Search NASA⌕ Search

SEARCH · Search NASA

Results for “Microwave techniques”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Conversion and matched filter approximations for serial minimum-shift keyed modulation

Serial minimum-shift keyed (MSK) modulation, a technique for generating and detecting MSK using series filtering, is ideally suited for high data rate applications provided the required conversion and matched filters can be closely approximated. Low-pass implementations of these filters as parallel inphase- and quadrature-mixer structures are characterized in this paper in terms of signal-to-noise ratio (SNR) degradation from ideal and envelope deviation. Several hardware implementation techniques utilizing microwave devices or lumped elements are presented. Optimization of parameter values results in realizations whose SNR degradation is less than 0.5 dB at error probabilities of .000001.

Ziemer, R. E.↗

The Jovian ammonia abundance from interferometric observations of limb darkening at 3.4 mm

The relative abundances of the various atomic and molecular constituents in the Jovian atmosphere are important data for studies of the origin of the solar system. The determination of the ammonia abundance presents a number of difficulties. However, difficulties related to a use of the microwave sensing technique can be largely overcome by measuring the brightness distribution across the disk. In particular, information about the atmosphere can be obtained from the degree of limb darkening, which requires only a relative brightness measurement as opposed to an absolute measurement. Valdes and Welch (1978) have used the considered approach in a study of Jupiter at 1.3 cm. In the present investigation a more general relation between the amount of limb darkening in the broad 1.25-cm inversion band of ammonia and the ammonia abundance is derived. The model is applied to new measurements of Jupiter's limb darkening at 3.4 mm.

Valdes, F.↗

Aircraft and satellite measurement of ocean wave directional spectra using scanning-beam microwave radars

A microwave radar technique for remotely measuring the vector wave number spectrum of the ocean surface is described. The technique, which employs short-pulse, noncoherent radars in a conical scan mode near vertical incidence, is shown to be suitable for both aircraft and satellite application, the technique was validated at 10 km aircraft altitude, where we have found excellent agreement between buoy and radar-inferred absolute wave height spectra.

Jackson, F. C.↗

The Delta-K ocean wave spectrometer - Aircraft measurements and theoretical system analysis

Measurements of the relative strength of ocean surface wave spectral components have been made from an aircraft using the two-frequency microwave resonance technique. A coherent Ku-band radar was used to study the Bragg type resonance matching (at the difference frequency Delta-f) to the surface wave components. The spatial spectrum of the surface reflectivity modulation was then computed as the value of Delta-f was varied over a matching range of approximately 15 150 m in surface wavelength. This paper contains experimental results from flights conducted during the 1979 MARSEN project and the 1980 ARSLOE project, and the objective here is to present the radar results in terms of the variety of surface illumination geometries encountered. It will be shown that the MARSEN results, with the narrow footprint, are consistent with a one-dimensional theoretical approach and that the ARSLOE results, with a symmetric beam pattern, agree well with the existing two-dimensional theory.

Weissman, D. E.↗

Two-frequency microwave resonance measurements from an aircraft - A quantitative estimate of the directional ocean surface spectrum

The use of the two-frequency microwave-resonance technique for airborne measurements of ocean surface-wave spectral components is examined in a summary of experiments conducted with a coherent Ku-band radar flown on a P-3 aircraft in the 1979 MARSEN and 1980 ARSLOE projects. The 1D theoretical formulation used in the analysis of the MARSEN data by Johnson et al. (1982) is extended to the 2D case; the experimental conditions are described in detail; and typical data are presented graphically, analyzed, and compared with independent measurements obtained with a surface-contour radar. The 3.5-deg pencil-beam configuration used in ARSLOE is shown to produce spectra with good directional characteristics (strong resonances at angles of incidence 13-48 deg). It is found that the proper inversion of radar data to surface-elevation spectra requires surface-reflectivity-modulation sources in addition to the long-wave orbital velocity.

Johnson, J. W.↗

Surface diagnosis of large reflector antennas using microwave holographic metrology - An iterative approach

The radiation pattern of an antenna can be significantly affected by reflector surface errors. A minimization of losses due to surface inaccuracies is, therefore, required. A suitable procedure for the determination of the deviations of the surface from its ideal geometry is based on the microwave holographic technique. In this procedure, the complex pattern of the antenna is measured, and the Fourier transform relationship, existing between the radiation pattern and the function related to the current distribution on the reflector surface, is applied. It is naturally desirable to limit the amount of measured data. The present investigation is concerned with the concept of the Fourier transform relationship between the induced current and the far field. It is demonstrated that the relationship, in general, can be interpreted as a summation of many Fourier transforms. An iterative scheme is employed to continue the far-field pattern outside the measurement window.

Rahmat-Samii, Y.↗

Aircraft and satellite measurement of ocean wave directional spectra using scanning-beam microwave radars

A microwave radar technique for remotely measuring the vector wave number spectrum of the ocean surface is described. The technique which employs short-pulse, noncoherent radars in a conical scan mode near vertical incidence, is shown to be suitable for both aircraft and satellite application, the technique was validated at 10 km aircraft altitude, where we have found excellent agreement between buoy and radar-inferred absolute wave height spectra.

Jackson, F. C.↗

Microwave holography of large reflector antennas - Simulation algorithms

The performance of large reflector antennas can be improved by identifying the location and amount of their surface distortions and correcting them. To determine the accuracy of the constructed surface profiles, simulation studies are used to incorporate both the effects of systematic and random distortions, particularly the effects of the displaced surface panels. In this paper, different simulation models are investigated, emphasizing a model based on the vector diffraction analysis of a curved reflector with displaced panels. The simulated far-field patterns are then used to reconstruct the location and amount of displacement of the surface panels by employing a fast Fourier transform/iterative procedure. The sensitivity of the microwave holography technique based on the number of far-field sampled points, level of distortions, polarizations, illumination tapers, etc., is also examined.

Rahmat-Samii, Y.↗

Received optical power calculations for optical communications link performance analysis

The factors affecting optical communication link performance differ substantially from those at microwave frequencies, due to the drastically differing technologies, modulation formats, and effects of quantum noise in optical communications. In addition detailed design control table calculations for optical systems are less well developed than corresponding microwave system techniques, reflecting the relatively less mature state of development of optical communications. Described below are detailed calculations of received optical signal and background power in optical communication systems, with emphasis on analytic models for accurately predicting transmitter and receiver system losses.

Marshall, W. K.↗

Radiative transfer to space through a precipitating cloud at multiple microwave frequencies. I - Model description. II - Results and analysis

The impact of time-dependent cloud microphysical structure on the transfer to space of passive microwave radiation is studied at several frequencies across the EHF and lower SHF portions of the microwave spectrum. The feasibility of using multichannel passive-microwave retrieval techniques to estimate precipitation from space-based platforms is examined. The model is described, and the results are assessed in conjunction with a Nimbus-7 SMMR case study of precipitation in an intense tropical Pacific storm. It is concluded that the effects of cloud liquid water content must be considered to obtain a realistic estimation and distribution of rainrates.

Mugnai, Alberto↗

An interim reference model for the variability of the middle atmosphere water vapor distribution

A reference model for the middle atmosphere water vapor distribution for some latitudes and seasons was developed using two data sets. One is the seven months of Nimbus LIMS data obtained during November 1978 to May 1979 over the range 64 deg S - 84 deg N latitude and from about 100-mb to 1-mb altitude, and the other is represented by water vapor profiles from 0.2 mb to 0.01 mb in the mid-mesosphere, measured on ground at several fixed mid-latitude sites in the Northern Hemisphere, using microwave-emission techniques. This model provides an interim water vapor profile for the entire vertical range of the middle atmosphere, with accuracies of better than 25 percent. The daily variability of stratospheric water vapor profiles about the monthly mean is demonstrated, and information is provided on the longitudinal variability of LIMS water vapor profiles about the daily, weekly, and monthly zonal means.

Remsberg, E. E.↗

Complex permittivity of lanthanum aluminate in the 20 to 300 K temperature range from 26.5 to 40.0 GHz

Dielectric constants of microwave substrates are required in the design of superconducting microwave circuits at various temperatures. In this paper, the results are reported of a study of the complex permittivity of the newly developed lanthanum aluminate (LaAlO3) substrate, in the 20 to 300 K temperature range at frequencies from 26.5 to 40.0 GHz. The value of the complex permittivity was obtained by measuring the sample scattering parameters using a microwave waveguide technique. It is observed that, while the dielectric constant did not change appreciably with frequency, its value decreased by approximately 14 percent from room temperature to 20 K.

Miranda, F. A.↗

Effects of measurement errors on microwave antenna holography

The effects of measurement errors appearing during the implementation of the microwave holographic technique are investigated in detail, and many representative results are presented based on computer simulations. The numerical results are tailored for cases applicable to the utilization of the holographic technique for the NASA's Deep Space Network antennas, although the methodology of analysis is applicable to any antenna. Many system measurement topics are presented and summarized.

Rochblatt, David J.↗

A microwave holography methodology for diagnostics and performance improvement for large reflector antennas

This microwave holography technique utilizes the Fourier transform relation between the complex far field radiation pattern of an antenna and the complex aperture field distribution. Resulting aperture phase and amplitude distribution data can be used to precisely characterize various crucial performance parameters, including panel alignment, panel shaping, subreflector position, antenna aperture illumination, directivity at various frequencies, and gravity deformation effects. The methodology of data processing presented here was successfully applied to the Deep Space Network (DSN) 34-m beam waveguide antennas. The antenna performance was improved at all operating frequencies by reducing the main reflector mechanical surface rms error to 0.43 mm. At Ka-band (32 GHz), the estimated improvement is 4.1 dB, resulting in an aperture efficiency of 52 percent. The performance improvement was verified by efficiency measurements and additional holographic measurements.

Rochblatt, D. J.↗

Performance improvement of DSS-13 34-meter beam-waveguide antenna using the JPL microwave holography methodology

Described here is the application of the microwave holography technique to Deep Space Station (DSS) 13. The project goal of obtaining a rigging angle surface rms error of 0.43 mm or better was met. The Jet Propulsion Laboratory-developed holography algorithms enabled a reduction of the surface error of the DSS-13 antenna from the optically set 0.83 mm axial rms error down to 0.40 mm rms, providing an additional 4.1 dB of performance at 32 GHz.

Rochblatt, D. J.↗

A technique for measuring vertically and horizontally polarized microwave brightness temperatures using electronic polarization-basis rotation

This technique for electronically rotating the polarization basis of an orthogonal-linear polarization radiometer is based on the measurement of the first three feedhorn Stokes parameters, along with the subsequent transformation of this measured Stokes vector into a rotated coordinate frame. The technique requires an accurate measurement of the cross-correlation between the two orthogonal feedhorn modes, for which an innovative polarized calibration load was developed. The experimental portion of this investigation consisted of a proof of concept demonstration of the technique of electronic polarization basis rotation (EPBR) using a ground based 90-GHz dual orthogonal-linear polarization radiometer. Practical calibration algorithms for ground-, aircraft-, and space-based instruments were identified and tested. The theoretical effort consisted of radiative transfer modeling using the planar-stratified numerical model described in Gasiewski and Staelin (1990).

Gasiewski, Albin J.↗

Microwave antenna holography

This microwave holography technique utilizes the Fourier transform relation between the complex far field radiation pattern of an antenna and the complex aperture field distribution. Resulting aperture phase and amplitude distribution data can be used to precisely characterize various crucial performance parameters, including panel alignment, panel shaping, subreflector position, antenna aperture illumination, directivity at various frequencies, and gravity deformation effects. The methodology of data processing presented here was successfully applied to the Deep Space Network (DSN) 34-m beam waveguide antennas. The antenna performance was improved at all operating frequencies by reducing the main reflector mechanical surface rms error to 0.43 mm. At Ka-band (32 GHz), the estimated improvement is 4.1 dB, resulting in an aperture efficiency of 52 percent. The performance improvement was verified by efficiency measurements and additional holographic measurements.

Rochblatt, David J.↗

Passive microwave remote sensing of precipitation from space - Impact of cloud microphysics

Numerical experiments to investigate the impact of time-dependent cloud microphysical structure on the transfer to space of passive microwave radiation are carried out, using a vertically and angularly detailed, plane-parallel radiative transfer model for unpolarized microwave radiation. The object is to explore the feasibility of multichannel passive-microwave retrieval techniques to estimate precipitation from space. Results on the time-dependent influence of large graupel-size ice particles on top-of-atmosphere brightness temperature - rainfall rate relationships at 6.6, 10.7, 18, 19.35, 22.235, 37, 89.5, 130, and 231 GHz are given. Frequency-dependent vertical profiles of a generalized brightness-temperature weighting function, introduced to vertically resolve the contributions by individual cloud and precipitation layers to the brightness temperatures, are also shown.

Mugnai, Alberto↗