Search NASA⌕ Search

SEARCH · Search NASA

Results for “PILOT PERFORMANCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Investigation of control, display, and crew-loading requirements for helicopter instrument approach

A ground simulation experiment was conducted on a flight simulator for advanced aircraft to investigate the influence and interaction of flight-control system, flight-director display, and crew-loading situation on helicopter flying qualities during terminal-area operations in instrument conditions. Six levels of control complexity were implemented on a representative helicopter model. The six levels of augmentation were examined with display variations consisting of raw elevation and azimuth data only and of raw data plus one-, two-, and three-cue flight directors. Crew-loading situations simulated for the control-display combinations were dual-pilot operation and single-pilot operation. Four pilots performed a total of 150 evaluations of combinations of these parameters for a representative microwave landing system approach task. Pilot rating results indicated the existence of a control display trade-off for ratings of satisfactory, whereas ratings of adequate-but-unsatisfactory depended primarily on the control system; the control system required for ratings of adequate-but-unsatisfactory was clearly more complex for the single-pilot situation than that for the dual-pilot situation.

Lebacqz, J. V.↗
NASA NTRS1992

Helmet mounted display flight symbology research

Screen/head stabilized MIL-STD 1295 helmet mounted display (HMD) flight symbology as integrated on the Apache helicopter was compared to world referenced/stabilized flight symbology. Simulation test results indicate that pilots perform significantly better using world-stabilized conformal attitude symbology. They were accurate to an average of 1/2 degree at estimating terrain relief and aerial target locations. World stabilized conformal symbology was preferred while performing contour flight tasks. They reported that the use of climb-dive-marker during contour flight greatly reduced pilot work load under conditions tested. Cyclic input errors occurred when using both 1295 hover symbology and test symbology indicating that a better approach for depicting hover symbology is warranted. The magnitude of cyclic input and spatial estimation errors increased as the off-axis viewing angle became larger.

Haworth, Loran A.↗
NASA NTRS2005

Inductive Learning Approaches for Improving Pilot Awareness of Aircraft Faults

Neural network flight controllers are able to accommodate a variety of aircraft control surface faults without detectable degradation of aircraft handling qualities. Under some faults, however, the effective flight envelope is reduced; this can lead to unexpected behavior if a pilot performs an action that exceeds the remaining control authority of the damaged aircraft. The goal of our work is to increase the pilot s situational awareness by informing him of the type of damage and resulting reduction in flight envelope. Our methodology integrates two inductive learning systems with novel visualization techniques. One learning system, the Inductive Monitoring System (IMS), learns to detect when a simulation includes faulty controls, while two others, Inductive Classification System (INCLASS) and multiple binary decision tree system (utilizing C4.5), determine the type of fault. In off-line training using only non-failure data, IMS constructs a characterization of nominal flight control performance based on control signals issued by the neural net flight controller. This characterization can be used to determine the degree of control augmentation required in the pitch, roll, and yaw command channels to counteract control surface failures. This derived information is typically sufficient to distinguish between the various control surface failures and is used to train both INCLASS and C4.5. Using data from failed control surface flight simulations, INCLASS and C4.5 independently discover and amplify features in IMS results that can be used to differentiate each distinct control surface failure situation. In real-time flight simulations, distinguishing features learned during training are used to classify control surface failures. Knowledge about the type of failure can be used by an additional automated system to alter its approach for planning tactical and strategic maneuvers. The knowledge can also be used directly to increase the pilot s situational awareness and inform manual maneuver decisions. Our multi-modal display of this information provides speech output to issue control surface failure warnings to a lesser-used communication channel and provides graphical displays with pilot-selectable !eve!s of details to issues additional information about the failure. We also describe a potential presentation for flight envelope reduction that can be viewed separately or integrated with an existing attitude indicator instrument. Preliminary results suggest that the inductive approach is capable of detecting that a control surface has failed and determining the type of fault. Furthermore, preliminary evaluations suggest that the interface discloses a concise summary of this information to the pilot.

Spikovska, Lilly↗
NASA NTRS2017

Unmanned Aircraft Systems (UAS) Integration in the National Airspace System (NAS) Project: Detect and Avoid Display Evaluations in Support of SC-228 Minimum Operational Performance Standards Development

The primary activity for the UAS-NAS Human Systems Integration (HSI) sub-project in Phase 1 was support of RTCA Special Committee 228 Minimum Operational Performance Standards (MOPS). We provide data on the effect of various Detect and Avoid (DAA) display features with respect to pilot performance of the remain well clear function in order to determine the minimum requirements for DAA displays.

detect and avoid↗
NASA NTRS1982

A ground-simulator investigation of helicopter longitudinal flying qualities for instrument approach

A ground-simulation experiment was conducted to investigate the direct and interactive influences of several longitudinal static and dynamic stability parameters on helicopter flying qualities during terminal-area operations in instrument conditions. Variations that were examined included five levels of static control-position gradients ranging from stable to unstable; two levels of dynamic stability for the long-period oscillation; two levels of the steady-state pitch speed gradient; two levels of angle-of-attack stability and pitch-rate damping; and two levels of stability and control augmentation. These variations were examined initially in calm air and thin in simulated light-to-moderate turbulence and wind shear. Five pilots performed a total of 223 evaluations of these parameters for a representative microwave landing system precision approach task conducted in a dual-pilot crew-loading situation.

Lebacqz, J. V.↗
NASA NTRS1987

Integration of altitude and airspeed information into a primary flight display via moving-tape formats

A ground-based aircraft simulation study was conducted to determine the effect on pilot performance of replacing the electromechanical altimeter and airspeed indicators with electronically generated representations integrated into the primary flight display via moving-tape (linear moving scale) formats. Several key factors relating to moving-tape formats were examined during the study: tape centering, secondary (trend) information, and tape orientation. The factor of centering refers to whether the tape was centered about the actual airspeed or altitude or about some defined reference value. Tape orientation refers to whether the values represented are arranged in either descending or ascending order. Six pilots participated in this study, with each subject performing 18 runs along a single, known flight profile. Subjective results indicated that the moving-tape formats were generally better than that of the conventional instruments. They also indicated that an actual-centered fixed pointer was preferred to a reference-centered pointer. Performance data for a visual secondary task showed that formats not containing trend information produced better performance; however, no difference was noted in airspeed tracking or altitude tracking performance. Regarding tape orientation, subjective comments indicated that there was lower work load and better performance when the airspeed tape had the high numbers at the top.

Abbott, Terence S.↗
NASA NTRS1977

The Multi-Dimensional Nature of Wind Shear Investigations

The impact of air carrier accidents has lead to investigations into the wind shear phenomenon. This report includes such topics as wind shear characterization, aircraft pilot performance in shear conditions, terminology and language development, wind shear forecasting, ground and flight wind shear displays, wind shear data collection and dissemination, and pilot factors associated with wind shear encounters. Some areas which show promise for short term solutions to the wind shear hazards includes: (1) improved gust front warning through ground based sensors; (2) greater pilot awareness of wind shear through improved training; and (3) airborne displays based on groundspeed/airspeed comparisons.

Cox, W. J.↗
NASA NTRS2017

Refinement of Objective Motion Cueing Criteria Investigation Based on Three Flight Tasks

The objective of this paper is to refine objective motion cueing criteria for commercial transport simulators based on pilots' performance in three flying tasks. Actuator hardware and software algorithms determine motion cues. Today, during a simulator qualification, engineers objectively evaluate only the hardware. Pilot inspectors subjectively assess the overall motion cueing system (i.e., hardware plus software); however, it is acknowledged that pinpointing any deficiencies that might arise to either hardware or software is challenging. ICAO 9625 has an Objective Motion Cueing Test (OMCT), which is now a required test in the FAA's part 60 regulations for new devices, evaluating the software and hardware together; however, it lacks accompanying fidelity criteria. Hosman has documented OMCT results for a statistical sample of eight simulators which is useful, but having validated criteria would be an improvement. In a previous experiment, we developed initial objective motion cueing criteria that this paper is trying to refine. Sinacori suggested simple criteria which are in reasonable agreement with much of the literature. These criteria often necessitate motion displacements greater than most training simulators can provide. While some of the previous work has used transport aircraft in their studies, the majority used fighter aircraft or helicopters. Those that used transport aircraft considered degraded flight characteristics. As a result, earlier criteria lean more towards being sufficient, rather than necessary, criteria for typical transport aircraft training applications. Considering the prevalence of 60-inch, six-legged hexapod training simulators, a relevant question is "what are the necessary criteria that can be used with the ICAO 9625 diagnostic?" This study adds to the literature as follows. First, it examines well-behaved transport aircraft characteristics, but in three challenging tasks. The tasks are equivalent to the ones used in our previous experiment, allowing us to directly compare the results and add to the previous data. Second, it uses the Vertical Motion Simulator (VMS), the world's largest vertical displacement simulator. This allows inclusion of relatively large motion conditions, much larger than a typical training simulator can provide. Six new motion configurations were used that explore the motion responses between the initial objective motion cueing boundaries found in a previous experiment and what current hexapod simulators typically provide. Finally, a sufficiently large pilot pool added statistical reliability to the results.

motion simulation↗
NASA NTRS1988

Dynamic perspective displays and the control of tilt-rotor aircraft in simulated flight

Two simulations were conducted to study the effect of dynamic perspective displays on performance measures collected during simulated flight. The first study was a pure altitude regulation task with simple first order plant dynamics. In the second simulation, pilots performed two basic rotary-wing flight tasks with dynamic perspective displays projected out-the-window (panoramic head up display) or on a panel mounted simulation of a sensor display. The data from the two studies, taken together, show that when such displays are used during flight, they will not degrade performance; and, under certain display configurations, they will minimize flight control errors.

Bennett, C. T.↗
NASA NTRS1961

A Simulator Study of the Effectiveness of a Pilot's Indicator which Combined Angle of Attack and Rate of Change of Total Pressure as Applied to the Take-Off Rotation and Climbout of a Supersonic Transport

A simulator study has been made to determine the effectiveness of a single instrument presentation as an aid to the pilot in controlling both rotation and climbout path in take-off. The instrument was basically an angle-of-attack indicator, biased with a total-pressure-rate input as a means of suppressing the phugoid oscillation. Linearized six-degree-of-freedom equations of motion were utilized in simulating a hypothetical supersonic transport as the test vehicle. Each of several experienced pilots performed a number of simulated take-offs, using conventional flight instruments and either an angle-of-attack instrument or the combined angle-of-attack and total-pressure-rate instrument. The pilots were able to rotate the airplane, with satisfactory precision, to the 15 deg. angle of attack required for lift-off when using either an angle-of-attack instrument or the instrument which combined total-pressure-rate with angle of attack. At least 4 to 6 second-S appeared to be required for rotation to prevent overshoot, particularly with the latter instrument. The flight paths resulting from take-offs with simulated engine failures were relatively smooth and repeatable within a reasonably narrow band when the combined angle-of-attack and total-pressure-rate instrument presentation was used. Some of the flight paths resulting from take-offs with the same engine-failure conditions were very oscillatory when conventional instruments and an angle-of-attack instrument were used. The pilots considered the combined angle-of-attack and total- pressure-rate instrument a very effective aid. Even though they could, with sufficient practice, perform satisfactory climbouts after simulated engine failure by monitoring the conventional instruments and making correction based on their readings, it was much easier to maintain a smooth flight path with the single combined angle-of-attack and total-pressure-rate instrument.

Hall, Albert W.↗
NASA NTRS1988

Pilot workload prediction

A predicting model of pilot workload is developed using a time-based algorithm, work-load values from previous research, and experimental data obtained by a group of experienced pilots on a Singer-Link Gat-1 instrument trainer with three degrees of motion (roll, pitch, and yaw). Each pilot performed three experimental flights presented in a counterbalanced order; each flight consisted of short, medium, or long cruise and initial approach segments. Results strongly suggest that pilots were more sensitive to the rate at which work was done than to the total amount of work accomplished. The result of predictions obtained with the model showed that the time-weighted average of the component work-load ratings were able to predict the obtained work-load ratings accurately.

Pepitone, David D.↗
NASA NTRS2018

Time-Varying Manual Control Identification in a Stall Recovery Task Under Different Simulator Motion Conditions

This paper adds data to help the development of simulator motion cueing guidelines for stall recovery training by identifying time-varying manual control behavior in a stall recovery task under different simulator motion conditions. A study was conducted with seventeen general aviation pilots in the NASA Ames Vertical Motion Simulator. Pilots had to follow a flight director through four stages of a high-altitude stall task. A time-varying identification method was used to quantify how pilot manual control parameters change throughout different stages of the task in both roll and pitch. Four motion configurations were used: no motion, generic hexapod motion, enhanced hexapod motion and full motion. Pilot performance was highest for the enhanced hexapod and full motion configurations in both roll and pitch, and the lowest without motion. In the roll axis, the pilot position gain did not significantly change throughout the stall task, but was the lowest for the condition with no motion. The pilot roll velocity gain was significantly different between motion conditions, the largest difference being found close to the stall point. The enhanced hexapod motion condition had the highest pilot roll velocity gain. In the pitch axis, the pilot position gain was significantly different between time segments but not between motion conditions. The pilot pitch velocity gain was highest for the full motion condition and increased close to the stall point, but did not change significantly for the other motion conditions. Overall, pilot control behavior under enhanced hexapod motion was most similar to that under full aircraft motion. This indicates that motion cueing for stall recovery training on hexapod simulators might be improved by using the principles behind the enhanced hexapod motion configuration.

manual control↗
NASA NTRS2016

SC-228 Inclusion of DAA Warning Alert for TCAS Interoperability

This white paper summarizes NASA research results that have informed Special Committee 228 (SC-228) discussions and decisions regarding the inclusion of a warning-level alert within the detect and avoid (DAA) alerting structure for unmanned aircraft systems (UAS). For UAS, the removal of the pilot from onboard the aircraft has eliminated the ability of the ground-based pilot in command (PIC) to use out-the-window visual information to make judgments about a potential threat of a loss of well clear with another aircraft. As a result, the DAA traffic display will be the primary source of information that the PIC can use to execute the three primary well clear functions: 1) detect a potential loss of well clear, 2) determine a resolution maneuver, and 3) upload that maneuver to the aircraft via the ground control station (GCS). In addition, pilots are required to coordinate with air traffic control (ATC) prior to maneuvering off of their approved flight plan. In determining an appropriate resolution maneuver to avoid a loss of well clear, the PIC must decide both when and how to maneuver, and both the timeliness and the accuracy (i.e., correctness) of the maneuver are critical to reducing the likelihood and/or severity of a loss of well clear. Alerting information is one of three critical components of the DAA display, along with traffic information elements (e.g., relative heading, speed and altitude) and maneuver guidance. Alerting information and maneuver guidance, in particular, have been found to have a significant impact, both statistically and practically, on pilots' ability to avoid and minimize the severity of losses of well clear While all three display components are key to pilots performing the traffic avoidance task of remaining well clear, in general, alerting information provides crucial information about when a resolution maneuver is required while maneuver guidance assists the pilot in determining how best to maneuver. A fundamental task of the DAA alerting system is to provide critical timing information to the pilot about the potential for a loss of well clear with another aircraft. This is done by employing both temporal and spatial thresholds that indicate to the pilot the likelihood and imminence of a loss of well clear. The design of the DAA alerting thresholds is a balancing act between eliciting the desired pilot response in real loss of well clear threat events and reducing excessive, unnecessary, and/or uncoordinated UAS maneuvering within the air traffic environment; larger thresholds, both spatially and temporally, may increase the likelihood of a pilot avoiding a loss of well clear, but it can also increase the frequency of maneuvering - especially in cases where a maneuver is not actually needed to maintain well clear. A series of human in the loop (HITL) simulations have been conducted as part of NASA's Unmanned Aircraft Systems (UAS) Integration in the National Airspace System (NAS) project. The purpose of these HITLs has been to provide empirical results in order to inform development of the minimum human-machine interface requirements for the DAA system. This white paper will present those results which provide evidence of a human performance benefit (in terms of response times and ability to remain well clear of other aircraft) of the DAA warning alert both with and without a collision avoidance system on board the aircraft.

TCAS interoperability↗
NASA NTRS1976

Pilot interaction with automated airborne decision making systems

An investigation was made of interaction between a human pilot and automated on-board decision making systems. Research was initiated on the topic of pilot problem solving in automated and semi-automated flight management systems and attempts were made to develop a model of human decision making in a multi-task situation. A study was made of allocation of responsibility between human and computer, and discussed were various pilot performance parameters with varying degrees of automation. Optimal allocation of responsibility between human and computer was considered and some theoretical results found in the literature were presented. The pilot as a problem solver was discussed. Finally the design of displays, controls, procedures, and computer aids for problem solving tasks in automated and semi-automated systems was considered.

Rouse, W. B.↗
NASA NTRS2015

How To Make the Most of Your Human: Design Considerations for Single Pilot Operations

Reconsidering the function allocation between automation and the pilot in the flight deck is the next step in improving aviation safety. The current allocation, based on who does what best, makes poor use of the pilot's resources and abilities. In some cases it may actually handicap pilots from performing their role. Improving pilot performance first lies in defining the role of the pilot - why a human is needed in the first place. The next step is allocating functions based on the needs of that role (rather than fitness), then using automation to target specific human weaknesses in performing that role. Examples are provided (some of which could be implemented in conventional cockpits now). Along the way, the definition of human error and the idea that eliminating/automating the pilot will reduce instances of human error will be challenged.

Schutte, Paul C.↗
NASA NTRS1975

Wet runways

Aircraft stopping and directional control performance on wet runways is discussed. The major elements affecting tire/ground traction developed by jet transport aircraft are identified and described in terms of atmospheric, pavement, tire, aircraft system and pilot performance factors or parameters. Research results are summarized, and means for improving or restoring tire traction/aircraft performance on wet runways are discussed.

Horne, W. B.↗