Search NASA⌕ Search

SEARCH · Search NASA

Results for “Match Machining”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Millimeter-wave double-dipole antennas for high-gain integrated reflector illumination

A double-dipole antenna backed by a ground plane has been fabricated for submillimeter wavelengths. The double-dipole antenna is integrated on a thin dielectric membrane with a planar detector at its center. Measured feed patterns at 246 GHz agree well with theory and demonstrate a rotationally symmetric pattern with high coupling efficiency to Gaussian beams. The input impedance is around 50 ohms, and will match well to a Schottky diode or SIS detector. The double-dipole antenna served as the feed for a small machined parabolic reflector. The integrated reflector had a measured gain of 37 dB at 119 microns. This makes the double-dipole antenna ideally suited as a feed for high resolution tracking or for long focal length Cassegrain antenna systems.

Filipovic, Daniel F.↗

Electrostatically clean solar array

Provided are methods of manufacturing an electrostatically clean solar array panel and the products resulting from the practice of these methods. The preferred method uses an array of solar cells, each with a coverglass where the method includes machining apertures into a flat, electrically conductive sheet so that each aperture is aligned with and undersized with respect to its matched coverglass sheet and thereby fashion a front side shield with apertures (FSA). The undersized portion about each aperture of the bottom side of the FSA shield is bonded to the topside portions nearest the edges of each aperture's matched coverglass. Edge clips are attached to the front side aperture shield edges with the edge clips electrically and mechanically connecting the tops of the coverglasses to the solar panel substrate. The FSA shield, edge clips and substrate edges are bonded so as to produce a conductively grounded electrostatically clean solar array panel.

Stern, Theodore Garry↗

NDCX-II, an Induction Linac for HEDP and IFE Research

The Heavy Ion Fusion Science Virtual National Laboratory in the USA is constructing a new Neutralized Drift Compression eXperiment (NDCX-II) at LBNL. This facility is being developed for high energy density physics and inertial fusion energy research. The 12 m long induction linac in NDCX-II will produce a Li{sup +} beam pulse, at energies of 1.2-3 MeV, to heat target material to the warm dense matter regime ({approx} 1 eV). By making use of special acceleration voltage waveforms, 2.5T solenoid focusing, and neutralized drift compression, 20 - 50 nC of beam charge from the ion source will be compressed longitudinally and radially to achieve a subnanosecond pulse length and mm-scale target spot size. The original Neutralized Drift Compression Experiment (NDCX-I) has successfully demonstrated simultaneous radial and longitudinal compression by imparting a velocity ramp to the ion beam, which then drifts in a neutralizing plasma to and through the final focussing solenoid and onto the target. At higher kinetic energy and current, NDCX-II will offer more than 100 times the peak energy fluence on target of NDCX-I. NDCX-II makes use of many parts from the decommissioned Advanced Test Accelerator (ATA) at LLNL. It includes 27 lattice periods between the injector and the neutralized drift compression section (Figure 1). There are 12 energized induction cells, 9 inactive cells which provide drift space, and 6 diagnostic cells which provide beam diagnostics and pumping. Custom pulsed power systems generate ramped waveforms for the first 7 induction cells, so as to quickly compress the beam from 600 ns at the injector down to 70 ns. After this compression, the high voltages of the ATA Blumleins are then used to rapidly add energy to the beam. The Blumleins were designed to match the ferrite core volt-seconds with pulses up to 250 kV and a fixed FWHM of 70 ns. The machine is limited to a pulse repetition rate of once every 20 seconds due to cooling requirements. The NDCX-II beam is highly space-charge dominated. The 1-D ASP code was used to synthesize high voltage waveform for acceleration, while the 3-D Warp particle-in-cell code was used for detailed design of the lattice. The Li{sup +} ion was chosen because its Bragg Peak energy (at {approx} 2 MeV) coincides with the NDCX-II beam energy. The 130 keV injector will have a 10.9 cm diameter ion source. Testing of small (0.64 cm diameter) lithium doped alumino-silicate ion sources has demonstrated the current density ({approx} 1 mA/cm{sup 2}) used in the design, with acceptable lifetime. A 7.6 cm diameter source has been successfully produced to verify that the coating method can be applied to such a large emitting area. The ion source will operate at {approx} 1275 C; thus a significant effort was made in the design to manage the 4 kW heating power and the associated cooling requirements. In modifying the ATA induction cells for NDCX-II, the low-field DC solenoids were replaced with 2.5 T pulsed solenoids. The beam pipe diameter was decreased in order to reduce the axial extent of the solenoid fringe fields and to make room for water cooling. In addition, an outer copper cylinder (water-cooled) was used to exclude the solenoid magnetic flux from the ferrite cores. Precise alignment is essential because the beam has a large energy spread due to the rapid pulse compression, such that misalignments lead to corkscrew deformation of the beam and reduced intensity at focus. A novel pulsed-wire measurement method is used to align the pulsed solenoid magnets. Alignment accuracy has been demonstrated to within 100 {micro}m of the induction cell axis. The neutralized drift compression region after the last induction cell is approximately 1.2 m long and includes ferroelectric plasma sources (FEPS) fabricated by PPPL similar to those successfully operating in NDCX-I. The 8-T final focus pulsed solenoid, filtered cathodic arc plasma sources (FCAPS), and target chamber from NDCX-I are to be relocated to NDCX-II. The NDCX-II project started in July 2009 and is expected to complete in fall of 2011. As future funds become available, additional induction cells and pulsed power systems will be added to increase the beam energy.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Shock compression of fused silica: An impedance matching standard

The properties of silica (SiO 2 ) at extreme conditions have important applications for planetary processes and for high pressure research. Here, we report the results of 125 plate impact shock compression experiments on fused silica spanning 200–1100 GPa using the Z machine at Sandia National Laboratories. Additionally, we present a complementary set of density functional theory based molecular dynamics calculations based on an amorphous reference state that extend the Hugoniot to 2500 GPa. We find good agreement between the Z data, extant laser driven shock compression experiment data, and computational results over most of the pressure range. With these results, fused silica can be used as a new impedance matching standard for shock compression experiments.

54 ENVIRONMENTAL SCIENCES↗

Prediction of the Cu Oxidation State from EELS and XAS Spectra Using Supervised Machine Learning

Electron energy loss spectroscopy (EELS) and X-ray absorption spectroscopy (XAS) provide detailed information about distributions and locations of atoms, their coordination numbers and oxidation states, and the bonding characteristics [1]. However, analysis of XAS/EELS data often relies on matching the spectra of an unknown experimental sample to a series of simulated or experimental spectra of standard samples. Here, this limits analysis throughput and the ability to extract quantitative information from a sample.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Preprocessing Prediction of Advanced Algorithms for Medical Imaging

Advanced medical imaging algorithms (such as bone removal, vessel segmentation, or a lung nodule detection) can provide extremely valuable information to the radiologists, but they might sometimes be very time consuming. Being able to run the algorithms in advance can be a possible solution. However, we do not know which algorithm to run on a given dataset before it is actually used. It is possible to manually insert matching rules for preprocessing algorithms, but it requires high maintenance and does not work well in practice. This paper presents a dynamic machine learning solution for predicting which advanced visualization (AV) algorithm needs to be applied on a given series. The system gets a handful of free text DICOM tags as an input and builds a model in the clinical setting. It incorporates a Bag of Words (BOW) feature extractor and a Random Forest classifier. The approach was tested on two datasets from clinical sites which use different languages and varying scanner models. We show that even without feature extraction, sensitivity of above 90% can be reached on both of them. By using BOW feature extractor, precision and sensitivity can usually be further improved. Even on a noisy and highly unbalanced dataset, only around 100 samples were needed to reach sensitivity of above 80% and specificity of above 97%. We show how the solution can be part of a Smart Preprocessing mechanism in a viewing software. Using such a system will ultimately minimize the time to launch studies and improve radiologists reading time efficiency.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Cataloging accreted stars within Gaia DR2 using deep learning

The goal of this study is to present the development of a machine learning based approach that utilizes phase space alone to separate the Gaia DR2 stars into two categories: those accreted onto the Milky Way from those that are in situ. Traditional selection methods that have been used to identify accreted stars typically rely on full 3D velocity, metallicity information, or both, which significantly reduces the number of classifiable stars. The approach advocated here is applicable to a much larger portion of Gaia DR2. Methods. A method known as “transfer learning” is shown to be effective through extensive testing on a set of mock Gaia catalogs that are based on the F IRE cosmological zoom-in hydrodynamic simulations of Milky Way-mass galaxies. The machine is first trained on simulated data using only 5D kinematics as inputs and is then further trained on a cross-matched Gaia /RAVE data set, which improves sensitivity to properties of the real Milky Way. Results. The result is a catalog that identifies ~767 000 accreted stars within Gaia DR2. This catalog can yield empirical insights into the merger history of the Milky Way and could be used to infer properties of the dark matter distribution.

Astronomy & Astrophysics↗

Machine Learning-Enabled Wearable Piezoelectric Acoustic Sensor for Real-Time Breast Abnormality Detection

In contemporary society, breast health has become a significant public health concern, particularly among women. According to statistics from the World Health Organization, both the incidence and mortality rates of breast tumors have steadily increased in recent years. Therefore, effective early-stage screening and postoperative monitoring are essential for maintaining breast health. However, conventional clinical diagnostic modalities are typically bulky, operationally complex, and unsuitable for continuous real-time monitoring, which limits their use in portable and everyday health management applications. To address these limitations, this study proposes a machine learning-integrated wearable piezoelectric sensing platform as an auxiliary tool for breast health assessment. The device consists of a PDMS matching layer embedded with flexible silver nanowires, a P(VDF-TrFE) piezoelectric layer, and a multi-channel low-noise signal acquisition circuit. It is capable of acquiring acoustic echo signals from tissue-mimicking environments and automatically evaluating signal validity using a convolutional neural network (CNN). By integrating piezoelectric sensing with deep learning-based signal analysis, the proposed system achieves a signal-to-noise ratio exceeding 70 dB and a real-time classification accuracy above 96% under controlled conditions. These results demonstrate that the platform provides a compact, portable, and intelligent approach for wearable sensing of mechanical heterogeneity and highlight its potential for future development in continuous biomedical monitoring technologies.

He, Shuaitong↗

Computation and parallel implementation for early vision

The problem of early vision is to transform one or more retinal illuminance images-pixel arrays-to image representations built out of such primitive visual features such as edges, regions, disparities, and clusters. These transformed representations form the input to later vision stages that perform higher level vision tasks including matching and recognition. Researchers developed algorithms for: (1) edge finding in the scale space formulation; (2) correlation methods for computing matches between pairs of images; and (3) clustering of data by neural networks. These algorithms are formulated for parallel implementation of SIMD machines, such as the Massively Parallel Processor, a 128 x 128 array processor with 1024 bits of local memory per processor. For some cases, researchers can show speedups of three orders of magnitude over serial implementations.

Gualtieri, J. Anthony↗

Motion detection in astronomical and ice floe images

Two approaches are presented for establishing correspondence between small areas in pairs of successive images for motion detection. The first one, based on local correlation, is used on a pair of successive Voyager images of the Jupiter which differ mainly in locally variable translations. This algorithm is implemented on a sequential machine (VAX 780) as well as the Massively Parallel Processor (MPP). In the case of the sequential algorithm, the pixel correspondence or match is computed on a sparse grid of points using nonoverlapping windows (typically 11 x 11) by local correlations over a predetermined search area. The displacement of the corresponding pixels in the two images is called the disparities to cubic surfaces. The disparities at points where the error between the computed values and the surface values exceeds a particular threshold are replaced by the surface values. A bilinear interpolation is then used to estimate disparities at all other pixels between the grid points. When this algorithm was applied at the red spot in the Jupiter image, the rotating velocity field of the storm was determined. The second method of motion detection is applicable to pairs of images in which corresponding areas can experience considerable translation as well as rotation.

Manohar, M.↗

Ten million and one penguins, or, lessons learned from booting millions of virtual machines on HPC systems.

In this paper we describe Megatux, a set of tools we are developing for rapid provisioning of millions of virtual machines and controlling and monitoring them, as well as what we've learned from booting one million Linux virtual machines on the Thunderbird (4660 nodes) and 550,000 Linux virtual machines on the Hyperion (1024 nodes) clusters. As might be expected, our tools use hierarchical structures. In contrast to existing HPC systems, our tools do not require perfect hardware; that all systems be booted at the same time; and static configuration files that define the role of each node. While we believe these tools will be useful for future HPC systems, we are using them today to construct botnets. Botnets have been in the news recently, as discoveries of their scale (millions of infected machines for even a single botnet) and their reach (global) and their impact on organizations (devastating in financial costs and time lost to recovery) have become more apparent. A distinguishing feature of botnets is their emergent behavior: fairly simple operational rule sets can result in behavior that cannot be predicted. In general, there is no reducible understanding of how a large network will behave ahead of 'running it'. 'Running it' means observing the actual network in operation or simulating/emulating it. Unfortunately, this behavior is only seen at scale, i.e. when at minimum 10s of thousands of machines are infected. To add to the problem, botnets typically change at least 11% of the machines they are using in any given week, and this changing population is an integral part of their behavior. The use of virtual machines to assist in the forensics of malware is not new to the cyber security world. Reverse engineering techniques often use virtual machines in combination with code debuggers. Nevertheless, this task largely remains a manual process to get past code obfuscation and is inherently slow. As part of our cyber security work at Sandia National Laboratories, we are striving to understand the global network behavior of botnets. We are planning to take existing botnets, as found in the wild, and run them on HPC systems. We have turned to HPC systems to support the creation and operation of millions of Linux virtual machines as a means of observing the interaction of the botnet and other noninfected hosts. We started out using traditional HPC tools, but these tools are designed for a much smaller scale, typically topping out at one to ten thousand machines. HPC programming libraries and tools also assume complete connectivity between all nodes, with the attendant configuration files and data structures to match; this assumption holds up very poorly on systems with millions of nodes.

99 GENERAL AND MISCELLANEOUS↗

Identification of integrated proteomics and transcriptomics signature of alcohol-associated liver disease using machine learning

Distinguishing between alcohol-associated hepatitis (AH) and alcohol-associated cirrhosis (AC) remains a diagnostic challenge. In this study, we used machine learning with transcriptomics and proteomics data from liver tissue and peripheral mononuclear blood cells (PBMCs) to classify patients with alcohol-associated liver disease. The conditions in the study were AH, AC, and healthy controls. We processed 98 PBMC RNAseq samples, 55 PBMC proteomic samples, 48 liver RNAseq samples, and 53 liver proteomic samples. First, we built separate classification and feature selection pipelines for transcriptomics and proteomics data. The liver tissue models were validated in independent liver tissue datasets. Next, we built integrated gene and protein expression models that allowed us to identify combined gene-protein biomarker panels. For liver tissue, we attained 90% nested-cross validation accuracy in our dataset and 82% accuracy in the independent validation dataset using transcriptomic data. We attained 100% nested-cross validation accuracy in our dataset and 61% accuracy in the independent validation dataset using proteomic data. For PBMCs, we attained 83% and 89% accuracy with transcriptomic and proteomic data, respectively. The integration of the two data types resulted in improved classification accuracy for PBMCs, but not liver tissue. We also identified the following gene-protein matches within the gene-protein biomarker panels: CLEC4M-CLC4M, GSTA1-GSTA2 for liver tissue and SELENBP1-SBP1 for PBMCs. In this study, machine learning models had high classification accuracy for both transcriptomics and proteomics data, across liver tissue and PBMCs. The integration of transcriptomics and proteomics into a multi-omics model yielded improvement in classification accuracy for the PBMC data. The set of integrated gene-protein biomarkers for PBMCs show promise toward developing a liquid biopsy for alcohol-associated liver disease.

60 APPLIED LIFE SCIENCES↗

Development of Machine Learning Algorithms to Segment and Study Images of Astromaterial Samples

Introduction: Micrometer-scale chemical analyses of chondritic meteorites and mission-returned asteroid samples can reveal details of the physical and chemical processes operating in the early solar system, including processes that gave rise to planets, moons, and minor bodies. These primitive astromaterials are comprised of chondrules, calcium- and aluminum-rich inclusions (CAI), and many other silicates, oxides, metals, sulfides, and fine-grained materials. The chemical and mineralogical complexity of these samples, vast populations of different components, and heterogeneity across mm to km scales, all limit our understanding of the origin and evolution of these materials. Here, we describe recent efforts to use machine learning techniques to automate the segmentation of chemical maps of chondritic meteorites, designed to aid studies of asteroid samples returned by spacecraft. By automating the task of segmentation it will become possible to rapidly analyze and interpret the sizes, shapes, mineralogy, chemistry, and other properties of every chondrule, calcium- and aluminum-rich inclusion (CAI) and other clast within and between asteroid samples. Sample return missions significantly accelerate and heighten the need to develop such new data analysis techniques, and associated data repositories. Techniques: Neural networks require abundant training data, i.e. images which have been segmented by a human user. We have manually segmented data available from previous petrologic and chemical work at NASA Johnson Space Center and the American Museum of Natural History [1-4]. These data were derived from energy- and wavelength-dispersive X-ray spectroscopy (EDS, WDS) mapping of samples from many chondrite groups. The Deeplabv3+ [5] neural network architecture was trained on human-labeled masks and used to create machine-labeled masks. Several different algorithms were investigated, with inputs ranging from common RGB image formats through to hyperspectral datasets, with raw data comprising greyscale maps of Mg, Ca, and Al, with or without Si, Fe, Ti for both EDS and WDS data, and extending to other elements in EDS only. Each greyscale image was paired with a binary mask for each labelled particle type. Results: The trained algorithms can segment (Fig 1), classify, and measure the dimensions of thousands of particles in chemical maps of a standard 1-inch round petrographic section in seconds to minutes, rather than many hours needed by a human. Accuracy of the algorithms varied from chondrite to chondrite and across particle types. Further results and details of the algorithms will be presented at the workshop. Future directions: Machine learning has the potential to revolutionize our understanding of complex particle populations contained within primitive astromaterial, with segmentation being a critical first step. Example applications include better understanding of particle transport, nebular reservoirs, parent body accretion, and a deeper understanding of the relationships between particle populations and bulk rock elemental and isotopic compositions. In addition to benefits that machine learning can bring to individual researchers, building a community data repository of thousands to millions of particles across hundreds of samples will open up many other possibilities. For example, with a large enough dataset it will be possible to search for exceptionally closely matching particles across disparate samples. Such a capability would enable a single CAI from OSIRISREx or Hayabusa/II samples to be matched to chondritic CAIs that exhibit near-identical size, texture, and mineralogy, down to the level of similar core phenocrysts, zonation, and rim sequences. Such comparative analyses will help to disentangle precursor chemistry, chronology, gas/dust reservoirs during heating, and accretion. Such an endeavor would be impossible without machine learning and a large community data repository of astromaterial chemical/mineralogic maps.

Machine Learning↗

Sparse distributed memory

Sparse distributed memory was proposed be Pentti Kanerva as a realizable architecture that could store large patterns and retrieve them based on partial matches with patterns representing current sensory inputs. This memory exhibits behaviors, both in theory and in experiment, that resemble those previously unapproached by machines - e.g., rapid recognition of faces or odors, discovery of new connections between seemingly unrelated ideas, continuation of a sequence of events when given a cue from the middle, knowing that one doesn't know, or getting stuck with an answer on the tip of one's tongue. These behaviors are now within reach of machines that can be incorporated into the computing systems of robots capable of seeing, talking, and manipulating. Kanerva's theory is a break with the Western rationalistic tradition, allowing a new interpretation of learning and cognition that respects biology and the mysteries of individual human beings.

Denning, Peter J.↗

Adaptation of existing facilities to isentropic compression experiments

We demonstrate that the established pulsed power infrastructure at the National High Magnetic Field Laboratory - Pulsed Field Facility (NHMFL-PFF) at the Los Alamos National Laboratory can be adapted to obtain high quality isentropic compression experiment (ICE) data on materials in extreme conditions of dynamic high pressure. Experiments utilized a single-turn magnet pulsed power system at the NHMFL-PFF that was originally designed to measure actinide samples in extremes of high magnetic field (to 300 Tesla). A simple modification to the single-turn magnet has converted it to a fast turnaround dynamic high pressure measurement system. This paper details the work done including important background details that indicate that much more can be accomplished with optimization of the load characteristics in terms of ultimate peak pressures. To match the rise time of the NHMFL capacitor bank ({approx}2 {mu}s versus {approx}0.5 {mu}s for the Sandia Z-machine) the sample dimensions can be relatively large, i.e., up to 5 mm thickness. The maximum stresses are {approx}50GPa (0.5 Mbar) at the maximum bank voltage (60 kV) and higher pressures may be possible if the sample is tamped. For the design and predictions of performance of the NHMFL-ICE experiment it is important to have good predictive models. A SPICE code simulation was chosen to model all aspects of the experiment, electrical and physical. To this end, accurate dynamic load models were developed to simulate the compression and expansion of the dynamic load at high pressures using shock physics principles. A series experiments have been performed which demonstrated the feasibility of the NHMFL-ICE technique. The results will be shown and discussed. The NHMFL-ICE technique is an excellent method for measuring equations of state (EOS) at megabar pressures. Because a complete EOS can be obtained in one experiment from zero to the peak pressure, and because many shots can be fired in one day, the technique promises to provide high quality EOS data at relatively low cost.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Design Considerations for Proposed Fermilab Integrable RCS

Integrable optics is an innovation in particle accelerator design that provides strong nonlinear focusing while avoiding parametric resonances. One promising application of integrable optics is to overcome the traditional limits on accelerator intensity imposed by betatron tune-spread and collective instabilities. The efficacy of high-intensity integrable accelerators will be undergo comprehensive testing over the next several years at the Fermilab Integrable Optics Test Accelerator (IOTA) and the University of Maryland Electron Ring (UMER). We propose an integrable Rapid-Cycling Synchrotron (iRCS) as a replacement for the Fermilab Booster to achieve multi-MW beam power for the Fermilab high-energy neutrino program. We provide a overview of the machine parameters and discuss an approach to lattice optimization. Integrable optics requires arcs with integer-pi phase advance followed by drifts with matched beta functions. We provide an example integrable lattice with features of a modern RCS - long dispersion-free drifts, low momentum compaction, superperiodicity, chromaticity correction, separate-function magnets, and bounded beta functions.

43 PARTICLE ACCELERATORS↗

Beyond the hubble sequence – exploring galaxy morphology with unsupervised machine learning

We explore unsupervised machine learning for galaxy morphology analyses using a combination of feature extraction with a vector-quantized variational autoencoder (VQ-VAE) and hierarchical clustering (HC). We propose a new methodology that includes: (1) consideration of the clustering performance simultaneously when learning features from images; (2) allowing for various distance thresholds within the HC algorithm; (3) using the galaxy orientation to determine the number of clusters. This set-up provides 27 clusters created with this unsupervised learning that we show are well separated based on galaxy shape and structure (e.g. Sérsic index, concentration, asymmetry, Gini coefficient). These resulting clusters also correlate well with physical properties such as the colour–magnitude diagram, and span the range of scaling relations such as mass versus size amongst the different machine-defined clusters. When we merge these multiple clusters into two large preliminary clusters to provide a binary classification, an accuracy of $\sim 87{{\ \rm per\ cent}}$ is reached using an imbalanced data set, matching real galaxy distributions, which includes 22.7 per cent early-type galaxies and 77.3 per cent late-type galaxies. Comparing the given clusters with classic Hubble types (ellipticals, lenticulars, early spirals, late spirals, and irregulars), we show that there is an intrinsic vagueness in visual classification systems, in particular galaxies with transitional features such as lenticulars and early spirals. Based on this, the main result in this work is not how well our unsupervised method matches visual classifications and physical properties, but that the method provides an independent classification that may be more physically meaningful than any visually based ones.

79 ASTRONOMY AND ASTROPHYSICS↗

Technical Note: On the impact of the incident electron beam energy on the primary dose component of flattening filter free photon beams

Purpose: For commercially available linear accelerators (Linacs), the electron energies of flattening filter free (FFF) and flattened (FF) beams are either identical or the electron energy of the FFF beam is increased to match the percentage depth dose curve (PDD) of the FF beam (in reference geometry). This study focuses on the primary dose components of FFF beams for both kinds of settings, studied on the same Linac. Methods: The measurements were conducted on a VersaHD Linac (Elekta, Crawley, UK) for both FF and FFF beams with nominal energies of 6 and 10 MV. In the clinical setting of the VersaHD, the energy of FFF{sub M} (Matched) beams is set to match the PDDs of the FF beams. In contrast the incident electron beam of the FFF{sub U} beam was set to the same energy as for the FF beam. Half value layers (HVLs) and a dual parameter beam quality specifier (DPBQS) were determined. Results: For the 6 MV FFF{sub M} beam, HVL and DPBQS values were very similar compared to those of the 6 MV FF beam, while for the 10 MV FFF{sub M} and FF beams, only %dd(10){sub x} and HVL values were comparable (differences below 1.5%). This shows that matching the PDD at one depth does not guarantee other beam quality dependent parameters to be matched. For FFF{sub U} beams, all investigated beam quality specifiers were significantly different compared to those for FF beams of the same nominal accelerator potential. The DPBQS of the 6 MV FF and FFF{sub M} beams was equal within the measurement uncertainty and was comparable to published data of a machine with similar TPR{sub 20,10} and %dd(10){sub x}. In contrast to that, the DPBQS’s two parameters of the 10 MV FFF{sub M} beam were substantially higher compared to those for the 10 MV FF beam. Conclusions: PDD-matched FF and FFF beams of both nominal accelerator potentials were observed to have similar HVL values, indicating similarity of their primary dose components. Using the DPBQS revealed that the mean attenuation coefficient was found to be the same within the uncertainty of 0.8% for 6 MV FF and 6 MV FFF{sub M} beams, while for 10 MV beams, they differed by 6.4%. This shows that the DPBQS can provide a differentiation of photon beam characteristics that would remain hidden by the use of a single beam quality specifier, such as %dd(10){sub x} or HVL.

61 RADIATION PROTECTION AND DOSIMETRY↗