Search NASA⌕ Search

SEARCH · Search NASA

Results for “NUMERICAL INTEGRATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Nonlinearities in analyses of unsteady flow around oscillating wings

An analysis of nonlinearities involved in unsteady subsonic viscous flow around wings at high Reynolds numbers is presented. The finite element method was applied for the numerical integration of the vorticity transport equations. Physical and numerical aspects of the nonlinearities are discussed. Magnification of nonlinearities in the convection terms near wing surfaces due to changing geometry at leading and trailing edges of the wing chord is determined. As a bubble is generated near the leading edge, the timewise variation of vorticity and pressure distributions over the surface is shown. The different procedures for the integration of the vorticity transport equations in three dimensions along spanwise, chordwise, and normal directions are discussed.

Bratanow, T.↗
DOE OSTI2025

A three-dimensional laser ray-tracing methodology for radiation-hydrodynamics simulations

We report on a methodology for performing laser ray-tracing in three spatial dimensions for radiation-hydrodynamics simulation codes. Our method, which is an extension of that developed in Haines et al., Comput. Fluids 201, 104478 (2020), utilizes an automatically generated separate mesh for the laser ray-tracing from the radiation-hydrodynamics mesh. This enables the laser mesh to be tailored to minimize ray noise with significantly fewer rays than would be required when the ray-tracing is performed on the radiation-hydrodynamics mesh, primarily by allowing the use of high-aspect-ratio cells that are not suitable for hydrodynamics solvers. For a planar target, we show that our method provides a ≈ 100× reduction in computational expense to achieve a fixed level of ray noise relative to ray-tracing directly on the radiation-hydrodynamics mesh. The relatively low ray requirement also enables efficient computation of cross-beam energy transfer. Each cell in the logically cubic laser mesh is a non-convex dodecahedron with triangular sides, and numerical integration of the ray trajectories and inverse bremsstrahlung is performed by mapping each cell to the unit cube. We will describe our methodology in detail as well as its implementation in the xRAGE radiation-hydrodynamics code, discuss performance, and present the results from applying the methodology to test problems with analytic solutions for laser ray-tracing through a quadratic density gradient with an analytic solution as well as for a laser-driven heat front. In 3D radiation-hydrodynamics simulations of laser-driven experiments performed on the National Ignition Facility, laser ray-tracing with our methodology uses less than 1% of total computational time while introducing acceptably low levels of ray noise.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1975

A three-dimensional viscoelastic model of a strike slip fault

An analytic approximation to the Green's function for the displacements due to a strike slip point source in an elastic layer over a viscoelastic half-space is developed. This approximate Green's function is useful because it can be analytically integrated over the fault surface. Comparison with a numerical integration of the exact solution integral indicates that the approximation is quite good. The approximate Green's function is integrated analytically to obtain the displacements due to a finite rectangular strike slip fault in an elastic layer over a viscoelastic half-space. Ground displacements and angle changes from a model survey net are computed to illustrate the viscoelastic relaxation which follows a fracture in the elastic region.

Rundle, J. B.↗
NASA NTRS1977

Unsteady supersonic aerodynamic theory by the method of potential gradient

A generalized solution of the hyperbolic wave equation has been derived. The method used has been further developed to relate the velocity components at a field point to the potential gradient distribution in the dependence domain. Singular integrals have been evaluated in closed form, while numerical integration methods are suggested for treating more complex but analytic functions. Idealization of the lifting surfaces by trapezoidal elements with two sides parallel to the streamlines is computationally efficient because line integrations along the other two sides need only be considered. Furthermore, all the integrands vanish on the Mach cone and the need for determining the hyperbolic curves of intersection of the cone with the lifting surface is avoided. Generalized aerodynamic coefficients for three AGARD planforms have been calculated and compared with the available results.

Jones, W. P.↗
NASA NTRS1972

The influence of laser ranging on selenodetic control.

In this paper, a mathematical model is presented which can be used to perform an adjustment using laser distances to improve coordinates of points of the earth and on the moon. The observation equations are given and the orientation of the earth and the moon is defined in terms of three Eulerian angles. Parameters related to the orientation of the two bodies are the six initial conditions in each case, for the numerical integration of the three angles and their time derivatives. Numerical experiments were performed for the purpose of investigating the expected accuracies of the various parameters in the adjustment model under differing conditions. The results of the experiments indicate that the statistics for both the coordinates of points on earth and on the moon, and for the orientation parameters of the two bodies, are favorable.

Mueller, I. I.↗
NASA NTRS1973

Prior-to-failure extension of flaws under monotonic and pulsating loadings.

An equation governing the prior-to-failure crack propagation is proposed. For a rate-sensitive solid containing a two-dimensional crack and subject to the tensile mode of fracture the differential equations are integrated numerically for loads increasing monotonically in time. The resulting integral curves of load vs crack length and length vs time indicate that the growth of cracks in the subcritical range is strongly rate-dependent. The fatigue growth, viewed as a sequence of slow growth periods, is simulated on an EAI 380 analog computer. The fourth-power law proposed by Paris is confirmed only within certain range of high-cycle fatigue propagation and for a rate-insensitive solid. Otherwise, i.e., for a more pronounced rate dependence induced by viscosity of a solid and/or in the proximity of the final instability point, the growth is markedly enhanced.

Wnuk, M. P.↗
NASA NTRS1981

Sound diffraction around screens and wedges for arbitrary point source locations

A development is presented for the Green's function for a point source in the vicinity of a rigid wedge. The diffraction contributions to the Green's function for arbitrary source and listener location is expressed in a form which can be readily evaluated using the Laguerre technique for numerical integration. The present approach offers the advantages of efficient numerical evaluation and of relatively straightforward reduction to well-known analytical approximations in limiting cases. Comparisons with previously obtained experimental and numerical results obtained by Ambaud and Bergassoli (1972) are presented. The comparison with the experimental results is excellent; the advantages of the present numerical technique, vis a vis that of Ambaud and Bergassoli, are pointed out.

Hadden, W. J., Jr.↗
NASA NTRS1990

Downdating a time-varying square root information filter

A new method to efficiently downdate an estimate and covariance generated by a discrete time Square Root Information Filter (SRIF) is presented. The method combines the QR factor downdating algorithm of Gill and the decentralized SRIF algorithm of Bierman. Efficient removal of either measurements or a priori information is possible without loss of numerical integrity. Moreover, the method includes features for detecting potential numerical degradation. Performance on a 300 parameter system with 5800 data points shows that the method can be used in real time and hence is a promising tool for interactive data analysis. Additionally, updating a time-varying SRIF filter with either additional measurements or a priori information proceeds analogously.

Muellerschoen, Ronald J.↗
NASA NTRS1991

Solution of the Navier-Stokes equations for a driven cavity

The flow field in a lid driven cavity is determined by integration of the incompressible Navier-Stokes equations. The numerical integration is accomplished via an operator splitting method known as the theta-scheme. This splitting separates the problem into the solution of a quasi-stokes problem and a nonlinear convection problem. Some details of solution methods used for the two subproblems and results obtained for the driven cavity are described. The schemes developed for the quasi-Stokes problem are more advanced at this stage than those for the nonlinear problem. However, the approaches used for both parts are outlined. As a model problem, a two dimensional square cavity with sides of unit length and a lid moving with unit velocity from left to right is considered. The Navier-Stokes equations are discretized in space on a uniform staggered or MAC mesh. The time discretization is accomplished via the theta-scheme.

Semeraro, B. D.↗
NASA NTRS2002

Designing Adaptive Low Dissipative High Order Schemes

Proper control of the numerical dissipation/filter to accurately resolve all relevant multiscales of complex flow problems while still maintaining nonlinear stability and efficiency for long-time numerical integrations poses a great challenge to the design of numerical methods. The required type and amount of numerical dissipation/filter are not only physical problem dependent, but also vary from one flow region to another. This is particularly true for unsteady high-speed shock/shear/boundary-layer/turbulence/acoustics interactions and/or combustion problems since the dynamics of the nonlinear effect of these flows are not well-understood. Even with extensive grid refinement, it is of paramount importance to have proper control on the type and amount of numerical dissipation/filter in regions where it is needed.

Yee, H. C.↗
NASA NTRS1982

A numerical method for the dynamics of non-spherical cavitation bubbles

A boundary integral numerical method for the dynamics of nonspherical cavitation bubbles in inviscid incompressible liquids is described. Only surface values of the velocity potential and its first derivatives are involved. The problem of solving the Laplace equation in the entire domain occupied by the liquid is thus avoided. The collapse of a bubble in the vicinity of a solid wall and the collapse of three bubbles with collinear centers are considered.

Lucca, G.↗
NASA NTRS1977

On the improvement of deconvolution with digitized data using a Runge-Kutta integration scheme

A relatively simple change in the treatment of the input function in numerical integration of high-order differential equations by Runge-Kutta methods provides substantial improvements in accuracy, particularly when the forcing function is in digitized form. The Runge-Kutta-Gill coefficients are modified to incorporate the changes; with pulse-type excitations, improvements on the order of 2 to 50 times greater accuracy are demonstrated.

Houghton, J. R.↗
NASA NTRS1971

Prior-to-failure extension of flaws under monotonic and pulsating loadings: Inelastic fatigue

An equation governing the prior to failure crack propagation is proposed. For a rate-sensitive solid containing two-dimensional crack and subject to the tensile mode of fracture, the differential equations are integrated numerically for the loads increasing monotonically in time. The resulting integral curves sigma = sigma(l) and l = l(t), i.e. load vs. crack length and length vs. time, indicate that the growth of cracks in the subcritical range is strongly rate dependent. The fatigue growth, viewed as a sequence of slow growth periods, is simulated on an EAI 380 analogue computer. The fourth power law proposed by Paris is confirmed only within a certain range of high-cycle fatigue propagation and for a rate-insensitive solid. For a more pronounced rate dependency, induced by the viscosity of a solid and/or in the proximity of the final instability point, the growth is markedly enhanced.

Wnuk, M. P.↗
NASA NTRS1991

IMP: A performance code

IMP (Integrated Mission Program) is a simulation language and code used to model present and future Earth, Moon, or Mars missions. The profile is user controlled through selection from a large menu of events and maneuvers. A Fehlberg 7/13 Runge-Kutta integrator with error and step size control is used to numerically integrate the differential equations of motion (DEQ) of three spacecraft, a main, a target, and an observer. Through selection, the DEQ's include guided thrust, oblate gravity, atmosphere drag, solar pressure, and Moon gravity effects. Guide parameters for thrust events and performance parameters of velocity changes (Delta-V) and propellant usage (maximum of five systems) are developed as needed. Print, plot, summary, and debug files are output.

Dauro, Vincent A., Sr.↗