Search NASA⌕ Search

SEARCH · Search NASA

Results for “Inelastic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

Evaluation of inelastic constitutive models for nonlinear structural analysis

The influence of inelastic material models on computed stress-strain states, and therefore predicted lives, was studied for thermomechanically loaded structures. Nonlinear structural analyses were performed on a fatigue specimen which had been subjected to thermal cycling in fluidized beds and on a mechanically load cycled benchmark notch specimen. Four incremental plasticity creep models (isotropic, kinematic, combined isotropic kinematic, combined plus transient creep) were exercised using the MARC program. Of the plasticity models, kinematic hardening gave results most consistent with experimental observations. Life predictions using the computed strain histories at the critical location with a strainrange partitioning approach considerably overpredicted the crack initiation life of the thermal fatigue specimen.

Kaufman, A.↗
NASA NTRS1981

Inelastic neutron scatter iron concentrations of the moon from orbital gamma ray data

The considered investigation is concerned with the relation between KREEP and thermal neutron flux depression. The Fe(n, n-prime gamma) concentrations of selected lunar regions were calculated by energy-band analysis of the 0.803-0.872 MeV band. The result of the investigation will be used to evaluate the reliability of the previously determined Fe(n, gamma) values. A 0.803-0.872 MeV band was isolated from the Apollo 15 and 16 orbital gamma ray spectra. Preliminary regression analysis of regional ground truth count rates and Fe concentrations showed this energy interval to be optimum for the 0.8467 MeV inelastic scatter (n, n-prime gamma)Fe peak.

Davis, P. A., Jr.↗
NASA NTRS1982

Cyclic-inelastic deformation and fatigue resistance of notched-thin aluminum plates

The results of experiments designed to develop data to assess the accuracy and utility of the critical location concept in applications of fatigue-crack nucleation analysis at notch roots are presented and discussed. Fully reversed and nonzero mean-stress data are presented over a range of lives which encompass both elastic and inelastic deformations for thin-notched specimens and smooth specimens made of 2024 T351 aluminum-alloy sheet. Notch-root strains were measured via an extensometer, whereas the formation of small cracks was detected via an eddy-current transducer. Data reported indicated the validity of the assumption that smooth and notched specimens form cracks at the same cycle number when identical deformation histories are imposed at their respective critical locations. They also serve to demonstrate the accuracy and utility of the critical-location approach in analysis to predict the formation of small cracks at notches in coupons and components.

Leis, B. N.↗
NASA NTRS1983

Evaluation of Inelastic Constitutive Models for Nonlinear Structural Analysis

The influence of inelastic material models on computed stress-strain states, and therefore predicted lives, was studied for thermomechanically loaded structures. Nonlinear structural analyses were performed on a fatigue specimen which was subjected to thermal cycling in fluidized beds and on a mechanically load cycled benchmark notch specimen. Four incremental plasticity creep models (isotropic, kinematic, combined isotropic-kinematic, combined plus transient creep) were exercised. Of the plasticity models, kinematic hardening gave results most consistent with experimental observations. Life predictions using the computed strain histories at the critical location with a Strainrange Partitioning approach considerably overpredicted the crack initiation life of the thermal fatigue specimen.

Kaufman, A.↗
NASA NTRS1983

Inelastic stress analyses at finite deformation through complementary energy approaches

A new hybrid-stress finite element algorithm, suitable for analyses of large, quasistatic, inelastic deformations, is presented. The algorithm is based upon a generalization of de Veubeke's (1972) complementary energy principle. The principal variables in the formulation are the nominal stress rate and spin, and the resulting finite element equations are discrete versions of the equations of compatibility and angular momentum balance. The algorithm produces true rates, time derivatives, as opposed to 'increments'. There results a boundary value problem (for stress rate and velocity) and an initial value problem (for total stress and deformation). A discussion of the numerical treatment of the boundary value problem is followed by a detailed examination of the numerical treatment of the initial value problem, covering the topics of efficiency, stability, and objectivity. The paper is closed with a set of examples, finite homogeneous deformation problems, which serve to bring out important aspects of the algorithm.

Atluri, S. N.↗
NASA NTRS1983

Analyses of large quasistatic deformations of inelastic bodies by a new hybrid-stress finite element algorithm

A new hybrid-stress finite element algorithm, suitable for analyses of large, quasistatic, inelastic deformations, is presented. The algorithm is base upon a generalization of de Veubeke's complementary energy principle. The principal variables in the formulation are the nominal stress rate and spin, and thg resulting finite element equations are discrete versions of the equations of compatibility and angular momentum balance. The algorithm produces true rates, time derivatives, as opposed to 'increments'. There results a complete separation of the boundary value problem (for stress rate and velocity) and the initial value problem (for total stress and deformation); hence, their numerical treatments are essentially independent. After a fairly comprehensive discussion of the numerical treatment of the boundary value problem, we launch into a detailed examination of the numerical treatment of the initial value problem, covering the topics of efficiency, stability and objectivity. The paper is closed with a set of examples, finite homogeneous deformation problems, which serve to bring out important aspects of the algorithm.

Reed, K. W.↗
NASA NTRS1983

Analyses of large quasistatic deformations of inelastic bodies by a new hybrid-stress finite element algorithm - Applications

A new hybrid-stress finite element algorithm suitable for analyzing large quasistatic deformations of inelastic solids is presented and its feasibility and performance are demonstrated with examples. The algorithm provides extremely accurate bifurcation analysis which is stable with respect to variation in the finite element mesh, so long as the same type of element is used in every mesh. When the mesh element is varied, the result changes in a predictable manner. The method does not necessarily lead to an upper or lower bound for the critical load. An explicit forward gradient scheme is used to improve stability and is shown to be useful also for elongation-dominated deformations. The application of the method to the onset of necking in plane extension and to deformation and stress in plane extension of an elasticoviscous fluid with an array of cylindrical voids is given in detail.

Reed, K. W.↗
NASA NTRS1986

Inelastic Analysis of Thermomechanically Cycled Structures

Simplified inelastic analysis computer program (ANSYMP) developed for predicting stress/strain history of thermomechanically cycled structure from an elastic solution. Program uses an iterative and incremental procedure to estimate plastic strains from material stress/strain properties and simulated plasticity hardening model. Program ANSYMP developed to simplify nonlinear structural analysis using only elastic solution as input data.

Kaufman, A.↗
NASA NTRS1982

The 3-D inelastic analysis methods for hot section components: Brief description

Advanced 3-D inelastic structural/stress analysis methods and solution strategies for more accurate yet more cost-effective analysis of components subjected to severe thermal gradients and loads in the presence of mechanical loads, with steep stress and strain gradients are being developed. Anisotropy, time and temperature dependent plasticity and creep effects are also addressed. The approach is to develop four different theories, one linear and three higher order theories (polynomial function, special function, general function). The theories are progressively more complex from linear to general function in order to provide streamlined analysis capability with increasing accuracy for each hot section component and for different parts of the same component according to the severity of the local stress, strain and temperature gradients associated with hot spots, cooling holes and surface coating cracks. To further enhance the computational effectiveness, the higher order theories will have embedded singularities (cooling passages, for example) in the generic modeling region. Each of the four theories consists of three formulation models derivable from independent theoretical formulations. These formulation models are based on: (1) mechanics of materials; (2) special finite elements; and (3) an advanced formulation to be recommended by the contractor.

Chamis, C. C.↗
NASA NTRS1985

Local strain redistribution corrections for a simplified inelastic analysis procedure based on an elastic finite-element analysis

Strain redistribution corrections were developed for a simplified inelastic analysis procedure to economically calculate material cyclic response at the critical location of a structure for life prediction proposes. The method was based on the assumption that the plastic region in the structure is local and the total strain history required for input can be defined from elastic finite-element analyses. Cyclic stress-strain behavior was represented by a bilinear kinematic hardening model. The simplified procedure predicts stress-strain response with reasonable accuracy for thermally cycled problems but needs improvement for mechanically load-cycled problems. Neuber-type corrections were derived and incorporated in the simplified procedure to account for local total strain redistribution under cyclic mechanical loading. The corrected simplified method was used on a mechanically load-cycled benchmark notched-plate problem. The predicted material response agrees well with the nonlinear finite-element solutions for the problem. The simplified analysis computer program was 0.3% of the central processor unit time required for a nonlinear finite-element analysis.

Kaufman, A.↗
NASA NTRS1985

On local total strain redistribution using a simplified cyclic inelastic analysis based on an elastic solution

Strain redistribution corrections were developed for a simplified inelastic analysis procedure to economically calculate material cyclic response at the critical location of a structure for life prediction purposes. The method was based on the assumption that the plastic region in the structure is local and the total strain history required for input can be defined from elastic finite element analyses. Cyclic stress-strain behavior was represented by a bilinear kinematic hardening model. The simplified procedure has been found to predict stress-strain response with reasonable accuracy for thermally cycled problems but needs improvement for mechanically load cycled problems. This study derived and incorporated Neuber type corrections in the simplified procedure to account for local total strain redistribution under cyclic mechanical loading. The corrected simplified method was exercised on a mechanically load cycled benchmark notched plate problem. Excellent agreement was found between the predicted material response and nonlinear finite element solutions for the problem. The simplified analysis computer program used 0.3 percent of the CPU time required for a nonlinear finite element analysis.

Hwang, S. Y.↗
NASA NTRS1985

Proton-air inelastic cross section at S(1/2) = 30 TeV

The distribution of the maxima of high energy cosmic ray induced extensive air showers in the atmosphere was measured as a function of atmospheric depth. From the exponential tail of this distribution, it was determined that the proton-air inelastic cross section at 30 TeV center-of-mass energy to be 540 + or - 40mb.

Baltrusaitis, R. M.↗
NASA NTRS1985

Estimation of the total inelasticity coefficient in interaction of greater than or equal to 20 TeV hadrons with lead

Experimental data on the interaction mean free path of hadrons with energy E 20 TeV in lead obtained with multilayer X-ray emulsion chambers(XEC) are compared with results of simulation of nuclear-electromagnetic cascades in lead chamber. It is shown that, to explain experimental data, the value of the inelasticity coefficients, K .8 should be assumed.

Kanevsky, B. L.↗
NASA NTRS1985

The method for the study of the inelastic cross-section for high energy protons by means of shower arrays with the large calorimetric area

Proton initiated showers could be reliably separated from showers initiated by cosmic ray nuclei by means of arrays with large calorimetric area, using distributions of energy fractions for EAS electromagnetic muon and hadron components. Proton initiated showers penetrate deeper into the atmosphere and have relatively lower energy fraction in muons. Distribution of that energy fraction is sensitive to the value of the proton inelastic cross-section. It is shown that the analysis of this distribution let one distinguish between log sup 2 S -rise and log S -rise of the cross-section at energies above 10 to the 15th power eV.

Danilova, T. V.↗
NASA NTRS1985

Ringlike inelastic events in cosmic rays and accelerators

In cosmic rays and in accelerators there were observed single inelastic processes with densely produced (azimuthally isotropic) groups of particles exhibiting spikes in the pseudorapidity plot of an individual event (i.e. ringlike events). Theoretically the existence of such processes was predicted as a consequence of Cerenkov gluon radiation or, more generally, of deconfinement radiation. Nowadays some tens of such events have been accumulated at 400 GeV and at 150 TeV. Analyzing ringlike events in proton-nucleon interactions at 400 GeV/c it is shown that they exhibit striking irregularity in the positions of pseudorapidity spikes' centers which tend to lie mostly at 55,90 and 125 deg in cms. It implies rather small deconfinement lengths of the order of some fermi.

Dremin, I. M.↗
NASA NTRS1985

Forward particle production in inelastic Ne-22 inteVractions in emulsion at 4.1 A Ge/c

The collisions of high energy nuclei are likely to be the subject of intense experimental investigation in the near future. The results are presented on multiple meson production in forward cone in inelastic interactions of Ne-22 nuclei in emulsion at a primary momentum 4.1 GeV/c per nucleon. The detailed characteristics of particle production and the fragmentation processes in collisions of Ne-22 nuclei in emulsion are described.

Source record↗