Search NASA⌕ Search

SEARCH · Search NASA

Results for “Magnetic potential”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

/U,B,K/ coordinates - A natural system for studying magnetospheric convection

The formulation of the magnetospheric convection problem involves a coordinate system consisting of the electric potential, the magnetic field intensity, and the modified longitudinal invariant. The mapping is extended to include all particles and not just those mirroring in the magnetic equator. Equations of motion for the particle mirror points in this representation are presented. The analysis results in a natural division of the magnetosphere into accelerator and dynamo regions and use of the coordinate system permits trajectory-dependent effects to be distinguished from source- or sink-dependent effects. The representation is illustrated by application to the analysis of the nose structure protons observed by Smith and Hoffman (1974).

Whipple, E. C., Jr.↗
NASA NTRS1980

Determination of efficiencies, loss mechanisms, and performance degradation factors in chopper controlled dc vehical motors. Section 2: The time dependent finite element modeling of the electromagnetic field in electrical machines: Methods and applications

The time dependent solution of the magnetic field is introduced as a method for accounting for the variation, in time, of the machine parameters in predicting and analyzing the performance of the electrical machines. The method of time dependent finite element was used in combination with an also time dependent construction of a grid for the air gap region. The Maxwell stress tensor was used to calculate the airgap torque from the magnetic vector potential distribution. Incremental inductances were defined and calculated as functions of time, depending on eddy currents and saturation. The currents in all the machine circuits were calculated in the time domain based on these inductances, which were continuously updated. The method was applied to a chopper controlled DC series motor used for electric vehicle drive, and to a salient pole sychronous motor with damper bars. Simulation results were compared to experimentally obtained ones.

Hamilton, H. B.↗
NASA NTRS1981

Determination of magnetic helicity in the solar wind and implications for cosmic ray propagation

The mean value of the correlation between local magnetic field and vector potential, known as the magnetic helicity, is a measure of the lack of mirror reflection symmetry of magnetic covariances in a turbulent medium. A method is presented for extraction of helicity spectra from magnetometer data, and applied to an evaluation of the magnetic helicity of interplanetary magnetic fluctuations.

Matthaeus, W. H.↗
NASA NTRS1984

Potential utility of future satellite magnetic field data

The requirements for a program of geomagnetic field studies are examined which will satisfy a wide range of user needs in the interim period between now and the time at which data from the Geopotential Research Mission (GRM) becomes available, and the long term needs for NASA's program in this area are considered. An overview of the subject, a justification for the recommended activities in the near term and long term, and a summary of the recommendations reached by the contributors is included.

Source record↗
NASA NTRS1986

International Halley Watch: Discipline specialists for radio science

Some 34 radio observatories in 18 countries are participating in the Radio Science Net of the International Halley Watch. Approximately 100 radio astronomers are contributing to this effort, which has included observations of comets P/Crommelin and P/Giacobini-Zinner as well as P/Halley. It is clear that the record of data for the 18 cm OH ground state lambda doublet, which provides fundamental information on the gas production rate, kinematics, and potentially the magnetic field in the coma, will be vastly more complete and of higher accuracy than has even been obtained on any previous comet. The coverage by a number of radio observatories will enable short period variations to be studied and correlated with simultaneous data obtained at other wavelengths. Likewise, the first definitive detection of the important parent molecule hydrogen cyanide in a comet was obtained and is being studied by groups in the United States, Sweden, and France. The first detection of the comet with the Very Large Array telescope operated by NRAO was achieved and has produced exciting results for the distribution of emission at high angular resolution from the OH radical. At this writing data are still being obtained and being processed, and there are still strong indications that exciting information will be obtained from radar studies of P/Halley and from searches for additional parent molecules.

Irvine, W. M.↗
NASA NTRS1990

Electron heating in quasi-perpendicular shocks - A Monte Carlo simulation

To study the problem of electron heating in quasi-perpendicular shocks, under the combined effects of 'reversible' motion, in the shock electric potential and magnetic field, and wave-particle interactions a diffusion equation was derived, in the drift (adiabatic) approximation and it was solved by using a Monte Carlo method. The results show that most of the observations can be explained within this framework. The simulation has also definitively shown that the electron parallel temperature is determined by the dc electromagnetic field and not by any wave particle induced heating. Wave-particle interactions are effective in smoothing out the large gradients in phase space produced by the 'reversible' motion of the electrons, thus producing a 'cooling' of the electrons. Some constraints on the wave-particle interaction process may be obtained from a detailed comparison between the simulation and observations. In particular, it appears that the adiabatic approximation must be violated in order to explain the observed evolution of the perpendicular temperature.

Veltri, Pierluigi↗
NASA NTRS1991

Optical Isolators With Transverse Magnets

New design for isolator includes zigzag, forward-and-backward-pass beam path and use of transverse rather than longitudinal magnetic field. Design choices produce isolator with as large an aperture as desired using low-Verdet-constant glass rather than more expensive crystals. Uses commercially available permanent magnets in Faraday rotator. More compact and less expensive. Designed to transmit rectangular beam. Square cross section of beam extended to rectangular shape by increasing one dimension of glass without having to increase magnetic field. Potentially useful in laser systems involving slab lasers and amplifiers. Has applications to study of very-high-power lasers for fusion research.

Fan, Yuan X.↗
NASA NTRS1991

A two-dimensional, time-dependent, near-earth magnetotail

A kinetic approach is presented for obtaining slowly time-dependent, self-consistent plasma, and magnetic field configurations for this region, using anisotropic particle distributions. At present, a 2D configuration is used. The time variation of the plasma/field configuration is assumed to be driven by a slowly varying, externally imposed electric field (representing, for example, a change in solar wind conditions). The numerical approach involves solving a 2D nonlinear Poisson equation for the magnetic vector potential at each time step. The local current density is calculated from particle velocity distributions under the assumption of adiabatic particle motion. The obtained equations of state are compared with those of double-adiabatic theory. Numerical examples of self-consistent responses of the near-earth plasma and field to an externally imposed electric field pulse are presented.

Whipple, Elden↗
NASA NTRS1991

Coronal current-sheet formation - The effect of asymmetric and symmetric shears

A 2.5D numerical code is used to investigate the results of an asymmetric shear imposed on a potential quadrupolar magnetic field under two sets of atmospheric boundary conditions - a low-beta plasma with line tying at the base, similar to the line-tied analytic model, and a hydrostatic-equilibrium atmosphere with solar gravity, typical of the observed photosphere-chromosphere interface. The low-beta simulation confirms the crucial role of the line-tying assumption in producting current sheets. The effects of a symmetric shear on the same hydrostatic-equilibrium atmosphere is examined, using more grid points to improve the resolution of the current structures which form along the flux surfaces. It is found that true current sheets do not form in the corona when a more realistic model is considered. The amount of Ohmic dissipation in the thick currents is estimated to be two to four orders of magnitude below that required to heat the corona. It is concluded that magnetic topologies of the type examined here do not contribute significantly to coronal heating.

Karpen, Judith T.↗
NASA NTRS1994

The effects of Kelvin-Helmholtz instability on resonance absorption layers in coronal loops

One of the long-standing uncertainties in the wave-resonance theory of coronal heating is the stability of the resonance layer. The wave motions in the resonance layer produce highly localized shear flows which vary sinusoidally in time with the resonance period. This configuration is potentially susceptible to the Kelvin-Helmholtz instability (KHI), which can enhance small-scale structure and turbulent broadening of shear layers on relatively rapid ideal timescales. We have investigated numerically the response of a characteristic velocity profile, derived from resonance absorption models, to finite fluid perturbations comparable to photospheric fluctuations. We find that the KHI primarily should affect long (approximately greater than 6 x 10(exp 4) km) loops where higher velocity flows (M approximately greater than 0.2) exist in resonance layers of order 100 km wide. There, the Kelvin-Helmholtz growth time is comparable to or less than the resonance quarter-period, and the potentially stabilizing magnetic effects are not felt until the instability is well past the linear growth stage. Not only is the resonance layer broadened by the KHI, but also the convective energy transport out of the resonance layer is increased, thus adding to the efficiency of the wave-resonance heating process. In shorter loops, e.g., those in bright points and compact flares, the stabilization due to the magnetic field and the high resonance frequency inhibit the growth of the Kelvin-Helmholtz instability beyond a minimal level.

Karpen, Judith T.↗
NASA NTRS2003

Models And Experiments Of Laminar Diffusion Flames In Non-Uniform Magnetic Fields

Non-uniform magnetic fields affect laminar diffusion flames as a result of the paramagnetic and diamagnetic properties of the products and reactants. Paramagnetism is the weak attraction to a magnetic field a material exhibits as a result of permanent magnetic dipole moments in the atoms of the material. Diamagnetism is the weak repulsion to a magnetic field exhibited by a material due to the lack of permanent magnetic dipole moments in the atoms of a material. The forces associated with paramagnetic and diamagnetism are several orders of magnitude less than the forces associated with the more familiar ferromagnetism. A typical example of a paramagnetic gas is oxygen while hydrocarbon fuels and products of combustion are almost always diamagnetic. The fact that magnets can affect flame behavior has been recognized for more than one hundred years. Early speculation was that such behavior was due to the magnetic interaction with the ionized gases associated with a flame. Using a scaling analysis, it was later shown that for laminar diffusion flames the magnetic field/ionized gas interaction was insignificant to the paramagnetic and diamagnetic influences. In this effort, the focus has been on examining laminar diffusion slot flames in the presence of non-uniform upward decreasing magnetic fields produced using permanent magnets. The principal reason for choosing slot flames was mathematical models of such flames show an explicit dependence on gravitational body forces, in the buoyancy-controlled regime, and an applied magnetic field would also impose a body force. In addition, the behavior of such flames was more easily visualized while maintaining the symmetry of the two-dimensional problem whereas it would have been impossible to obtain a symmetric magnetic field around a circular flame and still visually record the flame height and shape along the burner axis. The motivation for choosing permanent magnets to produce the magnetic fields was the assumption that space-related technologies based on the knowledge gained during this investigation would more likely involve permanent magnets as opposed to electromagnets. While no analysis has been done here to quantify the impact that an electric field, associated with an electromagnetic, would have relative to the paramagnetic and diamagnetic interactions, by using permanent magnets this potential effect was completely eliminated and thus paramagnetic and diamagnetic effects were isolated.

Baker, J.↗
NASA NTRS2016

Biotube

Biotube was developed for plant gravitropic research investigating the potential for magnetic fields to orient plant roots as they grow in microgravity. Prior to flight, experimental seeds are placed into seed cassettes, that are capable of containing up to 10 seeds, and inserted between two magnets located within one of three Magnetic Field Chamber (MFC). Biotube is stored within an International Space Station (ISS) stowage locker and provides three levels of containment for chemical fixatives. Features include monitoring of temperature, fixative/ preservative delivery to specimens, and real-time video imaging downlink. Biotube's primary subsystems are: (1) The Water Delivery System that automatically activates and controls the delivery of water (to initiate seed germination). (2) The Fixative Storage and Delivery System that stores and delivers chemical fixative or RNA later to each seed cassette. (3) The Digital Imaging System consisting of 4 charge-coupled device (CCD) cameras, a video multiplexer, a lighting multiplexer, and 16 infrared light-emitting diodes (LEDs) that provide illumination while the photos are being captured. (4) The Command and Data Management System that provides overall control of the integrated subsystems, graphical user interface, system status and error message display, image display, and other functions.

Biotube↗
DOE OSTI2024

High-Fidelity Arc-Discharge Model for Hydrogen-Plasma-Smelting-Reduction of Iron Ore

Electrification and use of renewable hydrogen is currently a necessity for decarbonizing the iron-and-steel industry. In this regard, hydrogen plasma smelting reduction (HPSR) is a novel pathway that is being explored for reduction of iron ore. HPSR provides several decarbonization merits compared to conventional blast furnaces. Firstly, the use of renewable hydrogen drastically reduces the CO2 emissions compared to the use of coke. Secondly, renewable electricity in the form of a thermal plasma for making reactive hydrogen species (radicals, ions) are more efficient at reducing iron ore compared to neutral H2. Thirdly, a molten product compatible with downstream processes is obtained from the intense heat transfer from the plasma. However, the scale-up of this technology requires fundamental exploration of hydrogen plasma dynamics and its interaction with complex solid material that include phase changing iron-ore and slag. In this work, we present a first principles continuum scale model for thermal plasmas in Ar/H2 gas mixtures typically used for HPSR. The thermal plasma governing equations for mass, momentum and energy with Lorentz force and Joule heating source terms are solved along with electromagnetic equations for electrostatic and magnetic vector potential. Our solver will be based on Pele, a suite of reacting flow solvers designed for advanced scientific computing architectures (Henry De Frahan et al., Proceedings of SIAM Parallel Processing, 13-25, 2024), and will utilize adaptive mesh generation for enhanced resolutions at locations of intense physicochemical interactions. This study will present the impact of Ar to H2 ratios on excited/dissociated hydrogen species concentrations, plasma temperature and conductivity along with the impact of outgassed species (water, metal vapor, O, OH radicals) from ore surface on gas phase chemistry. Furthermore, the heat and species flux to the surface will be quantified as a function of applied voltages in a transferred arc configuration.

hydrogen plasma↗
NASA NTRS1976

Magnetic suspension techniques for large scale aerodynamic testing

The potential utility of magnetic suspension techniques is discussed in the context of current efforts towards realistic aerodynamic simulation in wind tunnels. Design parameters are defined and problems of constructing large size facilities identified. A three stage strategy towards realizing a truly large scale magnetic suspension and balance with full research capability is outlined. Stage one, consisting of building and testing a prototype superconductor coil system to establish the feasibility of the concept has been completed successfully and its principal results are briefly described. This proven feasibility of using superconductors for magnetic suspensions, together with the successful demonstration of the cryogenic wind tunnel concept, appear to have opened the way to clean tunnel, high-Re aerodynamic testing. Results of a comparative analysis of scaling of several coil technologies for a specific magnetic suspension configuration, from the prototype size to a size compatible with the projected high Reynolds number cryogenic wind tunnel facility, are discussed in some detail.

Zapata, R. N.↗
DOE OSTI2024

Direct Observation of Room–Temperature Magnetic Skyrmion Motion Driven by Ultra–Low Current Density in Van Der Waals Ferromagnets

The recent discovery of room-temperature ferromagnetism in 2D van der Waals (vdW) materials, such as Fe 3 GaTe 2 (FGaT), has garnered significant interest in offering a robust platform for 2D spintronic applications. Various fundamental operations essential for the realization of 2D spintronics devices are experimentally confirmed using these materials at room temperature, such as current-induced magnetization switching or tunneling magnetoresistance. Nevertheless, the potential applications of magnetic skyrmions in FGaT systems at room temperature remain unexplored. In this work, the current-induced generation of magnetic skyrmions in FGaT flakes employing high-resolution magnetic transmission soft X-ray microscopy is introduced, supported by a feasible mechanism based on thermal effects. Furthermore, direct observation of the current-induced magnetic skyrmion motion at room temperature in FGaT flakes is presented with ultra-low threshold current density. This work highlights the potential of FGaT as a foundation for room-temperature-operating 2D skyrmion device applications.

2D ferromagnets↗
NASA NTRS1990

A self-consistent two-dimensional resistive fluid theory of field-aligned potential structures including charge separation and magnetic and velocity shear

A self-consistent two-fluid theory that includes the magnetic field and shear patterns is developed to model stationary electrostatic structures with field-aligned potential drops. Shear flow is also included in the theory since this seems to be a prominent feature of the structures of interest. In addition, Ohmic dissipation, a Hall term, and pressure gradients in a generalized Ohm's law, modified for cases without quasi-neutrality, are included. In the analytic theory, the electrostatic force is balanced by field-aligned pressure gradients (i.e., thermal effects in the direction of the magnetic field) and by pressure gradients and magnetic stresses in the perpendicular direction. Within this theory, simple examples of applications are presented to demonstrate the kind of solutions resulting from the model. The results show how the effects of charge separation and shear in the magnetic field and the velocity can be combined to form self-consistent structures such as are found to exist above the aurora, suggested also in association with solar flares.

Hesse, Michael↗
NASA NTRS1977

Particle acceleration in axisymmetric, magnetized neutron stars

The potential drop in the polar cap region of a rotating, magnetized neutron star is found assuming that the magnetic field is dipolar, with the field aligned (or anti-aligned) with the rotation axis. The curvature of the field lines is of critical importance. Charge flow is assumed to be along magnetic field lines. The electric field has a maximum at radius 1.5 R and the magnitude and functional form of the current is determined.

Baker, K. B.↗
NASA NTRS1982

The coronal field lines of an evolving bipolar magnetic region

A simple potential field model is presented to illustrate that loops of magnetic flux rise upward through the corona during the relatively short growth phase of a bipolar magnetic region but contract back to the sun's surface during the much longer decay phase of the photospheric region. To reconcile this behavior with the unidirectional, solar-wind-driven convection of flux outward from the sun, one must postulate the existence of an X-type neutral line in the middle corona where open field lines can be converted back to closed ones.

Sheeley, N. R., Jr.↗