SEARCH · Search NASA

Results for “Measure control”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

All sources NASA NTRS DOE OSTI

NASA NTRS2000

Transport and Mixing in the Stratosphere and Troposphere

Long-term changes in the composition of the atmosphere are known to have significant effects on atmospheric chemistry and stratospheric ozone. Increasing levels of greenhouse gases have the potential to change the global climate in the middle and upper atmospheres, as well as in the troposphere. Volcanic eruptions, El Nino events, and other natural variations can also cause changes in atmospheric composition and climate. Whether the causes are natural or manmade, changes in the global climate system can have impacts on human society. In order to understand and predict the consequences of these changes, and of control measures such as the Montreal Protocol, it is necessary to understand the complex interactions between radiation, chemistry, and dynamics in the atmosphere. Much of the uncertainty in our understanding of atmospheric processes comes from an incomplete understanding of atmospheric transport. A complete and self-consistent model of transport requires not only an understanding of trace-species transport, but also the transport of dynamically active quantities such as heat and potential vorticity. Therefore, the goal of the proposed research is to better understand large-scale transport and mixing processes in the middle atmosphere and troposphere.

Bowman, Kenneth P.↗

NASA NTRS2001

Evaluation and Improvement of Eddy Current Position Sensors in Magnetically Suspended Flywheel Systems

Eddy current position sensor performance is evaluated for use in a high-speed flywheel development system. The flywheel utilizes a five axis active magnetic bearing system. The eddy current sensors are used for position feedback for the bearing controller. Measured characteristics include sensitivity to multiple target materials and susceptibility to noise from the magnetic bearings and from sensor-to-sensor crosstalk. Improvements in axial sensor configuration and techniques for noise reduction are described.

Dever, Timothy P.↗

NASA NTRS2001

The Effect of Regional Climate Variability on Outbreak of Bartonellosis Epidemics in Peru

Bartonellosis is a vector-borne, highly fatal, emerging infectious disease, which has been known in the Peruvian Andes since the early 1600s and has continued to be a problem in many mountain valleys in Peru and other Andean South American countries. The causative bacterium, Bartonella bacilliformis (Bb), is believed to be transmitted to humans by bites of the sand fly Lutzomyia verrucarum. According to available medical records, the transmission of infection often occurs in river valleys of the Andes Mountains at an altitude between 800 and 3500 meters above sea level. It shows a seasonal pattern, which usually begins to rise in December, peaks in February and March, and is at its lowest from July until November. The epidemics of bartonellosis also vary interannually, occurring every four to eight years, and appear to be associated with the El Nino cycle. In response to the National Oceanic and Atmospheric Administration (NOAA) announcement on climate variability and human health, which was constructed to stimulate integrated multidisciplinary research in the area of climate variability and health interactions, we have conducted a study to investigate the relationship between the El Nino induced regional climate variation and the outbreak of bartonellosis epidemics in Peru. Two test sites, Caraz and Cusco, were selected for this study. According to reports, Caraz has a long-standing history of endemic transmission and Cusco, which is located about five degrees poleward of Caraz, had no recorded epidemics until the most recent 1997/1998 El Nino event. The goal of this study is to clarify the relative importance of climatic risk factors for each area that could be predicted in advance, thus allowing implementation of cost-effective control measures, which would reduce disease morbidity and mortality.

Zhou, Jia-Yu↗

NASA NTRS2002

Ionospheric Electron/Ion Densities Temperatures on CD-ROM and WWW

As part of this project a large volume of ionospheric satellite insitu data from the sixties, seventies and early eighties were made accessible online in ASCII format for public use. This includes 14 data sets from the BE-B, Alouette 2, DME-A, AE-B, ISIS-1, ISIS-2, OGO-6, DE-2, AEROS-A, AE-C, AE-D, AE-E, and Hinotori satellites. The original data existed in various machine-specific, highly compressed, binary encoding on 7-, or 9-track magnetic tapes. The data were decoded and converted to a common ASCII data format, solar and magnetic indices were added, and some quality control measures were taken. The original intent of producing CD-ROMs with these data was overtaken by the rapid development of the Internet. Most users now prefer to obtain the data directly online and greatly value WWW-interfaces to browse, plot and subset the data. Accordingly the data were made available online on the anonymous ftp site of NASA's National Space Science Data Center (NSSDC) at ftp://nssdcftp.gsfc.nasa.gov/spacecraft data/ and on NSSDC's ATMOWeb (http://nssdc.gsfc.nasa.gov/atmoweb/), a WWW-interface for plotting, subsetting, and downloading the data. Several new features were implemented into ATMOWeb as part of this project including a filtering and scatter plot capability. The availability of this new database and WWW system was announced through several electronic mailer (AGU, CEDAR, IRI, etc) and through talks and posters during scientific meetings.

Bilitza, Dieter↗

NASA NTRS2004

Anticipated Effectiveness of Active Noise Control in Propeller Aircraft Interiors as Determined by Sound Quality Tests

Two experiments were conducted, using sound quality engineering practices, to determine the subjective effectiveness of hypothetical active noise control systems in a range of propeller aircraft. The two tests differed by the type of judgments made by the subjects: pair comparisons in the first test and numerical category scaling in the second. Although the results of the two tests were in general agreement that the hypothetical active control measures improved the interior noise environments, the pair comparison method appears to be more sensitive to subtle changes in the characteristics of the sounds which are related to passenger preference.

Powell, Clemans A.↗

NASA NTRS1949

The Influence of the Application of Power during Spin Recovery of Multiengine Airplanes

The effect of application of power, so far not clarified, is investigated in the present report in order to give the pilot, in addition to the control measures, an expedient for spin recovery of multiengine airplanes. To this end, a series of spins was performed with an airplane of the Go 150 type. It was possible to set up a uniform rule regarding the effect of power, for right end left spins as well as for any combination of the direction of rotation of the propellers.

Hoehler, P.↗

NASA NTRS2005

Nanotechnology Presentation Agenda

Working at the atomic, molecular and supra-molecular levels, in the length scale of approximately 1 - 100 nm range, in order to understand, create and use materials, devices and systems with fundamentally new properties and functions because of their small structure. NNI definition encourages new contributions that were not possible.before. Novel phenomena, properties and functions at nanoscale,which are non scalable outside of the nm domain. The ability to measure / control / manipulate matter at the nanoscale in order to change those properties and functions. Integration along length scales, and fields of application.

Source record↗

NASA NTRS2004

T/R module development for large aperture L-band phased array

This paper describes a transmit / receive (T/R) module for a large L-band space based radar active phased array being developed at JPL. Electrical performance and construction techniques are described, with emphasis on the former. The T/R modules have a bandwidth of more than 80 MHz centered at 1260MHz and support dual, switched polarizations. Phase and amplitude are controlled by a 6-bit phase shifter and a 6-bit attenuator, respectively. The transmitter power amplifier generates 2.4 W into a nominal 50 ohm load with 36% overall efficiency. The receiver noise figure is 4.4 dB including all front-end losses. The module weighs 32 g and has a footprint of 8 cm x 4.5 cm. Fourteen of these T/R modules were fabricated at the JPL Pick-and-Place Facility and were tested using a computer-controlled measurement facility developed at JPL. Calibrated performance of this set of T/R modules is presented and shows good agreement with design predictions.

transmit / receive (T/R) module↗

NASA NTRS2003

Microbial certification of the MER spacecraft

We conclude in this paper that a combination of Dry Heat Microbrial Reduction and control measures during complex mechanical assembly processes can result in a total spore bioburden that meets requirements.

spore bioburden MER spacecraft bacteria bar code↗

NASA NTRS2010

Modeling Influenza Transmission Using Environmental Parameters

Influenza is an acute viral respiratory disease that has significant mortality, morbidity and economic burden worldwide. It infects approximately 5-15% of the world population, and causes 250,000 500,000 deaths each year. The role of environments on influenza is often drawn upon the latitude variability of influenza seasonality pattern. In regions with temperate climate, influenza epidemics exhibit clear seasonal pattern that peak during winter months, but it is not as evident in the tropics. Toward this end, we developed mathematical model and forecasting capabilities for influenza in regions characterized by warm climate Hong Kong (China) and Maricopa County (Arizona, USA). The best model for Hong Kong uses Land Surface Temperature (LST), precipitation and relative humidity as its covariates. Whereas for Maricopa County, we found that weekly influenza cases can be best modelled using mean air temperature as its covariates. Our forecasts can further guides public health organizations in targeting influenza prevention and control measures such as vaccination.

Soebiyanto, Radina P.↗

NASA NTRS2010

Tactile Cueing as a Gravitational Substitute for Spatial Navigation During Parabolic Flight

INTRODUCTION: Spatial navigation requires an accurate awareness of orientation in your environment. The purpose of this experiment was to examine how spatial awareness was impaired with changing gravitational cues during parabolic flight, and the extent to which vibrotactile feedback of orientation could be used to help improve performance. METHODS: Six subjects were restrained in a chair tilted relative to the plane floor, and placed at random positions during the start of the microgravity phase. Subjects reported their orientation using verbal reports, and used a hand-held controller to point to a desired target location presented using a virtual reality video mask. This task was repeated with and without constant tactile cueing of "down" direction using a belt of 8 tactors placed around the mid-torso. Control measures were obtained during ground testing using both upright and tilted conditions. RESULTS: Perceptual estimates of orientation and pointing accuracy were impaired during microgravity or during rotation about an upright axis in 1g. The amount of error was proportional to the amount of chair displacement. Perceptual errors were reduced during movement about a tilted axis on earth. CONCLUSIONS: Reduced perceptual errors during tilts in 1g indicate the importance of otolith and somatosensory cues for maintaining spatial awareness. Tactile cueing may improve navigation in operational environments or clinical populations, providing a non-visual non-auditory feedback of orientation or desired direction heading.

Montgomery, K. L.↗

NASA NTRS2001

Assessment of Air Quality in the Shuttle and International Space Station (ISS) Based on Samples Returned by STS-104 at the Conclusion of 7A

The toxicological assessment of air samples returned at the end of the STS-l04 (7 A) flight to the ISS is reported. ISS air samples were taken in June and July 2001 from the Service Module, FGB, and U.S. Laboratory using grab sample canisters (GSCs) and/or formaldehyde badges. Preflight and end-of-mission samples were obtained from Atlantis using GSCs. Solid sorbent air sampler (SSAS) samples were obtained from the ISS in April, June, and July. Analytical methods have not changed from earlier reports, and all quality control measures were met.

James, John T.↗

NASA NTRS2012

James Webb Space Telescope: Large Deployable Cryogenic Telescope in Space

The James Webb Space Telescope (JWST) is an infrared space telescope designed to explore four major science themes: first light and reionization, the assembly of galaxies, the birth of stars and protoplanetary systems, and planetary systems and origins of life. JWST is a segmented architecture telescope with an aperture of 6.6 m. It will operate at cryogenic temperature (40 K), achieved via passive cooling, in an orbit about the Earth-Sun second Lagrange point (L2). Passive cooling is facilitated by means of a large sunshield that provides thermal isolation and protection from direct illumination from the Sun. The large size of the telescope and spacecraft systems require that they are stowed for launch in a configuration that fits the Ariane 5 fairing, and then deployed after launch. Routine wavefront sensing and control measurements are used to achieve phasing of the segmented primary mirror and initial alignment of the telescope. A suite of instruments will provide the capability to observe over a spectral range from 0.6- to 27-micron wavelengths with imaging and spectroscopic configurations. An overview is presented of the architecture and selected optical design features of JWST are described

Lightsey, Paul A.↗

NASA NTRS2015

A Decade of Change in NO2 and SO2 over the Canadian Oil Sands As Seen from Space

A decade (20052014) of observations from the Ozone Monitoring Instrument (OMI) were used to examine trends in nitrogen dioxide(NO2) and sulfur dioxide (SO2) over a large region of western Canada and the northern United States, with a focus on the Canadian oil sands. In the oil sands, primarily over an area of intensive surface mining, NO2 tropospheric vertical column densities (VCDs) are seen to be increasing by as much as 10year, with the location of the largest trends in a newly developing NO2 lobe well removed from surface monitoring stations. SO2 VCDs in the oil sands have remained approximately constant. The only other significant increase in the region was seen in NO2 over Bakken gas fields in North Dakota which showed increases of up to5yr. By contrast, other locations in the region show substantial declines in both pollutants, providing strong evidence to the efficacy of environmental pollution control measures implemented by both nations. The OMI-derived trends were found to be consistent with those from the Canadian surface monitoring network, although in the case of SO2, it was necessary to apply a correction in order to remove the residual signal from volcanic eruptions present in the OMI data.

NO2↗

NASA NTRS2017

Optimal Control Allocation with Load Sensor Feedback for Active Load Suppression

These slide sets describe the OCLA formulation and associated algorithms as a set of new technologies in the first practical application of load limiting flight control utilizing load feedback as a primary control measurement. Slide set one describes Experiment Development and slide set two describes Flight-Test Performance.

Miller, Christopher↗

NASA NTRS2017

Optimal Control Allocation with Load Sensor Feedback for Active Load Suppression

Miller, Christopher↗

NASA NTRS2016

Natural and Anthropogenic Aerosol Trends from Satellite and Surface Observations and Model Simulations over the North Atlantic Ocean from 2002 to 2012

Aerosols contribute to Earths radiative budget both directly and indirectly, and large uncertainties remain in quantifying aerosol effects on climate. Variability in aerosol distribution and properties, as might result from changing emissions and transport processes, must be characterized. In this study, variations in aerosol loading across the eastern seaboard of theUnited States and theNorthAtlanticOcean during 2002 to 2012 are analyzed to examine the impacts of anthropogenic emission control measures using monthly mean data from MODIS, AERONET, and IMPROVE observations and Goddard Chemistry Aerosol Radiation and Transport (GOCART) model simulation.MODIS observes a statistically significant negative trend in aerosol optical depth (AOD) over the midlatitudes (-0.030 decade(sup-1)). Correlation analyses with surface AOD from AERONET sites in the upwind region combined with trend analysis from GOCART component AOD confirm that the observed decrease in the midlatitudes is chiefly associated with anthropogenic aerosols that exhibit significant negative trends from the eastern U.S. coast extending over the western North Atlantic. Additional analysis of IMPROVE surface PM(sub 2.5) observations demonstrates statistically significant negative trends in the anthropogenic components with decreasing mass concentrations over the eastern United States. Finally, a seasonal analysis of observational datasets is performed. The negative trend seen by MODIS is strongest during spring (MAM) and summer (JJA) months. This is supported by AERONET seasonal trends and is identified from IMPROVE seasonal trends as resulting from ammonium sulfate decreases during these seasons.

Jongeward, Andrew R.↗

NASA NTRS2017

Developing Model Benchtop Systems for Microbial Experimental Evolution

Understanding how microbes impact an ecosystem has improved through advances of molecular and genetic tools, but creating complex systems that emulate natural biology goes beyond current technology. In fact, many chemical, biological, and metabolic pathways of even model organisms are still poorly characterized. Even then, standard laboratory techniques for testing microbial impact on environmental change can have many drawbacks; they are time-consuming, labor intensive, and are at risk of contamination. By having an automated process, many of these problems can be reduced or even eliminated. We are developing a benchtop system that can run for long periods of time without the need for human intervention, involve multiple environmental stressors at once, perform real-time adjustments of stressor exposure based on current state of the population, and minimize contamination risks. Our prototype device allows operators to generate an analogue of real world micro-scale ecosystems that can be used to model the effects of disruptive environmental change on microbial ecosystems. It comprises of electronics, mechatronics, and fluidics based systems to control, measure, and evaluate the before and after state of microbial cultures from exposure to environmental stressors. Currently, it uses four parallel growth chambers to perform tests on liquid cultures. To measure the population state, optical sensors (LED/photodiode) are used. Its primary selection pressure is UV-C radiation, a well-studied stressor known for its cell- and DNA-damaging effects and as a mutagen. Future work will involve improving the current growth chambers, as well as implementing additional sensors and environmental stressors into the system. Full integration of multiple culture testing will allow inter-culture comparisons. Besides the temperature and OD sensors, other types of sensors can be integrated such as conductivity, biomass, pH, and dissolved gasses such as CO and O. Additional environmental stressor systems like temperature (extreme heat or cold), metal toxicity, and other forms of radiation will increase the scale and testing range.

Developing↗