Search NASA⌕ Search

SEARCH · Search NASA

Results for “PHYSICAL PROPERTY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Physical properties of the Martian surface from the Viking 1 lander - Preliminary results

Examination of the erosion of the surface of Mars caused by the descent engines of the Viking 1 lander indicates that the soil is stronger and/or denser than the 'lunar nominal' soil (an artificially produced soil with a particle size distribution similar to results for lunar soils obtained by Apollo 11) used in preflight site alteration tests. There is further evidence to suggest that the finer grains are not as small as those of the lunar nominal material, and that the soil under the lander footpads is relatively stiff. The crater, depressions, and ejecta associated with the impact of a latch pin which fell from the surface sampler are consistent with terrestrial soils with very low cohesions, small grain size, and a density of 1.2 to 1.7 g/cu cm.

Shorthill, R. W.↗
NASA NTRS1976

Physical properties of thin-film field emission cathodes with molybdenum cones

Field emission cathodes fabricated using thin-film techniques and electron beam microlithography are described, together with effects obtained by varying the fabrication parameters. The emission originates from the tip of molybdenum cones that are about 1.5 micron tall with a tip radius around 500 A. Such cathodes have been produced in closely packed arrays containing 100 and 5000 cones as well as singly. Maximum currents in the range 50-150 microamp per cone can be drawn. Life tests with the 100-cone arrays drawing 2 mA total emission (or 3 A per sq cm) have proceeded in excess of 7000 hr with about a 10% drop in emission current. Studies are presented of the emission characteristics and current fluctuation phenomena. It is tentatively concluded that the emission arises from only one or a few atomic sites on the cone tips.

Spindt, C. A.↗
NASA NTRS1977

Physical properties of the particles composing the Martian dust storm of 1971-1972

Data obtained with the infrared interferometric spectrometer (IRIS) aboard Mariner 9 during the global Martian dust storm of 1971-1972 are analyzed to study the particle sizes in detail, estimate the dust particle size distribution, and determine the dust optical depth. Theoretical spectra of the emergent intensity from dust clouds with properties similar to those of the Martian cloud are generated, deficiencies of the approximation used are discussed, and the information content of the IR aerosol spectra is assessed. Analysis of IRIS spectra from a series of orbits spread through the early months of the Mariner 9 mission indicates that the dust could have been either igneous material with an SiO2 content similar to or higher than that of a typical terrestrial sediment or clay minerals similar to those on earth. In either case, the Martian dust was differentiated by geologic or weathering processes. The dust particle size distribution between 1 and 10 microns is found to have a slope similar to that of terrestrial dust size distributions far from source regions.

Toon, O. B.↗
NASA NTRS1977

Physical properties of a polar coronal hole from 2 to 5 solar radii

Observations with a white-light coronagraph aboard Skylab are used to determine the boundaries of a coronal hole in the northern polar region and the three-dimensional density structure within the hole between heights of 2 and 5 solar radii. The boundary of the hole is found to be essentially axisymmetric about the polar axis, nearly radial from 3 to 6 solar radii, and located near 25 deg latitude at these heights. The radiances arising from the hole are interpreted as resulting from an axisymmetric density distribution whose logarithmic radial gradient is independent of position within the hole and whose magnitude increases with angular distance away from the hole's axis. The velocity distribution within the hole is obtained from the continuity equation by assuming that the particle flux flowing outward in the hole is similar to that measured for high-speed solar-wind streams at 1 AU, and it is shown that the transition from subsonic to supersonic flow occurs between 2.2 and 3 solar radii.

Munro, R. H.↗
NASA NTRS1976

The physical properties of coronal holes

Coronal hole data obtained by Skylab during the period May 1973 to February 1974 are reviewed for the region from the photosphere out through the low corona. Coronal holes have a significantly lower density and temperature than the typical background corona, possess an open divergent magnetic field structure, and are the source of the high-speed solar wind stream which give rise to recurrent geomagnetic storms. The photospheric, chromospheric, and coronal signatures of coronal holes are described, and the evolution of coronal holes is examined, with attention to the lifetimes, the differential rotation, and the areas covered by the holes. The association of coronal holes to large-scale magnetic fields and to disk activity is considered.

Bohlin, J. D.↗
NASA NTRS1978

Physical properties of solar chromospheric plages. III - Models based on Ca II and Mg II observations

Solar plages are modeled using observations of both the Ca II K and the Mg II h and k lines. A partial-redistribution approach is employed for calculating the line profiles on the basis of a grid of five model chromospheres. The computed integrated emission intensities for the five atmospheric models are compared with observations of six regions on the sun as well as with models of active-chromosphere stars. It is concluded that the basic plage model grid proposed by Shine and Linsky (1974) is still valid when the Mg II lines are included in the analysis and the Ca II and Mg II lines are analyzed using partial-redistribution diagnostics.

Kelch, W. L.↗
NASA NTRS1978

Physical properties of aerosols in Titan's atmosphere as deduced from visible observations

Analysis of the absolute value of Titan's albedo and its variation with increasing phase angle has yielded constraints on the optical properties and average particle size of the aerosols responsible for the scattering of visible light. The real index of refraction of the scattering material lies within the range 1.5 approximately less than nr approximately less than 2.0 and the average particle size is somewhere between 0.2 micrometer and 0.4 micrometer. The amount of limb darkening produced by these models leads to an occultation radius of approximately 2700 km.

Rages, K.↗
NASA NTRS1978

Physical properties of the satellites of Saturn

The photometric and bulk parameters of the known and suspected satellites of Saturn are presented in updated tables and are compared. The surface compositions of all the satellites are discussed in terms of modern photometry and spectroscopy; most if not all of the inner bodies have water frost surfaces, but the outer three satellites have surfaces of unknown composition. The few reliable mass values of some inner satellites, together with the best current values for the satellite radii, suggest mean densities representative of bulk compositions dominated by frozen volatiles, though Titan may have a substantial volume fraction of silicates. The special case of Iapetus is considered in the light of new studies of its two distinct faces and polar cap.

Cruikshank, D. P.↗
NASA NTRS1979

Lunar physical properties from analysis of magnetometer data

The electromagnetic properties of the lunar interior are discussed with emphasis on (1) bulk, crustal, and local anomalous conductivity; (2) bulk magnetic permeability measurements, iron abundance estimates, and core size limits; (3) lunar ionosphere and atmosphere; and (4) crustal magnetic remanence: scale size measurements and constraints on remanence origin. Appendices treat the phase relationship between the energetic particle flux modulation and current disc penetrations in the Jovian magnetosphere (Pioneer 10 inbound) theories for the origin of lunar magnetism; electrical conductivity anomalies associated with circular lunar maria; electromagnetic properties of the Moon; Mare Serenitatis conductivity anomaly detected by Apollo 16 and Lunokhod 2 magnetometers; and lunar properties from magnetometer data: effects of data errors.

Daily, W. D.↗
NASA NTRS1978

Physical properties of the planets and satellites from radar observations

The radar cross section of a planetary target is defined as the area of an isotropic scatterer, normal to the illumination, that would yield the observed echo intensity, if it were placed at the target's location. Attention is given to the angular scattering law, surface imagery, and topography. The observational results are discussed, taking into account the moon and the inner planets, the asteroids, the Galilean satellites, and the rings of Saturn. It is pointed out that the reach of radar astronomy has maintained nearly an exponential growth over the past three decades, as the sensitivity of available radar systems has on average more than doubled each year. There are, however, limits to this growth set by the large costs required for a new generation of observing facilities. Only modest increases in radar system sensitivity are, therefore, expected for the next decade.

Pettengill, G. H.↗
NASA NTRS1978

Hartmann flow with temperature-dependent physical properties

Attention is given to the steady, fully developed, one-dimensional flow of a liquid metal in which thermal conductivity, electrical conductivity, and viscosity are functions of temperature. It is found that the properties are decreasing functions of temperature and the first differences between temperature-dependent and constant properties are discussed.

Linn, G. T.↗
NASA NTRS1981

Certain physical properties of cobalt and nickel borides

The temperature dependence of the electrical resistivity, the thermal conductivity, and the thermal emf of cobalt and nickel borides were studied. In the case of the nickel borides the magnetic susceptibility and the Hall coefficient were determined at room temperature. The results are discussed with allowance for the current carrier concentration, the effect of various mechanisms of current-carrier scattering and the location of the Fermi level in relation to the 3d band.

Kostetskiy, I. I.↗
NASA NTRS1982

Use of Froehlich-Raimes and other electronic models for physical properties of metals and alloys

The effectiveness of the Froelich-Raimes model in treating force constants and alloy behavior is discussed. Typical predictions of trends include the deviation of Vegard's Law and the variation of the bulk modulus with pressure and with alloying elements. The simple model of Koskimaki and Waber using the linear combination of the density of states led to several useful predictions for titanium based alloys.

Waber, J. T.↗
NASA NTRS1983

Ice-rich moons and the physical properties of ice

Many of the moons of the outer planets in the solar system consist to a substantial degree of water and other ices. Such ices are thought to make up at least half, by mass, of all condensed material in the outer solar system. The surfaces and interiors of these icy satellites have undergone considerable geologic evolution, and in some cases may still be active today. So that these processes can be understood, certain critical data on the behavior of water and other ices at low (ca. 100 K) temperatures and high (ca. 10 kbar) pressures are needed. Given such data, various techniques for modeling planetary interiors can be tested to see which models best describe the conditions observed on these bodies; such models may then be used to study larger, terrestrial planets.

Consolmagno, G. J.↗
NASA NTRS1983

Eolian intracrater deposits on Mars - Physical properties and global distribution

It is noted that more than one-fourth of all craters larger than 25 km in diameter between -50 deg S and 50 deg N have localized deposits of coarse material on the floor which are associated with the dark 'splotches' that are seen visually. If homogeneous, unconsolidated materials are assumed, the measured thermal inertias of these deposits imply effective grain sizes that range from 0.1 mm to 1 cm, with a modal value of 0.9 mm. Even though these deposits are coarser and darker than the surrounding terrains and the greater part of the Martian surface, they are not compositionally distinct from materials with similar albedos. It is thought most likely that these features were formed by entrapment of marginally mobile material that can be transported into, but not out of, crater depressions by the wind. Most of the 'splotch' deposits are coarser than the dune-forming materials occurring in the north polar region and inside extreme southern latitude craters; they probably form low, broad zibar dunes or lag deposits. The distribution of intracrater deposits is seen as suggesting that the intracrater features have been buried in the interior of Arabia and that the dust deposit is less extensive at the margins and may currently be expanding.

Christensen, P. R.↗