SEARCH · Search NASA

Results for “Ordinary Differential Equation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

All sources NASA NTRS DOE OSTI

NASA NTRS1974

Finite element solution theory for three-dimensional boundary flows

A finite element algorithm is derived for the numerical solution of a three-dimensional flow field described by a system of initial-valued, elliptic boundary value partial differential equations. The familiar three-dimensional boundary layer equations belong to this description when diffusional processes in only one coordinate direction are important. The finite element algorithm transforms the original description into large order systems of ordinary differential equations written for the dependent variables discretized at node points of an arbitrarily irregular computational lattice. The generalized elliptic boundary conditions is piecewise valid for each dependent variable on boundaries that need not explicitly coincide with coordinate surfaces. Solutions for sample problems in laminar and turbulent boundary flows illustrate favorable solution accuracy, convergence, and versatility.

Baker, A. J.↗

NASA NTRS1981

On numerical nonlinear analysis of highly flexible spinning cantilevers

The general nonlinear discretized equations of motion of spinning elastic solids and structures are derived as a set of nonlinear ordinary differential equations for the case when the strain-displacement and velocity-displacement relations are nonlinear up to the second order. It is shown that the cost of generation of such equations is proportional to the fourth power of the number of degrees of freedom. A computer program is written to automatically generate the equations for the case of spinning cantilevers with initial imperfections. The types and the number of the coordinate functions used in the trial solution are parameters of the program.

Utku, S.↗

NASA NTRS1981

Chaotic /strange/ and periodic behavior in instability saturation by the oscillating two-stream instability

The nonlinear Schroedinger equation with linear growth and damping is truncated to three waves. The resulting system of nonlinear ordinary differential equations describes the excitation of linearly damped waves by the oscillating two-stream instability driven by a linearly unstable pump wave. This system represents a simple model for the nonlinear saturation of a linearly unstable wave. The model is examined analytically and numerically as a function of the dimensionless parameters of the system. It is found that the model can exhibit a wealth of characteristic dynamical behavior including stationary equilibria, Hopf bifurcations to periodic orbits, period doubling bifurcations, chaotic solutions characteristic of a strange attractor, tangent bifurcations from chaotic to periodic solutions, transient chaos, and hysteresis. Many of these features are shown to be explainable on the basis of one-dimensional maps. In the case of chaotic solutions, evidence for the presence of a strange attractor is provided by demonstrating Cantor set-like structure (i.e., scale invariance) in the surface of section.

Russell, D. A.↗

NASA NTRS1988

Estimation of time- and state-dependent delays and other parameters in functional differential equations

A parameter estimation algorithm is developed which can be used to estimate unknown time- or state-dependent delays and other parameters (e.g., initial condition) appearing within a nonlinear nonautonomous functional differential equation. The original infinite dimensional differential equation is approximated using linear splines, which are allowed to move with the variable delay. The variable delays are approximated using linear splines as well. The approximation scheme produces a system of ordinary differential equations with nice computational properties. The unknown parameters are estimated within the approximating systems by minimizing a least-squares fit-to-data criterion. Convergence theorems are proved for time-dependent delays and state-dependent delays within two classes, which say essentially that fitting the data by using approximations will, in the limit, provide a fit to the data using the original system. Numerical test examples are presented which illustrate the method for all types of delay.

Murphy, K. A.↗

NASA NTRS1990

Estimation of time- and state-dependent delays and other parameters in functional differential equations

Murphy, K. A.↗

NASA NTRS1979

An implicit factored scheme for the compressible Navier-Stokes equations. II - The numerical ODE connection

An attempt is made to establish a connection between linear multistep methods for applications to ordinary differential equations and their extension (by approximate factorization) to alternating direction implicit methods for partial differential equations. An earlier implicit factored scheme for the compressible Navier-Stokes equations is generalized by innovations that (1) increase the class of temporal difference schemes to include all linear multistep methods, (2) optimize the class of unconditionally stable factored schemes by a new choice of unknown variable, and (3) improve the computational efficiency by the introduction of quasi-one-leg methods.

Beam, R. M.↗

NASA NTRS1972

Dynamic Nonlinear Elastic Stability of Helicopter Rotor Blades in Hover and in Forward Flight

Equations for large coupled flap-lag motion of hingeless elastic helicopter blades are consistently derived. Only torsionally-rigid blades excited by quasi-steady aerodynamic loads are considered. The nonlinear equations of motion in the time and space variables are reduced to a system of coupled nonlinear ordinary differential equations with periodic coefficients, using Galerkin's method for the space variables. The nonlinearities present in the equations are those arising from the inclusion of moderately large deflections in the inertia and aerodynamic loading terms. The resulting system of nonlinear equations has been solved, using an asymptotic expansion procedure in multiple time scales. The stability boundaries, amplitudes of nonlinear response, and conditions for existence of limit cycles are obtained analytically. Thus, the different roles played by the forcing function, parametric excitation, and nonlinear coupling in affecting the solution can be easily identified, and the basic physical mechanism of coupled flap-lag response becomes clear. The effect of forward flight is obtained with the requirement of trimmed flight at fixed values of the thrust coefficient.

Friedmann, P.↗

NASA NTRS1983

Nonlinear equations of dynamics for spinning paraboloidal antennas

The nonlinear strain-displacement and velocity-displacement relations of spinning imperfect rotational paraboloidal thin shell antennas are derived for nonaxisymmetrical deformations. Using these relations with the admissible trial functions in the principle functional of dynamics, the nonlinear equations of stress inducing motion are expressed in the form of a set of quasi-linear ordinary differential equations of the undetermined functions by means of the Rayleigh-Ritz procedure. These equations include all nonlinear terms up to and including the third degree. Explicit expressions are given for the coefficient matrices appearing in these equations. Both translational and rotational off-sets of the axis of revolution (and also the apex point of the paraboloid) with respect to the spin axis are considered. Although the material of the antenna is assumed linearly elastic, it can be anisotropic.

Utku, S.↗

NASA NTRS1986

The construction and use of divergence free vector expansions for incompressible fluid flow calculations

For incompressible fluids the law of mass conservation reduces to a constraint on the velocity vector, namely that it be divergence free. This constraint has long been a source of great difficulty to the numericist seeking to discretize the Navier-Stokes and Euler equations. A spectral method is discussed which overcomes this difficulty. Its efficacy is demonstrated on some simple problems. The velocity is approximated by a finite sum of divergence free vectors, each of which satisfies the same boundary conditions as the velocity. Projecting the governing equation onto the space of inviscid vector fields eliminates the pressure term and produces a set of ordinary differential equations that must be solved for the coefficents in the velocity. The pressure can then be recovered if it is needed.

Mhuiris, N. M. G.↗

NASA NTRS1973

Numerical integration of shell equations using the field method.

The 'field method' for the numerical solution of even-order linear boundary-value problems in ordinary differential equations is formulated. This method converts the boundary-value problem into two successive initial-value problems, which may be solved by standard forward integration techniques. The method has been implemented in a computer program to calculate the static response of ring-stiffened branched shells of revolution to asymmetric loads. For such problems the field method eliminates the well-known numerical problem of 'long subintervals' and also executes operations significantly faster than other numerical integration methods.

Cohen, G. A.↗

NASA NTRS1972

Generation and application of the equations of condition for high order Runge-Kutta methods

This thesis develops the equations of condition necessary for determining the coefficients for Runge-Kutta methods used in the solution of ordinary differential equations. The equations of condition are developed for Runge-Kutta methods of order four through order nine. Once developed, these equations are used in a comparison of the local truncation errors for several sets of Runge-Kutta coefficients for methods of order three up through methods of order eight.

Haley, D. C.↗

NASA NTRS1986

An approximate buckling analysis for rectangular orthotropic plates with centrally located cutouts

An approximate analysis for predicting buckling of rectangular orthotropic composite plates with centrally located cutouts is presented. In this analysis, prebuckling and buckling problems are converted from a two-dimensional to a one-dimensional system of linear differential equations with variable coefficients. The conversion is accomplished by expressing the displacements as series with each element containing a trigonometric function of one coordinate and a coefficient that is an arbitrary function of the other coordinate. Ordinary differential equations are then obtained from a variational principle. Analytical results obtained from the approximate analysis are compared with finite element analyses for isotropic plates and for specially orthotropic plates with central circular cutouts of various sizes. Experimental results for the specially orthotropic plates are also presented. In nearly all cases, the approximate analysis predicts the buckling mode shapes correctly and predicts the buckling loads to within a few percent of the finite element and experimental results.

Nemeth, M. P.↗

NASA NTRS1990

A comparison of different models for beam vibrations from the standpoint of control design

Different models for beam vibrations are analyzed from the standpoint of designing finite-dimensional controllers to stabilize the beam vibrations. A distributed system described by an undamped Euler-Bernoulli equation cannot be stabilized by any finite-dimensional controller, i.e., any controller which can be described an ordinary differential equation with constant coefficients. If viscous damping is included, a similar problem occurs in that all the poles can not be moved to the left of a given vertical line. These negative results should be interpreted as a commentary on the limitations of these models, rather than on the control of real beams. If a Rayleigh damping model is used, a finite-dimensional controller may be designed to move the closed loop system poles essentially as far to the left in the complex plane as desired. This result will also hold for certain hysteresis damping models. This has implications for the settling time of the vibrations.

Morris, K. A.↗

NASA NTRS1989

DYSCO: A software system for modeling general dynamic systems

The DYSCO program has been under development since 1979. It has been funded by Army and Air Force laboratories and by the Kaman Aerospace Corporation. It is presently available at a number of government and nongovernment installations. It has been used to analyze a very broad range of dynamics problems. A principle feature of the software design of DYSCO is the separation of the executive from the technology. The executive, which controls all the operations, is intelligent in the sense that it knows that its function is to assemble differential equations and to prepare them for solution. The technology library contains FORTRAN routines which perform standard functions, such as, computing the equation coefficients of an element (or component) given the local state at any time. The technology library also contains algorithms and procedures for solving the coupled system equations. The system was designed to allow easy additional of technology to the library. Any linear or nonlinear structural entity, control system, or set of ordinary differential equations may be simply coded and added to the library, as well as algorithms for time or frequency domain solution. The program is described with emphasis on its usefulness in easily modeling unusual concepts and configurations, performing analysis of damage, evaluating new algorithms, and simulating dynamic tests.

Berman, Alex↗

NASA NTRS1974

Analysis of laminar flow between stationary and rotating disks with inflow

The laminar flow between a rotating and a stationary disk with inflow was analyzed. Solutions to the dimensionless governing equations are sought by expanding each of the velocity components in powers of inverse radius. The equations to leading order are those for the configuration with no inflow. The subsequent orders yield sets of linear ordinary differential equations. Solutions are obtained for the first two of these subsequent orders. The solutions indicate that inflow tends to increase the magnitude of the azimuthal velocity in the flow between the two disks and to decrease the torque on the rotating disk. For Prandtl number one, an energy integral is obtained which relates the temperature distribution to the velocity distribution for all Reynolds numbers and therefore eliminates the needs for separate solution of the energy equation.

Rohatgi, U.↗

NASA NTRS1981

Stable boundary approximations for a class of implicit schemes for the one-dimensional inviscid equations of gas dynamics

The applicability to practical calculations of recent theoretical developments in the stability analysis of difference approximations for initial-boundary-value problems of the hyperbolic type. For the numerical experiments, select the one-dimensional inviscid gas-dynamic equations in conservation-law form is selected. A class of implicit schemes based on linear multistep methods for ordinary differential equations is chosen and the use of space or space-time extrapolations as implicit or explicit boundary schemes is emphasized. Some numerical examples with various inflow-outflow conditions highlight the commonly discussed issues: explicit versus implicit boundary schemes, unconditionally stable schemes, and underspecification or overspecification of boundary conditions.

Yee, H. C.↗

NASA NTRS1971

Asymptotic stability properties of linear Volterra integrodifferential equations.

The Liapunov stability properties of solution to a certain system of Volterra integrodifferential equations is studied. Various types of Liapunov stability are defined; the definitions are natural extensions of the corresponding notions for ordinary differential equations. Necessary and sufficient conditions, in general, for uniform stability and uniform asymptotic stability are obtained in the form of a theorem. Connections between the stability of the system studied and the stability properties of a related Volterra integrodifferential equation with infinite memory are examined. Sufficient conditions in order that the trivial solution to the system studied be stable, uniformly stable, asymptotically stable, or uniformly asymptotically stable are derived.

Miller, R. K.↗

NASA NTRS1978

Aeromechanical stability of helicopters with a bearingless main rotor. Part 1: Equations of motion

Equations of motion for a coupled rotor-body system were derived for the purpose of studying air and ground resonance characteristics of helicopters that have bearingless main rotors. For the fuselage, only four rigid body degrees of freedom are considered; longitudinal and lateral translations, pitch, and roll. The rotor is assumed to consist of three or more rigid blades. Each blade is joined to the hub by means of a flexible beam segment (flexbeam or strap). Pitch change is accomplished by twisting the flexbeam with the pitch-control system, the characteristics of which are variable. Thus, the analysis is capable of implicitly treating aeroelastic couplings generated by the flexbeam elastic deflections, the pitch-control system, and the angular offsets of the blade and flexbeam. The linearized equations are written in the nonrotating system retaining only the cyclic rotor modes; thus, they comprise a system of homogeneous ordinary differential equations with constant coefficients. All contributions to the linearized perturbation equations from inertia, gravity, quasi-steady aerodynamics, and the flexbeam equilibrium deflections are retained exactly.

Hodges, D. H.↗