fusion and keyhole porosity were effectively eliminated, though gas-induced microporosity persisted at higher powers. In-depth characterization of two distinct laser power and speed conditions confirmed the formation of micron-sized, non-coherent Mg 2 Si precipitates under heated substrate conditions, alongside α-AlFeCrMnSi intermetallic phases indicative of in-situ thermal effects during fabrication. Subsequent T6 heat treatment revealed the formation of fine, coherent needle-shaped β″ strengthening precipitates. Despite substantial differences in processing parameters, comparable mechanical properties were measured in the as-built samples (∼52 MPa yield strength, ∼130 MPa tensile strength), primarily due to reduced strain hardening effects and consistent precipitation characteristics. Meanwhile, the T6 heat treatment led to significant improvement in properties, enhancing yield strength by over 400%, aligning closely with the performance of conventional wrought AA6061-T6. These findings underscore that high-temperature substrate preheating offers an effective means to suppress cracks, control precipitation, and enhance mechanical performance in LPBF-processed AA6061.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Discovery of Ternary Antimonides A–Al–Sb (A = Rb or Cs) with Desired Structural Motifs Guided by Machine Learning

Specific structural motifs in inorganic solids are often related to their targeted physical properties. For many classes of solids, such as Zintl phases and polar intermetallics, the crystal structures are diverse and not easy to predict. Various antimonides that are potential thermoelectric materials were proposed to be synthesizable on the basis of their estimated formation energies. Their structures were broadly classified as clathrate, channel, layered, or network through a machine learning model trained on existing ternary phases and features based on elemental properties using the sure independence screening and sparsifying operator algorithm. Through experimental validation, three new ternary antimonides were synthesized and confirmed to form layered structures: tetragonal RbAlSb 2 and CsAlSb 2 , which are isopointal but not isotypic to LiBSi 2 ; and monoclinic Rb 2 Al 2 Sb 3 , which adopts the Na 2 Al 2 Sb 3 -type structure. Finally, reinvestigation of the related compound Cs 2 In 2 Sb 3 revealed a low thermal conductivity and p-type semiconducting behavior.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Influence of “Non-Interacting” Flux Concentration in Metallic Flux Growth Synthesis

In situ experiments probing the mechanisms of flux growth synthesis above 1100 °C, though challenging, enable direct observation of synthetic pathways, products, and metastable phases. In this study, in situ powder X-ray diffraction of flux growth synthesis up to 1200 °C was employed to investigate the role of Sn flux in the synthesis of praseodymium cobalt germanides. We demonstrate that metallic fluxes, with minimal incorporation into the target compounds, significantly influence the reaction products of flux growth synthesis of intermetallic compounds. Furthermore, the validation of in situ experiments with bulk synthesis is also presented.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Annealing-Driven Phase Control Enables Plasmonic Tunability in Alloy Nanoparticles

A critical aspect of designing and realizing useful solid state materials is controlling phase and structure to tailor physical properties. While common for semiconductor and quantum materials, plasmonic materials have inhabited a narrow phase space typically comprising one or two elements, e.g., face-centered cubic metals. While this simplicity has enabled robust use and understanding of Au and Ag nanoparticles, it has also limited the design and manipulation of solid state properties. Here, we show that by tuning the phase and elemental composition of binary Au−Sn nanoparticles, the steady-state absorbance and ultrafast thermalization properties of plasmonic nanoparticles can be controlled. Solid state characterization suggests this is due to the dealloying of Sn and destabilization of the AuSn phase, leading to higher quality Au 5 Sn intermetallic phases alongside Au. Consequently, this work shows that phase control can profoundly influence the properties of plasmonic nanoparticles, providing important tunability for applications in catalysis, photothermal heating, and sensing.

Gold↗
DOE OSTI2025

Interplay of Crystal Structure and Magnetic Properties of the Eu 5.08-x Sr x Al 3 Sb 6 Solid Solution

Zintl phases containing rare-earth metals have gained attention due to their magnetic, electronic, and thermoelectric properties. Eu 5.08 Al 3 Sb 6 is a new structure type (monoclinic space group C2/m) that can be described as a pseudorock-salt EuSb motif with the Eu-centered Sb octahedra at the origin of the unit cell, and on the C-face center, containing either Eu (8%) or an Al 4 tetrahedron modeled as a dual tetrahedron (37.5%). The complete solid solution of Eu 5.08–x Sr x Al 3 Sb 6 can be prepared; however, the cation totals vacillate from 5 to 5.24 depending on the Al content. Al K-edge XANES shows a shift to higher energy relative to the Al metal but at slightly lower energy relative to AlSb, indicating an intermediate oxidation state closer to +3 than 0. The lack of an Al K-edge shift with the incorporation of Sr suggests that changes in Sr content do not have a meaningful impact on the electronics of the Al tetrahedra. Investigation of the solid solution structures provides evidence for classifying this structure type as a polar intermetallic phase with variable composition. Magnetization measurements were collected for the solid solution and show complex magnetic ordering with competing ferromagnetic and antiferromagnetic interactions as the Sr content increases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Search for Stable and Low-Energy Ce–Co–Cu Ternary Compounds Using Machine Learning

Cerium-based intermetallics have garnered significant research attention as potential new permanent magnets. In this study, we explore the compositional and structural landscape of Ce−Co−Cu ternary compounds using a machine learning (ML)- guided framework integrated with first-principles calculations. We employ a crystal graph convolutional neural network (CGCNN), which enables efficient screening for promising candidates, significantly accelerating the material discovery process. With this approach, we predict five stable compounds, Ce 3 Co 3 Cu, CeCoCu 2 , Ce 12 Co 7 Cu, Ce 11 Co 9 Cu, and Ce 10 Co 11 Cu 4 , with formation energies below the convex hull, along with hundreds of low-energy (possibly metastable) Ce−Co−Cu ternary compounds. Firstprinciples calculations reveal that several structures are both energetically and dynamically stable. Notably, two Co-rich low-energy compounds, Ce 4 Co 33 Cu and Ce 4 Co 31 Cu 3 , are predicted to have high magnetizations.

Chemical structure↗
DOE OSTI2024

Cold Seeded Epitaxy and Flexomagnetism in GdAuGe Membranes Exfoliated From Graphene/Ge(111)

Remote and van der Waals epitaxy are promising approaches for synthesizing single crystalline membranes for flexible electronics and discovery of new properties via extreme strain; however, a fundamental challenge is that most materials do not wet the graphene surface. We develop a cold seed approach for synthesizing smooth intermetallic films on graphene that can be exfoliated to form few nanometer thick single crystalline membranes. Our seeded GdAuGe films have narrow X-ray rocking curve widths of 9–24 arc seconds, which is 2 orders of magnitude lower than their counterparts grown by typical high temperature methods, and have atomically sharp interfaces observed by transmission electron microscopy. Upon exfoliation and rippling, strain gradients in GdAuGe membranes induce an antiferromagnetic to ferri/ferromagnetic transition. Finally, our smooth, ultrathin membranes provide a clean platform for discovering new flexomagnetic effects in quantum materials.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Role of Elemental Substitution on Hydrogen Incorporation in Characteristic Ti/Fe-Based Oxides

Elemental substitution is well-known to benefit hydrogen storage in the intermetallic compound TiFe; however, the impact of these substituents on the native and passivating surface oxide has not been well-established. Here, we perform density functional theory calculations on several characteristic oxides that are likely to form on exposed TiFe surfaces, specifically, TiO 2 , FeO, TiFeO 3 , and Ti 4 Fe 2 O. In TiO 2 and TiFeO 3 , additional acceptor species substituting for Ti can increase the solubility of protonic hydrogen (H i + ), likely enhancing hydrogen permeation of the oxide layer. In FeO, few dopants will act as acceptors, and hydrogen will incorporate as substitutional H O + , which is likely to be less mobile and will hinder hydrogen permeation. Finally, we find that Ti 4 Fe 2 O, which is thermodynamically metastable, may be stabilized by defects under O-poor conditions, although the presence of certain substitutional elements can destabilize it. In general, Mn, V, and Cr are among the best substituents for enhancing hydrogenation through the oxide layer. In conclusion, our results help to explain what features make additional elements particularly effective for enabling reversible hydrogen storage in TiFe, and they can guide further technological development of high-performing TiFe-based alloys for future energy applications.

organic↗
DOE OSTI2026

Ternary Phosphides Ba M 2 P 2 : Tailoring Crystal and Electronic Structures Enables Highly Efficient HER Electrocatalysis

Binary transition metal phosphides and their solid solutions have emerged as promising hydrogen evolution reaction (HER) catalysts. Although many research endeavors have adopted strategies to vary compositions to optimize catalytic performance, they mainly focus on binary structures, which represent only a small fraction of the abundant phase space of structure types among transition metal phosphides. Here, the largely unexplored class of ternary and multinary ordered phosphides in catalysis comprises two or more metals with quite different chemical nature, concealing the structure–property relationships essential for advancing catalyst design. Here, we explored phosphides crystallizing in one of the most abundant ordered intermetallic structure types, —the ThCr 2 Si 2 type, —where square nets of 3d transition metal M and P atoms are separated by layers of electropositive Ba cations. Four ternary BaM 2 P 2 (M = Fe, Fe/Cu, Fe/Ni, Ni) catalysts were synthesized and characterized. BaNi 2 P 2 showed high HER activity in acidic electrolyte, which required an overpotential, η 10 , of only 62 mV to drive current density j = –10 mA/cm 2 and high stability with a potential drop rate of 0.25 mV/h. BaNi 2 P 2 outperformed other Ni-based catalysts, such as Ni 2 P and Ni 5 P 4 . Notably, at current densities above –170 mA/cm 2 , BaNi 2 P 2 outperformed the standard Pt electrode measured under identical conditions. Electronic structure analysis revealed a volcano-type activity trend among the four BaM 2 P 2 catalysts based on their d-band center positions, highlighting the role of electropositive Ba cations in shifting the Ni-3d orbitals into an optimal position.

BaNi2P2↗
DOE OSTI2026

Probing Terra Incognita of Ni–P Catalysts: Operando Explorations during Hydrogen Evolution Reaction

We have developed two Ni phosphide preparation methods allowing operando XAS surface-sensitive studies of well-defined bulk systems. For Ni K-edge XAS, a Ni 2 P phase-pure powder was sintered into a high-density pellet and polished for grazing incidence XAS. Ni sites were mildly affected by the acidic electrolyte prior to the HER, while the applied cathodic potential caused the reduction of Ni surface states beyond the states of as-prepared Ni 2 P. The computed fully H-covered Ni 2 P [0001] model describes the difference in the operando Ni K-edge GIXAS spectrum well. Upon turning the applied bias off, the Ni sites became immediately oxidized, forming NiO on the surface. Thus, the active phase during the HER is covalent Ni 0 close to that in the intermetallic phosphides, and Ni 2+ oxides formed after, and not during, the HER. For P K-edge XAS, Ni foam was phosphorized to form a thin Ni 3 P layer while preserving its high surface area. Upon immersion in the acidic electrolyte, the P sites underwent removal of P 5+ phosphates and formed new P coordination, possibly due to the adsorption of protons from the electrolyte. These new P surface states were not affected by turning the cathodic current on and off as soon as the sample was immersed in the acidic electrolyte. However, the removal of the sample from the electrochemical cell and drying in air resulted in substantial depletion and oxidation of surface P. Echoing the observed Ni site chemistry during HER, XAS and XPS suggest that the in situ active P sites are different from the oxidized P states observed under ex situ conditions.

Kong, Seongyoung [Iowa State Univ., Ames, IA (Unit↗