Search NASA⌕ Search

SEARCH · Search NASA

Results for “Lateral interactions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Design of a simulation environment for laboratory management by robot organizations

This paper describes the basic concepts needed for a simulation environment capable of supporting the design of robot organizations for managing chemical, or similar, laboratories on the planned U.S. Space Station. The environment should facilitate a thorough study of the problems to be encountered in assigning the responsibility of managing a non-life-critical, but mission valuable, process to an organized group of robots. In the first phase of the work, we seek to employ the simulation environment to develop robot cognitive systems and strategies for effective multi-robot management of chemical experiments. Later phases will explore human-robot interaction and development of robot autonomy.

Zeigler, Bernard P.↗

Experimental and analytical study on fluid whirl and fluid whip modes

Fluid whirl and fluid whip are rotor self-excited, lateral vibrations which occur due to rotor interactions with the surrounding fluid. There exist various modes of fluid whirl and fluid whip. These modes are close to rotor modes corresponding to free vibrations (based on the linear model). Small differences are due to nonlinearities in the system. This paper presents experimental and analytical results on the lowest modes of fluid whirls and fluid whip. Examples of rotors supported in fluid lubricated bearings show the variations of rotor deflection amplitudes and phases in the whirl and whip modes with changes of rotative speeds and/or changes in lumped mass locations along the shaft.

Muszynska, Agnes↗

Principles of Design for Substrate-Supported Molecular Switches Based on Physisorbed and Chemisorbed States

The physisorbed (precursor) and chemisorbed states of a molecule on metal surfaces can be utilized to build a logic switch at the single-molecule level, enabling further microminiaturization of electronic devices beyond the silicon limits. However, a serious drawback of this design is easy lateral diffusion of the molecule in the physisorbed state, which may destroy the normal switch operation. Here, we demonstrate that anchoring engineering can be an effective way to enhance the stability of molecular switches without degrading switching functionality. As exemplified by trans -ADT on Cu(111), we show that the lateral diffusion of such molecular switch can be obstructed by the anchoring of the ending thiophene groups, along with a rotation of the adsorbate during the switching process. More general, our results also suggest that when searching for molecular switches with reversible physisorbed and chemisorbed states with excellent bistability and lateral stability, the focus should be on finding molecules with a moderate HOMO–LUMO energy gap and anchoring atoms with positive charge that can then be deposited on substrates with which they interact moderately. Furthermore, this allows further improvement of the lateral and vertical stability of such a molecular switch by substituting the thiophene groups with selenophene, thus establishing trans -ADS on Cu(111) as a promising switch.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Wind Tunnel Measurements and Calculations of Aerodynamic Interactions Between Tiltrotor Aircraft

Wind tunnel measurements and calculations of the aerodynamic interactions between two tiltrotor aircraft in helicopter mode are presented. The measured results include the roll moment and thrust change on the downwind aircraft, as a function of the upwind aircraft position (longitudinal, lateral, and vertical). Magnitudes and locations of the largest interactions are identified. The calculated interactions generally match the measurements, with discrepancies attributed to the unsteadiness of the wake and aerodynamic forces on the airframe. To interpret the interactions in terms of control and power changes on the aircraft, additional calculations are presented for trimmed aircraft with gimballed rotors.

Johnson, Wayne↗

Fluorophilic Sigma(σ)‐Lock Self‐Healable Copolymers

Abstract Although F‐Containing molecules and macromolecules are often used in molecular biology to increase the binding with Lewis acidic groups by introducing favorable C−F dipoles, there is virtually no experimental evidence and limited understanding of the nature of these interactions, especially their role in synthetic polymeric materials. These studies elucidate the molecular origin of inter‐ and intra‐Chain interactions responsible for self‐healing of F‐Containing copolymers composed of pentafluorostyrene and n‐butyl acrylate units (p(PFS/nBA). Guided by dynamic surface oscillating force (SOF) and spectroscopic measurements supported by molecular dynamics (MD) simulations, these studies show that the reformation of σ‐σ orbitals in −C−F of PFS and CH 3 CH 2 − of nBA units enables the recovery of entropic energy via fluorophilic‐σ‐lock van der Waals forces when PFS/nBA molar ratios are ~50/50. The strength of these interactions determined experimentally for self‐healable PFS/nBA compositions is in the order ~0.3 kcal/mol which primarily comes from fluorophilic‐σ‐lock (~70 %) contributions. These interactions are significantly diminished for non‐self‐healable counterparts. Strongly polarized −C−F σ orbitals create lateral dipolar forces enhancing the affinity towards −C−H orbitals, facilitating energetically favorable interactions. Entropic recovery driven by non‐Covalent bonding offers a valuable tool in designing materials with unique functionalities, particularly self‐healable batteries and energy storage devices.

Gaikwad, Samruddhi↗

Fluorophilic Sigma(σ)‐Lock Self‐Healable Copolymers

Although F-Containing molecules and macromolecules are often used in molecular biology to increase the binding with Lewis acidic groups by introducing favorable C−F dipoles, there is virtually no experimental evidence and limited understanding of the nature of these interactions, especially their role in synthetic polymeric materials. These studies elucidate the molecular origin of inter- and intra-Chain interactions responsible for self-healing of F-Containing copolymers composed of pentafluorostyrene and n-butyl acrylate units (p(PFS/nBA). Guided by dynamic surface oscillating force (SOF) and spectroscopic measurements supported by molecular dynamics (MD) simulations, these studies show that the reformation of σ-σ orbitals in −C−F of PFS and CH 3 CH 2 − of nBA units enables the recovery of entropic energy via fluorophilic-σ-lock van der Waals forces when PFS/nBA molar ratios are ~50/50. The strength of these interactions determined experimentally for self-healable PFS/nBA compositions is in the order ~0.3 kcal/mol which primarily comes from fluorophilic-σ-lock (~70 %) contributions. These interactions are significantly diminished for non-self-healable counterparts. Strongly polarized −C−F σ orbitals create lateral dipolar forces enhancing the affinity towards −C−H orbitals, facilitating energetically favorable interactions. Entropic recovery driven by non-Covalent bonding offers a valuable tool in designing materials with unique functionalities, particularly self-healable batteries and energy storage devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Lateral excitonic switching in vertically stacked quantum dots

We show that the application of a vertical electric field to the Coulomb interacting system in stacked quantum dots leads to a 90° in-plane switching of charge probability distribution in contrast to a single dot, where no such switching exists. Results are obtained using path integral quantum Monte Carlo with realistic dot geometry, alloy composition, and piezo-electric potential profiles. The origin of the switching lies in the strain interactions between the stacked dots hence the need for more than one layer of dots. The lateral polarization and electric field dependence of the radiative lifetimes of the excitonic switch are also discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Multivalent ions induce lateral structural inhomogeneities in polyelectrolyte brushes

Subtle details about a polyelectrolyte’s surrounding environment can dictate its structural features and potential applications. Atomic force microscopy (AFM), surface forces apparatus (SFA) measurements, and coarse-grained molecular dynamics simulations are combined to study the structure of planar polyelectrolyte brushes [poly(styrenesulfonate), PSS] in a variety of solvent conditions. More specifically, AFM images provide a first direct visualization of lateral inhomogeneities on the surface of polyelectrolyte brushes collapsed in solutions containing trivalent counterions. These images are interpreted in the context of a coarse-grained molecular model and are corroborated by accompanying interaction force measurements with the SFA. Our findings indicate that lateral inhomogeneities are absent from PSS brush layers collapsed in a poor solvent without multivalent ions. Together, AFM, SFA, and our molecular model present a detailed picture in which solvophobic and multivalent ion–induced effects work in concert to drive strong phase separation, with electrostatic bridging of polyelectrolyte chains playing an essential role in the collapsed structure formation.

42 ENGINEERING↗

Scale disparity and spectral transfer in anisotropic numerical turbulence

To study the effect of cancellations within long-range interactions on local isotropy at the small scales, we calculate explicitly the degree of cancellation in distant interactions in the simulations of Yeung & Brasseur and Yeung, Brasseur & Wang using the single scale disparity parameter 's' developed by Zhou. In the simulations, initially isotropic simulated turbulence was subjected to coherent anisotropic forcing at the large scales and the smallest scales were found to become anisotropic as a consequence of direct large-small scale couplings. We find that the marginally distant interactions in the simulation do not cancel out under summation and that the development of small-scale anisotropy is indeed a direct consequence of the distant triadic group, as argued by Yeung, et. al. A reduction of anisotropy at later times occurs as a result of the isotropizing influences of more local energy-cascading triadic interactions. Nevertheless, the local-to-nonlocal triadic group persists as an isotropizing influence at later times. We find that, whereas long-range interactions, in general, contribute little to net energy transfer into or out of a high wavenumber shell k, the anisotropic transfer of component energy within the shell increases with increasing scale separations. These results are consistent with results by Zhou, and Brasseur & Wei, and suggest that the anisotropizing influences of long range interactions should persist to higher Reynolds numbers. The residual effect of the forced distant group in this low-Reynolds number simulation is found to be forward cascading, on average.

Zhou, YE↗

Single-layer MoS{sub 2} roughness and sliding friction quenching by interaction with atomically flat substrates

We experimentally study the surface roughness and the lateral friction force in single-layer MoS{sub 2} crystals deposited on different substrates: SiO{sub 2}, mica, and hexagonal boron nitride (h-BN). Roughness and sliding friction measurements are performed by atomic force microscopy. We find a strong dependence of the MoS{sub 2} roughness on the underlying substrate material, being h-BN the substrate which better preserves the flatness of the MoS{sub 2} crystal. The lateral friction also lowers as the roughness decreases, and attains its lowest value for MoS{sub 2} flakes on h-BN substrates. However, it is still higher than for the surface of a bulk MoS{sub 2} crystal, which we attribute to the deformation of the flake due to competing tip-to-flake and flake-to-substrate interactions.

36 MATERIALS SCIENCE↗

Interactions among hydraulic conductivity distributions, subsurface topography, and transport thresholds revealed by a multitracer hillslope irrigation experiment

Interactions among hydraulic conductivity distributions, subsurface topography, and lateral flow are poorly understood. We applied 407 mm of water and a suite of tracers over 51 h to a 12 by 16.5 m forested hillslope segment to determine interflow thresholds, preferential pathway pore velocities, large-scale conductivities, the time series of event water fractions, and the fate of dissolved nutrients. The 12% hillslope featured loamy sand A and E horizons overlying a sandy clay loam Bt at 1.25 m average depth. Interflow measured from two drains within an interception trench commenced after 131 and 208 mm of irrigation. Cumulative interflow equaled 49% of applied water. Conservative tracer differences between the collection drains indicated differences in flow paths and storages within the plot. Event water fractions rose steadily throughout irrigation, peaking at 50% sixteen h after irrigation ceased. Data implied that tightly held water exchanged with event water throughout the experiment and a substantial portion of preevent water was released from the argillic layer. Surface-applied dye tracers bypassed the matrix, with peak concentrations measured shortly after flow commencement, indicating preferential network conductivities of 864–2240 mm/h, yet no macropore flow was observed. Near steady-state flow conditions indicated average conductivities of 460 mm/h and 2.5 mm/h for topsoils and the Bt horizon, respectively. Low ammonium and phosphorus concentrations in the interflow suggested rapid uptake or sorption, while higher nitrate concentrations suggested more conservative transport. Lastly, these results reveal how hydraulic conductivity variation and subsurface topographic complexity explain otherwise paradoxical solute and flow behaviors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Three-Dimensional Settling Dynamics of Environmental Microplastics

Resolving the three-dimensional settling dynamics of microplastic (MP) particles is essential for developing comprehensive models of MP transport in rivers-both vertically within the water column and laterally across the channel. While previous research has largely examined one-dimensional vertical settling velocities, little is known about the lateral drifting, settling paths, and horizontal velocities of MPs. To address this, we investigated the full three-dimensional settling behavior of environmental MPs collected from rivers and ocean water, as well as from estuarine and ocean sediment. Geometric properties of 127 environmental MPs were quantified by a dynamic particle image analyzer, and their settling trajectories were recorded and reconstructed via a multicamera tracking algorithm. This enabled quantification of a particle's horizontal drift, tortuosity, amplitude and settling pattern, as well as vertical and horizontal velocities. Results showed that spherical MPs settled with minimal lateral displacement, whereas elongated particles, such as rod- and blade-shaped MPs, displayed pronounced lateral movements, reaching up to 65 times their equivalent diameter and averaging more than twice that of spheres. These dynamics suggest that elongated MPs may have a greater probability for wider lateral dispersion in rivers, increasing their likelihood for interactions with riverbanks and channel boundaries compared to more spherical shaped MPs.

54 ENVIRONMENTAL SCIENCES↗

Comparing Convective Self‐Aggregation in Idealized Models to Observed Moist Static Energy Variability Near the Equator

Abstract Idealized convection‐permitting simulations of radiative‐convective equilibrium have become a popular tool for understanding the physical processes leading to horizontal variability of tropical water vapor and rainfall. However, the applicability of idealized simulations to nature is still unclear given that important processes are typically neglected, such as lateral water vapor advection by extratropical intrusions, or interactive ocean coupling. Here, we exploit spectral analysis to compactly summarize the multiscale processes supporting convective aggregation. By applying this framework to high‐resolution reanalysis data and satellite observations in addition to idealized simulations, we compare convective‐aggregation processes across horizontal scales and data sets. The results affirm the validity of the radiative‐convective equilibrium simulations as an analogy to the real world. Column moist static energy tendencies share similar signs and scale selectivity in convection‐permitting models and observations: Radiation increases variance at wavelengths above 1,000 km, while advection damps variance across wavelengths, and surface fluxes mostly reduce variance between 1,000 and 10,000 km.

Beucler, Tom↗

Nonlinearity of the post-spinel transition and its expression in slabs and plumes worldwide

Phase transitions in the mantle control its internal dynamics and structure. The post-spinel transition marks the upper–lower mantle boundary, where ringwoodite dissociates into bridgmanite plus ferropericlase, and its Clapeyron slope regulates mantle flow across it. This interaction has previously been assumed to have no lateral spatial variations, based on the assumption of a linear post-spinel boundary in pressure and temperature. Here we present laser-heated diamond anvil cell experiments with synchrotron X-ray diffraction to better constrain this boundary, especially at higher temperatures. Combining our data with results from the literature, and using a global analysis based on machine learning, we find a pronounced nonlinearity in the post-spinel boundary, with its slope ranging from –4 MPa/K at 2100 K, to –2 MPa/K at 1950 K, and to 0 MPa/K at 1600 K. Changes in temperature over time and space can therefore cause the post-spinel transition to have variable effects on mantle convection and the movement of subducting slabs and upwelling plumes.

58 GEOSCIENCES↗

Surface and sub-surface porosity effects on the initial free surface expansion in shocked single crystal aluminum

Defects and roughness at a material’s surface can allow for the formation of a material jet when a shockwave reaches a surface. The formation of a jet can lead to significant material damage of the shocked material, as well as the downstream material that the jet impacts. Here, we utilize planar shocks in single crystal aluminum to assess initial jetting formation for surface notches and sub-surface porosity. In the case of surface notches, we find that changing the width of the notch can cause the shock breakout response to transition from a standard jetting mechanism to an atomic atomization at high velocities. This transition occurs due to the mechanisms associated with lateral relaxations within the notch and how this interacts with the shock focusing event that induces jetting. For sub-surface pores, the pore collapse induces a re-shock, localized near the pore, that is stronger than the initial shock, but unsupported. Changing the pore dimensions and location relative to the surface influences the strength of the shock that emanates from its collapse when it reaches the surface, leading to a variety of different breakout conditions including jetting and localized material failure.

36 MATERIALS SCIENCE↗

Towards Automated/Semiautomated Extraction of Faults from Lidar Data

The Pajarito fault system is a complex zone of deformation and a seismically active region nestled within the Rio Grande rift in north-central New Mexico. Numerous laterally discontinuous faults and associated folds and fractures interact in a manner that has important implications for seismic hazards and risk mitigation. Previous efforts have established a foundation for the location of lineaments and structures in the Pajarito fault system; however, ensuring the completeness of the current lineament mapping is required for identifying areas for field validation, evaluating the potential for future seismic activity, and better understanding fault interaction. Assistance with this fault-mapping task via automated or semiautomated techniques as applied to lidar data over a large area of interest is highly desirable. A proof-of-concept processing flow which transforms lidar point-cloud data into a raster of surficial fault candidates is described and illustrated herein. We report these initial results hold great promise toward achieving our ultimate goal.

58 GEOSCIENCES↗

Hysteretic temperature sensitivity of wetland CH 4 fluxes explained by substrate availability and microbial activity

Methane (CH 4 ) emissions from wetlands are likely increasing and important in global climate change assessments. However, contemporary terrestrial biogeochemical model predictions of CH 4 emissions are very uncertain, at least in part due to prescribed temperature sensitivity of CH 4 production and emission. While statistically consistent apparent CH 4 emission temperature dependencies have been inferred from meta-analyses across microbial to ecosystem scales, year-round ecosystem-scale observations have contradicted that finding. Here, we show that apparent CH 4 emission temperature dependencies inferred from year-round chamber measurements exhibit substantial intra-seasonal variability, suggesting that using static temperature relations to predict CH 4 emissions is mechanistically flawed. Our model results indicate that such intra-seasonal variability is driven by substrate-mediated microbial and abiotic interactions: seasonal cycles in substrate availability favors CH 4 production later in the season, leading to hysteretic temperature sensitivity of CH 4 production and emission. Our findings demonstrate the uncertainty of inferring CH 4 emission or production rates from temperature alone and highlight the need to represent microbial and abiotic interactions in wetland biogeochemical models.

54 ENVIRONMENTAL SCIENCES↗

Effect of forest canopy closure on incoming solar radiance

In order to better understand the physical processes involved in defoliation assessment from remotely sensed data, a field study was designed to investigate the effect of forest canopy closure and other environmental variables on incoming solar radiation. Diffuse radiation measurements were recorded in red, infrared, and middle infrared wavelengths using the Mark 2 three band field radiometer. Results to date indicate that the percent canopy closure is the single most important variable affecting incoming solar radiation. In the visible and near infrared regions, interaction between time of day and date (defined later as solar zenith angle) also affect radiometric response. Aspect has only limited influence on radiance response. These same variables do not influence middle infrared response, however. Uniformity of the forest canopy appears to be more important. These results are compared to LANDSAT MSS classification results of gypsy moth defoliation.

Dottavio, C. L.↗