Search NASA⌕ Search

SEARCH · Search NASA

Results for “Interface engineering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Deposition-Dependent Coverage and Performance of Phosphonic Acid Interface Modifiers in Halide Perovskite Optoelectronics

In this work, we study the effect of various deposition methods for phosphonic acid interface modifiers commonly pursued as self-assembled monolayers in high-performance metal halide perovskite photovoltaics and light-emitting diodes. We compare the deposition of (2-(3,6-diiodo-9H-carbazol-9-yl)ethyl)phosphonic acid onto indium tin oxide (ITO) bottom contacts by varying three parameters: the method of deposition, specifically spin coating or prolonged dip coating; ITO surface treatment via HCl/FeCl3 etching; and use in combination with a second modifier, 1,6-hexylenediphosphonic acid. We demonstrate that varying these modification protocols can impact time-resolved photoluminescence carrier lifetimes and quasi-Fermi level splitting of perovskite films deposited onto the phosphonic acid-modified ITO. Ultraviolet photoelectron spectroscopy shows an increase in the effective work function after phosphonic acid modification and clear evidence for photoemission from carbazole functional groups at the ITO surface. We used X-ray photoelectron spectroscopy to probe differences in phosphonic acid coverage on the metal oxide contact and show that perovskite samples grown on ITO with the highest phosphonic acid coverage exhibit the longest carrier lifetimes. Finally, we establish that device performance follows these same trends. These results indicate that the reactivity, heterogeneity, and composition of the bottom contact help to control recombination rates and therefore power conversion efficiencies. ITO etching, prolonged deposition times for phosphonic acids via dip coating, and the use of a secondary, more hydrophilic bisphosphonic acid all contribute to improvements in surface coverage, carrier lifetime, and device efficiency. Furthermore, these improvements each have a positive impact, and we achieve the best results when all three strategies are implemented.

contact engineering↗
DOE OSTI2022

Solution-Deposited and Patternable Conductive Polymer Thin-Film Electrodes for Microbial Bioelectronics

Microbial bioelectronic devices integrate naturally occurring or synthetically engineered electroactive microbes with microelectronics. These devices have a broad range of potential applications, but engineering the biotic–abiotic interface for biocompatibility, adhesion, electron transfer, and maximum surface area remains a challenge. Prior approaches to interface modification lack simple processability, the ability to pattern the materials, and/or a significant enhancement in currents. We report a novel conductive polymer coating that significantly enhances current densities relative to unmodified electrodes in microbial bioelectronics is reported. The coating is based on a blend of poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) crosslinked with poly(2-hydroxyethylacrylate) (PHEA) along with a thin polydopamine (PDA) layer for adhesion to an underlying indium tin oxide (ITO) electrode. When used as an interface layer with the current-producing bacterium Shewanella oneidensis MR-1, this material produces a 178-fold increase in the current density compared to unmodified electrodes, a current gain that is higher than previously reported thin-film 2D coatings and 3D conductive polymer coatings. The chemistry, morphology, and electronic properties of the coatings are characterized and the implementation of these coated electrodes for use in microbial fuel cells, multiplexed bioelectronic devices, and organic electrochemical transistor based microbial sensors are demonstrated. It is envisioned that this simple coating will advance the development of microbial bioelectronic devices.

patterned bioelectronics↗
DOE OSTI2022

Controlled Growth and Chemical Engineering of FeSe‐Based Superconducting Films

Abstract Chemical engineering tailors functional materials to meet the demands of physical and chemical properties, accelerating materials discovery and design in a multidisciplinary field. However, stereotyped synthetic paradigms in physical and chemical approaches obstruct the effective integration of multiple advantages of respective materials exploration methods. Solid state reaction is often considered separately with wet chemistry synthesis route, such as film growth using physical vapor deposition and hydrothermal methods. Here, the controlled growth of FeSe thin films by physical deposition techniques followed by the chemical engineering to create heterogenous interface in FeSe films via a solution‐based environment is demonstrated. The two‐step route allows an expanded crystal structure and enhanced superconducting transition temperature from 3.6 to 38 K, providing a new strategy to design functional hybrid materials.

Huang, Yulong↗
DOE OSTI2023

Single molecule insights into interfacial molecular recognition for model electrochemical DNA biosensors

Electrochemical sensors that use surface-immobilized DNA to bind analytes and transduce the binding into electrochemical signals, have the potential for rapid, specific, and sensitive detection of bioanalytes via a compact and portable platform. However, accessing the structure of these surfaces/interfaces at the relevant spatial scale (< 10 nm), which determines the interfacial interactions and ultimately sensing performance, remains an unsolved challenge. Here, we review studies that have used high resolution atomic force microscope imaging and spatial statistical analysis tools to understand crowding interactions between thiolated DNA probes immobilized on gold electrodes and how such interactions impact target binding. We also review related studies that attempt to control the nanoscale spatial arrangement of the immobilized recognition elements to optimize sensing performance. Furthermore, these efforts have led to new advances in understanding of the structure-function relationships of DNA-based electrochemical biosensors to move the field toward rational engineering of these biosensing interfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Buried Interfaces in Organic Photocathodes for H 2 Evolution: Fermi-Level Pinning and Recombination

Herein, we demonstrate how Fermi-level pinning at buried contacts impacts solar fuel generation in all-polymer photocathodes by systematically comparing the effects of work function, hydroxyl coverage, and hydrogen evolution using chemically modified indium tin oxide (ITO) supports. Photovoltages and net photocathode performance are improved when the ITO is passivated using phosphonic acids, independent of work function, suggesting that the passivation reduces Fermi-level pinning at the buried interface arising from blended heterojunction interactions with surface metal hydroxyls. Transient photovoltage decay reveals differences in recombination mechanisms, supported by light intensity-dependent measurements. Briefly, nonpassivated, hydrophilic contacts exhibit trap-assisted recombination, while passivated, hydrophobic contacts follow bimolecular recombination. We then investigate changes in electroactivity of hole-transfer processes as a function of scan rate and repetitive cycling using a diffusion-controlled molecular redox probe, analogous to a hole-only device achieved via the electrolyte. The nonpassivated buried contacts exhibit higher overpotentials for oxidation, indicative of hole injection/extraction barriers. We observe irreversible electron transfer via the hole-transport level of the blended heterojunction and a strong cycle dependence, consistent with changes in the hole trap state density. Passivation results in more reversible redox behaviors, consistent with more Ohmic-like contacts. Collectively, these results provide context toward the realization of durable organic photoelectrodes with optimized photovoltages and net solar-to-hydrogen conversion efficiencies via fundamental understanding of the rates of carrier generation, recombination, and transport in high-dielectric aqueous environments and opportunities to characterize buried interfaces under device-relevant electric fields.

buried interfaces↗
DOE OSTI2020

Real-time observation of dynamic structure of liquid-vapor interface at nanometer resolution in electron irradiated sodium chloride crystals

The dynamics and structure of the liquid and vapor interface has remained elusive for decades due to the lack of an effective tool for directly visualization beyond micrometer resolution. Here, we designed a simple liquid-cell for encapsulating the liquid state of sodium for transmission electron microscopic (TEM) observation. The real-time dynamic structure of the liquid-vapor interface was imaged and videoed by TEM on the sample of electron irradiated sodium chloride (NaCl) crystals, a well-studied sample with low melting temperature and quantum super-shells of clusters. The nanometer resolution images exhibit the fine structures of the capillary waves, composed of first-time observed three zones of structures and features, i.e. flexible nanoscale fibers, nanoparticles/clusters, and a low-pressure area that sucks the nanoparticles from the liquid to the interface. Although the phenomenons were observed based on irradiated NaCl crystals, the similarities of the phenomenons to predictions suggest our real-time ovserved dynamic structure might be useful in validating long-debated theoretical models of the liquid-vapor interface, and enhancing our knowledge in understanding the non-equilibrium thermodynamics of the liquid-vapor interface to benefit future engineering designs in microfluidics.

36 MATERIALS SCIENCE↗
DOE OSTI2025

SHADOW4: the popular ray tracing revived for evolving synchrotron sources in fourth-generation storage rings

We present SHADOW4, a new version of the popular ray tracing code. The SHADOW kernel has been completely rewritten in Python applying modern concepts of software engineering. A new user interface is available in the OASYS ecosystem. The new tool has been designed and implemented preparing the future needs both in computing (cloud computing, AI integration) and in the transit to fourth generation sources and beyond.

Sanchez del Rio, Manuel↗
DOE OSTI2025

Decoupling Failure Pathways in Li-O 2 Cells Operated Under Lean Electrolyte Conditions

The operation of lithium-oxygen (Li-O 2 ) batteries under lean electrolyte conditions offers higher energy density but leads to rapid degradation and short cycle life. Although cathode passivation and electrolyte decomposition occur in all regimes, we show that under lean electrolyte conditions, failure is primarily driven by progressive electrolyte consumption at the lithium/solid electrolyte interphase (SEI), rather than by irreversible cathode passivation. Poor wetting of the lithium surface results in heterogeneous SEI growth and high local current densities, which accelerate electrolyte loss and cell failure. Strategies aimed at improving interfacial stability, including optimized wetting and SEI forming additives, significantly extend cycle life without compromising energy density. Our results establish anode-electrolyte interactions as the dominant degradation mechanism under lean electrolyte conditions, and emphasize the need to engineer a stable Li/SEI interface for long-lasting Li-O 2 batteries.

Córdoba, Daniel [Argonne National Laboratory (ANL)↗
DOE OSTI2024

A Modular 512-Channel Neural Signal Acquisition ASIC for High-Density 4096 Channel Electrophysiology

The complexity of information processing in the brain requires the development of technologies that can provide spatial and temporal resolution by means of dense electrode arrays paired with high-channel-count signal acquisition electronics. In this work, we present an ultra-low noise modular 512-channel neural recording circuit that is scalable to up to 4096 simultaneously recording channels. The neural readout application-specific integrated circuit (ASIC) uses a dense 8.2 mm × 6.8 mm 2D layout to enable high-channel count, creating an ultra-light 350 mg flexible module. The module can be deployed on headstages for small animals like rodents and songbirds, and it can be integrated with a variety of electrode arrays. The chip was fabricated in a TSMC 0.18 µm 1.8 V CMOS technology and dissipates a total of 125 mW. Each DC-coupled channel features a gain and bandwidth programmable analog front-end along with 14 b analog-to-digital conversion at speeds up to 30 kS/s. Additionally, each front-end includes programmable electrode plating and electrode impedance measurement capability. We present both standalone and in vivo measurements results, demonstrating the readout of spikes and field potentials that are modulated by a sensory input.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

Developing a Decision Support Engine to Enable Irrigation Modernization - Poster

Irrigation systems in the United States are some of the oldest continually utilized infrastructure in existence today, with some systems exceeding 100 years in age. They are operated to meet farming demands but are managed through a balance of varying influence: policies limiting water usage, stakeholder interests, and environmental impacts. Irrigation modernization is defined as a set of activities that update and improve existing irrigation systems, including, but not limited to improving water quantity, development of distributed energy resources for surrounding communities, ecosystem services, and improved agricultural yields. Modernizing an existing irrigation system can enable stakeholders to combat changing environmental and population demands but is difficult because the complexity involved in determining the potential benefits and consequences of irrigation modernization is high. We are combining a large amount of various geospatial, tabular, and temporal data with subject matter expertise into a decision support engine that will enable stakeholders to determine the benefits and consequences of irrigation modernization in their irrigation systems. A web-based GIS will allow the user to construct the modifications out of a palette of modernization options, which will be sent to the analytics engine for computations, and back to the web client for a graphical display and comparison of relevant metrics. Our development process involves four phases: 1) identify mechanisms of modernization, 2) identify data requirements, data streams, first principles and applicable algorithms necessary to quantify modernization mechanisms, 3) create ‘modules’ for each modernization mechanism, these modules will form the decision support engine, each capable of performing independently but can also inform other modules when needed, 4) Merge the decision support engine with a user interface, capable of ingesting user inputs and returning insights into the impacts of a modernization project as they relate to economic, environmental, monetary, and energy generation. Once complete, it is our intention that this tool will be fundamental in irrigation modernization projects, providing a strong analytical basis from which stakeholders can quickly make informed decisions regarding project development.

13 HYDRO ENERGY↗
DOE OSTI2023

Sodium electrochemical interfaces with NaSICON-type ceramics

The present invention is directed to the modification of sodium electrochemical interfaces to improve performance of NaSICON-type ceramics in a variety of electrochemical applications. Enhanced mating of the separator-sodium interface by means of engineered coatings or other surface modifications results in lower interfacial resistance and higher performance at increased current densities, enabling the effective operation of molten sodium batteries and other electrochemical technologies at low and high temperatures.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Understanding the stability of a plastic‐degrading Rieske iron oxidoreductase system

Abstract Rieske oxygenases (ROs) are a diverse metalloenzyme class with growing potential in bioconversion and synthetic applications. We postulated that ROs are nonetheless underutilized because they are unstable. Terephthalate dioxygenase (TPA DO PDB ID 7Q05 ) is a structurally characterized heterohexameric α 3 β 3 RO that, with its cognate reductase (TPA RED ), catalyzes the first intracellular step of bacterial polyethylene terephthalate plastic bioconversion. Here, we showed that the heterologously expressed TPA DO /TPA RED system exhibits only ~300 total turnovers at its optimal pH and temperature. We investigated the thermal stability of the system and the unfolding pathway of TPA DO through a combination of biochemical and biophysical approaches. The system's activity is thermally limited by a melting temperature ( T m ) of 39.9°C for the monomeric TPA RED , while the independent T m of TPA DO is 50.8°C. Differential scanning calorimetry revealed a two‐step thermal decomposition pathway for TPA DO with T m values of 47.6 and 58.0°C (Δ H = 210 and 509 kcal mol −1 , respectively) for each step. Temperature‐dependent small‐angle x‐ray scattering and dynamic light scattering both detected heat‐induced dissociation of TPA DO subunits at 53.8°C, followed by higher‐temperature loss of tertiary structure that coincided with protein aggregation. The computed enthalpies of dissociation for the monomer interfaces were most congruent with a decomposition pathway initiated by β‐β interface dissociation, a pattern predicted to be widespread in ROs. As a strategy for enhancing TPA DO stability, we propose prioritizing the re‐engineering of the β subunit interfaces, with subsequent targeted improvements of the subunits.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Competing mechanisms at vibrated interfaces of density-contrast fluids

Fluid-fluid interfacial instability and subsequent fluid mixing are ubiquitous in nature and engineering. The hydrodynamic instability of fluid interfaces has long centered on the pressure gradient-driven long-wavelength Rayleigh-Taylor instability and the resonance-induced short-wavelength Faraday instability. However, neither instability alone can explain the dynamics when both mechanisms are present. We identify a previously unseen multi-modal instability emerging from their coexistence. When the denser fluid is polydimethylsiloxane, the mixed region at a high density contrast (Atwood number = 0.9) spans a vibration amplitude range approximately twice the gravitational acceleration. Using Floquet stability analysis, we show how vibrations govern transitions between the RT and Faraday instabilities, leading to contention between these instabilities rather than resonant enhancement. Here, the initial transient growth is represented by the exponential modal growth of the most unstable Floquet exponent, along with its accompanying periodic behavior. Direct numerical simulations validate these findings and track interface breakup into the multiscale and nonlinear regimes. Specifically, we show that growing RT modes nonlinearly suppresses Faraday responses even when the initial growth rate of the Faraday instability is 3.63 times that of RT, so a bidirectional competition hinders their sustained coexistence.

Direct numerical simulations↗
DOE OSTI2026

Leadership at Interfaces: Capitalizing on the "Gaps" in Science, Technology and Education [Slides]

Leadership in the scientific enterprise is most commonly exemplified by those who commandeer major discoveries and critical breakthroughs that expand boundaries, naturally underpinning a competitive spirit among peers in the field. However, many other leadership opportunities exist at the interfaces of such boundaries - as well as at the interfaces of scientific disciplines, classes of professions and across generations - and may enable alternative guiding philosophies that are intrinsically less prone to competition and saturation, and perhaps appreciation. This presentation features a personal reflection of scientific and leadership philosophies that were intentionally manifested at, and by, irreplaceable interfaces of human creativity. Reaction engineering, an increasingly vanishing discipline within chemical engineering, is emphasized as a manifestation of interfacial leadership and serves as a vehicle to trace pivotal career moments in both the speaker's scientific discoveries and in his relational values within human enterprises.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Multiscale Characterization of the Influence of the Organic–Inorganic Interface on the Dielectric Breakdown of Nanocomposites

Nanoscale engineered materials such as nanocomposites can display or be designed to enhance their material properties through control of the internal interfaces. In this report we unveil the nanoscale origin and important characteristics of the enhanced dielectric breakdown capabilities of gold nanoparticle/polymer nanocomposites. Our multiscale approach spans from the study of a single chemically designed organic/inorganic interface to micrometer-thick films. At the nanoscale, we relate the improved breakdown strength to the interfacial charge retention capability by combining scanning probe measurements and density functional theory calculations. At the meso- and macroscales, our findings highlight the relevance of the nanoparticle concentration and distribution in determining and enhancing the dielectric properties, as well as identifying this as a crucial limiting factor for the achievable sample size.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Co 2 P-Pt Heterostructure Interfaces for Electrocatalytic Hydrogen Evolution

Pt-based electrocatalysts are effective for the hydrogen evolution reaction (HER); however, their limited ability to facilitate water dissociation and suboptimal hydrogen binding energy (H BE ) in alkaline electrolytes result in slow reaction kinetics, which hinders their cost-efficiency and practical applications. This study reports the synthesis of Co 2 P-Pt heterostructure nanorods using a seed-mediated growth method, producing a high density of Co 2 P-Pt interfacial sites. Density functional theory (DFT) calculations indicate that electronic interactions at these interfaces optimize H BE on Pt, while the interfacial sites promote water dissociation. The Co 2 P-Pt nanorods demonstrate an overpotential of 14 mV at 10 mA cm −2 for the HER, highlighting the potential of precisely engineered metal-metal phosphide interfaces for enhancing electrocatalytic efficiency.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Crosslink V.0.11.x User Manual

CrossLink is a novel two-dimensional and three-dimensional geometry and mesh generation software package developed by the Simulation Tools team at Los Alamos National Laboratory. This software represents the third generation of topology-based mesh generation technology developed by the Department of Defense and the Department of Energy with a special focus on complex multi-material hydrodynamic applications, mesh scalability, and high-order element mesh generation. The topology-based meshing approach offered by CrossLink enables users to quickly and easily mesh complex geometries in a repeatable and robust manner. CrossLink’s topology-based meshing approach is well-suited for parametric design studies, parametric design optimization, damage scenario assessment, and iterative design modification (i.e. feature addition and/or removal). CrossLink’s python API allows workflow scripting of the geometry creation and mesh generation process for traceability, repeatability, data provenance, and version control. CrossLink consists of three main components: a graphical user interface (GUI), a geometry creation and mesh generation engine, and a python API that provides a workflow scripting interface to the geometry and meshing functions.

97 MATHEMATICS AND COMPUTING↗