SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
System locates high- and low-output regions in cadmium sulfide thin film photovoltaic cells. High resolution photograph shows conversion efficiency of each scanned area. X-Y recorder fed by amplified signal from solar cell also produces power contour map. Photo and map reveal high- and low-conversion-efficiency regions.
Aerial photographs taken with color infrared film were used to differentiate various types of residential areas in the Los Angeles basin, using characteristics of the physical environment which vary from one type of residential area to another. Residential areas of varying quality were classified based on these characteristics. Features of the physical environment, identifiable on CIR aerial photography were examined to determine which of these are the best indicators of quality of residential areas or social areas, as determined by the socioeconomic characteristics of the inhabitants of the selected areas. Association between several physical features and the socioeconomic variables was found to exist.
On the basis of the simultaneous observations of auroras from the South Pole and of precipitating electrons by the Isis 1 satellite it is shown that (1) a midday auroral arc (photographed on black and white film) occurs within the cleft (cusp) region projected to the appropriate auroral height along the geomagnetic field; (2) in the evening sector an aurora, observed by Isis 1 and the South Pole all-sky camera, extended for at least 5 hours of local geomagnetic time in the expected position of the auroral oval; and (3) during a period of extreme magnetic quiet, cleftlike electrons were observed just poleward of a narrow region of intense precipitation in the midnight sector. An earth-sun oriented arc was seen at the projected location of the intense electron flux.
The author has identified the following significant results. Multidiscipline team interpretation and mapping of resources for Crook County is nearly complete on 1:250,000 scale enlargements of ERTS-1 imagery. Maps of geology, landforms, soils and vegetation-land use are being interpreted to show limitations, suitabilities and geologic hazards for land use planning. Mapping of lineaments and structures from ERTS-1 imagery has shown a number of features not previously mapped in Oregon. A timber inventory of Ochoco National Forest has been made. Inventory of forest clear-cutting practices has been successfully demonstrated with ERTS-1 color composites. Soil tonal differences in fallow fields shown on ERTS-1 correspond with major soil boundaries in loess-mantled terrain. A digital classification system used for discriminating natural vegetation and geologic materials classes has been successful in separation of most major classes around Newberry Cauldera, Mt. Washington and Big Summit Prairie. Computer routines are available for correction of scanner data variations; and for matching scales and coordinates between digital and photographic imagery. Methods of Diazo film color printing of computer classifications and elevation-slope perspective plots with computer are being developed.
Basic equations of momentum and energy are presented and discussed with respect to heat transfer and pressure drop for forced flow condensation in horizontal tubes under 1-g and 0-g conditions. Some experimental results are presented for condensing refrigerant-12 in a system of three parallel-connected quartz tubes (3-mm inside diameter, G = 1.037 to 3.456 x 105 lbm/hr-sq. ft). From high speed photographs, measurements were obtained of film thickness, phase velocities, disturbance wavelengths, and flow regimes and their transitions. Based upon these measurements various dimensionless force ratios (flow and instability parameters) were calculated. Under 0-g conditions a uniformly thick redistribution of liquid condensate about the tube walls was found to result in a lowered heat transfer coefficient as compared with 1-g conditions, based upon fundamental heat transfer theory. A model is proposed that takes into account the difference in heat transfer due to condensate distribution under 1-g and 0-g conditions.
From 1974 to 1977 the application of remote sensing methods in coastal areas and tidal bays and estuaries was investigated on the German coast of the North Sea. Aerial photographs were taken using different films; (1) color, (2) color infrared, and (3) black and white films. Scanner recordings were taken by an 11 channel scanner. Ground truth measurements of radiation and measurements of meteorological elements were carried out. For mapping the morphology in mudflat areas a digital texture analysis was developed, by which measurement of the change of image structures cased by distributing factors, such as changing illumination, is possible.
The correlation between peak relative light intensity L(R) and stroke peak current I(R) is examined for 39 subsequent return strokes in two triggered lightning flashes. One flash contained 19 strokes and the other 20 strokes for which direct measurements were available of the return stroke peak current at ground. Peak currents ranged from 1.6 to 21 kA. The measurements of peak relative light intensity were obtained from photographic streak recordings using calibrated film and microsecond resolution. Correlations, significant at better than the 0.1 percent level, were found for several functional relationships. Although a relation between L(R) and I(R) is evident in these data, none of the analytical relations considered is clearly favored. The correlation between L(R) and the maximum rate of current rise is also examined, but less correlation than between L(R) and I(R) is found. In addition, the peak relative intensity near ground is evaluated for 22 dart leaders, and a mean ratio of peak dart leader to peak return stroke relative light intensity was found to be 0.1 with a range of 0.02-0.23. Using two different methods, the peak current near ground in these dart leaders is estimated to range from 0.1 to 6 kA.
Attention is given to recent advances in the technologies needed to build and transport a Solar Power satellite. Among the areas of NASA sponsored SPS research are: the application of ground-based, electronically steerable arrays to the SPS space-based microwave transmitting antenna; and the application of microwave transmission technology to a low-cost LEO-to-GEO transportation system to build the SPS. A photograph of a thin-film etched circuit rectenna for powering the LEO-to-GEO transportation system is provided.
A new instrument is described which is capable of simultaneously recording the position of the three controls of an airplane. The records are taken photographically on a standard N.A.C.A. film drum and the instrument can be quickly installed in any airplane.
A system for the analysis and measurement of thin films in which the light output of a laser is split into two beams is discribed. The first beam is focused to illuminate the entire area of a photographic plate and the second beam is colummated and directed through a relatively small portion of the photographic plate onto the sample with the film to be observed. The surface of the sample is positioned at a slight angle with respect to a plane normal to the second beam and the light reflected from the sample arrives back at the photographic plate in a region other than through which the second beam originally passes. By making two successive exposures during the deposition of material on the surface of the sample, holograms are recorded on the photographic plate. The plate is then developed and interference lines of the hologram provide a measurement of the film or material deposited between exposure.
The task of establishing a film calibration scheme for magnitude studies of Skylab photographic images of Comet Kohoutek is examined. Since the data are recorded in terms of film density and have to be used in terms of exposure, the conversion from density to exposure is critical. In this film calibration scheme, the hardware deals with the data sources, recording medium, and data conversion to a computer compatible program, whereas the software deals with signal to noise enhancement, stepwedge calibration curve and leads to modeling of the film characteristic curves. A mathematical model of the characteristic curve is obtained using a modified version of Efroymson's (1960) stepwise multiple linear regression algorithm, which gives log exposure as a function of density. The difference in the calibration curves from pre- and postflight exposures is well accounted for in the model as a result of sensitive statistical tests. The characteristic curve modeling program requires about 4K of core and is executed in about 3 min.
A novel photochemical method for liquid-phase deposition of metal films is described. In the liquid phase deposition scheme, a metal containing compound and a metal-metal bonded carbonyl complex are dissolved together in a polar solvent and the mixture is irradiated using a UV laser. The optical arrangement consists of a HeCd laser which provides 7 mW of power at a wavelength of 325 nm in the TEM(OO) mode. The beam is attenuated and may be expanded to a diameter of 5-20 mm. Experiments with photochemical deposition of silver films onto glass and quartz substrates are described in detail. Mass spectrometric analysis of deposited silver films indicated a deposition rate of about 1 A/s at incident power levels of 0.01 W/sq cm. UV laser-induced copper and palladium films have also been obtained. A black and white photograph showing the silver Van Der Pauw pattern of a solution-deposited film is provided.
With properly exposed color or infrared color film, discolored foliage caused by insect infestations in ponderosa pine is detectable on moderately small-scale photographs with acceptable accuracies. Black and white photographs which matched the wavebands of the ERTS multispectral scanner were combined into one additive color photo. This imagery was not as useful as photographs taken on color, color infrared, or color film with a minus blue filter. Based on the high-altitude color and color infrared photos obtained, it is concluded that only insect infestations larger than 100 meters in diameter are detectable on ERTS imagery.
In 2008, scientists at the Johnson Space Center (JSC) Lunar Sample Laboratory and Image Science & Analysis Laboratory (under the auspices of the Astromaterials Research and Exploration Science Directorate or ARES) began work on a 4-year project to digitize the original film negatives of Apollo Lunar Rock Sample photographs. These rock samples together with lunar regolith and core samples were collected as part of the lander missions for Apollos 11, 12, 14, 15, 16 and 17. The original film negatives are stored at JSC under cryogenic conditions. This effort is data restoration in the truest sense. The images represent the only record available to scientists which allows them to view the rock samples when making a sample request. As the negatives are being scanned, they are also being formatted and documented for permanent archive in the NASA Planetary Data System (PDS) archive. The ARES group is working collaboratively with the Imaging Node of the PDS on the archiving.
The speed of the holographic image deblurring method has recently been further enhanced by a new speed in the realization of the powerful holographic image-deblurring filter. The filter makes it possible to carry out the deblurring, in the optical computer used, in times of the order of one second. The experimental achievements using the holographic image-enhancement method are illustrated with examples ranging from out-of-focus or motion-blurred photographs, including 'amateur' photos recorded on Polaroid film, to the sharpening of the best available electron micrographs of viruses. Images recorded with X-rays, notably from rocket-borne photos of the sun, and out-of-focus photographs from cameras in NASA satellites have been similarly deblurred.
Sensitometric data obtained from all rolls of Skylab 1 original film containing sensitometric exposures applied by the Photographic Technology Division are presented. A summary is provided that identifies the supply and take-up magazine numbers, the amount of radiation, and the change in Dmax or Base + Fog due to heat and radiation for each roll of original film.
Daytime wind velocity measurements of the upper atmosphere as function of altitude were supposed to be gathered by Gemini 12 sequential photography of rocket made sodium clouds. Evaluation of the film was indicative that all 26 photographs were overexposed during the photographic sequences. The overexposures were caused by a camera shutter locked in the open position. Therefore, useful photographic data were not obtained for analysis.
Field studies of spills of Nos. 6 (Bunker C), 4, and 2 fuel oils and menhaden fish oil in the southern Chesapeake Bay have been supplemented with aerial photographic and multispectral scanner data. Thin films showed best in ultraviolet and blue bands and thick films in the green. Color film was effective for all thicknesses. Thermal infrared imagery provided clear detection, but required field temperature and thickness data to distinguish thickness/emissivity variations from temperature variations. Slick spreading rates agree with the theory of Fay (1969); further study of spreading is in progress.