SEARCH · Search NASA

Results for “Icing conditions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

All sources NASA NTRS DOE OSTI

NASA NTRS1997

Microfabricated Ice-Detection Sensor

Knowledge of ice conditions on important aircraft lift and control surfaces is critical for safe operation. These conditions can be determined with conventional ice-detection sensors, but these sensors are often expensive, require elaborate installation procedures, and interrupt the airflow. A micromachined, silicon-based, flush-mounted sensor which generates no internal heat has been designed, batch fabricated, packaged, and tested. The sensor is capable of distinguishing between an ice-covered and a clean surface. It employs a bulk micromachined wafer with a 7 micrometer-thick, boron-doped, silicon diaphragm which serves as one plate of a parallel-plate capacitor. This is bonded to a second silicon wafer which contains the fixed electrodes, one to drive the diaphragm by application of a voltage, the other to measure the deflection by a change in capacitance. The diaphragm sizes ranged from 1x1 mm to 3x3 mm, and the gap between parallel-plate capacitors is 2 micrometers. A 200 V d.c. was applied to the driving electrode which caused the capacitance to increase approximately 0.6pf, from a nominal capacitance of 0.6pf, when the surface was ice free. After the sensor was cooled below the freezing point of water, the same voltage range was applied to the drive electrode. The capacitance increased by the same amount. Then a drop of water was placed over the diaphragm and allowed to freeze. This created an approximately 2mm-thick ice layer. The applied 200V d.c. produced no change in capacitance, confirming that the diaphragm was locked to the ice layer. Since the sensor uses capacitive actuation, it uses very little power and is an ideal candidate for inclusion in a wireless sensing system.

DeAnna, Russell G.↗

NASA NTRS2017

Improving Our Understanding of Antarctic Sea Ice with NASA's Operation IceBridge and the Upcoming ICESat-2 Mission

Antarctic sea ice is a crucial component of the global climate system. Rapid sea ice production regimes around Antarctica feed the lower branch of the Southern Ocean overturning circulation through intense brine rejection and the formation of Antarctic Bottom Water (e.g., Orsi et al. 1999; Jacobs 2004), while the northward transport and subsequent melt of Antarctic sea ice drives the upper branch of the overturning circulation through freshwater input (Abernathy et al. 2016). Wind-driven trends in Antarctic sea ice (Holland Kwok 2012) have likely increased the transport of freshwater away from the Antarctic coastline, significantly altering the salinity distribution of the Southern Ocean (Haumann et al. 2016). Conversely, weaker sea ice production and the lack of shelf water formation over the Amundsen and Bellingshausen shelf seas promote intrusion of warm Circumpolar Deep Water onto the continental shelf and the ocean-driven melting of several ice shelves fringing the West Antarctic Ice Sheet (e.g., Jacobs et al. 2011; Pritchard et al. 2012; Dutrieux et al. 2014). Sea ice conditions around Antarctica are also increasingly considered an important factor impacting local atmospheric conditions and the surface melting of Antarctic ice shelves (e.g., Scambos et al. 2017). Sea ice formation around Antarctica is responsive to the strong regional variability in atmospheric forcing present around Antarctica, driving this bimodal variability in the behavior and properties of the underlying shelf seas (e.g., Petty et al. 2012; Petty et al. 2014).

Arctic↗

NASA NTRSDate not supplied

A LaGrangian Perspective of the Surface Energy Budget Contributions to Sea Ice Evolution in the ‘New Arctic’

Recent Arctic warming outpaces global warming and is characterized by dramatic changes in sea ice (record sea ice loss, thinner and more seasonal ice cover), warming SSTs, and a lengthening melt season. These changes impact the surface energy budget and the sensitivity of sea ice to radiative forcing, namely an increased sensitivity of thinner ice to local radiative forcings and a weaker buffering of surface-atmosphere exchanges of heat and moisture. However, these processes are a large source of uncertainty in global climate models with prior studies finding that poor representations of downwelling longwave radiation and sea ice albedo lead to model spread in sea ice conditions. A limitation of prior work is examining sea ice-atmosphere interactions through an Eulerian framework. This study utilizes a sea ice parcel dataset in a LaGrangian framework, allowing for tracking of surface energy budget-sea ice interactions over the lifespan of individual sea ice parcels; this framework also allows for the quantification of the sea ice response to episodic weather events along with seasonal drivers, including the drivers of rapid growth and melt events. First, lag-lead relationships between relevant surface energy budget terms and sea ice thickness changes are explored to understand the atmospheric conditions preceding rapid growth and melt. The impact of episodic events- moisture intrusion, warm air outbreaks, cyclones- on sea ice growth are also investigated by stratifying first-year parcels by sea ice thickness at the end of the growth season and analyzing the effect of atmospheric variability (number and intensity of episodic events) on parcel thickness change. Lastly, parcel growth and melt and the associated radiative anomalies are compared to snowfall events/snow thickness to determine how snowfall modifies the interaction between the local surface energy budget and sea ice mass balance.

Patrick Taylor↗

NASA NTRS1984

Active microwave measurements of sea ice under fall conditions: The RADARSAT/FIREX fall experiment

A series of measurements of the active microwave properties of sea ice under fall growing conditions was conducted. Ice in the inland waters of Mould Bay, Crozier Channel, and intrepid inlet and ice in the Arctic Ocean near Hardinge Bay was investigated. Active microwave data were acquired using a helicopter borne scatterometer. Results show that multiyear ice frozen in grey or first year ice is easily detected under cold fall conditions. Multiyear ice returns were dynamic due to response to two of its scene constituents. Floe boundaries between thick and thin ice are well defined. Multiyear pressure ridge returns are similar in level to background ice returns. Backscatter from homogeneous first year ice is seen to be primarily due to surface scattering. Operation at 9.6 GHz is more sensitive to the detailed changes in scene roughness, while operation at 5.6 GHz seems to track roughness changes less ably.

Onstott, R. G.↗

NASA NTRS2016

Ice Accretions and Full-Scale Iced Aerodynamic Performance Data for a Two-Dimensional NACA 23012 Airfoil

This report documents the data collected during the large wind tunnel campaigns conducted as part of the SUNSET project (StUdies oN Scaling EffecTs due to ice) also known as the Ice-Accretion Aerodynamics Simulation study: a joint effort by NASA, the Office National d'Etudes et Recherches Aérospatiales (ONERA), and the University of Illinois. These data form a benchmark database of full-scale ice accretions and corresponding ice-contaminated aerodynamic performance data for a two-dimensional (2D) NACA 23012 airfoil. The wider research effort also included an analysis of ice-contaminated aerodynamics that categorized ice accretions by aerodynamic effects and an investigation of subscale, low- Reynolds-number ice-contaminated aerodynamics for the NACA 23012 airfoil. The low-Reynolds-number investigation included an analysis of the geometric fidelity needed to reliably assess aerodynamic effects of airfoil icing using artificial ice shapes. Included herein are records of the ice accreted during campaigns in NASA Glenn Research Center's Icing Research Tunnel (IRT). Two different 2D NACA 23012 airfoil models were used during these campaigns; an 18-in. (45.7-cm) chord (subscale) model and a 72-in. (182.9-cm) chord (full-scale) model. The aircraft icing conditions used during these campaigns were selected from the Federal Aviation Administration's (FAA's) Code of Federal Regulations (CFR) Part 25 Appendix C icing envelopes. The records include the test conditions, photographs of the ice accreted, tracings of the ice, and ice depth measurements. Model coordinates and pressure tap locations are also presented. Also included herein are the data recorded during a wind tunnel campaign conducted in the F1 Subsonic Pressurized Wind Tunnel of ONERA. The F1 tunnel is a pressured, high- Reynolds-number facility that could accommodate the full-scale (72-in. (182.9-cm) chord) 2D NACA 23012 model. Molds were made of the ice accreted during selected test runs of the full-scale model in the IRT. From these molds, castings were made that closely replicated the features of the accreted ice. The castings were then mounted on the full-scale model in the F1 tunnel, and aerodynamic performance measurements were made using model surface pressure taps, the facility force balance system, and a large wake rake designed specifically for these tests. Tests were run over a range of Reynolds and Mach numbers. For each run, the model was rotated over a range of angles-of-attack that included airfoil stall. The benchmark data collected during these campaigns were, and continue to be, used for various purposes. The full-scale data form a unique, ice-accretion and associated aerodynamic performance dataset that can be used as a reference when addressing concerns regarding the use of subscale ice-accretion data to assess full-scale icing effects. Further, the data may be used in the development or enhancement of both ice-accretion prediction codes and computational fluid dynamic codes when applied to study the effects of icing. Finally, as was done in the wider study, the data may be used to help determine the level of geometric fidelity needed for artificial ice used to assess aerodynamic degradation due to aircraft icing. The structured, multifaceted approach used in this research effort provides a unique perspective on the aerodynamic effects of aircraft icing. The data presented in this report are available in electronic form upon formal approval by proper NASA and ONERA authorities.

Addy, Harold E., Jr.↗

NASA NTRS1953

An Analytical Study of Heat Requirements for Icing Protection of Radomes

The heat requirements for the icing protection of two radome configurations have been studied over a range of design icing conditions. Both the protection limits of a typical thermal protection system and the relative effects of the various icing variables have been determined. For full evaporation of all impinging water, an effective heat density of 14 watts per square inch was required. When a combination of the evaporation and running wet surface systems was employed, a heat requirement of 5 watts per square inch provided protection at severe icing and operating conditions.

James P. Lewis↗

NASA NTRSDate not supplied

Analysis of Hot-Wire Probe Ice Water Content Measurements in High Ice Water Content Conditions

During the 2022 High Ice Water Content (HIWC) Flight Campaign, ice water content (IWC) measurements were made at various locations on the NASA DC-8 Airborne Science Laboratory using the Isokinetic Probe Version 2 (IKP2), Ice Crystal Detectors (ICD), and Robust Probe. Correlations of a wing mounted ICD to IKP2 were made to determine the collision/retention efficiency of the ICD total water content (TWC) element in glaciated conditions. Similarly, correlations of a nose mounted ICD near the pitot probes were made to the IKP2 and to the wing-mounted ICD to estimate the ice concentration factor near the DC-8 pitot probes. Results from the 2022 flight campaign were compared to results from the HIWC RADAR II flight campaign in 2018. There was an apparent reduction in the ICD TWC collision/retention efficiency during the 2022 flight campaign. Although reasons for this discrepancy were explored, more analyses are needed to fully understand the causes. However, it was concluded that an estimated ice concentration factor at the nose of 2.5 was consistent between the two flight campaigns. Additionally, a correlation model was developed to relate measurements from a Nose ICD to freestream IWC as measured by the IKP2 to support IWC measurements from the 2022 Convective Processes Experiment - Cabo Verde (CPEX-CV) flight campaign.

Icing↗

NASA NTRSDate not supplied

Analysis of Hot-Wire Probe Ice Water Content Measurements in High Ice Water Content Conditions

Icing↗

NASA NTRS2019

Experimental Aerodynamic Simulation of Scallop Ice Accretion on a Swept Wing

Understanding the aerodynamic impact of swept-wing ice accretions is a crucial component of the design of modern aircraft. Computer-simulation tools are commonly used to approximate ice shapes, so the necessary level of detail or fidelity of those simulated ice shapes must be understood relative to high-fidelity representations of the ice. Previous tests were performed in the NASA Icing Research Tunnel to acquire high-fidelity ice shapes. From this database, full-span artificial ice shapes were designed and manufactured for both an 8.9%-scale and 13.3%-scale semispan wing model of the CRM65 which has been established as the full-scale baseline for this swept-wing project. These models were tested in the Walter H. Beech wind tunnel at Wichita State University and at the ONERA F1 facility, respectively. The data collected in the Wichita St. University wind tunnel provided a low-Reynolds number baseline study while the pressurized F1 facility produced data over a wide range of Reynolds and Mach numbers with the highest Reynolds number studied being approximately Re=11.9x106. Past work focused on only three different fidelity variations for ice shapes based on multiple icing conditions. This work presents a more detailed investigation into several fidelity representations of a single highly three-dimensional scallop ice accretion. Sensitivity to roughness size and application technique on a low-fidelity smooth ice shape is described. The data indicate that the aerodynamic performance is not especially sensitive to the grit variations. An ice accretion code was also used to generate ice shapes for aerodynamic testing and comparisons. These ice shapes have a general appearance like the low-fidelity smooth ice shapes, but in this case, the computer-generated ice shape is significantly smaller. As such, the impact of that ice shape on the aerodynamic performance of the wing is reduced compared to the smooth ice shape based on the icing experiment for those same conditions. Spanwise discontinuities were also introduced to a low-fidelity ice shape in an attempt to quantify the impact of those variation in the high-fidelity ice shape. While the lift data indicate good agreement between the high-fidelity ice shapes and the low-fidelity ice shapes and the low-fidelity ice shapes with spanwise discontinuities, a closer investigation of the data suggests potential, significant differences in the flowfield. These results were similar at both facilities over the wide range of test conditions utilized.

Woodard, Brian↗

DOE OSTI2024

Reducing uncertainty of polar to midlatitude linkages using DOE’s E3SM in a coordinated model-experiment setting

This project brought DOE’s climate modeling effort with the Energy Exascale Earth System Model into the Polar Amplification Model Intercomparison Project (PAMIP), which is part of the sixth and latest Coupled Model Intercomparison Project, CMIP6. PAMIP examines the causes and consequences of polar amplification, when external forcing results in a larger temperature increase in high latitudes than the global average, in a coordinated set of model experiments with a common modeling protocol. Our teams from UC Irvine and the University of Toronto have designed, carried out, analyzed, and disseminated PAMIP output from the Energy Exascale Earth System Model (E3SM) and the Community Earth System Model (CESM). PAMIP’s ongoing stream of significant new results have advanced progress in the community’s understanding and led to new outstanding research questions that have motivated further work. PAMIP has led to improved consensus on the atmospheric response to sea ice loss. The important finding is that for a similar sea ice anomaly forcing, the simulated atmospheric response in the troposphere is remarkably consistent among the 16 models’ runs analyzed. The zonal-mean tropospheric response consists of a very robust equatorward shift of the westerly flow in mid-latitudes. However, while the multi-model mean response is robust, it has a weak amplitude relative to internal variability. We identified a weakness in the models (including E3SM) in terms of their response to sea-ice forcing that is related to eddy forcing (or nonlinear dynamical effects) at mid- to high latitudes. In fact, E3SM is an outlier in terms of the models participating, and in that sense, it turned out to be a vital participant model. We found that reductions in energy transport due sea-ice loss and involving dry air only are compensated by increases in moist energy transport from warmer sea surface temperature in midlatitudes. This leads to a large spread in energy transport into the Arctic and is a potential source of spread in Arctic amplification. We identified an important role that climate modes, including tropical modes of variability (El Nino and the Southern Oscillation (ENSO); the Quasi-biennial Oscillation (QBO)) play in the response to sea-ice anomalies, including in ocean coupled experiments. Similarly, we identified and quantified the contribution of sea-ice thickness to the atmospheric response compared to the response to sea-ice extent only. We found that it is important to run large ensembles and even with an ensemble size of 100 simulations the response is largely influenced by internal variability. We demonstrated convincingly that Ural blocking, not sea-ice loss, provides the weakening of the stratospheric polar vortex in fall/early winter and a negative phase of the North Atlantic Oscillation that can last for up to two months. However, sea-ice anomalies can influence the background flow so that the response to Ural blocking is more persistent under low sea-ice conditions in the Barents/Kara Sea than high sea ice Atmospheric model hierarchies that progressively add individual processes have a long history in providing dynamical insight for modeling the atmosphere. Similarly, coupled model hierarchies that progressively add individual ocean processes can provide insights into the workings of the coupled climate system, however such hierarchies have not been available except for a non-dynamical slab ocean model. Because of the missing processes, surface flux corrections must be added to produce a target climate. In this project, we managed to overcome this problem and develop a globally coupled ocean model hierarchy in CESM that can turn on and off the processes of mixed-layer entrainment and Ekman flow. We used the hierarchy to study the impact of Arctic sea-ice loss on the climate system. We find that the effect of mixed-layer entrainment on ocean heat uptake influences the atmospheric circulation by shifting the latitudinal positions of the mid-latitude westerly jet and the Intertropical Convergence Zone (ITCZ). In quadrupled CO 2 experiments, we studied how air-sea coupling affects the response of tropical rainfall under global warming. In order to identify the importance of individual ocean processes, we used the hierarchy of ocean models to separate the effects of seasonal mixed-layer entrainment, wind-driven Ekman flows, and frictional flows. We showed that including Ekman and frictional flows allows our simulation to produce the Pacific Ocean's enhanced equatorial warming pattern and equatorward ITCZ contraction noted in previous climate simulations. We also showed that the frictional flow, which has yet to receive much attention, is as important as the Ekman flow in generating equatorial heat convergence.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2024

Probabilistic projections of the Amery Ice Shelf catchment, Antarctica, under conditions of high ice-shelf basal melt

Abstract. Antarctica's Lambert Glacier drains about one-sixth of the ice from the East Antarctic Ice Sheet and is considered stable due to the strong buttressing provided by the Amery Ice Shelf. While previous projections of the sea-level contribution from this sector of the ice sheet have predicted significant mass loss only with near-complete removal of the ice shelf, the ocean warming necessary for this was deemed unlikely. Recent climate projections through 2300 indicate that sufficient ocean warming is a distinct possibility after 2100. This work explores the impact of parametric uncertainty on projections of the response of the Lambert–Amery system (hereafter “the Amery sector”) to abrupt ocean warming through Bayesian calibration of a perturbed-parameter ice-sheet model ensemble. We address the computational cost of uncertainty quantification for ice-sheet model projections via statistical emulation, which employs surrogate models for fast and inexpensive parameter space exploration while retaining critical features of the high-fidelity simulations. To this end, we build Gaussian process (GP) emulators from simulations of the Amery sector at a medium resolution (4–20 km mesh) using the Model for Prediction Across Scales (MPAS)-Albany Land Ice (MALI) model. We consider six input parameters that control basal friction, ice stiffness, calving, and ice-shelf basal melting. From these, we generate 200 perturbed input parameter initializations using space filling Sobol sampling. For our end-to-end probabilistic modeling workflow, we first train emulators on the simulation ensemble and then calibrate the input parameters using observations of the mass balance, grounding line movement, and calving front movement with priors assigned via expert knowledge. Next, we use MALI to project a subset of simulations to 2300 using ocean and atmosphere forcings from a climate model for both low- and high-greenhouse-gas-emission scenarios. From these simulation outputs, we build multivariate emulators by combining GP regression with principal component dimension reduction to emulate multivariate sea-level contribution time series data from the MALI simulations. We then use these emulators to propagate uncertainty from model input parameters to predictions of glacier mass loss through 2300, demonstrating that the calibrated posterior distributions have both greater mass loss and reduced variance compared to the uncalibrated prior distributions. Parametric uncertainty is large enough through about 2130 that the two projections under different emission scenarios are indistinguishable from one another. However, after rapid ocean warming in the first half of the 22nd century, the projections become statistically distinct within decades. Overall, this study demonstrates an efficient Bayesian calibration and uncertainty propagation workflow for ice-sheet model projections and identifies the potential for large sea-level rise contributions from the Amery sector of the Antarctic Ice Sheet after 2100 under high-greenhouse-gas-emission scenarios.

54 ENVIRONMENTAL SCIENCES↗

NASA NTRS1948

Investigation of Effectiveness of Air-Heating a Hollow Steel Propeller for Protection Against Icing. 3: 25% Partitioned Blades

The icing protection obtained from an internally air-heated propeller blade partitioned to confine the heated air forward of 25-percent chord was investigated in the NACA Cleveland icing research tunnel. A production-model hollow steel propeller was modified with an Internal radial partition at 25-percent chord and with shank and tip openings to admit and exhaust the heated air. Temperatures were measured on the blade surfaces and in the heated-air system during tunnel icing conditions. Heat-exchanger effectiveness and photographs of Ice formations on the blades were obtained. Surface temperature measurements indicated that confining the heated air forward of the 25-percent chord gave.a more economical distribution of the applied heat as compared with unpartitioned and 50-percent partitioned blades, by dissipating a greater percentage of the available heat at the leading edge. At a propeller speed of 850 rpm, a heating rate of 7000 Btu per hour per blade at a shank air temperature of 400 F provided adequate Icing protection at ambient-air temperatures of 23 F but not at temperatures as low as 15 F. With the heating rate used, a heat-exchanger effectiveness of 77 percent was obtained as compared to 56 percent for 50-percent partitioned and 47 percent for unpartitioned blades.

Mulholland, Donald R.↗

NASA NTRS1988

In-flight measurement of ice growth on an airfoil using an array of ultrasonic transducers

Results of preliminary tests to measure ice growth on an airfoil during flight icing conditions are presented. Ultrasonic pulse echo measurements of ice thickness are obtained from an array of eight ultrasonic transducers mounted flush with the leading edge of the airfoil. These thickness measurements are used to document the evolution of the ice shape during the encounter in the form of successive ice profiles. Results from 3 research flights are presented and discussed. The accuracy of the ultrasonic measurements is found to be within 0.5 mm of mechanical and stereo photograph measurements of the ice accretion.

Hansman, R. John, Jr.↗

NASA NTRS1992

Results of an Icing test on a NACA 0012 airfoil in the NASA Lewis Icing Research Tunnel

Tests were conducted in the Icing Research Tunnel (IRT) at the NASA Lewis Research Center to document the current capability of the IRT, focused mainly on the repeatability of the ice shape over a range of icing conditions. Measurements of drag increase due to the ice accretion were also made to document the repeatability of drag. Surface temperatures of the model were obtained to show the effects of latent-heat release by the freezing droplets and heat transfer through the ice layer. The repeatability of the ice shape was very good at low temperatures, but only fair at near freezing temperatures. In general, drag data shows good repeatability.

Shin, Jaiwon↗

NASA NTRS1992

Results of an icing test on a NACA 0012 airfoil in the NASA Lewis Icing Research Tunnel

Shin, Jaiwon↗

NASA NTRS1994

Repeatability of ice shapes in the NASA Lewis icing research tunnel

Tests were conducted in the Icing Research Tunnel (IRT) at the NASA Lewis Research Center to document the current capability of the IRT, focused mainly on the repeatability of the ice shape over a range of icing conditions. Measurements of drag increase due to the ice accretion were also made to document the repeatability of drag. The repeatability of the ice shape was very good at low temperatures, but only fair at near freezing temperatures. In general, drag data shows good repeatability.

SHAPE REPEATABILITY↗

NASA NTRS2004

Validation of EOS Aqua AMSR Sea Ice Products for East Antarctica

This paper presents results from AMSR-E validation activities during a collaborative international cruise onboard the RV Aurora Australis to the East Antarctic sea ice zone (64-65 deg.S, 110-120 deg.E) in the early Austral spring of 2003. The validation strategy entailed an IS-day survey of the statistical characteristics of sea ice and snowcover over a Lagrangian grid 100 x 50 km in size (demarcated by 9 drifting ice beacons) i.e. at a scale representative of Ah4SR pixels. Ice conditions ranged h m consolidated first-year ice to a large polynya offshore from Casey Base. Data sets collected include: snow depth and snow-ice interface temperatures on 24 (?) randomly-selected floes in grid cells within a 10 x 50 km area (using helicopters); detailed snow and ice measurements at 13 dedicated ice stations, one of which lasted for 4 days; time-series measurements of snow temperature and thickness at selected sites; 8 aerial photography and thermal-IR radiometer flights; other satellite products (SAR, AVHRR, MODIS, MISR, ASTER and Envisat MERIS); ice drift data; and ancillary meteorological (ship-based, meteorological buoys, twice-daily radiosondes). These data are applied to a validation of standard AMSR-E ice concentration, snowcover thickness and ice-temperature products. In addition, a validation is carried out of ice-surface skin temperature products h m the NOAA AVHRR and EOS MODIS datasets.

Massom, Rob↗

NASA NTRS2006

Enhancing Icing Training for Pilots Through Web-Based Multimedia

The Aircraft Icing Project of the NASA Aviation Safety Program has developed a number of in-flight icing education and training aids designed to increase pilot awareness about the hazards associated with various icing conditions. The challenges and advantages of transitioning these icing training materials to a Web-based delivery are discussed. Innovative Web-based delivery devices increased course availability to pilots and dispatchers while increasing course flexibility and utility. These courses are customizable for both self-directed and instructor-led learning. Part of our goal was to create training materials with enough flexibility to enable Web-based delivery and downloadable portability while maintaining a rich visual multimedia-based learning experience. Studies suggest that using visually based multimedia techniques increases the effectiveness of icing training materials. This paper describes these concepts, gives examples, and discusses the transitional challenges.

Fletcher, William↗