Search NASA⌕ Search

SEARCH · Search NASA

Results for “MULTIPLETS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

EUV studies of N2 and O2 produced by low energy electron impact

The emission spectra resulting from electron impact excitation on molecular nitrogen and oxygen in the 500-1200 A spectral region are investigated. Electron energies are from 0 to 300 eV. Numerous bands of N2 are found between 800 and 1000 A. Excitation functions are measured for the NII 916 A, the OI 879 A, and the OII 834 multiplets, and nitrogen band emission. Cross sections were measured at 200 eV for several of the band emissions plus the NI 1135 A, NI 1164 A, NI 1177 A, NII 776 A, NII 1084 A, OI 1152 A, OI 1041 A, OI 999 A, OI 989 A, OI 879 A, OII 834 A, OII 616 A, OII 555 A, OII 539 A, and OII 718 A multiplets.

Morgan, H. D.↗
NASA NTRS1990

Isolated galaxies, pairs, and groups of galaxies

The authors searched for isolated galaxies, pairs and groups of galaxies in the CfA survey (Huchra et al. 1983). It was assumed that the distances to galaxies are given by R = V/H sub o, where H sub o = 100 km s(exp -1) Mpc(exp -1) and R greater than 6 Mpc. The searching procedure is close to those, applied to find superclusters of galaxies (Kalinkov and Kuneva 1985, 1986). A sphere with fixed radius r (asterisk) is described around each galaxy. The mean spatial density in the sphere is m. Let G (sup 1) be any galaxy and G (sup 2) be its nearest neighbor at a distance R sub 2. If R sub 2 exceeds the 95 percent quintile in the distribution of the distances of the second neighbors, then G (sup 1) is an isolated galaxy. Let the midpoint of G (sup 1) and G (sup 2) be O sub 2 and r sub 2=R sub 2/2. For the volume V sub 2, defined with the radius r sub 2, the density D sub 2 less than k mu, the galaxy G (sup 2) is a single one and the procedure for searching for pairs and groups, beginning with this object is over and we have to pass to another object. Here the authors present the groups - isolated and nonisolated - with n greater than 3, found in the CfA survey in the Northern galactic hemisphere. The parameters used are k = 10 and r (asterisk) = 5 Mpc. Table 1 contains: (1) the group number, (2) the galaxy, nearest to the multiplet center, (3) multiplicity n, (4) the brightest galaxy if it is not listed in (2); (5) and (6) are R.A. and Dec. (1950), (7) - mean distance D in Mpc. Further there are the mean density rho (8) of the multiplet (galaxies Mpc (exp -3), (9) the density rho (asterisk) for r (asterisk) = 5 Mpc and (10) the density rho sub g for the group with its nearest neighbor. The parenthesized digits for densities in the last three columns are powers of ten.

Kuneva, I.↗
NASA NTRS1992

The complete UV spectrum of SO2 by electron impact. I - The vacuum ultraviolet spectrum

Measurements of the VUV emission cross sections of SO2 from 40 to 200 nm in the laboratory in a crossed beam experiment are reported. The wavelength range comprised the EUV spectrum, from 40 to 120 nm, and the FUV spectrum, from 120 to 200 nm. The studies included the measurement of excitation functions of the strongest multiplets from 0 to 1 keV impact energy and the identification of dissociation processes from the analysis of the threshold excitation function. It is shown that the FUV emission cross sections for dissociative excitation of atomic multiplets are generally much larger in the FUV than in the EUV. The emission cross sections measured are important for the preparation and data analysis of spacecraft observations of Io to be obtained for the 1990s.

Ajello, Joseph M.↗
NASA NTRS1992

On the calculation of atomic term populations

The usefulness of calculations on model atomic term systems which can give spectral multiplet intensities is emphasized, in contrast to more detailed level calculations which are not always feasible because of lack of appropriate atomic data. A more general expression for the multiplet radiative transition rate is proposed to facilitate term representations. The differences between term and level representations are discussed quantitatively with respect to a model three-level atom and real examples of the C III and Ne IV ions. It is shown that term representations fail at lower densities when level inverse lifetimes within terms differ by only a few orders of magnitude. In such cases one must resort to other methods; a hybrid calculation is therefore proposed to fill this need and is carried out for the C III ion to demonstrate its feasibility and validity.

Kastner, S. O.↗
NASA NTRS1992

Photospheric velocity gradients in B1 supergiants

We present IUE spectra for a set of B1 supergiants. These data clearly demonstrate that the Si III 1300A multiplet (lower level 6.6 ev above ground) becomes progressively more asymmetric with increasing luminosity or, equivalently, mass loss. In the most luminous supergiants, the cores of the 1300A multiplets become displaced by up to -150 km/s relative to nearby, weaker lines. In addition, systematic velocity shifts and asymmetries are also present in the strong Si III singlets 1312A and 1417A in the more luminous stars. The obvious implication of these observations is that the outer photospheres of B supergiants are affected by radial expansion, and this may account for why even non-LTE line analyses of these stars require large micro-turbulent velocity fields, and why line blanketed LTE models underestimate their overall UV line blanketing.

Massa, D.↗
NASA NTRS1993

Radiative lifetimes, branching rations, and absolute transition probabilities in Cr II and Zn II

New absolute atomic transition probability measurements are reported for 12 transitions in Cr II and two transitions in Zn II. These transition probabilities are determined by combining branching ratios measured by classical techniques and radiative lifetimes measured by time-resolved laser-induced fluorescence. The measurements are compared with branching fractions, radiative lifetimes, and transition probabilities in the literature. The 206 nm resonance multiplets in Cr II and Zn II are included in this work. These multiplets are very useful in determining the distribution of the elements in the gas versus grain phases in the interstellar medium.

Bergeson, S. D.↗
NASA NTRS1995

Atomic Physics with the Goddard High-Resolution Spectrograph on the Hubble Space Telescope: Oscillator Strengths for Neutral Sulfur - No. 1

Interstellar spectra toward zeta Oph acquired with the Goddard High-Resolution Spectrograph were used to obtain oscillator strengths for approximately two dozen S I lines. This analysis was possible because precisely determined experimental oscillator strengths are available for several multiplets, including one with a weak interstellar line. The self-consistent set of oscillator strengths then was obtained from a curve of growth based on line strengths spanning a range of a factor of 100. The derived f-values for a number of multiplets differ from values quoted by Morton (1991) but are generally consistent with the suite of available experimental and theoretical results.

Federman, S. R.↗
NASA NTRS1997

Structure and Rotation of the Solar Interior: Initial Results from the MDI Medium-L Program

The medium-l program of the Michelson Doppler Imager instrument on board SOHO provides continuous observations of oscillation modes of angular degree, l, from 0 to approximately 300. The data for the program are partly processed on board because only about 3% of MDI observations can be transmitted continuously to the ground. The on-board data processing, the main component of which is Gaussian-weighted binning, has been optimized to reduce the negative influence of spatial aliasing of the high-degree oscillation modes. The data processing is completed in a data analysis pipeline at the SOI Stanford Support Center to determine the mean multiplet frequencies and splitting coefficients. The initial results show that the noise in the medium-l oscillation power spectrum is substantially lower than in ground-based measurements. This enables us to detect lower amplitude modes and, thus, to extend the range of measured mode frequencies. This is important for inferring the Sun's internal structure and rotation. The MDI observations also reveal the asymmetry of oscillation spectral lines. The line asymmetries agree with the theory of mode excitation by acoustic sources localized in the upper convective boundary layer. The sound-speed profile inferred from the mean frequencies gives evidence for a sharp variation at the edge of the energy-generating core. The results also confirm the previous finding by the GONG (Gough et al., 1996) that, in a thin layer just beneath the convection zone, helium appears to be less abundant than predicted by theory. Inverting the multiplet frequency splittings from MDI, we detect significant rotational shear in this thin layer. This layer is likely to be the place where the solar dynamo operates. In order to understand how the Sun works, it is extremely important to observe the evolution of this transition layer throughout the 11-year activity cycle.

Kosovichev, A. G.↗
NASA NTRS1997

On the Role of Resonances in Nonradial Pulsators

Resonances or near resonances are ubiquitous among the excited nonradial pulsation modes of variable stars and they must play an important role in determining their pulsational behavior. Here in a first step at nonlinear asteroseismology, we explore some of the consequences of resonances by means of the amplitude equation formalism. We show how parity and angular momentum constraints can be used to eliminate many of the possible nonlinear resonant couplings between modes (and multiplets of modes), and how the amplitude equations can thus be simplified. Even when we may not be able, nor wish, to make an ab initio computation of the values of the coupling coefficients, it is still possible to obtain constraints on the nature of the excited modes if a resonance between observed frequencies can be identified. Resonances can cause nonlinear frequency locking of modes. This means that the observed frequencies appear in exact resonance even though the linear frequencies are only approximately in resonance. The nonlinear frequency lock, when it occurs, it does so over a range of departures from linear resonance, and it is accompanied by constant pulsation amplitudes. The locked, nonlinear frequencies can differ noticeably from their nonresonant counterparts which are usually used in seismology. This is particularly true for multiplets of modes split by rotation. Beyond the regime of the frequency lock, amplitude and frequency modulations can appear in the pulsations. Far from the resonance condition one recovers the regime of steady pulsations with nonresonant frequencies for which the seismological studies, as they are presently carried out, are justified (provided furthermore, of course, that nonlinear frequency shifts are negligible). Success in identifying a resonance in an observed power spectrum depends on the quality of the data. While keeping this limitation in mind, ew discuss the possible existence of peculiar resonances the pulsations specific variable white dwarfs and delta Scuti stars.

Buchler, J. R.↗
NASA NTRS2005

Coronal Dynamics and Complete Flare Energy Budget for the M Dwarf AD Leo

This grant supported the observing and data analysis for FUSE Cycle 3 project C114 to observe the flare star AD Leo for 50 ksec coordinated with HST (Hubble Space Telescope) STIS ultraviolet spectroscopy and Chandra X-ray spectroscopy. Unfortunately, it was impossible to obtain the planned FUSE observations because AD Leo is a low declination target (delta approximately 20 degrees) and was rendered unobservable by restrictions in the sky coverage for FUSE observations. In April 2002 another M dwarf star, EV Lac, which is at significantly higher declination, was substituted for this project. EV Lac was observed by FUSE for a cumulative exposure of 35 ksec on 2002 July 1. The observation used the large LWRS aperture and collected data in time-tagged mode. The LWRS aperture is large enough that the target should remain within the aperture despite the normal level of pointing jitter and target drift experienced during FUSE observing. Our examination of the stellar signal showed that the target was well within the aperture throughout the observation. The data were split into night-time and day-time data so that the effects of airglow emission were recognizable. No obvious flaring, the primary science objective, was detected during the observation. The only stellar lines detected are 0 VI 1031.9, 1037.6 Angstrom, and the C III 1175 Angstrom, UV multiplet and the 977 Angstrom, resonance line. A comparison of the day-time and night-time spectra show that the 0 VI lines and the C III intersystem multiplet are unaffected by airglow features. The day-time data 977 Angstrom profile shows the presence of significant scattered solar C III photons, which should not be present in the night time spectrum. Emission fluxes for these lines were measured by direct summation of the emission lines. No continuum signal was detected in the region of these lines. The cleanest emission line profiles are for the O VI lines and we performed Gaussian fitting for these profiles. Both lines are clearly skewed with the emission peak shifted shortward of the line centroid and with emission extending further in the longward wing than for the shortward wing. A single Gaussian fits the 1032 Angstrom line profile reasonably and gives a line flux similar to that from direct integration with a line width (FWHM) of 0.16 Angstrom, (46 kilometers per second).

Brown, Alexander↗
NASA NTRS1993

Extreme Ultraviolet Emission Spectrum of CO_2 Induced by Electron Impact at 200 eV

We present the extreme ultraviolet (EUV) emission spectrum of CO_2 induced by electronimpact at 200 eV. There are 36 spectral features which are identified with a resolution of 0.5 nmover the wavelength range of 40 to 125 nm. Absolute emission cross sections were obtained for eachof these features. The EUV emission spectrum induced by electron impact consist of atomicmultiplets of CI,II and OI,II,III as well as CO and CO^+ molecular band systems produced bydissociative excitation. The CI (119.4 nm) multiplet is the strongest feature of CI with a peak crosssection of 3.61 x 10^(-19) cm^2 at 200 eV. The strongest feature of OI in the EUV spectrum is theOI (99.0 nm) multiplet with a peak cross section of 3.59 x 10^(-19) cm^2 at 200 eV.

Kanik, I.↗
NASA NTRS2001

The EUV Airglow of Titan: Production and Loss of N2 c'4(0) - X

The N(2) Carroll-Yoshino (CY) c'(4) X (0,0) and (0,1) Rydberg bands between 95 and 99 nm were reported to be the most prominent EUV emission features in Voyager 1 ultraviolet spectrometer (UVS) airglow spectra from Titan's atmosphere. Although c'(4) is strongly excited by photoelectron impact, the (0,0) band is optically thick near peak production, so a multiple-scattering model is employed to calculate (0,v) nadir-viewing intensities. The model accounts for all known loss processes and quantifies the redistribution of photons to (0,v is greater than 0). Results show 7.6 R of (0,1) intensity, in agreement with reported observations (5-10 R), and 0.2 R of (0,0), in spectacular disagreement with reported observations (6-10 R). Nadir-viewing intensities of all other expected NI multiplets and N2 bands in the brightest portion of the EUV airglow spectrum (92.0-101.5 nm) are also calculated using photodissociative ionization of N(2) and photoelectron impact on N(2). It is found that NI multiplets and N(2) bands near (0,0) and unresolved by the UVS combine to produce 8.3 R, consistent with that reported for (0,0) and indicating that it was misidentified in previous analyses. The Ultraviolet Imaging Spectrograph (UVIS) on Cassini should unambiguously distinguish any (0,0) intensity from the brightest features nearby.

EUV (EXTREME ULTRAVIOLET)↗
DOE OSTI2017

Performance Assessment of a New Gamma Spectroscopy Toolkit: Peak Doctor and the Spectral Nondestructive Assay Platform (SNAP) - 17397

High resolution gamma spectroscopy (HRGS) is a widely used technique for non-destructive characterization of nuclear materials, and assay of radioactive waste. The ability to accurately evaluate raw spectral data is an important step in producing high-quality results. A spectral analysis application known as Peak Doctor has been developed under a Cooperative Research and Development Agreement (CRADA) between LANL and Pajarito Scientific Corporation (PSC). The software has undergone several years of testing and validation by the Radioactive Waste Characterization Team of the LANL Waste Management Services Group (WM-SVS). PeakDoctor is designed to work with the Spectral Nondestructive Assay Platform (SNAP{sup TM}) to provide a complete HRGS analysis engine. SNAP{sup TM} performs model specific corrections for attenuation and geometry. These applications are the major components of a new toolkit designed primarily for portable far-field non-destructive assay. Peak Doctor performs a very accurate peak fit analysis with the goal of improving upon the capabilities of existing commercially available routines. It is designed to be user-configurable and can be customized to any given type of detector and any given type of spectrum. Peak Doctor was developed to resolve many of the inherent complexities in gamma ray spectra including overlapping peaks, complex multiplet regions, large step peaks, backscatter regions and Compton edges. Unlike most spectral analysis platforms, Peak Doctor does not rely on the energy calibration and detector resolution parameters that are saved by the operator in the spectrum file. Instead, key parameters are pre-defined for individual detectors. The software fits a continuum using a series of splines between a series of junctions or 'knots'. Fitting techniques are used to join the splines together to create a near-continuous multi-element curve. Optimizing the location of the knots is one of Peak Doctor's most powerful features. The knots are initially configured using a pre-defined list and are removed or added automatically during the fitting process. Knots are also created when new features are identified such as Step Peaks and Compton Edges. The user can also manually specify knots in order to improve the continuum fit. The initial fit is improved on by removing any outlier regions (which are converted to peaks) and the continuum fitting process is repeated. At this stage, an experienced user can work interactively with the fit by manually converting peak regions to continuum or vice versa. The final step is to fit a series of peaks above the continuum based on detector parameters. Single and multiplet peaks are then processed by either the tailing (piecewise) or non-tailing (Gaussian) Levenberg Marquardt non-linear peak fitting routine depending on the user defined selection. Only a rough knowledge of the detector characteristics (energy calibration and resolution) is required for the fitting process to proceed with good accuracy. Any peaks that are missed can be manually added by the user and will also be fitted. Discontinuities in the peak / continuum fit can be rapidly identified by reviewing the 'residuals scale' plot. For waste streams that are well characterized, it is often the case that routinely encountered spectra will have similar peaks and continuum features. For these cases a handy 'One Step' method is available that proceeds in an automated fashion without user interaction. Peak Doctor has been configured with a set of default spectrum types including plutonium / transuranic waste (including Weapons Grade Pu, Heat Source Pu, Am-241, Am-243 and Np-237), depleted or enriched uranium, nuclear power plant / intermediate level waste (with fission and activation products such as Cs-137 and Co-60) as well as Naturally Occurring Radioactive Materials (NORM). The user can easily add new spectrum types for specific waste streams or other types of radiological / special nuclear materials. The output from PeakDoctor (including net peak area, centroid energy and a list of minimum detectable activity levels at pre-defined regions) is used by SNAP{sup TM} to complete the data analysis process. Isotope activities are calculated using configurable template-driven geometry and attenuation correction methods. The software accounts for matrix and container wall effects, collimator / angular corrections, detector efficiency (based on calibration curves) and stand-off distance. SNAP{sup TM} uses published algorithms incorporating a series of decision points during its operation to allow the analyst to provide logical input to guide the software during the analysis of each unique spectrum. The Peak Doctor / SNAP{sup TM} toolkit has been extensively tested and validated under a variety of conditions using 'benchmark' reference spectra. Test scenarios reported include HPGe-based measurements of well characterized uranium and plutonium standards and radioactive sources with a variety of different geometries and matrix materials including surrogate drums and boxes. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2012

Hiding a Heavy Higgs Boson at the 7 TeV LHC

A heavy Standard Model Higgs boson is not only disfavored by electroweak precision observables but is also excluded by direct searches at the 7 TeV LHC for a wide range of masses. Here, we examine scenarios where a heavy Higgs boson can be made consistent with both the indirect constraints and the direct null searches by adding only one new particle beyond the Standard Model. This new particle should be a weak multiplet in order to have additional contributions to the oblique parameters. If it is a color singlet, we find that a heavy Higgs with an intermediate mass of 200-300 GeV can decay into the new states, suppressing the branching ratios for the standard model modes, and thus hiding a heavy Higgs at the LHC. If the new particle is also charged under QCD, the Higgs production cross section from gluon fusion can be reduced significantly due to the new colored particle one-loop contribution. Current collider constraints on the new particles allow for viable parameter space to exist in order to hide a heavy Higgs boson. We categorize the general signatures of these new particles, identify favored regions of their parameter space and point out that discovering or excluding them at the LHC can provide important indirect information for a heavy Higgs. Finally, for a very heavy Higgs boson, beyond the search limit at the 7 TeV LHC, we discuss three additional scenarios where models would be consistent with electroweak precision tests: including an additional vector-like fermion mixing with the top quark, adding another U(1) gauge boson and modifying triple-gauge boson couplings.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2011

Gluon-fusion Higgs production at NNLO for a non-standard Higgs sector

We consider an extension of the Standard Model with an arbitrary number of heavy quarks having general couplings to the Higgs boson. We construct an effective Lagrangian integrating out quarks that are heavier than half the mass of the Higgs boson and compute the Wilson coefficient for the effective gluon-Higgs vertex through NNLO. We apply our result to a composite Higgs model with vector-like quarks coupling to the third generation quarks. In the heavy quark-mass approximation, we show that the suppression of the leading-order cross section with respect to the Standard Model does not depend on the number of vector-like multiplets introduced. We analyse the effects of QCD and electroweak corrections through three loops, as well as bottom-quark contributions through two loops.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2017

Spectra and Kinetics of YAG:0.5%Er{sup 3+} Radiation Under Pulsed Laser Thermal Excitation

The dependences of single-crystal YAG:0.5%Er{sup 3+} spectra in the range 200–1700 nm and the kinetics of the integrated emission on the excitation-energy density W of a single CO{sub 2}-laser pulse of ~100 ns FWHM duration at λ{sub ex} = 10.6 μm were investigated experimentally. The spectra changed qualitatively when W exceeded the generation threshold W{sub t} of laser plasma near the single-crystal surface. The YAG:0.5%Er{sup 3+} spectra at W < Wt were represented by peaks of selective emission (SE) of Er{sup 3+} multiplets on the continuous spectrum background. New emission peaks and additional background corresponding to emission spectra in a laser-induced air plasma with intensities much higher than the SE peaks appeared due to air ionization near the crystal surface at W > W{sub t}. Oscillograms of the integral emission in the range 600–1700 nm were characterized by a pulse-front duration of τ{sub f} = 1.0–1.6 μs and a decay time τ{sub d} ≈ 2.5 μs if W changed by one order of magnitude. The kinetics of the integrated emission intensity were explained by calculating the single-crystal temperature and the populations of Er{sup 3+} energy levels during conversion of thermal energy into SE during unsteady energy transfer by internal radiation and thermal conductivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Effect of Configuration Interaction of Rare-Earth Ion States on the Intensity of Intermultiplet Transitions

We present the analysis of wave functions and the effect of configuration interaction on the intensity of absorption bands for Pr{sup 3+}, Tm{sup 3+}, and Er{sup 3+} ions. It is shown that due to the strong spin–orbit interaction the wave functions of rare-earth ions are multicomponent superpositions of ″pure″ {sup 2S+1}L{sub J} multiplets with different values of S and L and the same values of the angular momentum J. For this reason, the effect of configurational interaction depends not only on the energy gap up to excited configurations, but also on the presence of high-energy {sup 2S+1}L{sub J} components. The presence of such components yields a strong influence on the configuration interaction even at the deep layers. Another consequence of the multicomponent composition of the wave functions is the formation of groups of strongly interrelated states. When the configuration interaction is not fully taken into account, the error in describing the oscillator strengths is distributed among all the states of the group, and the low overall accuracy of the description is not perceived as a contradiction to the theory. To confirm the proposed assumptions, the oscillator strengths of the absorption transitions of laser materials activated by Pr{sup 3+}, Tm{sup 3+}, and Er{sup 3+} ions are described using the modified Judd–Ofelt theory.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗