Search NASA⌕ Search

SEARCH · Search NASA

Results for “Line search”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Online-compatible unsupervised nonresonant anomaly detection

There is a growing need for anomaly detection methods that can broaden the search for new particles in a model-agnostic manner. Most proposals for new methods focus exclusively on signal sensitivity. However, it is not enough to select anomalous events—there must also be a strategy to provide context to the selected events. In this work, we propose the first complete strategy for unsupervised detection of nonresonant anomalies that includes both signal sensitivity and a data-driven method for background estimation. Our technique is built out of two simultaneously trained autoencoders that are forced to be decorrelated from each other. This method can be deployed off-line for nonresonant anomaly detection and is also the first complete on-line-compatible anomaly detection strategy. We show that our method achieves excellent performance on a variety of signals prepared for the ADC2021 data challenge.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Long-exposure NuSTAR constraints on decaying dark matter in the Galactic halo

Here, we present two complementary NuSTAR x-ray searches for keV-scale dark matter decaying to monoenergetic photons in the Milky Way halo. In the first, we utilize the known intensity pattern of unfocused stray light across the detector planes—the dominant source of photons from diffuse sources—to separate astrophysical emission from internal instrument backgrounds using ~7- Ms/detector deep blank-sky exposures. In the second, we present an updated parametric model of the full NuSTAR instrument background, allowing us to leverage the statistical power of an independent ~20-Ms/detector stacked exposures spread across the sky. Finding no evidence of anomalous x-ray lines using either method, we set limits on the active-sterile mixing angle sin 2 ⁡(2⁢θ) for sterile-neutrino masses 6–40 keV. The first key result is that we strongly disfavor a ~7-keV sterile neutrino decaying into a 3.5-keV photon. The second is that we derive leading limits on sterile neutrinos with masses ~15–18 keV and ~25–40 keV, reaching or extending below the big bang nucleosynthesis limit. In combination with previous results, the parameter space for the neutrino minimal standard model is now nearly closed.

79 ASTRONOMY AND ASTROPHYSICS↗

Spatially quasi-periodic bifurcations from periodic traveling water waves and a method for detecting bifurcations using signed singular values

We present a method of detecting bifurcations by locating zeros of a signed version of the smallest singular value of the Jacobian. This enables the use of quadratically convergent root-bracketing techniques or Chebyshev interpolation to locate bifurcation points. Only positive singular values have to be computed, though the method relies on the existence of an analytic or smooth singular value decomposition (SVD). The sign of the determinant of the Jacobian, computed as part of the bidiagonal reduction in the SVD algorithm, eliminates slope discontinuities at the zeros of the smallest singular value. We use the method to search for spatially quasi-periodic traveling water waves that bifurcate from large-amplitude periodic waves. The water wave equations are formulated in a conformal mapping framework to facilitate the computation of the quasi-periodic Dirichlet-Neumann operator. We find examples of pure gravity waves with zero surface tension and overhanging gravity-capillary waves. In both cases, the waves have two spatial quasi-periods whose ratio is irrational. We follow the secondary branches via numerical continuation beyond the realm of linearization about solutions on the primary branch to obtain traveling water waves that extend over the real line with no two crests or troughs of exactly the same shape. The pure gravity wave problem is of relevance to ocean waves, where capillary effects can be neglected. Such waves can only exist through secondary bifurcation as they do not persist to zero amplitude. The gravity-capillary wave problem demonstrates the effectiveness of using the signed smallest singular value as a test function for multi-parameter bifurcation problems. This test function becomes mesh independent once the mesh is fine enough.

97 MATHEMATICS AND COMPUTING↗

Fast Muon Capture Monitoring in Mu2e with the CAPHRI Detector

The Mu2e experiment at Fermilab will search for the charged lepton flavor violating (CLFV) process of a neutrinoless muon-to-electron conversion in the field of an aluminum nucleus. Reaching the experiment’s target sensitivity requires precise normalization of the physics signal through accurate monitoring of the muon capture rate on the stopping target. For this purpose, the Calorimeter Precise High-Resolution Intensity detector (CAPHRI) has been developed. The detector is composed of four LYSO crystals installed in the upstream disk of the Mu2e calorimeter and read out with the standard calorimeter readout. CAPHRI measures the muon capture rate by detecting the characteristic 1.8~MeV gamma emission line of the $^{27}Al(\mu^−, \nu n \gamma) ^{26}Mg$ nuclear reaction. The fast, precise response enables injection-by-injection monitoring of proton beam intensity fluctuations. We report on the commissioning and performance characterization of CAPHRI. The response of each channel is calibrated at two SiPM overvoltages using both the intrinsic self-emission of the LYSO crystals and cosmic ray signals. In parallel, Monte Carlo simulations are used to evaluate the detector acceptance and the expected signal-to-background ratio under realistic running conditions. Preliminary results show a crystal light yield consistent with expectations and a channel inter-calibration at the 2--4% level. Simulation studies indicate that the detector acceptance and background rejection satisfy the requirements for physics operations, with about 1000 detected events per beam injection at a beam power of 1.5~kW. These results demonstrate that CAPHRI is an effective tool for beam monitoring and signal normalization in Mu2e.

Ciccarella, V. [Frascati; U. Rome La Sapienza (mai↗

A New Sample of Gamma-Ray Emitting Jetted Active Galactic Nuclei—Preliminary Results

We are compiling a new list of gamma-ray jetted active galactic nuclei (AGN), starting from the fourth catalog of point sources of the Fermi Large Area Telescope (LAT). Our aim is to prepare a list of jetted AGN with known redshifts and classifications to be used to calibrate jet power. We searched in the available literature for all the published optical spectra and multiwavelength studies useful to characterize the sources. We found new, missed, or even forgotten information leading to a substantial change in the redshift values and classification of many sources. We present here the preliminary results of this analysis and some statistics based on the gamma-ray sources with right ascension within the interval 0 h --12 h (J2000). Although flat-spectrum radio quasars and BL Lac objects are still the dominant populations, there is a significant increase in the number of other objects, such as misaligned AGN, narrow-line Seyfert 1 galaxies, and Seyfert galaxies. We also introduced two new classes of objects: changing-look AGN and ambiguous sources. About one third of the sources remain unclassified.

79 ASTRONOMY AND ASTROPHYSICS↗

Observation of the Open-Charm Tetraquark Candidate T c s 0 * ( 2870 ) 0 in the B − → D − D 0 K S 0 Decay

An amplitude analysis of B − → D − D 0 K S 0 decays is performed using proton-proton collision data, corresponding to an integrated luminosity of 9 fb − 1 , collected with the LHCb detector at center-of-mass energies of 7, 8, and 13 TeV. A resonant structure of spin-parity 0 + is observed in the D 0 K S 0 invariant-mass spectrum with a significance of 5.3 σ . The mass and width of the state, modeled with a Breit-Wigner line shape, are determined to be 2883 ± 11 ± 8 MeV / c 2 and 87 − 47 + 22 ± 17 MeV , respectively, where the first uncertainties are statistical and the second systematic. These properties and the quark content are consistent with those of the open-charm tetraquark candidate T c s 0 * ( 2870 ) 0 observed previously in the D + K − final state of the B − → D − D + K − decay. This result confirms the existence of the T c s 0 * ( 2870 ) 0 state in a new decay mode. The T c s 1 * ( 2900 ) 0 state, reported in the B − → D − D + K − decay, is also searched for in the D 0 K S 0 invariant-mass spectrum of the B − → D − D 0 K S 0 decay, without finding evidence for it. © 2025 CERN, for the LHCb Collaboration 2025 CERN

Aaij, R. (ORCID:0000000305331952)↗

A Systematic Search for Outbursting AM CVn Systems with the Zwicky Transient Facility

AM CVn systems are a rare type of accreting binary that consists of a white dwarf and a helium-rich, degenerate donor star. Using the Zwicky Transient Facility (ZTF), we searched for new AM CVn systems by focusing on blue, outbursting stars. We first selected outbursting stars using the ZTF alerts. We cross matched the candidates with Gaia and Pan-STARRS catalogs. The initial selection of candidates based on the Gaia BP-RP contains 1751 unknown objects. We used the Pan-STARRS g-r and r-i color in combination with the Gaia color to identify 59 strong AM CVn candidates. We obtained identification spectra of 35 sources, of which 18 are high-priority candidates, and discovered nine new AM CVn systems and one magnetic CV that shows only He-ii lines. Using the outburst recurrence time, we estimate the orbital periods of the nine new AM CVn systems that are in the range of 29–50 minutes. We conclude that targeted follow up of blue, outbursting sources is an efficient method to find new AM CVn systems and we plan to follow up all candidates we identified to systematically study the population of outbursting AM CVn systems.

79 ASTRONOMY AND ASTROPHYSICS↗

Measurement of the LCLS-II dark current using the LDMX Trigger Scintillator Prototype

The Light Dark Matter eXperiment (LDMX) is a proposed fixed-target missing momentum search for sub-GeV thermal relic dark matter. LDMX aims to probe thermal dark matter targets with 1016 electrons on target. Such an approach requires a high-repetition rate, low-current beam, with an average of one electron on target per event. These requirements are well-suited to the DArk Sector Experiments at LCLS-II (DASEL) facility, which will take advantage of the unused RF buckets between LCLS-II bunches to produce a well-defined low-current beam with a 26.9 ns bunch spacing. This document describes the results of a measurement of dark current in the Sector 30 transfer line (S30XL) of the LCLS-II beam, using a prototype of the LDMX trigger scintillator (TS) subsystem.

Berzin, Elizabeth [SLAC]↗

A CUPID Li2100MoO4 scintillating bolometer tested in the CROSS underground facility

A scintillating bolometer based on a large cubic Li$_{2}$$^{100}$MoO$_4$ crystal (45 mm side) and a Ge wafer (scintillation detector) has been operated in the CROSS cryogenic facility at the Canfranc underground laboratory in Spain. The dual-readout detector is a prototype of the technology that will be used in the next-generation $0\nu2\beta$ experiment CUPID. The measurements were performed at 18 and 12 mK temperature in a pulse tube dilution refrigerator. This setup utilizes the same technology as the CUORE cryostat that will host CUPID and so represents an accurate estimation of the expected performance. The Li$_{2}$$^{100}$MoO$_4$ bolometer shows a high energy resolution of 6 keV FWHM at the 2615 keV $\gamma$ line. The detection of scintillation light for each event triggered by the Li$_{2}$$^{100}$MoO$_4$ bolometer allowed for a full separation ($\sim$8$\sigma$) between $\gamma$($\beta$) and $\alpha$ events above 2 MeV. The Li$_{2}$$^{100}$MoO$_4$ crystal also shows a high internal radiopurity with $^{228}$Th and $^{226}$Ra activities of less than 3 and 8 $\mu$Bq/kg, respectively. Taking also into account the advantage of a more compact and massive detector array, which can be made of cubic-shaped crystals (compared to the cylindrical ones), this test demonstrates the great potential of cubic Li$_{2}$$^{100}$MoO$_4$ scintillating bolometers for high-sensitivity searches for the $^{100}$Mo $0\nu2\beta$ decay in CROSS and CUPID projects.

47 OTHER INSTRUMENTATION↗

AGGREGATE: dAta-driven modelinG preservinG contRollable dEr for outaGe mAnagemenT and rEsiliency (Final Report)

The AGGREGATE project team successfully developed and validated various modules for outage management. Brief summaries of each module are provided to showcase their strength for outage management and restoration for a distribution system with a high penetration of connected distribution energy resources (DERs). In recent years, inverter-based DERs have been widely deployed in distribution system. A most of behind-the-meter (BTM) solar power generation is not visible to the utility. The data-driven DER and load estimation modules are using machine learning (ML) and artificial intelligence (AI) to manage this issue, which provides an opportunity for distribution system operators (DSOs) to operate systems and make decisions in real-time for a distribution system with a high penetration of DERs deployed. Also, the estimated DER and true load can be further leveraged in network aggregation and cold-load pick up estimation for reducing the computing complexity and providing for fast restoration. After load demand and DER power generations have been estimated, the information will support topology and state estimation (SE). The topology estimation module demonstrated the viability of mixed integer linear programming (MILP) formulation to estimate the most likely operational radial topology and outage sections using power flow measurements, historical/estimated load and DERs data and smart meter ping measurements. Formulation includes continuous (power flow, load and DERs data) and binary measurements (smart meter ping measurements) in a single formulation. Errors in continuous data and binary data are modeled as normal distribution and Bernoulli distribution, respectively. In the future distribution grid, the power injection from controllable DERs will be essential for efficient and resilient grid operation. However, determining the optimal DER injections and restoration actions is dependent on knowledge of the system states. State estimation (SE), already the cornerstone of transmission energy management systems, will become commonplace in distribution management systems as more measurements become available from deployment of automated metering infrastructure (AMI). Observability analysis is the first step in SE, as it determines the sufficiency of the available measurements for accurately estimating the current system states. A new type of pseudo-measurement called a Correlational Measurement (CM) is introduced in this module, to enhance the observability of the system to enable more accurate SE. CMs encapsulate knowledge of correlation between demand patterns for similar classes of loads as well as injection patterns for same-technology renewable DERs. During grid contingency scenarios, DERs have been traditionally disconnected, without any fault ride-through capabilities. However, with new regulations and better technology, it is feasible for these resources to contribute to the grid’s restoration after an adverse event and hence enhance resilience. The controllability module proposes a two-step restoration scheme for the power system restoration process by leveraging additional degrees of freedom in power electronics interfaced DERs for mitigating voltage problems. In a resilience mode without the utility system, the distribution grid relies on DERs to serve critical load. In such a severe event with multiple faults on the distribution feeders, actuation of various protective devices (PDs) divides the distribution system into electrical islands. The undetected actuated PDs due to fault current contributions from DERs can delay the restoration process, thereby reducing the system resilience. The Advanced Outage Management (AOM) and the Advanced Feeder Restoration (AFR) modules developed in this project provide improved system resilience with multiple DERs. AOM identifies the faulted sections and actuated PDs in a distribution system with DERs by incorporating smart meter data. The most credible outage scenario including fault locations, PD actuations, and fault indicator (FI) failures is identified by a set of binary integer linear programming incorporating hypotheses. The AFR module serves to restore a distribution system with available energy resources taking into consideration the availability of utility sources and DERs. By partitioning the system into islands, critical load will be served with the available generation resources within islands based on the solution of a MILP. When the utility systems become available, the optimal path will be determined by a spanning tree search algorithm that reconnects these islands back to substations and restores the remaining load. The transmission and distribution (T&D) co-simulation module was used to validate the effect of a control action performed on the distribution side assets as it propagates to the transmission side. This ensures that the control action performed results in a feasible operating point on both the transmission and the distribution system. In addition to validation, the team used the T&D co-simulation module to demonstrate how distribution system assets can be used to mitigate issues on the transmission system. Specifically, the team demonstrated that appropriate switching operations on the distribution side can alleviate the line overload condition on the transmission side without causing new operational constraint violations.

24 POWER TRANSMISSION AND DISTRIBUTION↗

exoALMA. V. Gaseous Emission Surfaces and Temperature Structures

An analysis of the gaseous component in protoplanetary disks can inform us about their thermal and physical structure, chemical composition, and kinematic properties, all of which are crucial for understanding various processes within the disks. By exploiting the asymmetry of the line emission, or via line profile analysis, we can locate the emitting surfaces. Here, we present the emission surfaces of the exoALMA sources in 12 CO J = 3–2, 13 CO J = 3–2, and CS J = 7–6. We find that 12 CO traces the upper disk atmosphere, with mean $\langle$ z/r $\rangle$ values of ≈0.28, while 13 CO and CS trace lower regions of the disk with mean $\langle$ z/r $\rangle$ values of ≈0.16 and ≈0.18, respectively. We find that 12 CO $\langle$ z/r $\rangle$ and the disk mass are positively correlated with each other; this relationship offers a straightforward way to infer the disk mass. We derive 2D r – z temperature distributions of the disks. Additionally, we search for substructure in the surfaces and radial intensity profiles; we find evidence of localized substructure in the emission surfaces and peak intensity profiles of nearly every disk, with this substructure often being coincident between molecular tracers, intensity profiles, and kinematic perturbations. Four disks display evidence of potential photodesorption, implying that this effect may be common even in low far-ultraviolet star-forming regions. For most disks, we find that the physical and thermal structure is more complex than analytical models can account for, highlighting a need for more theoretical work and a better understanding of the role of projection effects on our observations.

79 ASTRONOMY AND ASTROPHYSICS↗

Conducting Beyond the Standard Model Searches in the MicroBooNE Detector with Machine Learning

MicroBooNE is one of the three neutrino detectors that comprise the Short Baseline Neutrino program at Fermilab. It utilizes Liquid Argon Time Projection Chamber (LArTPC) technology to probe the anomalous excess of electron-like events seen by its predecessor, MiniBooNE. Additionally, it provides a rich avenue of study for Beyond the Standard Model (BSM) theories. In the GeV energy regime relevant to MicroBooNE's beam neutrino program, many such theories lead to signatures which produce electron-positron (e+e-) final-states in the detector. While photons can pair produce into e+e- pairs with negligible opening angles, BSM theories often predict e+e- pairs with a broader range of opening angles. Thus, developing a tool that can reliably measure the opening angles of e+e- events is crucial for conducting rigorous BSM studies. However, these e+e- pairs result in topologically complex showers instead of clean tracks, making non-machine learning (ML) based methods such as line-fitting unsuitable for this task. This poster discusses the effectiveness of ML, namely a graph neural network called PointNet++, in accomplishing this goal. Our studies show promising results, with a resolution for the opening angle of 5 or less.

Bhelande, Vedang Adutya [Los Alamos]↗

Methods to accelerate high-throughput screening of atomic qubit candidates in van der Waals materials

The discovery of atom-like spin emitters associated with defects in two-dimensional (2D) wide-bandgap (WBG) semiconductors presents new opportunities for highly tunable and versatile qubits. So far, the study of such spin emitters has focused on defects in hexagonal boron nitride (hBN). However, hBN necessarily contains a high density of nuclear spins, which are expected to create a strong incoherent spin-bath that leads to poor coherence properties of spins hosted in the material. Therefore, identification of new qubit candidates in other 2DWBG materials is necessary. Given the time demands of ab initio methods, new approaches for rapid screening and calculations of identifying properties of suitable atom-like qubits are required. In this work, we present two new methods for rapid estimation of the zero-phonon line (ZPL), a key property of atomic qubits in WBG materials. First, the ZPL is calculated by exploiting Janak’s theorem. For finite changes in occupation, we provide the leading-order estimate of the correction to the ZPL obtained using Janak’s theorem, which is more rapid than the standard method (ΔSCF). Next, we demonstrate an approach to converging excited states that is faster for systems with small strain than the standard approach used in the ΔSCF method. We illustrate these methods using the case of the singly negatively charged calcium vacancy in SiS2, which we are the first to propose as a qubit candidate. This work has the potential to assist in accelerating the high-throughput search for quantum defects in materials, with applications in quantum sensing and quantum computing.

Kuate Defo, Rodrick (ORCID:0000000242788196)↗

Breakthrough Conductivity Enhancement in Deep Eutectic Solvents via Grotthuss–Type Proton Transport

There is an increasing demand for the development of ion-conducting electrolytes for energy storage systems. Much attention is directed toward deep eutectic solvents as potential candidates. In the search for highly conductive systems, the possibility of designing deep eutectic solvents with Grotthuss-type proton transport is widely overlooked. Herein, ethaline, a mixture of choline chloride and ethylene glycol is used in a 1:2 molar ratio, to induce a significant conductivity increase with the addition of water and sulfuric acid (H 2 SO 4 ). The achieved breakthrough conductivity is analyzed experimentally and simulated with ab initio molecular dynamics (AIMD). At sufficient water content, an H-bonding network is formed that leads to a significant breakthrough conductivity based on H 2 SO 4 -derived proton transfer following the long-established Grotthuss proton transport mechanism. This result is substantiated by the positive deviation from the ideal KCl line in the Walden plot. Specifically, the data series positioned above the reference line indicates a Grotthuss mechanism in action. The AIMD simulations demonstrate proton transfer between water and ethylene glycol, supported by simulation frames captured at various times.

36 MATERIALS SCIENCE↗

XMP gas-rich dwarfs in nearby voids: results of BTA spectroscopy

We present the second part of results of the ongoing project aimed at searching for and studying eXtremely Metal-Poor (XMP) – adopted as those with Z gas ≲ Z ⊙ /30, or with 12+log (O/H) ≲ 7.21 dex - very gas-rich blue dwarfs in voids. They were first identified in the course of the ‘unbiased’ study of the galaxy population in the nearby Lynx–Cancer void. These very rare and unusual galaxies seem to be the best proxies of so-called Very Young Galaxies (VYGs) defined recently in model simulations by Tweed et al. To date, for 16 pre-selected void XMP candidates, using the Big Telescope Alt-azimuth (BTA), the SAO 6-m telescope, we have obtained spectra suitable for the determination of O/H. For majority of the observed galaxies, the principal line [O iii] λ4363 , used for the direct classical T e method of O/H determination, is undetected. Therefore, to estimate O/H, we use a new ‘strong-lines’ method by Izotov et al. This appears to be the most accurate empirical O/H estimator for the range of 12+log (O/H) ≲ 7.4–7.5. For objects with higher O/H, we use the semi-empirical method by Izotov & Thuan with our modification accounting for variance of the excitation parameter O 32 . Six of those 16 candidates are found, with confidence, to be XMP dwarfs. In addition, eight studied galaxies are less metal-poor, with 12+log (O/H) = 7.24–7.33, and these can also fall into the category of VYG candidates. Taking into account our recently published work and the previously known (nine prototype galaxies) XMP gas-rich void objects, the new findings increase the number of this type of galaxy known to date to a total of 19.

79 ASTRONOMY AND ASTROPHYSICS↗

COOL–LAMPS. III. Discovery of a 25."9 Separation Quasar Lensed by a Merging Galaxy Cluster*

In the third paper from the COOL–LAMPS Collaboration, we report the discovery of COOL J0542-2125, a gravitationally lensed quasar at z = 1.84, observed as three images due to an intervening massive galaxy cluster at z = 0.61. The lensed quasar images were identified in a search for lens systems in recent public optical imaging data and have separations on the sky up to 25farcs9, wider than any previously known lensed quasar. The galaxy cluster acting as a strong lens appears to be in the process of merging, with two subclusters separated by ~1 Mpc in the plane of the sky, and their central galaxies showing a radial velocity difference of ~1000 km s-1. Both cluster cores show strongly lensed images of an assortment of background sources, as does the region between them. A preliminary strong lens model implies masses of $M_{<250kpc} = 1.79^{+0.16}_{-0.01}$ x $10^{14} M_⊙$ and $M_{<250kpc} = 1.48^{+0.04}_{-0.10}$ x $10^{14} M_⊙$ for the east and west subclusters, respectively. This line of sight is also coincident with an ROSAT ALL-sky Survey source, centered between the two confirmed cluster halos reminiscent of other major cluster-scale mergers. Archival and new follow-up imaging show flux variability in the quasar images of up to 0.4 mag within ~1 yr, and new multicolor imaging data reveal a 2σ detection of the underlying quasar host. A lens system with this configuration offers rare opportunities for a range of future studies of both the lensed quasar and its host and the foreground cluster merger causing the lensing.

79 ASTRONOMY AND ASTROPHYSICS↗

Supernova Siblings: Assessing the Consistency of Properties of Type Ia Supernovae that Share the Same Parent Galaxies

While many studies have shown a correlation between properties of the light curves of SNe Ia and properties of their host galaxies, it remains unclear what is driving these correlations. We introduce a new direct method to study these correlations by analyzing "parent" galaxies that host multiple SNe Ia "siblings." In this study, we search the Dark Energy Survey SN sample, one of the largest samples of discovered SNe, and find eight galaxies that hosted two likely SNe Ia. Comparing the light-curve properties of these SNe and recovered distances from the light curves, we find no better agreement between properties of SNe in the same galaxy as any random pair of galaxies, with the exception of the SN light-curve stretch. We show at 2.8 σ significance that at least one-half of the intrinsic scatter of SNe Ia distance modulus residuals is not from common host properties. We also discuss the robustness with which we could make this evaluation with LSST, which will find 100 &#x00d7; more pairs of galaxies, and pave a new line of study on the consistency of SNe Ia in the same parent galaxies. Finally, we argue that it is unlikely that some of these SNe are actually single, lensed SN with multiple images.

79 ASTRONOMY AND ASTROPHYSICS↗

Detector Characterization for SuperCDMS Commissioning

Super Cryogenic Dark Matter Search (SuperCDMS) SNOLAB is a next generation direct detection experiment search ing for low mass dark matter using cryogenic germanium and silicon detectors operated at millikelvin temperatures. As the experiment begins its first commissioning data taking, establishing that the detectors respond to energy deposits in a stable, predictable way is a prerequisite for any future physics analysis. This work presents a study of detector stability for four SuperCDMS SNOLAB detectors, det 7 and det 15 (germanium), and det 11 and det 14 (silicon), using two data sets taken during early commissioning: dedicated Barium-133 calibration runs, which provide a known gamma ray energy reference at 356 keV, and low background runs, which record whatever background radiation the detectors see with no external source present. The Ba-133 data do not show a distinct, well localized line at the expected energy, and the low background data show a baseline that drifts and oscillates over time rather than remaining flat. This baseline instability appears consistently across multiple channels rather than being confined to one, suggesting a shared, detector wide cause rather than a single faulty channel. Together, these observations point to the detectors’ cryogenic support system as the likely source of the instability, since small temperature fluctuations introduced during normal operation of the cooling system could plausibly couple into the exquisitely temperature sensitive detectors. These results inform the ongoing commissioning effort by narrowing down where instability in the current data is originating from.

O'Hanlon, Viktoria M. [Skidmore Coll.; Fermilab]↗