Search NASA⌕ Search

SEARCH · Search NASA

Results for “LEAD OXIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Adjustment of threshold voltage in AlN/AlGaN/GaN high-electron mobility transistors by plasma oxidation and Al{sub 2}O{sub 3} atomic layer deposition overgrowth

We discuss possibilities of adjustment of a threshold voltage V{sub T} in normally off GaN high-electron mobility transistors (HEMTs) without compromising a maximal drain current I{sub DSmax}. Techniques of a low power plasma or thermal oxidation of 2-nm thick AlN cap over 3-nm thick AlGaN barrier are developed and calibrated for a thorough oxidation of the cap with a minimal density of surface donors at the inherent oxide-semiconductor interface. It has been shown that while a thermal oxidation technique leads to the channel and/or interface degradation, low density of surface donors and scalability of V{sub T} with additionally overgrown Al{sub 2}O{sub 3} may be obtained for plasma oxidized HEMTs. With 10-nm thick Al{sub 2}O{sub 3} deposited at 100 °C by atomic-layer deposition, we obtained V{sub T} of 1.6 V and I{sub DSmax} of 0.48 A/mm at a gate voltage of V{sub GS} = 8 V. Density of surface donors was estimated to be about 1.2 × 10{sup 13} cm{sup −2}, leaving most of the negative polarization charge at the semiconductor surface uncompensated. Further reduction of surface donors may be needed for even higher V{sub T}.

36 MATERIALS SCIENCE↗

D-Saccharic acid 1,4-lactone protects diabetic rat kidney by ameliorating hyperglycemia-mediated oxidative stress and renal inflammatory cytokines via NF-κB and PKC signaling

Increasing evidence suggests that oxidative stress is involved in the pathogenesis of diabetic nephropathy (DN) and this can be attenuated by antioxidants. D-Saccharic acid 1,4-lactone (DSL) is known for its detoxifying and antioxidant properties. Our early investigation showed that DSL can ameliorate alloxan (ALX) induced diabetes mellitus and oxidative stress in rats by inhibiting pancreatic β-cell apoptosis. In the present study we, therefore, investigated the protective role of DSL against renal injury in ALX induced diabetic rats. ALX exposure (at a dose of 120 mg/kg body weight, i. p., once) elevated the blood glucose level, serum markers related to renal injury, the production of reactive oxygen species (ROS), and disturbed the intra-cellular antioxidant machineries. Oral administration of DSL (80 mg/kg body weight) restored all these alterations close to normal. In addition, DSL could also normalize the aldose reductase activity which was found to increase in the diabetic rats. Investigating the mechanism of its protective activity, we observed the activation of different isoforms of PKC along with the accumulation of matrix proteins like collagen and fibronectin. The diabetic rats also showed nuclear translocation of NF-κB and increase in the concentration of inflammatory cytokines in the renal tissue. The activation of mitochondria dependent apoptotic pathway was observed in the diabetic rat kidneys. However, treatment of diabetic rats with DSL counteracted all these changes. These findings, for the first time, demonstrated that DSL could ameliorate renal dysfunction in diabetic rats by suppressing the oxidative stress related signalling pathways. - Highlights: ► Sustained hyperglycemia and oxidative stress lead to diabetic renal injury. ► D-saccharic acid 1,4-lactone prevents renal damage in alloxan-induced diabetes. ► It restores intra-cellular antioxidant machineries and kidney apoptosis. ► DSL reduces hyperglycemia-mediated oxidative stress via NF-kB and PKC signaling. ► DSL may act as a beneficial agent in hyperglycemia induced renal disorder.

60 APPLIED LIFE SCIENCES↗

Relationship of antioxidant and oxidative stress markers in different organs following copper toxicity in a rat model

Copper (Cu) at a higher level becomes toxic and it can catalyze the formation of highly reactive hydroxyl radical. We report the vulnerability of liver, kidney and brain to different dose of copper sulfate (CuSO{sub 4}) induced oxidative stress at different time duration. Fifty-four male Wistar rats (weight range = 205 ± 10 g) were equally divided into three groups. CuSO{sub 4} was administered orally to the experimental groups (Group-II and III) up to 90 days in a dose of 100 and 200 mg/Kg body weight per day. Saline water was given to the control group (Group-I). At the end of 30, 60 and 90 days of administration, neurobehavioral studies were done and six rats from each group were sacrificed. Their liver, kidney and brain tissues were subjected for Cu, glutathione (GSH), malondialdehyde (MDA) and total antioxidant capacity (TAC) assay. Blood urea nitrogen (BUN), serum creatinine, bilirubin and transaminases were measured. GSH, TAC and MDA levels were correlated with the markers of respective organ dysfunction. Administration of CuSO{sub 4} resulted in increased free Cu and MDA level, and decrease GSH and TAC levels in group-II and III compared with group-I. In experimental groups, the reduction in TAC and GSH levels was maximum in liver tissue followed by brain and kidney; whereas increase in MDA level was highest in liver followed by brain and kidney at 30, 60 and 90 days. TAC and GSH levels in the liver inversely correlated with serum transaminases and bilirubin, and tissue free Cu, and positively correlated with MDA levels. Free Cu level in kidney tissue and BUN inversely correlated with TAC and GSH, and positively with MDA level. Grip-strength, rotarod and Y-maze findings were inversely correlated with brain free Cu and MDA levels and positively with GSH and TAC levels. The oxidative stress was highest in liver followed by brain and kidney after oral CuSO{sub 4} exposure in a rat model. These levels correlated with the respective organ dysfunction and tissue free Cu concentration. - Highlights: • Oral dosing of CuSO{sub 4} leads to oxidative stress in liver, brain and kidney. • Liver has maximum oxidative stress followed by brain and kidney. • Oxidative stress correlated with the respective organ dysfunction and tissue Cu concentration.

60 APPLIED LIFE SCIENCES↗

Development of Highly Active Titania-Based Nanoparticles for Energetic Materials

Recent advances in nanostructured fuels and oxidizers may lead to high-performance energetic materials for propulsion, but these nanoparticulates present serious challenges due to their inherent instability and safety hazards and difficulty of manufacture. In this paper, we develop an alternate route, the use of nanoscale metal-oxides to catalyze reactions between micrometer-scale energetic constituents. Methods to synthesize TiO2-based nanoparticles that are highly active toward energetic reactions and effectively incorporate them into energetic composites are reported. Activity was maximized by tuning the physical and chemical properties of the nano-TiO2 dispersion in the composite. An 81% increase in combustion rate was achieved with a nanoparticle loading of 1 wt %, making energetically active nano-TiO2 a viable material for advanced propulsion, without the hazards and difficulties of competing technologies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Size‐Induced Ferroelectricity in Antiferroelectric Oxide Membranes

Abstract Despite extensive studies on size effects in ferroelectrics, how structures and properties evolve in antiferroelectrics with reduced dimensions still remains elusive. Given the enormous potential of utilizing antiferroelectrics for high‐energy‐density storage applications, understanding their size effects will provide key information for optimizing device performances at small scales. Here, the fundamental intrinsic size dependence of antiferroelectricity in lead‐free NaNbO 3 membranes is investigated. Via a wide range of experimental and theoretical approaches, an intriguing antiferroelectric‐to‐ferroelectric transition upon reducing membrane thickness is probed. This size effect leads to a ferroelectric single‐phase below 40 nm, as well as a mixed‐phase state with ferroelectric and antiferroelectric orders coexisting above this critical thickness. Furthermore, it is shown that the antiferroelectric and ferroelectric orders are electrically switchable. First‐principle calculations further reveal that the observed transition is driven by the structural distortion arising from the membrane surface. This work provides direct experimental evidence for intrinsic size‐driven scaling in antiferroelectrics and demonstrates enormous potential of utilizing size effects to drive emergent properties in environmentally benign lead‐free oxides with the membrane platform.

36 MATERIALS SCIENCE↗

Influence of Welding Speed on Zigzag Line Feature and Tensile Property of a Friction-Stir-Welded Al-Zn-Mg Aluminum Alloy

The zigzag line has significant and complicated effects on the mechanical properties of friction-stir-welded aluminum alloys. The zigzag line feature and its affecting characteristic on joint property are largely related to welding speed. In this paper, an Al-Zn-Mg aluminum alloy was butt friction-stir-welded, and the effects of welding speed on zigzag line feature and joint property were studied in detail in order to reveal the intrinsic correlations between the critical process parameter and the weld quality and, consequently, to provide guidance for the process optimization. The results indicate that at high welding speed of 300 mm/min, the loose and dilute distribution of the oxide layer fragments induces the relatively ambiguous zigzag line feature; the joint does not fail through the zigzag line during tensile test and shows superior tensile properties. With decreasing welding speed to 175 and 50 mm/min, the zigzag line feature is not weakened by the severer tool stirring action, as widely reported by previous studies, but is strengthened gradually due to the enhancement of the collective flow and more concentrated redistribution of broken oxide particles, leading to joint failure at zigzag lines and the degradation of tensile properties of joints.

36 MATERIALS SCIENCE↗

How Processing Atmosphere Influences the Evolution of GeO[subscript 2]-Embedded Germanium Nanocrystals Obtained from the Thermolysis of Phenyl Trichlorogermane-Derived Polymers

We report the influence of processing atmosphere on the evolution of oxide-embedded germanium nanocrystals (Ge-NCs) formed by the thermal processing of (C{sub 6}H{sub 5}GeO{sub 1.5}){sub n} sol-gel polymers. In an inert processing atmosphere (100% Ar), the generation of elemental Ge from thermally induced disproportionation of the germanium rich oxide (GRO) leads to GeO{sub 2}-embedded Ge-NCs whose size is independent of peak processing temperature and time. Processing in a slightly reducing atmosphere (5% H{sub 2}/95% Ar) activates a second Ge-NC formation and growth pathway, involving the reduction of Ge oxide species. Here, we report that the processing atmosphere governs the distribution of Ge species. By modifying the contributions from redistribution and reduction reactions within the GRO, diffusion of Ge atoms throughout the oxide matrix and formation and growth of Ge-NCs are impacted.

36 MATERIALS SCIENCE↗

Adsorption and Reaction of C(1)-C(3) Alcohols over CeO(x)(111) Thin Films

This study reports the interaction of methanol, ethanol, 1-propanol, and 2-propanol with well-ordered CeO{sub 2}(111) thin film surfaces. All of the alcohols adsorb at low temperature by forming alkoxy and hydroxyl species on the surface. On fully oxidized CeO{sub 2}(111), recombination occurs between some of the alkoxys and hydroxyls, resulting in alcohol desorption near 220 K. At the same temperature, some of the surface hydroxyls disproportionate to produce water and the loss of lattice O. The remaining alkoxys react above 550 K. The primary alcohols favor dehydrogenation products (aldehydes). There is a net loss of O from the system, resulting in a reduction of the ceria. The secondary alcohol, 2-propanol, undergoes primarily dehydration, producing propene with no net change in the cerium oxidation state. Reduced CeO{sub X}(111) competes with the gaseous products for available O. Little or no water is produced. The reaction selectivity for the C{sub 2} and C{sub 3} alcohols shifts toward favoring dehydration products. The loss of O from the alcohols leads to oxidation of the reduced ceria. Compared with the oxidized surface, the alkene desorption shifts to lower temperature, whereas the aldehyde desorption shifts to higher temperature. This indicates that, on the reduced surface, it is easier to break the C-O bond but more difficult to break the O-substrate bond.

10 SYNTHETIC FUELS↗

Adsorption and Reaction of C1-C3 Alcohols over CeOx(111) Thin Films

This study reports the interaction of methanol, ethanol, 1-propanol, and 2-propanol with well-ordered CeO{sub 2}(111) thin film surfaces. All of the alcohols adsorb at low temperature by forming alkoxy and hydroxyl species on the surface. On fully oxidized CeO{sub 2}(111), recombination occurs between some of the alkoxys and hydroxyls, resulting in alcohol desorption near 220 K. At the same temperature, some of the surface hydroxyls disproportionate to produce water and the loss of lattice O. The remaining alkoxys react above 550 K. The primary alcohols favor dehydrogenation products (aldehydes). There is a net loss of O from the system, resulting in a reduction of the ceria. The secondary alcohol, 2-propanol, undergoes primarily dehydration, producing propene with no net change in the cerium oxidation state. Reduced CeO{sub x}(111) competes with the gaseous products for available O. Little or no water is produced. The reaction selectivity for the C{sub 2} and C{sub 3} alcohols shifts toward favoring dehydration products. The loss of O from the alcohols leads to oxidation of the reduced ceria. Compared with the oxidized surface, the alkene desorption shifts to lower temperature, whereas the aldehyde desorption shifts to higher temperature. This indicates that, on the reduced surface, it is easier to break the C-O bond but more difficult to break the O-substrate bond.

10 SYNTHETIC FUELS↗

Synthesis of Interface-Driven Tunable Bandgap Metal Oxides

Mixed bandgap and bandgap tunability in semiconductors is critical in expanding their use. Composition altera-tions through single-crystal epitaxial growth and formation of multi-layer tandem structures are often employed to achieve mixed bandgaps albeit with limited tunability. In this study, self-assembled one-dimensional coordination polymers provide a fac-ile synthon and template for graphitic C-doped mesoporous oxides, gC-β-Ga 2 O 3 or gC-In 2 O 3 via controlled oxidative ligand ablation. These materials have mixed bandgaps, and colors, depending on amount of gC present. The carbon-oxide interface leads to induced gap states, hence, a stoichiometrically tunable band structure. Structurally, a multi-scale porous network percolating throughout the material is realized. The nature of heat-treatment and top-down process allows for facile tunabil-ity and formation of mixed bandgap metal oxides through controlled carbon deposition. As a proof of concept, gC-β-Ga 2 O 3 was utilized as a photocatalyst for CO 2 reduction, which demonstrated excellent selectivity and conversion rates into CH 4 and CO.

36 MATERIALS SCIENCE↗

Microstructure Experiments-Enabled MARMOT Simulations of SiC/SiC-based Accident Tolerant Nuclear Fuel System

We have undertaken an experimental-computational project that addresses a few key technology gaps associated with the use of SiC/SiC composites for light water reactor fuel cladding. Two principal endeavors in this project are to assess the irradiation-induced microstructural changes and swelling in SiC/SiC composites, and to characterize and model the porous oxide surface layer (when exposed to steam) along SiC recession that is detrimental to the clad integrity under accident conditions. The project tasks are: (i) ion irradiation and characterization (University of Tennessee, Knoxville), (ii) mechanical tests and analysis (University of South Carolina), (iii) steam exposure tests (Oak Ridge National Laboratory), (iv) electron microscopy and spectroscopic characterization (NC State University), (v) x-ray microscopy and reconstruction (University of South Carolina and NC State University), (vi) phase field modeling and simulations (NC State University and Idaho National Laboratory). The effects of 10 MeV Au ion irradiation at 350°C on the microstructure evolution in SiC/SiC composites are investigated at doses up to 400 displacements per atom (dpa) at the University of Tennessee, Knoxville. Atomic force microscopy and optical profilometry reveal irradiation induced axial and radial shrinkage of the fibers for doses greater than 10 dpa. Based on detailed electron microscopy characterization, the primary cause of the fiber shrinkage is attributed to irradiation-induced loss of carbon packets. Additionally, the multilayer PyC interface is observed to portray high resistance to irradiation damage. The mechanical response and failure mechanisms of un-irradiated samples is also assessed through loading tests and X-ray imaging at the University of South Carolina. Steam exposure tests are performed at the Oak Ridge National Laboratory in a facility that represents a reactor pressure vessel under a loss-of-coolant-accident scenario. The samples that are analyzed methodically in this report are tested for 32/31 hours at 1200°C with a velocity of 0.25 cm/s for the pressures: 0.1 MPa, 0.45 MPa, 0.92 MPa and 1.38 MPa. Scanning/transmission electron microscopy analysis conducted at the NC State University (NCSU) shows that the oxide layer thickness increases with the steam pressure. While the oxide layer is crystalline (α- cristobalite) for the pressures 0.45 MPa, 0.92 MPa and 1.38 MPa, the layer is amorphous at 0.1 MPa. Results from Raman spectroscopy have also confirmed the formation of α-cristobalite phase of SiO₂. The abrupt increase in the integrated Raman intensity ratio between steam pressures 0.1 and 0.45 MPa suggests the onset of accelerated crystallization. Non-destructive three dimensional X-ray microscopy/tomography (XCT) and computational image processing techniques are employed by the University of South Carolina to probe the porous oxidation features on SiC samples at varying pressures. Interestingly, most pores are observed to be located away from the surface as well as the oxide-SiC interface. The average oxide layer thickness assessed from the XCT analysis is seen to be in excellent agreement with the values determined through scanning electron microscopy analysis for the highest pressures where the oxide layer is relatively more uniform. A phase-field model developed by the NC State University and Idaho National Laboratory for simulating oxidation of SiC by steam captures the paralinear kinetics of SiC oxidation with a high degree of fidelity. Results from quasi-one-dimensional and two dimensional simulations show that the pores with oxidizing species lead to a higher volatilization rate. These simulations indicate that the enhanced apparent volatilization rates at higher pressures observed in experiments can be rationalized by the increased volatilization from the pores. The project team has also successfully developed the capability to import images from experiments for realistic evolution of the oxidizing microstructure.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A protected annealing strategy to enhanced light emission and photostability of YAG:Ce nanoparticle-based films

A significant obstacle in the development of YAG:Ce nanoparticles as light converters in white LEDs and as biological labels is associated with the difficulty of finding preparative conditions that allow simultaneous control of structure, particle size and size distribution, while maintaining the optical properties of bulk samples. Preparation conditions frequently involve high-temperature treatments of precursors (up to 1400 C), which result in increased particle size and aggregation, and lead to oxidation of Ce(III) to Ce(IV). We report here a process that we term protected annealing, that allows the thermal treatment of preformed precursor particles at temperatures up to 1000 C while preserving their small size and state of dispersion. In a first step, pristine nanoparticles are prepared by a glycothermal reaction, leading to a mixture of YAG and boehmite crystalline phases. The preformed nanoparticles are then dispersed in a porous silica. Annealing of the composite material at 1000 C is followed by dissolution of the amorphous silica by hydrofluoric acid to recover the annealed particles as a colloidal dispersion. This simple process allows completion of YAG crystallization while preserving their small size. The redox state of Ce ions can be controlled through the annealing atmosphere. The obtained particles of YAG:Ce (60 {+-} 10 nm in size) can be dispersed as nearly transparent aqueous suspensions, with a luminescence quantum yield of 60%. Transparent YAG:Ce nanoparticle-based films of micron thickness can be deposited on glass substrates using aerosol spraying. Films formed from particles prepared by the protected annealing strategy display significantly improved photostability over particles that have not been subject to such annealing.

36 MATERIALS SCIENCE↗

Electrical properties of thermal oxide scales on pure iron in liquid lead-bismuth eutectic

Here, the impedance behavior of pre-oxidized iron in liquid lead-bismuth eutectic (LBE) at 200 °C is studied using electrochemical impedance spectroscopy. The structures and resistance of oxide grown on iron oxidized in air at different temperatures and durations are compared. The results show that the resistance of the oxide film increases with increasing oxidizing temperature, due to the formation of a thicker scale and fewer defects. At the same temperature (600 °C), increasing the oxidation time can also reduce the defect concentration in the oxide film and improve the impedance of the oxide scale in LBE.

42 ENGINEERING↗

Formulation and validation of a reduced order model of 2D materials exhibiting a two-phase microstructure as applied to graphene oxide [Formulation and validation of a reduced order model of 2D materials exhibiting a two-phase microstructure]

Novel 2D materials, e.g., graphene oxide (GO), are attractive building blocks in the design of advanced materials due to their reactive chemistry, which can enhance interfacial interactions while providing good in-plane mechanical properties. Recent studies have hypothesized that the randomly distributed two-phase microstructure of GO, which arises due to its oxidized chemistry, leads to differences in nano- vs meso–scale mechanical responses. However, this effect has not been carefully studied using molecular dynamics due to computational limitations. Herein, a continuum mechanics model, formulated based on density functional based tight binding (DFTB) constitutive results for GO nano-flakes, is establish for capturing the effect of oxidation patterns on the material mechanical properties. GO is idealized as a continuum heterogeneous two-phase material, where the mechanical response of each phase, graphitic and oxidized, is informed from DFTB simulations. A finite element implementation of the model is validated via MD simulations and then used to investigate the existence of GO representative volume elements (RVE). We find that for the studied GO, an RVE behavior arises for monolayer sizes in excess to 40 nm. Moreover, we reveal that the response of monolayers with two main different functional chemistries, epoxide-rich and hydroxyl–rich, present distinct differences in mechanical behavior. In addition, we explored the role of defect density in GO, and validate the applicability of the model to larger length scales by predicting membrane deflection behavior, in close agreement with previous experimental and theoretical observations. As such the work presents a reduced order modeling framework applicable in the study of mechanical properties and deformation mechanisms in 2D multiphase materials.

36 MATERIALS SCIENCE↗

A new continuous two-step molecular precursor route to rare-earth oxysulfides Ln{sub 2}O{sub 2}S

A continuous two-step molecular precursor pathway is designed for the preparation of rare-earth oxysulfides Ln{sub 2}O{sub 2}S (Ln=Y, La, Pr, Nd, Sm-Lu). This new route involves a first oxidation step leading to the rare-earth oxysulfate Ln{sub 2}O{sub 2}SO{sub 4} which is subsequently reduced to the rare-earth oxysulfide Ln{sub 2}O{sub 2}S by switching to a H{sub 2}-Ar atmosphere. The whole process occurs at a temperature significantly lower than usual solid state synthesis (T{<=}650 Degree-Sign C) and avoids the use of dangerous sulfur-based gases, providing a convenient route to the synthesis of the entire series of Ln{sub 2}O{sub 2}S. The molecular precursors consist in heteroleptic dithiocarbamate complexes [Ln(Et{sub 2}dtc){sub 3}(phen)] and [Ln(Et{sub 2}dtc){sub 3}(bipy)] (Et{sub 2}dtc=N,N-diethyldithiocarbamate; phen=1,10-phenanthroline; bipy=2,2 Prime -bipyridine) and were synthesized by a new high yield and high purity synthesis route. The nature of the molecular precursor determines the minimum synthesis temperature and influences therefore the purity of the final Ln{sub 2}O{sub 2}S crystalline phase. - Graphical abstract: A continuous two-step molecular precursor pathway was designed for the preparation of rare-earth oxysulfides Ln{sub 2}O{sub 2}S (Ln=Y, La, Pr, Nd, Sm-Lu), starting from heteroleptic dithiocarbamate complexes. The influence of the nature of the molecular precursor on the minimum synthesis temperature and on the purity of the final Ln{sub 2}O{sub 2}S crystalline phase is discussed. Highlights: Black-Right-Pointing-Pointer A new high yield and high purity synthesis route of rare earth dithiocarbamates is described. Black-Right-Pointing-Pointer These compounds are used as precursors in a continuous process leading to rare-earth oxysulfides. Black-Right-Pointing-Pointer The oxysulfides are obtained under much more moderate conditions than previously described.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Preparation and crystal structure of a new tin titanate containing Sn{sup 2+}; Sn{sub 2}TiO{sub 4}

Single crystals of a new tin titanate containing Sn{sup 2+}, Sn{sub 2}TiO{sub 4} was prepared by high temperature reaction in an evacuated quartz tube and its crystal structure was determined by single crystal X-ray diffraction data. The tin titanate crystallizes in the tetragonal space group P4{sub 2}/mbc with a = 8.490(2) and c = 5.923(3) A, Z = 4 and the final R factors are R = 0.0497 and R{sub w} = 0.0676 for 354 unique reflections. This tin titanate is isostructural with the low temperature form of Pb{sub 3}O{sub 4}(Pb{sub 2}{sup 2+}Pb{sup 4+}O{sub 4}). This compound was oxidized above 600 deg. C accompanying the mass gain and finally changed to rutile-type solid solution (Sn,Ti)O{sub 2}.

36 MATERIALS SCIENCE↗

Epitaxial stabilization of -Fe2O3 (00l) thin films on SrTiO3 (111)

Thin films of the metastable and elusive -Fe2O3 have been epitaxially stabilized on SrTiO3 (111) substrates. The -Fe2O3 films present a (001) orientation perpendicular to the substrate and three in-plane domains measuring a few nanometers and showing atomically sharp interfaces. We argue that this domain structure, rather than the epitaxial-strain, plays an essential role in stabilizing the -Fe2O3 by minimizing the energy of (100) surfaces. The -Fe2O3 films show a large in-plane coercivity 8 kOe which combined with the magnetoelectric character claimed for this oxide may lead to novel applications in spintronics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗