Search NASA⌕ Search

SEARCH · Search NASA

Results for “Microwave heating”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Low-pressure microwave plasma nucleation and deposition of diamond films

Low-pressure microwave plasma nucleation and deposition of diamond films were investigated in the pressure range 10-mtorr to 10 torr, at substrate temperatures 400-750 C and with CH4 and O2 concentrations in H2 plasma of 2-15 percent and 2-10 percent, respectively. The experiments were performed in a microwave plasma system consisting of a microwave plasma chamber, a downstream deposition chamber, and an RF induction heated sample stage. Scanning electron microscopy of diamond films deposited at 600 C with 5 percent CH4 and 5 percent O2 in H2 plasmas showed high-quality well faceted crystallites of 1/2 micron size. Cathodoluminescence measurements of these films showed very few nitrogen impurities and no detectable silicon impurities.

Shing, Y. H.↗

Television Transmission Technology

The VKP-7990 Multistage Depressed Collector (MDC) Klystron is a result of cooperative development by Varian Associates, Inc., the National Association of Broadcasters, Lewis Research Center, the Public Broadcasting System and TV transmitter manufacturers. The effort was initiated to make power amplifying devices with efficiencies comparable to VHF available to UHF operators. The klystron is a vacuum tube used to generate and amplify ultrahigh frequencies but at low efficiencies because most of the energy is dissipated as waste heat. Lewis had earlier developed the MDC to enhance the efficiency of communications satellite transmissions. Varian Microwave Power Tube Products, which has since become Communications and Power Industries, and Lewis combined the MDC and the klystron, resulting in a product which increases efficiency by recovering some of the residual energy that normally would be lost as heat. The MDC klystron cuts the electric power consumption of UHF-TV transmitters in half; there are 90 units in operation in 36 UHF-TV stations.

Source record↗

Observations of Land Surface Variability Using Passive Microwave Sensing

Understanding the global variability of land surface wetness (soil moisture), skin temperature, and related surface fluxes of heat and moisture is key to assessing the importance of the land surface in influencing climate. The feasibility of producing model estimates of these quantities is being studied as part of the International Satellite Land Surface Climatology Project (ISLSCP) Global Soil Wetness Project (GSWP). In the GSWP approach, meteorological observations and analyses are used to drive global circulation models. Satellite measurements can provide independent estimates of key land surface parameters that are needed for initializing and validating the climate models and for monitoring long-term change. Satellite observations of the land surface can also be assimilated into soil models to estimate moisture in the root zone. In our research, passive microwave satellite data recorded during 1978-1987 from the Nimbus-7 Scanning Multichannel Microwave Radiometer (SMMR) are being used to examine spatial and temporal trends in surface soil moisture, vegetation, and temperature. These data include observations at C and X bands (6.6 and 10.7 GHz), which are not available on the current Special Sensor Microwave/Imager (SSM/I) and are precursors to data that will become available from the Advanced Microwave Scanning Radiometer (AMSR) on Advanced Earth Observing Satellite (ADEOS-II) and Earth Observing System (EOS) PM1 in the year 2000. A chart shows a time-series of SMMR-derived surface temperature, T-e and surface soil moisture M, retrieved on a 0.5 deg x 0.5 deg grid and further averaged over a 4 deg x 10 deg study region in the African Sahel. Also shown are National Center for Environmental Prediction (NCEP) model outputs of surface temperature, T-sfc, and soil wetness, Soil-w. The variables have been scaled to have similar dynamic ranges on the plots. The NCEP data from the NCEP Reanalysis Project are monthly averages on a 2.5 deg x 2.5 deg grid averaged over the 4 deg x 10 deg study area. Comparisons of SMMR retrievals with forecast model output show the potential of the satellite data for validating model output and monitoring long-term trends. Continuing work will extend these results to other regions to validate the retrievals more quantitatively. In preparation for the launch of AMSR, field experiments are planned in collaboration with the Global Energy and Water Cycle Experiment (GEWEX) Coordinated Enhanced Observing Period (CEOP) experiments to evaluate the satellite-derived soil moisture measurements and to demonstrate their usefulness for land surface hydrology and climate. Additional information is contained in the original.

Njoku, Eni G.↗

Estimation of soil hydraulic properties with microwave techniques

Useful quantitative information about soil properties may be obtained by calibrating energy and moisture balance models with remotely sensed data. A soil physics model solves heat and moisture flux equations in the soil profile and is driven by the surface energy balance. Model generated surface temperature and soil moisture and temperature profiles are then used in a microwave emission model to predict the soil brightness temperature. The model hydraulic parameters are varied until the predicted temperatures agree with the remotely sensed values. This method is used to estimate values for saturated hydraulic conductivity, saturated matrix potential, and a soil texture parameter. The conductivity agreed well with a value measured with an infiltration ring and the other parameters agreed with values in the literature.

Oneill, P. E.↗

Dual-mode microwave system to enhance early detection of cancer

A dual-mode microwave system has been developed that will permit early detection of cancer. The system combines the use of the passive microwave radiometer with an active transmitter. The active transmitter will provide localized heating to enhance early detection by taking advantage of the differential heating (i.e., tumor temperature with respect to surrounding tissue) associated with the thermal characteristics of tumors.

Carr, K. L.↗

Ionospheric power beam studies

A power density level of 23 mW/sq cm is presented as a design specification based on theoretical calculations of a threshold for microwave ionosphere nonlinear interaction (thermal runaway). For comparable power densities, enhanced electron heating is observed to change the electron temperature by a factor of two or three, but not by an order of magnitude.

Duncan, L. M.↗

Parameterization and scaling of Arctic ice conditions in the context of ice-atmosphere processes

This report summarizes achievements during year three of our project to investigate the use of ERS-1 SAR data to study Arctic ice and ice/atmosphere processes. The project was granted a one year extension, and goals for the final year are outlined. The specific objects of the project are to determine how the development and evolution of open water/thin ice areas within the interior ice pack vary under different atmospheric synoptic regimes; compare how open water/thin ice fractions estimated from large-area divergence measurements differ from fractions determined by summing localized openings in the pack; relate these questions of scale and process to methods of observation, modeling, and averaging over time and space; determine whether SAR data might be used to calibrate ice concentration estimates from medium and low-rate bit sensors (AVHRR and DMSP-OLS) and the special sensor microwave imager (SSM/I); and investigate methods to integrate SAR data for turbulent heat flux parametrization at the atmosphere interface with other satellite data.

Barry, R. G.↗

Gasdynamic Mirror Fusion Propulsion Experiment

A gasdynamic mirror (GDM) fusion propulsion experiment is currently being constructed at the NASA Marshall Space Flight Center (MSFC) to test the feasibility of this particular type of fusion device. Because of the open magnetic field line configuration of mirror fusion devices, they are particularly well suited for propulsion system applications since they allow for the easy ejection of thrust producing plasma. Currently, the MSFC GDM is constructed in three segments. The vacuum chamber mirror segment, the plasma injector mirror segment, and the main plasma chamber segment. Enough magnets are currently available to construct up to three main plasma chamber segments. The mirror segments are also segmented such that they can be expanded to accommodate new end plugging strategies with out requiring the disassembly of the entire mirror segment. The plasma for the experiment is generated in a microwave cavity located between the main magnets and the mirror magnets. Ion heating is accomplished through ambipolar diffusion. The objective of the experiment is to investigate the stability characteristics of the gasdynamic mirror and to map a region of parameter space within which the plasma can be confined in a stable steady state configuration. The mirror ratio, plasma density, and plasma "b" will be varied over a range of values and measurements subsequently taken to determine the degree of plasma stability.

Emrich, Bill↗

Understanding Model-Observation Discrepancies in Satellite Retrievals of Atmospheric Temperature Using GISS ModelE

We examine multiple factors in the representation of satellite-retrieved atmospheric temperature diagnostics in historical simulations of climate change during the satellite era (specifically 1979–2021) using GISS ModelE contributions to the Coupled Model Intercomparison Project (Phase 6) (CMIP6). The tropospheric and stratospheric trends in these diagnostics are affected by greenhouse gases (notably carbon dioxide and ozone), coupling with the ocean, volcanic aerosols, solar activity and compositional and dynamic feedbacks. We explore the impacts of internal variability, changing forcing specifications, composition interactivity, the quality of the stratospheric circulation, vertical resolution, and possible impacts of the mis-specification of volcanic aerosol optical depths. Overall temperature trends throughout the satellite period are well captured, but discrepancies at all levels exist and have multiple distinct causes. We find that stratospheric comparisons (using Stratospheric Sounding Unit (SSU) retrievals and successor instruments) are most affected by variations in the representation of ozone depletion and feedbacks, followed by the volcanic signals. Tropospheric skill (using the Microwave Sounding Unit (MSU) retrievals) is affected by the trends in ocean heat uptake and tropospheric aerosols, but also by the representation of stratospheric processes through the impact of the Brewer-Dobson circulation on the height of the tropical tropopause. We demonstrate that no single factor is the dominant cause of the discrepancies and that almost all observations lie within the broad envelope of structural uncertainty.

satellite retrievals of atmospheric temperature↗

Ice surface temperature retrieval from AVHRR, ATSR, and passive microwave satellite data: Algorithm development and application

One essential parameter used in the estimation of radiative and turbulent heat fluxes from satellite data is surface temperature. Sea and land surface temperature (SST and LST) retrieval algorithms that utilize the thermal infrared portion of the spectrum have been developed, with the degree of success dependent primarily upon the variability of the surface and atmospheric characteristics. However, little effort has been directed to the retrieval of the sea ice surface temperature (IST) in the Arctic and Antarctic pack ice or the ice sheet surface temperature over Antarctica and Greenland. The reason is not one of methodology, but rather our limited knowledge of atmospheric temperature, humidity, and aerosol vertical, spatial and temporal distributions, the microphysical properties of polar clouds, and the spectral characteristics of snow, ice, and water surfaces. Over the open ocean the surface is warm, dark, and relatively homogeneous. This makes SST retrieval, including cloud clearing, a fairly straightforward task. Over the ice, however, the surface within a single satellite pixel is likely to be highly heterogeneous, a mixture of ice of various thicknesses, open water, and snow cover in the case of sea ice. Additionally, the Arctic is cloudy - very cloudy - with typical cloud cover amounts ranging from 60-90 percent. There are few observations of cloud cover amounts over Antarctica. The goal of this research is to increase our knowledge of surface temperature patterns and magnitudes in both polar regions, by examining existing data and improving our ability to use satellite data as a monitoring tool. Four instruments are of interest in this study: the AVHRR, ATSR, SMMR, and SSM/I. Our objectives are as follows. Refine the existing AVHRR retrieval algorithm defined in Key and Haefliger (1992; hereafter KH92) and applied elsewhere. Develop a method for IST retrieval from ATSR data similar to the one used for SST. Further investigate the possibility of estimating surface temperature from passive microwave data (in conjunction with AVHRR clear sky samples) through the use of 'effective emissivities' and physical relationships between skin temperature and subsurface temperature. Use the general method outlined in MK93 to calculate a 12-year record of clear sky equivalent surface temperatures, or possibly all-sky snow-ice interface physical temperatures, from SMMR and SSM/I, compare these temperatures to climatologies, ECMWF modeled surface temperatures, and surface temperatures predicted by a 2-D ice model. And intercompare several ice surface retrieval methods and validate them against ground measurements from the Swiss Camp on the Greenland ice sheet. Additionally, we intend to develop a surface temperature product based on AVHRR data and possibly blended with drifting buoy and meteorological station temperatures.

Key, Jeff↗

Recent Improvements in Retrieving Near-Surface Air Temperature and Humidity Using Microwave Remote Sensing

Detailed studies of the energy and water cycles require accurate estimation of the turbulent fluxes of moisture and heat across the atmosphere-ocean interface at regional to basin scale. Providing estimates of these latent and sensible heat fluxes over the global ocean necessitates the use of satellite or reanalysis-based estimates of near surface variables. Recent studies have shown that errors in the surface (10 meter)estimates of humidity and temperature are currently the largest sources of uncertainty in the production of turbulent fluxes from satellite observations. Therefore, emphasis has been placed on reducing the systematic errors in the retrieval of these parameters from microwave radiometers. This study discusses recent improvements in the retrieval of air temperature and humidity through improvements in the choice of algorithms (linear vs. nonlinear) and the choice of microwave sensors. Particular focus is placed on improvements using a neural network approach with a single sensor (Special Sensor Microwave/Imager) and the use of combined sensors from the NASA AQUA satellite platform. The latter algorithm utilizes the unique sampling available on AQUA from the Advanced Microwave Scanning Radiometer (AMSR-E) and the Advanced Microwave Sounding Unit (AMSU-A). Current estimates of uncertainty in the near-surface humidity and temperature from single and multi-sensor approaches are discussed and used to estimate errors in the turbulent fluxes.

Roberts, J. Brent↗

Rapid Selective Annealing of Cu Thin Films on Si Using Microwaves

A major goal of the semiconductor indurstry is to lower the processing temperatures needed for interconnects in silicon integrated circuits. Typical rapid thermal annealing processes heat the film as well as the substrate, creating device problems.

silicon integrated circuits microwave thin films↗

A Texture-Polarization Method for Estimating Convective/Stratiform Precipitation Area Coverage from Passive Microwave Radiometer Data

Observational and modeling studies have described the relationships between convective/stratiform rain proportion and the vertical distributions of vertical motion, latent heating, and moistening in mesoscale convective systems. Therefore, remote sensing techniques which can quantify the relative areal proportion of convective and stratiform, rainfall can provide useful information regarding the dynamic and thermodynamic processes in these systems. In the present study, two methods for deducing the convective/stratiform areal extent of precipitation from satellite passive microwave radiometer measurements are combined to yield an improved method. If sufficient microwave scattering by ice-phase precipitating hydrometeors is detected, the method relies mainly on the degree of polarization in oblique-view, 85.5 GHz radiances to estimate the area fraction of convective rain within the radiometer footprint. In situations where ice scattering is minimal, the method draws mostly on texture information in radiometer imagery at lower microwave frequencies to estimate the convective area fraction. Based upon observations of ten convective systems over ocean and nine systems over land, instantaneous 0.5 degree resolution estimates of convective area fraction from the Tropical Rainfall Measuring Mission Microwave Imager (TRMM TMI) are compared to nearly coincident estimates from the TRMM Precipitation Radar (TRMM PR). The TMI convective area fraction estimates are slightly low-biased with respect to the PR, with TMI-PR correlations of 0.78 and 0.84 over ocean and land backgrounds, respectively. TMI monthly-average convective area percentages in the tropics and subtropics from February 1998 exhibit the greatest values along the ITCZ and in continental regions of the summer (southern) hemisphere. Although convective area percentages. from the TMI are systematically lower than those from the PR, monthly rain patterns derived from the TMI and PR rain algorithms are very similar. TMI rain depths are significantly higher than corresponding rain depths from the PR in the ITCZ, but are similar in magnitude elsewhere.

Olson, William S.↗

Compact Dual-Mode Microwave Antenna

Compact dual-mode antenna, 3.66 cm wide by 1.83 cm thick is used both for heating and thermographic detection of tumors in cancer research. Temperature sensor operates independently or simultaneously with heater. Antenna includes 1.6-GHz transmitter and 4.76-GHz receiver. Strip heater between antennas controls temperature of device. Maximum power output is 25 W.

Carr, K. L.↗

Impact of August 2017 British Columbia Pyrocumulonimbus Injection Events on Lower Stratospheric Composition

On August 12-13, 2017 large wildfires in the Cariboo region of British Columbia, Canada sparked a series of pyrocumulonimbus events lifting carbonaceous aerosol and other trace gases to the tropopause region (~10-11 km). Over the subsequent days, this plume of trace gas and aerosol species was observed from numerous NASA satellite instruments to rise to over 22 km due to the strong shortwave heating of the carbonaceous aerosol. We will show observations of CO and H2O from the Microwave Limb Sounder (MLS) instrument on Aura satellite demonstrating the clear rise and spread of the plume which can be coherently tracked for at least 2 months. Enhancements in HCN, CH3CN, and methanol (CH3OH) are also evident in MLS measurements with the former two having low vertical resolution. We have also detected a significantly lower concentration of O3 and HNO3 in the plume compared to the surrounding environment, which is consistent with a dynamical perturbation from the rapid diabatic rise of the heated plume from the tropopause through the lower stratosphere. In the weeks and months that followed this plume spread over much of the Northern Hemisphere and the aerosol was observed to be slowly removed by transport back into the troposphere. We will compare and contrast the Aug. 2017 event with the other large event in the MLS record, the Feb. 2009 Australian "Black Saturday" event, and use the Goddard Earth Observing System Chemistry-Climate Model (GEOSCCM) replayed to observed meteorology to understand the effect of the British Columbia event on trace gas species. GEOSCCM helps us to separate the relative roles of dynamics and chemistry on lower stratospheric trace gas composition changes, not only in the rising plume but also the impact of its eventual spread over the Northern Hemisphere during fall and winter of 2017-2018.

Oman, Luke D.↗

Variability of Convective Precipitation from TRMM Microwave Imager (TMI)

Tropical precipitation generally occurs in two distinguishable forms: convective and stratiform. The two different types of precipitation systems have considerably different vertical profiles of latent heat release that has a crucial role in driving the circulation of the atmosphere. Thus, it is very important to study the variability of convective and stratiform precipitation. This paper presents variability of convective precipitation estimated from TRMM Microwave Imager (TMI). The convective/stratiform precipitation areas are classified using a combined texture-based and polarization-based algorithm. Surface rainfall rates are retrieved using the Goddard Profiling algorithm (Gprof). We will examine the spatial and temporal variability of convective precipitation for 1998. In addition, convective precipitation computed from TMI will be compared with those from the space borne Precipitation Radar (PR) and the ground-based radars for several cases.

Hong, Ye↗