Search NASA⌕ Search

SEARCH · Search NASA

Results for “PLASMA RADIAL PROFILES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Measurement of Poloidal Velocity on the National Spherical Torus Experiment

A diagnostic suite has been developed to measure impurity poloidal flow using charge exchange recombination spectroscopy on the National Spherical Torus Experiment. Toroidal and poloidal viewing systems measure all quantities required to determine the radial electric field. Two sets of up/down symmetric poloidal views are used to measure both active emission in the plane of the neutral heating beams and background emission in a radial plane away from the neutral beams. Differential velocity measurements isolate the line-integrated poloidal velocity from apparent flows due to the energy-dependent chargeexchange cross section. Six f/1.8 spectrometers measure 276 spectra to obtain 75 active and 63 background channels every 10 ms. Local measurements from a similar midplane toroidal viewing system are mapped into two dimensions to allow the inversion of poloidal line-integrated measurements to obtain local poloidal velocity profiles. Radial resolution after inversion is 0.6-1.8 cm from the plasma edge to the center.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Plasma density accumulation on a conical surface for diffusion along a diverging magnetic field

Two-dimensional (2-D) density and potential measurements have been carried out for plasma diffusing through an aperture in a diverging magnetic field. The radial density profile near the source is peaked on the axis but gradually evolves into a hollow profile away from the source. We observe a slow increase of the peak density along a hollow conical surface and correlate with the 2-D potential measurement reported earlier. It is also shown that the formation of 2-D structures with similar features are observed whenever plasma is allowed to diffuse through a physical aperture in such diverging magnetic field configuration, with or without the presence of electric double layer, i.e., the phenomenon is generic in nature.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

High-field side scrape-off layer density profile measurements and implications for high-field side LHCD coupling in DIII-D

The high-field side (HFS) scrape-off layer (SOL) is an often under-diagnosed region of tokamak plasmas. Situated in a region with favorable curvature, the HFS SOL has minimal turbulence-induced radial transport compared to the low-field side. Using profile reflectometry, the HFS SOL density profile is measured with high temporal resolution for a wide range of DIII-D plasma discharges for the first time. The magnetic configuration, particularly the location of the secondary separatrix (SS) largely determines the HFS SOL density profile. Additionally, density perturbations induced by edge-localized modes (ELMs) are observed in the HFS SOL, and the impact of ELMs on the SOL density profile is characterized for a range of magnetic configurations. It is found that ELM-induced HFS SOL perturbations are generally localized to within the SS and ELM-induced changes to the HFS wall density are minimized in near double-null configurations. The characterization of the HFS SOL density profile on DIII-D is crucial for the effective coupling of the planned HFS lower hybrid current drive (LHCD) launcher. Experimental HFS SOL measurements are used as input to full-wave simulations of LHCD coupling. Furthermore, this work simulates the effect of the magnetic configuration on LHCD coupling. It also simulates LHCD coupling in ELMs and high q min discharges. During such discharges, the LHCD coupling is predicted to be resilient to ELM-induced SOL density perturbations.

high-field side↗

A new stabilizing regime of tearing mode entrainment in the presence of a static error field

Uncorrected static error fields in axisymmetric fusion devices are one of few remaining serious obstacles for advancing the present tokamak-based approach to practical reactors. The disruption due to magnetohydrodynamic tearing mode locking is one of them. Recently, a hypothesis has been proposed that there may exist a self-healing stabilized regime in which the static resonant error field is effectively shielded by forcing the mode slowly to rotate inductively by the applied non-axisymmetric field, that has been developed based on non-linear, resistive, reduced MHD simulation with cylindrical single helicity model. Proof-of-principle experiments in the DIII-D device showed that the magnetic mode structure on the plasma surface is qualitatively consistent with the simulation prediction. However, radial mode profiles revealed qualitatively different behavior. This finding led to a revised hypothesis that in actual non-circular toroidal devices, a tearing layer in forced rotation induces the shielding-out process at other rational surfaces when we take into account of multi-resonant Fourier components. The time evolution of the radial penetration was supportive of this hypothesis.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Modification of Edge Profiles, Edge Transport, and ELM Stability with Lithium in NSTX

We report results of an experiment in which lithium wall coatings were graduallyintroduced into NSTX, resulting in a gradual improvement in energy confinement, alterationof edge plasma profiles, and growing periods of ELM suppression. As a result of increasinglithium wall coatings, recycling and edge fueling were reduced, which relaxed the edgedensity profile gradients. In contrast, the edge Te profile was unaffected in the H-modepedestal steep gradient region at constant plasma stored energy; however, the region of steepTe gradients extended radially inward by several cm following lithium coatings.Consequently, the pressure profile width and pedestal height increased substantially, while theELM-free discharge peak pressure gradients were comparable to the pre-lithium ELMydischarge gradients. The measured edge profiles in discharges with and without lithium weresimulated with the SOLPS code, which indicated that both a reduction in recycling and a dropin the edge and SOL cross-field transport was required to match the post-lithium profiles.Edge stability calculations showed that the discharges with lithium coatings were farther fromthe low-n kink/peeling modes boundary than the pre-lithium discharges.

Maingi, Rajesh↗

Numerical assessment of the new V-shape small-angle slot divertor on DIII-D

The small-angle slot (SAS) divertor of the DIII-D tokamak, and its upcoming upgrade, the V-shape small-angle slot (SAS-V) divertor, are numerically investigated using the SOLPS-ITER code package, including the effect of particle drifts, for a range of plasma density, heating power, strike point position in the slot, and for both magnetic field directions. The simulations show that the electron temperature near the strike point is reduced in SAS-V compared to SAS, for both magnetic field directions, such that SAS-V achieves divertor detachment at a lower value of the outboard mid-plane separatrix electron density. The detachment threshold is lower because the V-shape focuses recycling neutrals on the V-end, densifying and cooling the plasma in the slot. At sufficiently high density, the V-shape also reduces the radial gradient of the temperature profile at the target, which in turns reduces the radial electric field and the E x B drift velocities, further densifying and cooling the plasma in the slot and leading to detachment. The V-shape effect, however, is reduced for higher heating power. With more heating power, the detachment density increases, reducing the ionization mean free path of recycled neutrals, which therefore become less sensitive to target shape changes. Furthermore, this suggests that in a fusion reactor, where the heating power is high, optimization of the divertor target shape needs to be combined with other strategies to lower the detachment density, such as in-slot injection of low-Z impurities.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Blobs and drift wave dynamics

The modified Hasegawa-Mima equation retaining all nonlinearities is investigated from the point of view of the formation of blobs. The linear analysis shows that the amplitude of the drift wave packet propagating in the direction of decreasing background plasma density increases and eventually saturates due to nonlinear effects. Nonlinear modification of the time averaged plasma density profile results in the formation of large amplitude modes locked in the radial direction, but still propagating in the poloidal direction, which resembles the experimentally observed chain of blobs propagating in the poloidal direction. Such specific density profiles, causing the locking of drift waves, could form naturally at the edge of tokamak due to a neutral ionization source. Thus, locked modes can grow in situ due to plasma instabilities, e.g., caused by finite resistivity. Furthermore, the modulation instability (in the poloidal direction) of these locked modes can result in a blob-like burst of plasma density.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Edge electron density profiles and fluctuations measured by two-dimensional beam emission spectroscopy in the KSTAR

Beam emission spectroscopy (BES) system in Korea Superconducting Tokamak Advanced Research (KSTAR) has recently been upgraded. The background intensity was reduced from 30% to 2% by suppressing the stray lights. This allows acquisition of the relative electron density profiles on the plasma edge without background subtraction from the beam power modulation signals. The KSTAR BES system has its spatial resolution of 1 cm, the temporal resolution of 2 MHz, and a total 32 channel (8 radial × 4 poloidal) avalanche photo diode array. Most measurements were done on the plasma edge, r/a ∼ 0.9, with 8 cm radial measurement width that covers the pedestal range. High speed density profile measurements reveal temporal behaviors of fast transient events, such as the precursors of edge localized modes and the transitions between confinement modes. Low background level also allows analysis of the edge density fluctuation patterns with reduced background fluctuations. Propagation of the density structures can be investigated by comparing the phase delays between the spatially distributed channels.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Time and space resolved visible spectroscopic imaging CO{sub 2} laser produced extreme ultraviolet emitting tin plasmas

Experiments involving laser produced tin plasma have been carried out using a CO{sub 2} laser with an energy of 800 mJ/pulse and a full width at half maximum (FWHM) of 80 ns in vacuum. Time-integrated extreme ultraviolet spectral measurement showed that the peak of the extreme ultraviolet lithography spectrum was located at 13.5 nm and the spectrum profile's FWHM of the unresolved transition arrays was 1.1 nm. Plasma parameters of the electron temperature and density measurements in both axial and radial directions at later times had been obtained from a two-dimensional time and space resolved image spectra analysis. The axial spatial distribution of the electron density showed a 1/d{sup 2.6} decrease profile, and the radial spatial distribution of the electron density showed a 1/r{sup 1.1} profile, in which d is the axial distance from the target surface and r is the radial distance. The electron density was found to maintain symmetry across the radial distance at all delay times. Near the plasma plume center, the electron temperature T{sub e} varied slightly with increasing axial or radial distance, which was related to collisional decoupling and reheating of the ionized species in the plasma at distances longer than 3 to 4 mm. The space averaged electron temperature was measured in the range of 3.4-1.0 eV, and the space averaged electron density was measured in the range of 2.0 x 10{sup 17} to 2.2 x 10{sup 16} cm{sup -3}, as the time delay varied from 1.6 {mu}s to 3.6 {mu}s with respect to the pulse discharge. Time evolutions of the plasma temperature and density were found to have an apparent rise at a delay time of 2.4 {mu}s in the corresponding time of the laser pulse tail peak. This suggests that plasma parameters and extreme ultraviolet emission intensity can be controlled by a double pulse combined laser.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Role of fluctuations and flows in sustaining mean profiles in a current less toroidal plasma

The flow and fluctuation measurements in a simple magnetized current less toroidal plasma have been conducted. The measured plasma parameter profiles are observed to be accompanied by large fluctuations. The existence of large fluctuations and filling of plasma in the entire radial domain are observed to be closely related to each other. The ExB drift velocities calculated from the gradient of measured mean plasma potential profile have shown significant deviation from the net flow velocity measurements. Interestingly, it is observed that the measured fluctuation driven flow velocity, which is opposite in direction to the mean field driven flow, partially accounts for the observed difference between the net flow and the mean electric field driven flow.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

H-mode grade confinement in L-mode edge plasmas at negative triangularity on DIII-D

Plasmas with a negative triangularity shape have been created on the DIII-D tokamak that, despite maintaining standard L-mode edge radial profiles, reach volume averaged pressure levels typical of H-mode scenarios. Within the auxiliary power available for these experiments, plasmas exhibit near-zero power degradation while sustaining β N = 2.7 and H 98, y 2 = 1.2 for several energy confinement times. Detailed comparison with matched discharges at positive triangularity indicates that Trapped Electron Modes are weakened at negative triangularity, consistent with increased confinement and reduced intensity of fluctuations in electron density, electron temperature, and ion density. Furthermore, these results indicate that a negative triangularity plasma operating without an edge pedestal might provide an attractive scenario for operations in future reactors.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Isotope dependence of transport in ST40 hot ion mode plasmas

The ST40 compact, high-field spherical tokamak, operating at 2.1 T and with 1.8 MW of neutral beam heating, achieved central carbon impurity ion temperatures in excess of 10 keV, surpassing their business milestone of 100 M °C (8.6 keV). The high temperature discharges were in the hot ion mode, with $T_i \gg T_e$, and they were achieved in both hydrogen and deuterium plasmas with deuterium neutral beam injection. In order to achieve the high temperature scenarios, careful wall conditioning and scenario optimization was carried out in $H^0 \rightarrow H^+$, $D^0 \rightarrow H^+$, and finally in $D^0 \rightarrow D^+$ plasmas. The TRANSP transport code was employed to study the dependence of confinement and transport on isotopic mass, and the conditions that led to the high measured central ion temperatures in the $D^0 \rightarrow H^+$ and $D^0 \rightarrow D^+$ plasmas. The kinetic profiles input into TRANSP were inferred from line-of-sight and limited radial measurements as well as consistency with a number of other experimental constraints. The TRANSP results first showed that the main species central ion temperature was only 0.5–1 keV lower than the measured carbon impurity temperature, and thus in the high performance plasmas also surpassed the 100 M °C level. TRANSP also showed that while the electron thermal conduction loss was dominant, reductions in central ion transport, and an effective decoupling of the ions from the electrons, led to an increase in central ion temperatures with increasing plasma mass. In fact, the associated confinement times exhibited a strong dependence on the isotopic mass of the thermal plasma. These preliminary results are foundations for dedicated experiments with full kinetic profile measurements on ST40 in the next run campaign.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Measurement of poloidal velocity on the National Spherical Torus Experiment (invited)

A diagnostic suite has been developed to measure the impurity poloidal flow using charge exchange recombination spectroscopy on the National Spherical Torus Experiment. Toroidal and poloidal viewing systems measure all the quantities required to determine the radial electric field. Two sets of up/down symmetric poloidal views are used to measure both the active emission in the plane of the neutral heating beams and the background emission in a radial plane away from the neutral beams. Differential velocity measurements isolate the line-integrated poloidal velocity from apparent flows due to the energy-dependent charge exchange cross section. Six f/1.8 spectrometers measure 276 spectra to obtain 75 active and 63 background channels every 10 ms. The local measurements from a similar midplane toroidal viewing system are mapped into two dimensions to allow the inversion of poloidal line-integrated measurements to obtain local poloidal velocity profiles. The radial resolution after inversion is 0.6-1.8 cm from the plasma edge to the center.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Nonlinear dispersion and transverse profile of intense electromagnetic waves, propagating through electron-positron-ion hot magnetoplasma

Self-guided nonlinear propagation of intense circularly-polarized electromagnetic waves in a hot electron-positron-ion magnetoplasma is studied. Using a relativistic fluid model, a nonlinear equation is derived, which describes the interaction of the electromagnetic wave with the plasma in the quasi-neutral approximation. Transverse Eigen modes, the nonlinear dispersion relation and the group velocity are obtained. Results show that the transverse profile in the case of magnetized plasma with cylindrical symmetry has a radially damping oscillatory form. Effect of applying external magnetic fields, existence of the electron-positron pairs, changing the amplitude of the electromagnetic wave, and its polarization on the nonlinear dispersion relation and Eigen modes are studied.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Model for current drive induced crash cycles in W7-X

In the Wendelstein 7-X (W7-X) stellarator, the vacuum rotational transform, ι, has a flat radial profile and does not cross any major rational resonance. Nevertheless, during plasma operation the ι–profile can be strongly modified by electron cyclotron current drive in such a way that the resulting ι-profile passes through low-order rational values, and this can trigger magnetohydrodynamic (MHD) events. Indeed, W7-X plasmas are sometimes subject to repetitive collapses of core confinement, which can be observed regardless of the direction in which the EC current is driven. Even though the origin of these MHD instabilities is under investigation, the crashes may be connected to the formation of magnetic islands and magnetic reconnection. In the present work, we try to shed light on the dynamics of different events happening during the course of sawtooth cycles in W7-X by proposing a model that combines a slow current diffusion with a recipe for fast relaxation that conserves the corresponding helical flux (Kadomtsev 1975 Fiz. Plazmy 1 710–15). We also propose a simple model based on Taylor relaxation (Taylor 1974 Phys. Rev. Lett. 33 1139), (Taylor 1986 Rev. Mod. Phys. 58 741) to predict the nonlinear redistribution of plasma current caused by the largest of the observed events.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Role of Combined NNBI and ICRH Heating in FAST H-mode plasmas

The combination of ICRH+NNBI in FAST allows the generation of fast ion populations with different velocity space anisotropy and radial profiles. These energetic ion populations can excite meso-scale fluctuations with the same characteristics of those expected in reactor conditions and, for this reason, FAST can address a number of important burning plasma physics issues. Numerical simulation and modeling of energetic particle physics are based on the use of transport codes that are iteratively coupled with a bi-dimensional full wave-quasi-linear solver for ICRH, in order to determinate the normalized supra-thermal population pressure ss{sub hot}. The value of ss{sub hot}. as well the energetic particle distribution functions can be used as initial condition for numerical simulation studies, investigating the destabilization and saturation of fast ion driven Alfvenic modes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Simulation of plasma density evolution in the T-10 tokamak

Analysis of the experimental profiles of the plasma density and pressure in the T-10 tokamak shows that in the plasma core they are close to the corresponding canonical profiles. This allows one to construct an expression for the particle flux in terms of the canonical profile model. T-10 experiments performed with ohmic discharges have revealed transitions from improved to low particle confinement, similar to the effect of the density pump-out from the central part of the plasma upon switching-on of the electron cyclotron resonance heating (ECRH). It is shown that such a change in the particle confinement is associated with the deviation of the radial pressure profile from the canonical one. A nonlinear model of particle transport in discharges with density variations that allows for the transition effects is proposed. The plasma density evolution is numerically simulated for a number of ohmic and ECRH T-10 discharges.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

On the frequency bifurcations of the MHD startup modes in NSTX

The observed bifurcations of the low frequency (<50 kHz) and low toroidal periodicity (n < 5) magnetohydrodynamic (MHD) activity often present in the initial part of the National Spherical Tokamak Experiment (NSTX) discharges can be explained by the evolution of the radial profile of the safety factor (q=rB φ /RB θ ) crossing multiple rational surfaces in the core. Important performance limiting instability mechanisms in the NSTX spherical tokamak are often linked to low frequency and low-n MHD activity. They are quite common in long-pulse NSTX plasmas. They can be present at the beginning of the plasma current flat-top, at the end of the discharge or during the whole duration, and they have been observed to deleteriously impact performance over a wide range of q 95 . An interesting feature observed in some NSTX discharges is the presence of a bifurcation in the frequency of the low n modes, as low as n = 1, that have frequencies comparable to the plasma core rotation divided by n. Equilibrium reconstructions constrained by magnetic diagnostics data and motional stark effect pitch angle radial profiles suggest that the observed bifurcations are linked to a fast evolving minimum value of q. Finally, 3D non-linear resistive MHD simulations show that these modes are ideal and exist as non-resonant before the correspondent rational surface enters the plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗