Search NASA⌕ Search

SEARCH · Search NASA

Results for “POTENTIAL PROBLEM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Prediction of neutron production and energy spectrum by the inverse kinematic reaction between an incident 7 Li 3+ beam and a proton target in PHITS

A neutron source using the inverse kinematic reaction between lithium and proton, p( 7 Li, n) 7 Be, achieves forward-directed neutrons, potentially enhancing neutron yield in the forward direction. Despite the advantage, no evaluated-cross-section data for this reaction can be used in Monte Carlo simulation codes, such as PHITS. To solve this problem, this study aims to evaluate the applicability of the user-defined cross-section data, Frag data, for p ( 7 Li, n) 7 Be in PHITS. The simulations reproduced collisions between 7 Li 3+ ions and polypropylene targets. The Frag data was edited based on the JENDL-5 by utilizing the two-body collision kinematics. The neutron yield and angular distribution were investigated in the simulation. As a result, the forward neutron convergence with a reasonable neutron yield and energy spectrum was observed. The expected neutron yield in the forward 1-steradian area is 2.46 × 10 10 n/s when lithium-ion energy and current are 16.45 MeV and 0.1 mA.

43 PARTICLE ACCELERATORS↗
DOE OSTI2024

Carbon-sequestration gradient insulation composites

The massive use of carbon-sequestration building materials promises a potential global carbon sink in decarbonizing the building industry. Renewable biogenic materials from abundant agriculture waste for building practice have been around over thousands of years. However, in addition to their flammability and moisture problems, addressing their low thermal and structural performance is also becoming indispensable and urgent when it comes to environmentally sustainable and energy-efficient buildings. Here, we report a nature-inspired biogenic gradient insulation composite with an optimized silica concentration of 30 wt %, a density of 0.246 g/cm 3 , and a porosity of 86%. The gradient hybrid composite exhibits a thermal conductivity of 28.2 mW m -1 K -1 , which is the lowest achieved under optimal preparation conditions. Here, it also shows a flexural modulus of 590 MPa for the aerogel-rich layer without surface modification, and it demonstrates superior fire retardancy and superhydrophobicity after surface treatment.

36 MATERIALS SCIENCE↗
DOE OSTI2026

From diamond to BC8 to simple cubic and back: Kinetic pathways to post-diamond carbon phases from metadynamics

Understanding the kinetic pathways connecting carbon polymorphs at multimegabar pressures remains a major unsolved problem in high-pressure physics. Here, we provide insights into the long-standing question of BC8 formation and stability by combining a state-of-the-art SNAP machine-learning interatomic potential with enhanced sampling via metadynamics, enabling direct access to transition mechanisms far beyond the reach of standard molecular dynamics. Our simulations show that carbon phase transformations are intrinsically complex, proceeding through multiple intermediate disordered and crystalline states governed by nontrivial kinetic ordering. We determine the upper pressure limit for BC8 formation and reveal that hexagonal diamond transforms to BC8 faster than cubic diamond—an unexpected and experimentally testable prediction. We also identify a 𝑃⁢222 carbon phase that becomes competitive with diamond and simple cubic above 1.8 TPa, and we demonstrate that BC8 may be quenched to ambient conditions at moderate temperatures. Altogether, these results establish a general and transferable framework for resolving kinetic pathways in solid-solid phase transitions and provide physical insights into carbon's complex high-pressure landscape.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Recovery of Natural Gas Equipment Emissions into Gas Compression Engines for the Reduction of Potential Greenhouse Gas Emissions

Since the turn of the millennium, the United States (U.S.) oil and natural gas (ONG) industry has nearly doubled its natural gas production rate. As a result, the ONG industry has recently come under increasing scrutiny for its contributions to greenhouse gas (GHG) emissions. Consequently, various solutions to this problem have been proposed and formulated to reduce the impacts of GHG emissions on the environment. West Virginia University (WVU) have found it important to research the impacts of recovering vented gas streams into prime-mover engines. The U.S. Department of Energy (DOE) and National Energy Technology Laboratory (NETL) have granted WVU funding to research and develop a “Methane Mitigator” (M2) - a “Scalable Vent Mitigation Strategy to Simultaneously Reduce Methane Emissions and Fuel Consumption from the Compression Industry.” One of the main areas of interest for this research was the collection of emissions from natural gas equipment into a Caterpillar G3508J natural gas compression engine. The parameters being analyzed from the engine were brake-specific emissions and power output. The emissions sources considered for this research were pneumatic controllers (PCs), reciprocating compressor vents, and the engine’s open crankcase breather. The compressor vent and PC emissions were simulated using a mass flow controller (MFC) and flowed into the engine using two separate methods: (1) directly into the air intake, and (2) through a retrofitted closed crankcase ventilation system (CCV), serving as a buffer volume. The crankcase emissions were quantified without the CCV, and the impact on exhaust emissions from circulating the crankcase gases into the intake was measured. The simulated compressor vent and PC flows from the MFC had limited effect on the steady state operation of the engine and resulting performance. When the simulated flows were fed directly into the engine’s air intake, the changes within the engine’s continuous performance and emission parameters were larger but lasted for shorter durations. Conversely, when the simulated flows were fed into the CCV before entering the air intake, the changes in the engine’s performance and emission parameters were less pronounced for continuous analysis but lasted for longer durations. In either case, the continuous emission changes in both emissions and performance varied in size depending on the test scenario being run, but the cycle average changes in emissions and performance showed little impact overall compared to the engine’s baseline operation. As a result, the inclusion of a CCV shows a decrease in baseline carbon dioxide equivalent (CO2-eq.) engine emissions (from combined exhaust and open crankcase) of almost 4%. Likewise, the CCV inclusion reduced baseline total methane (CH4) from combined exhaust and open crankcase by upwards of 16%. These atmospheric emissions only decreased further with the inclusions of collected PC and compressor vent flows. The resulting changes in time-averaged rated exhaust behavior (or lack thereof) prove that the proposed M2 system could likely be deployed at sites with modern lean-burn natural gas engines as a viable option for reducing and eliminating potential GHG sources that would have otherwise been unutilized as energy sources.

03 NATURAL GAS↗
DOE OSTI2024

An efficient cre‐based workflow for genomic integration and expression of large biosynthetic pathways in Eubacterium limosum

Abstract Acetogenic Clostridia are obligate anaerobes that have emerged as promising microbes for the renewable production of biochemicals owing to their ability to efficiently metabolize sustainable single‐carbon feedstocks. Additionally, Clostridia are increasingly recognized for their biosynthetic potential, with recent discoveries of diverse secondary metabolites ranging from antibiotics to pigments to modulators of the human gut microbiota. Lack of efficient methods for genomic integration and expression of large heterologous DNA constructs remains a major challenge in studying biosynthesis in Clostridia and using them for metabolic engineering applications. To overcome this problem, we harnessed chassis‐independent recombinase‐assisted genome engineering (CRAGE) to develop a workflow for facile integration of large gene clusters (>10 kb) into the human gut acetogen Eubacterium limosum . We then integrated a non‐ribosomal peptide synthetase gene cluster from the gut anaerobe Clostridium leptum , which previously produced no detectable product in traditional heterologous hosts. Chromosomal expression in E. limosum without further optimization led to production of phevalin at 2.4 mg/L. These results further expand the molecular toolkit for a highly tractable member of the Clostridia, paving the way for sophisticated pathway engineering efforts, and highlighting the potential of E. limosum as a Clostridial chassis for exploration of anaerobic natural product biosynthesis.

Sanford, Patrick A.↗
DOE OSTI2024

CACTUS: Chemistry Agent Connecting Tool Usage to Science

Large language models (LLMs) have shown remarkable potential in various domains but often lack the ability to access and reason over domain-specific knowledge and tools. In this article, we introduce Chemistry Agent Connecting Tool-Usage to Science (CACTUS), an LLM-based agent that integrates existing cheminformatics tools to enable accurate and advanced reasoning and problem-solving in chemistry and molecular discovery. We evaluate the performance of CACTUS using a diverse set of open-source LLMs, including Gemma-7b, Falcon-7b, MPT-7b, Llama3-8b, and Mistral-7b, on a benchmark of thousands of chemistry questions. Our results demonstrate that CACTUS significantly outperforms baseline LLMs, with the Gemma-7b, Mistral-7b, and Llama3-8b models achieving the highest accuracy regardless of the prompting strategy used. Moreover, we explore the impact of domain-specific prompting and hardware configurations on model performance, highlighting the importance of prompt engineering and the potential for deploying smaller models on consumer-grade hardware without a significant loss in accuracy. By combining the cognitive capabilities of open-source LLMs with widely used domain-specific tools provided by RDKit, CACTUS can assist researchers in tasks such as molecular property prediction, similarity searching, and drug-likeness assessment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Prospects for Antiferromagnetic Spintronic Devices

This article examines recent advances in the field of antiferromagnetic spintronics from the perspective of potential device realization and applications. We discuss advances in the electrical control of antiferromagnetic order by current-induced spin–orbit torques, particularly in antiferromagnetic thin films interfaced with heavy metals. We also review possible scenarios for using voltage-controlled magnetic anisotropy as a more efficient mechanism to control antiferromagnetic order in thin films with perpendicular magnetic anisotropy. Next, we discuss the problem of electrical detection (i.e., readout) of antiferromagnetic order and highlight recent experimental advances in realizing anomalous Hall and tunneling magnetoresistance effects in thin films and tunnel junctions, respectively, which are based on noncollinear antiferromagnets. Understanding the domain structure and dynamics of antiferromagnetic materials is essential for engineering their properties for applications. For this reason, we then provide an overview of imaging techniques as well as micromagnetic simulation approaches for antiferromagnets. Finally, we present a perspective on potential applications of antiferromagnets for magnetic memory devices, terahertz sources, and detectors.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Contour deformations for nonholomorphic actions

We show how contour deformations may be used to control the sign problem of lattice Monte Carlo calculations with nonholomorphic Boltzmann factors. Such actions arise naturally in quantum mechanical scattering problems. The approach is demonstrated in conjunction with the holomorphic gradient flow. As our central example we compute the real-time evolution of a particle in a one-dimensional analog of the Yukawa potential. Published by the American Physical Society 2024

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

A Solution to the Hierarchy Problem with Non-Linear Quantum Mechanics

We argue that the hierarchy problem of the standard model of particle physics can be solved by adding a state-dependent term to the Higgs sector. We present an example of a scalar field with a Higgs-like potential with an additional term proportional to the expectation value of the squared Higgs field operator. We show that the mass can be parametrically lighter than the theory's energy-momentum cutoff without fine tuning. We find the Higgs mass can be technically natural, even with a Planck-scale cutoff. The simplest version of the theory may not be distinguishable from the standard model at colliders, but other versions might. In addition, some aspects of cosmological evolution can be different in this model, in some cases radically.

Kaplan, David E. [Johns Hopkins U.; Tokyo U., IPMU↗
DOE OSTI2025

McCormick envelopes in mixed-integer PDE-constrained optimization

McCormick envelopes are a standard tool for deriving convex relaxations of optimization problems that involve polynomial terms. Such McCormick relaxations provide lower bounds, for example, in branch-and-bound procedures for mixed-integer nonlinear programs but have not gained much attention in PDE-constrained optimization so far. This lack of attention may be due to the distributed nature of such problems, which on the one hand leads to infinitely many linear constraints (generally state constraints that may be difficult to handle) in addition to the state equation for a pointwise formulation of the McCormick envelopes and renders bound-tightening procedures that successively improve the resulting convex relaxations computationally intractable. We analyze McCormick envelopes for a model problem class that is governed by a semilinear PDE involving a bilinearity and integrality constraints. We approximate the nonlinearity and in turn the McCormick envelopes by averaging the involved terms over the cells of a partition of the computational domain on which the PDE is defined. This yields convex relaxations that underestimate the original problem up to an a priori error estimate that depends on the mesh size of the discretization. These approximate McCormick relaxations can be improved by means of an optimization-based bound-tightening procedure. We show that their minimizers converge to minimizers to a limit problem with a pointwise formulation of the McCormick envelopes when driving the mesh size to zero. We provide a computational example, for which we certify all of our imposed assumptions. The results point to both the potential of the methodology and the gaps in the research that need to be closed. Our methodology provides a framework first for obtaining pointwise underestimators for nonconvexities and second for approximating them with finitely many linear inequalities in an infinite-dimensional setting.

Approximations and Expansions↗
DOE OSTI2025

SympGNNs: Symplectic Graph Neural Networks for identifying high-dimensional Hamiltonian systems and node classification

Existing neural network models to learn Hamiltonian systems, such as SympNets, although accurate in low-dimensions, struggle to learn the correct dynamics for high-dimensional many-body systems. Herein, we introduce Symplectic Graph Neural Networks (SympGNNs) that can effectively handle system identification in high-dimensional Hamiltonian systems, as well as node classification. SympGNNs combine symplectic maps with permutation equivariance, a property of graph neural networks. Specifically, we propose two variants of SympGNNs: (i) G-SympGNN and (ii) LA-SympGNN, arising from different parameterizations of the kinetic and potential energy. We demonstrate the capabilities of SympGNN on two physical examples: a 40-particle coupled Harmonic oscillator, and a 2000-particle molecular dynamics simulation in a two-dimensional Lennard-Jones potential. Furthermore, we demonstrate the performance of SympGNN in the node classification task, achieving accuracy comparable to the state-of-the-art. Finally, we also empirically show that SympGNN can overcome the oversmoothing and heterophily problems, two key challenges in the field of graph neural networks.

Deep learning↗
DOE OSTI2026

Rheinheimera sp . T2C2 Bacterial Biofilm for Bioremediation of Cobalt(II)

Toxic metals, including cobalt, are often the cause of the contamination of rivers and lakes in mining regions. Heavy metal water pollution has been linked to numerous human health problems, prompting the need for environmental remediation. Existing techniques for removing heavy metals from water, such as chemical precipitation and filtration, produce toxic waste, are costly, or require high power consumption for pumping. Biosorption is a potential alternative strategy that is cost-effective and uses readily available and naturally produced biomass and living material to absorb pollutants. Engineering living materials, such as biofilms, which consist of living cells and a secreted polymer matrix, offer the potential to integrate toxin sensing, sequestration, and metabolism capabilities of cells to improve pollution remediation strategies. Alternative biofilm producing candidates need to be explored to implement these material capabilities. Previous biosorption studies have primarily used bacterial biofilms from known pathogens and/or generated toxic waste in the form of the absorbent material combined with the heavy metal. Here, we describe a recently isolated bacterium called Rheinheimera sp. T2C2 that forms biofilms with promising biosorption characteristics. T2C2 is an aquatic bacterium with low nutrient requirements and high biofilm production that is not known to be pathogenic. We demonstrate (1) the efficacy of Rheinheimera sp. T2C2 as a biosorbent for cobalt bioremediation; (2) how biosorption is altered by water conditions to establish the efficacy of this strategy in different environments; and (3) how the metal can be released from the biofilm for metal recycling. Our findings will provide a living materials strategy that overcomes the existing barriers for bioremediation and improves the health of ecosystems and humans through heavy metal removal and recycling.

Rheinheimera↗
DOE OSTI2026

Predicting Atomistic Transitions with Transformers

Accurate knowledge of the atomistic transition pathways in materials and material surfaces is crucial for many material science problems. However, conventional simulation techniques used to find these transitions are extremely computationally intensive. Even with large-scale, accelerated material simulations, the computational cost constrains the applicable domain in practice. Machine learning models, with the potential to learn the complex emergent behaviors governing atomistic transitions as a fast surrogate model, have great promise to predict transitions with a vastly reduced computational cost. Here, we demonstrate how transformers can be trained to predict atomistic transitions in nano-clusters. We show how we evaluate physical validity of the predictions and how a multitude of additional, different microstates can be generated by slightly varying the data provided to the model.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Perfect spinfluid: A divergence-type approach

We present a new formulation of nondissipative relativistic spin hydrodynamics that incorporates spin degrees of freedom into the divergence-type theory framework. Due to the divergence-type structure, it is straightforward to enforce nonlinear causality and symmetric hyperbolicity of the equations of motion, ensuring local well-posedness of the initial-value problem and stability of the theory. Furthermore, in a specific realization based on spin kinetic theory, we prove that the equations of motion remain nonlinearly causal and symmetric-hyperbolic to all orders in the spin potential, provided a specific thermodynamic constraint is satisfied. Here, this framework can be applied for numerical simulations to study the dynamics of spin-polarized fluids, such as the quark-gluon plasma in heavy-ion collisions.

Chirality↗
DOE OSTI2024

Aberration corrected RF flipper for high resolution neutron spectroscopy

Project Summary Company: Adelphi Technology, Inc. Title: Aberration-corrected High Frequency RF Flipper for High-Resolution Neutron Spectroscopy PI: Dr. Jay Theodore Cremer Topic: C55-11 Enhancement of Scattering Instrumentation Technology Used at Pulsed and Continuous Sources Subtopic: d. Other Statement of the problem or situation that is being addressed. The quest to understand heterogeneous and hierarchical materials is gathering momentum, as described in a 2015 report by the Basic Energy Sciences Advisory Committee on Challenges at the Frontiers of Matter and Energy. For the past 40 years a technique called neutron spin echo (NSE) has been used to probe molecular motions in such non-crystalline materials over time scales from 10’s of picoseconds to 100’s of nanoseconds. The method has provided unique information about the dynamics of soft heterogeneous materials, including confirmation of the de Gennes model of polymer reptation and quantitative measurement of bending constants of biologically relevant lipid membranes. However, scientists continue to clamor for even higher resolution than NSE can provide. Biomaterials, polymers, glasses, and artificially nanostructured materials all manifest slow molecular motions because of weak or competing interactions between subunits and are amenable to study with neutrons, provided sufficiently long dynamical correlation times can be achieved. All these materials have important applications to advanced technologies so understanding them is key to technological progress. General statement of how this problem is being addressed. We will address the need for high-resolution neutron spectroscopy by using a technique called Neutron Resonance Spin Echo (NRSE). While similar to NSE in many respects, this method has the potential to exceed the NSE capabilities, if 2 technical hurdles can be overcome. The major impediments to successful high-resolution NRSE are the availability of two technologies: a very high frequency, efficient, radiofrequency (rf) flipper for neutrons and a method to correct certain magnetic aberrations. Based on previous STTR support and follow-on research we have developed a suitable rf flipper and we have invented a method to correct the magnetic aberrations. Both technologies need refinement to make them suitable for implementation at a neutron source such as the Oak Ridge National Laboratory nuclear reactor. In this proposal we seek to perfect the two technologies and to combine them into a single, operationally convenient device. Commercial Applications and Other Benefits In view of the increasing demand for the unique scientific information that high resolution neutron spectroscopy can provide, we expect several major instrumentation upgrades at both U.S. and foreign neutron centers will require make use of the NRSE method over the coming decade, creating a market for the devices we will design. These components will enhance scientists’ abilities to probe the time dependence of density fluctuations in a wide range of hierarchical and heterogeneous materials many of which are vital to existing and future technologies. Key Words – Polarized Neutrons, Neutron Spin Echo, Neutron Scattering, advanced materials. Summary for Members of Congress Neutron beams are a powerful materials-science probe that provide unique information about the structure of matter. The proposed devices will accelerate scientific discoveries required to achieve national goals for new technological materials.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Electronic structure theory with molecular point group symmetries on quantum annealers

Quantum computation has the potential to revolutionize quantum chemistry through major speedups in computation times and an exponential reduction in computational resources. Here, we combine the symmetry-adapted Jordan–Wigner encoding based on the full Boolean symmetry group $\mathbb{Z}$$^{k}_{2}$ with our new implementation of the Xia–Bian–Kais (XBK) method for improving the efficiency of electronic structure theory calculations on quantum annealers, particularly by reducing the number of qubits needed to achieve the same accuracy. By providing a more extensive symmetry-adapted encoding (SAE) than previous work, we are able to simulate molecules larger than those previously reported that have been studied using methods developed for quantum annealers and without using an active space. We calculated the potential energy surfaces of H 2 , LiH, He 2 , H 2 O, O 2 , N 2 , Li 2 , F 2 , CO, BH 3 , NH 3 , and CH 4 , with the largest molecule in the STO-6G basis set requiring 16 qubits with our SAE, and compared them with full configuration interaction results. The application of SAE to the XBK method provides an exponential reduction in the size of the Hilbert space and scales well with the size of the problem. It does not introduce significant additional errors for even or large values of a key variational parameter that determines the number of ancilla qubits used in the XBK method’s Hamiltonian embedding, or for certain molecules such as He 2 and H 2 O. Here, we provide an explanation for this behavior and a recommendation on the usage of our method. In addition, we briefly discuss the potential of extracting electronic excited states from our method.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Quantum-centric supercomputing for materials science: A perspective on challenges and future directions

Computational models are an essential tool for the design, characterization, and discovery of novel materials. Computationally hard tasks in materials science stretch the limits of existing high-performance supercomputing centers, consuming much of their resources for simulation, analysis, and data processing. Quantum computing, on the other hand, is an emerging technology with the potential to accelerate many of the computational tasks needed for materials science. In order to do that, the quantum technology must interact with conventional high-performance computing in several ways: approximate results validation, identification of hard problems, and synergies in quantum-centric supercomputing. Here in this paper, we provide a perspective on how quantum-centric supercomputing can help address critical computational problems in materials science, the challenges to face in order to solve representative use cases, and new suggested directions.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Signature of Correlated Insulator in Electric Field Controlled Superlattice

On a two-dimensional crystal, a “superlattice” with nanometer-scale periodicity can be imposed to tune the Bloch electron spectrum, enabling novel physical properties inaccessible in the original crystal. While creating 2D superlattices by means of nanopatterned electric gates has been studied for band structure engineering in recent years, evidence of electron correlations-which drive many problems at the forefront of physics research-remains to be uncovered. Here, in this work, we demonstrate signatures of a correlated insulator phase in Bernal-stacked bilayer graphene modulated by a gate-defined superlattice potential, manifested as resistance peaks centered at integer multiples of single electron per superlattice unit cell carrier densities. The observation is consistent with the formation of a stack of flat low-energy bands due to the superlattice potential combined with inversion symmetry breaking. Our work paves the way to custom-designed superlattices for studying band structure engineering and strongly correlated electrons in 2D materials.

36 MATERIALS SCIENCE↗