Search NASA⌕ Search

SEARCH · Search NASA

Results for “Kinetic Energy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Direct numerical simulation of a three-dimensional turbulent boundary layer

The effects of transverse strain on an initially two-dimensional turbulent boundary layer are studied in a direct numerical simulation of a planar channel flow with impulsively started transverse pressure gradient. Consistent with experiments in three-dimensional boundary layers, the simulation shows a decrease in the Reynolds shear stress with increasing transverse strain. Also, the directions of the Reynolds shear stress vector and the mean velocity gradient vector were found to differ. In addition, the simulation shows a drop in the turbulent kinetic energy. Terms in the Reynolds stress transport equations were computed. The balances indicate that the decrease in turbulent kinetic energy is a result of a decrease in turbulence production, along with an increase in turbulent dissipation. Intuitive reasoning and current turbulence models would predict an increase in kinetic energy along with increases in production and dissipation rates as a result of increased mean-flow strain rate. Later in the evolution of the flow, both turbulence production and dissipation increase.

Moin, P.↗
NASA NTRS1983

Cratering experiments in sands and a trial for general scaling law

The results of the vertical impacts of aluminum projectiles into quartz sand are reported. The impacts are at velocities of 35 to 830 m/sec with a single-stage powder gun. The morphology of craters formed in loose sands is generally conical, whereas that of craters formed in self-compacted sands varies with increasing impact velocity from a flat-floor type to a double-ring type. The present data, together with previous experimental data and the 'late-stage equivalence' of Dienes and Walsh, are seen as indicating that the crater diameter is expressed by a function of the 'late-stage effective energy' but not of the impact kinetic energy. The diameter of a crater formed in a noncohesive sand is found to be proportional to one-fourth the power of the late-state effective energy. For general impact cratering in a target with a finite strength, a relation is given between the velocity and the diameter, suggesting that there are four regimes in the crater diameter versus kinetic energy relation.

Mizutani, H.↗
NASA NTRS1972

Galactic cosmic ray modulation from 1965-1970.

Numerical solutions of the cosmic-ray equation of transport within the solar cavity and including the effects of diffusion, convection, and energy losses due to adiabatic deceleration, have been used to reproduce the modulation of galactic electrons, protons, and helium nuclei observed during the period from 1965 to 1970. Kinetic energies between 10 and 10,000 MeV/nucleon are considered. Computed and observed spectra are given for the years 1965, 1968, 1969, and 1970 together with the diffusion coefficients. These diffusion coefficients are assumed to be of separable form in rigidity and radial dependence, and are consistent with the available magnetic-field power spectra. The force-field solutions are given for these diffusion coefficients and galactic spectra and are compared with the numerical solutions. It is shown that the energy losses and convection lead to near-earth nuclei spectra at kinetic energies less than or equal to 100 MeV/nucleon in which the differential intensity is proportional to the kinetic energy with little dependence on the form of the galactic spectrum. This dependence is in agreement with the observed spectra of all species of atomic nuclei and it is argued that this provides strong observational evidence for the presence of energy losses in the propagation process, and for the exclusion of low-energy galactic nuclei from near earth.

Urch, I. H.↗
NASA NTRS2017

Mars Molniya Orbit Atmospheric Resource Mining

This NASA Innovative Advanced Concepts (NIAC) Phase I study examined the revolutionary concept of performing resource collection and utilization during Mars orbital operations in order to enable the landing of large payloads. An exploration architecture was developed, out of which several mission alternatives were developed. Concepts of operations were then developed for each mission alternative, followed by concepts for spacecraft systems, which were traded to assess their feasibility. A novel architecture using Mars Molniya Orbit Atmospheric Resource Mining is feasible to enable an Earth-independent and pioneering, permanent human presence on Mars by providing a reusable, single-stage-to-orbit transportation system. This will allow cargo and crew to be routinely delivered to and from Mars without transporting propellants from Earth.In Phase I, our study explored how electrical energy could be harnessed from the kinetic energy of the incoming spacecraft and then be used to produce the oxygen necessary for landing. This concept of operations is revolutionary in that its focus is on using in situ resources in complementary and varied forms: the upper atmosphere of Mars is used for aerocapture, which is followed by aerobraking, the kinetic energy of the spacecraft is transformed into usable electrical energy during aerobraking, and the atmospheric composition is the source of oxidizer for a landing under supersonic retropropulsion. This NASA Innovative Advanced Concepts (NIAC) Phase I study explores a novel mission architecture to establish routine, Earth-independent transfer of large mass payloads between Earth and the Mars surface and back to Mars orbit. The first stage of routine mission operations involves an atmospheric resource mining aerobraking campaign following aerocapture into a highly elliptical Mars orbit. During each pass through the atmosphere, the vehicle ingests the atmospheric oxidizer and stores it onboard, using solid oxide electrolysis to convert the primarily CO2 atmosphere into usable O2 for propellant. Power is made available through the use of magnetohydrodynamic energy generation, which converts the motion of the plasma in the shock later into usable electrical energy. Upon termination of the aerobraking sequence, the descent vehicle detaches from the orbit stack, deorbits, and executes the entry, descent, and landing sequence. Hypersonic deceleration is achieved via a deployable heat shield to lower the vehicle ballistic coefficient, and supersonic and subsonic deceleration are achieved via retropropulsion. Mars surface operations involve resource mining of the Martian regolith to produce CH4 and O2 propellant to be used for the subsequent MDAV ascent back to high Mars orbit (HMO) providing an apoapsis raise maneuver to initialize the aerobraking sequence, in addition to providing fuel from the Mars surface for EDL propulsive descent. The Resource Collector Vehicle (RCV), which is used for the orbital mining operations, is raised back to HMO via onboard deployable augmented solar electric propulsion. Concepts of operations were developed for each mission alternative, to evaluate between them and assess feasibility.

Mining↗
NASA NTRS1978

The entraining moist boundary layer

A unified theory of entrainment into the planetary boundary layer is presented. It is assumed that the rates of buoyant and shear production of turbulence kinetic energy can be determined in terms of the entrainment mass flux. An expression is derived from the conservation law for turbulence kinetic energy, which, with the introduction of an empirical parameter, can be used together with a second relation between turbulence kinetic energy and the turbulence velocity scale to obtain the mass entrainment flux. The theory provides descriptions of storage-limited entrainment, buoyancy-limited entrainment into a clear mixed layer, and shallowing. It has been incorporated into a simulation of Day 33 of the Wangara experiment using a simple mixed layer model.

Randall, D. A.↗
NASA NTRS1989

Identification of local modes using modal mass distributions

An approach for local modal identification using a modal mass spatial distribution matrix is proposed. This modal mass matrix is obtained by overlay multiplying the modal matrix to the product of the mass and the modal matrices of the structure. Each column in the spatial modal mass matrix can be interpreted as a measure of the kinetic energy distribution over the physical degrees of freedom for the corresponding mode. Local modes are identified due to the highly concentrated kinetic energy distribution in the localized regions. This spatial modal mass approach is more sensitive than the modal amplitude ratio method, since kinetic energy is in the quadratic form of modal amplitudes. Numerical examples involving identification of local modes using the proposed modal mass spatial distribution matrix approach are presented and discussed.

Chou, Chaur-Ming↗
NASA NTRS2006

Alpha-Voltaic Sources Using Liquid Ga as Conversion Medium

A family of proposed miniature sources of power would exploit the direct conversion of the kinetic energy of alpha particles into electricity. In addition to having long operational lives, these sources are expected to operate with energy-conversion efficiencies from 70 to 90 percent. A power source as proposed (see figure) would be an electrolytic cell in which liquid gallium would serve as both an electrolyte and an energy-conversion medium. The cell would contain an iridium cathode and a zirconium anode. The alpha particles, each with a kinetic energy approx.5.8 MeV, would be emitted by radioactive decay of Cm-244, which has a half-life of 18 years. The Cm-244 source would be positioned so that the a particles would enter the liquid gallium, where their kinetic energy would be dissipated mostly through ionization of Ga atoms, creating Ga(+) ions and free electrons. The electrons would be collected by iridium cathode, and the Ga(+) ions would be neutralized at the zirconium cathode by electrons returning after flowing through an external circuit. Gallium is a candidate for use as the electrolyte and the energy-conversion medium because in the liquid state it is a semimetal: its electrical conductivity is greater than that of a typical semiconductor but small in comparison with the conductivities of metals. Consequently, in liquid gallium, electrons and Ga(+) can exist without immediate recombination and can be moved by electric fields. It is expected that electric fields, resulting at least partly from the difference between the work functions of the electrode metals, would move the electrons and ions to their respective electrodes. The open-circuit potential of the cell is expected to be 1.62 V - equal to the difference between the work functions of iridium and zirconium. Unlike in a solid-state energy conversion medium, the impingement of energetic a particles would not give rise to displacement damage in the liquid gallium. Hence, the cell should have a long life, limited only by the half-life of Cm-244. A cell having a volume less than 25 cu mm, containing 1 curie of Cm-244 (the curie is a unit of radioactivity equal to 3.7 10(exp 10) disintegrations per second) is expected to deliver a current between 7 and 12 mA, which, at the expected open-circuit potential, would provide a power in the approximate range of 11 to 20 mW.

Patel, Jagdish U.↗
NASA NTRS1975

Atmospheric variations - Vacillations and index cycles

Zonal indices, momentum flux, and mean and perturbation kinetic energies of the Southern Hemisphere upper troposphere, derived from the EOLE constant density balloon data set, are found to possess strong 18-23 day variations which are statistically significant to a posteriori levels. Cross-spectra and phase relationships suggest that the variation appears as a barotropic interaction between the middle latitude mean westerlies and ultra large-scale perturbations. Long-period and high-amplitude variations in energy conversion between eddy and mean kinetic energies are found which average out in the long term mean to be very small and positive, consistent with previously measured average hemispheric energetics. Furthermore, the variation is shown to possess an ultra-long wave preference. Examination of two independent data sources, time series of total ozone and stratospheric thickness data from the Selective Chopper Radiometer, suggests that the periodicity is a property of general hemispheric motion rather than just a property of the EOLE data set.

Webster, P. J.↗
NASA NTRS2014

Direct Numerical Simulation of a Weakly Stratified Turbulent Wake

Direct numerical simulation (DNS) is used to investigate a time-dependent turbulent wake evolving in a stably stratified background. A large initial Froude number is chosen to allow the wake to become fully turbulent and axisymmetric before stratification affects the spreading rate of the mean defect. The uncertainty introduced by the finite sample size associated with gathering statistics from a simulation of a time-dependent flow is reduced, compared to earlier simulations of this flow. The DNS reveals the buoyancy-induced changes to the turbulence structure, as well as to the mean-defect history and the terms in the mean-momentum and turbulence-kinetic-energy budgets, that characterize the various states of this flow - namely the three-dimensional (essentially unstratified), non-equilibrium (or 'wake-collapse') and quasi-two-dimensional (or 'two-component') regimes observed elsewhere for wakes embedded in both weakly and strongly stratified backgrounds. The wake-collapse regime is not accompanied by transfer (or 'reconversion') of the potential energy of the turbulence to the kinetic energy of the turbulence, implying that this is not an essential feature of stratified-wake dynamics. The dependence upon Reynolds number of the duration of the wake-collapse period is demonstrated, and the effect of the details of the initial/near-field conditions of the wake on its subsequent development is examined.

Redford, J. A.↗
NASA NTRS2016

Reynolds-Stress and Triple-Product Models Applied to a Flow with Rotation and Curvature

Turbulence models, with increasing complexity, up to triple product terms, are applied to the flow in a rotating pipe. The rotating pipe is a challenging case for turbulence models as it contains significant rotational and curvature effects. The flow field starts with the classic fully developed pipe flow, with a stationary pipe wall. This well defined condition is then subjected to a section of pipe with a rotating wall. The rotating wall introduces a second velocity scale, and creates Reynolds shear stresses in the radial-circumferential and circumferential-axial planes. Furthermore, the wall rotation introduces a flow stabilization, and actually reduces the turbulent kinetic energy as the flow moves along the rotating wall section. It is shown in the present work that the Reynolds stress models are capable of predicting significant reduction in the turbulent kinetic energy, but triple product improves the predictions of the centerline turbulent kinetic energy, which is governed by convection, dissipation and transport terms, as the production terms vanish on the pipe axis.

Turbulence models↗
NASA NTRS2016

Reynolds-Stress and Triple-Product Models Applied to a Flow with Rotation and Curvature

Turbulence models, with increasing complexity, up to triple product terms, are applied to the flow in a rotating pipe. The rotating pipe is a challenging case for turbulence models as it contains significant rotational and curvature effects. The flowfield starts with the classic fully developed pipe flow, with a stationary pipe wall. This well defined condition is then subjected to a section of pipe with a rotating wall. The rotating wall introduces a second velocity scale, and creates Reynolds-shear stresses in the radial-circumferential and circumferential-axial planes. Furthermore, the wall rotation introduces a ow stabilization, and actually reduces the turbulent kinetic energy as the flow moves along the rotating wall section. It is shown in the present work that the Reynolds stress models are capable of predicting significant reduction in the turbulent kinetic energy, but triple product improves the predictions of the centerline turbulent kinetic energy, which is governed by convection, dissipation and transport terms, as the production terms vanish on the pipe axis.

Olsen, Michael E.↗
NASA NTRS1986

The velocity dispersion of the giant molecule clouds: A viscous origin

The observations of interstellar cloud motion show that the cloud velocity dispersion is nearly constant, to within a factor of 2, for clouds covering at least three orders of magnitude in mass. For example, the Giant Molecular Cloud (GMC) with typical masses of approx 5 x 10 to the 5th power solar masses have a one-dimensional planar, cloud-cloud, random velocity dispersion of approx 3-7 km/s. The HI clouds, of approx. 400 solar masses each, on the other hand, have a typical one-dimensional velocity dispersion of approx 6 km/s. Clearly, the clouds are not in kinetic energy equipartion. The GMC spatial distribution in the galactic disk is not that of an isolated, 3-D system; rather, the GMCs exhibit a very thin disk (approx nearly a monolayer) distribution; with the ratio of the diameter of a typical GMC to the vertical scale-height of the GMC distribution being approx 50 pc/150 pc = 0.3. The supernova shocks, which can accelerate the low mass clouds, are extremely ineffective in accelerating the GMCs because of the much larger mass/area ratio for the GMCs. The above points suggest that the GMCs do not constitute an isolated, 3-D system - rather, they indicate that the dynamics of the GMCs is mainly determined by the fact that they are located in a differentially rotating galactic disk, and that, as for particles in planetary rings, viscosity is the primary energy input. Specifically, it is proposed that gravitational scattering of the massive clouds off each other in the differentially rotating galactic disk constitutes an effective gravitational viscosity, which causes an increase in the random kinetic energy of the GMCs at the expense of their ordered, rotational kinetic energy.

Jog, C. J.↗
NASA NTRS1987

The decay of isotropic turbulence in a rapidly rotating frame

A direct numerical simulation of the decay of initially isotropic turbulence in a rapidly rotating frame was conducted. This 128 x 128 x 128 simulation was completed for a Reynolds number Re sub lambda = 15.3 and a Rossby number Ro sub lambda = 0.07 based on the initial turbulent kinetic energy and Taylor microscale. The numerical results indicate that the turbulence remains essentially isotropic during the major part of the decay (i.e., beyond the point where the turbulent kinetic energy has decayed to less than 10 percent of its initial value). The rapid rotation has the primary effect of shutting off the energy transfer so that the turbulence dissipation (and hence the rate of decay of the turbulent kinetic energy) is substantially reduced. Consequently, the anisotropy tensor remains essentially unchanged while the energy spectrum undergoes a nearly linear viscous decay (the same results that are predicted by Rapid Distortion Theory which is only formally valid for much shorter elapsed times. Surprisingly, no Taylor-Proudman reorganization of the flow to a two-dimensional state is observed. The implications that these results have on turbulence modeling are discussed briefly along with prospective future research.

Speziale, C. G.↗
NASA NTRS2002

Star formation and the initial mass function

Supersonic turbulence fragments the interstellar medium into dense sheets, filaments, cores and large low density voids, thanks to a complex network of highly radioactive shocks. The turbulence is driven on the large scale predominantly by super novae. While on large scale the magnetic energy is in approximate equipartition with the kinetic energy of the turbulence, on the scale of a few pc the turbulent kinetic energy exceeds the magnetic energy.

supersonic turbulence IMF initial mass function↗
NASA NTRS1981

A study of the interactions between large-scale coherent structures and fine-grained turbulence in a round jet

An approximate energy integral description is used to study the development of large-scale coherent structures in the technologically important problem of the round turbulent jet. The analysis begins from the radially integrated form of the kinetic energy equations of the mean flow, the large-scale structure and the fine-grained turbulence, which are obtained by using the usual Reynolds time average and a conditional average with reference to the frequency of the idealized monochromatic component of the large-scale wavelike structure. This is the basis for obtaining the amplitude equations for the three components of the flow in terms of the mean flow momentum thickness, the large-scale structure kinetic energy and the fine-grained turbulence kinetic energy across the jet.

Mankbadi, R.↗
NASA NTRS2004

Curing Composite Materials Using Lower-Energy Electron Beams

In an improved method of fabricating composite-material structures by laying up prepreg tapes (tapes of fiber reinforcement impregnated by uncured matrix materials) and then curing them, one cures the layups by use of beams of electrons having kinetic energies in the range of 200 to 300 keV. In contrast, in a prior method, one used electron beams characterized by kinetic energies up to 20 MeV. The improved method was first suggested by an Italian group in 1993, but had not been demonstrated until recently. With respect to both the prior method and the present improved method, the impetus for the use of electron- beam curing is a desire to avoid the high costs of autoclaves large enough to effect thermal curing of large composite-material structures. Unfortunately, in the prior method, the advantages of electron-beam curing are offset by the need for special walls and ceilings on curing chambers to shield personnel from x rays generated by impacts of energetic electrons. These shields must be thick [typically 2 to 3 ft (about 0.6 to 0.9 m) if made of concrete] and are therefore expensive. They also make it difficult to bring large structures into and out of the curing chambers. Currently, all major companies that fabricate composite-material spacecraft and aircraft structures form their layups by use of automated tape placement (ATP) machines. In the present improved method, an electron-beam gun is attached to an ATP head and used to irradiate the tape as it is pressed onto the workpiece. The electron kinetic energy between 200 and 300 keV is sufficient for penetration of the ply being laid plus one or two of the plies underneath it. Provided that the electron-beam gun is properly positioned, it is possible to administer the required electron dose and, at the same time, to protect personnel with less shielding than is needed in the prior method. Adequate shielding can be provided by concrete walls 6 ft (approximately equal to 1.8 m) high and 16 in. (approximately equal to 41 cm) thick, without a ceiling. The success of the present method depends on the use of a cationic epoxy as the matrix material in the prepreg tape, heating the prepreg tape to a temperature of 50 C immediately prior to layup, and exposing the workpiece to an electron-beam dose of approximately 2 Mrad. Experiments have shown that structures fabricated by the present method have the same mechanical properties as those of nominally identical structures fabricated by the prior method with electron beams of 3 to 4 MeV.

Byrne, Catherine A.↗
NASA NTRS1993

Direct numerical simulation of isotropic turbulence interacting with a weak shock wave

Direct numerical simulations are used to investigate the interaction of isotropic quasi-incompressible turbulence with a weak shock wave. A linear analysis of the interaction is conducted for comparison with the simulations. Both the simulations and the analysis show that turbulence is enhanced during the interaction. Turbulent kinetic energy and transverse vorticity components are amplified, and turbulent lengthscales are decreased. It is suggested that the amplification mechanism is primarily linear. Simulations also showed a rapid evolution of turbulent kinetic energy just downstream of the shock, a behavior not reproduced by the linear analysis. Analysis of the budget of the turbulent kinetic energy transport equation shows that this behavior can be attributed to the pressure transport term. Multiple compression peaks were found along the mean streamlines at locations where the local shock thickness had increased significantly.

Lee, Sangsan↗
NASA NTRS1986

Wavenumber spectra of Pacific winds measured by the Seasat scatterometer

Vector winds measured by the Seasat-A Satellite Scatterometer (SASS) are analyzed to determine the spatial structure of oceanic surface winds over wavelengths from 200 to 2200 km. The analysis is performed in four latitudinal bands in the Pacific Ocean. The salient features of the results are summarized as follows: (1) for each of the four geographic regions, the spectra of meridional and zonal wind components and of kinetic energy are consistent with a power-law dependence on wavenumber; for midlatitude regions in both the Northern and Southern hemispheres the wave-number dependence of kinetic energy is k exp -2.2, while for tropical regions in both hemispheres it is k exp-1.9, (2) for each individual region, the spectral dependence on wavenumber is nearly the same for both velocity components and for kinetic energy, (3) comparisons of zonal and meridional component spectra indicate that midlatitude winds may be isotropic, while tropical winds may be significantly anisotropic, and (4) the coherence between wind components is small everywhere.

Freilich, M. H.↗