Results for “PROPELLANT PROPERTY” — Page 13

NASA NTRS2008

The Lunar Polesitter

Here-to-fore, sailcraft mission and system studies have focused on sailcraft applications in support of NASA's science missions and, in a few studies, on the needs of other federal agencies such as the National Oceanic and Atmospheric Administration (NOAA) and Department of Defense (DoD). These studies have identified numerous promising applications for solar sails, leading NASA to support proposal efforts for three NASA New Millennium Program (NMP) flight demonstration opportunities (the Space Technology-5, -7, and -9 opportunities) as well as an extensive three-year ground development program in FY 2003-2005 sponsored by the NASA In-Space Propulsion Technology (ISPT) Program. What has not been done to date, however, is to investigate how the technology might also benefit the nation's (and NASA's) emerging interest in the Human Exploration Initiative (HEI). This paper reports on the first effort to address this shortfall in mission applications studies in support of HEI: the use of solar-sail-propelled Lunar Polesitter spacecraft which make use of the natural properties of the Earth-Moon L2 point and solar sail propulsion to enable their positioning near the Lunar poles to serve as communications relay stations. Suitably positioned, such spacecraft enable continuous communications to and from the Earth from any point on the lunar far side. The paper shows that a viable sailcraft system design exists permitting station-keeping of a Lunar Polesitter relay station at 40 Lunar radii from the Moon in the anti-Earth direction, displaced 6-8 Lunar radii below the Earth- Moon plane.

West, John L.↗

NASA NTRS2018

Discovery of Pulsation Dropout and Turn-on During the High State of the Accreting X-Ray Pulsar LMC X-4

Two Nuclear Spectroscopic Telescope Array (NuSTAR) observations of the luminous X-ray pulsar LMC X-4 in2015 October and November captured several bright accretion flares from this source, which has a long history of stable pulse and superorbital behavior. We present a timing analysis of these data in which we detect a rapid pulse "turn-on" in association with the accretion flares, during which the source reaches super-Eddington luminosities.Pulsations, which are normally seen from this source, are found to only occur for approximately one hour before and during the bright flares. Beyond one hour before and after the flares, we find pulsations to be weak or nonexistent, with fractional rms amplitudes of less than 0.05. At the onset of the flare, the pulse profiles exhibit a phase shift of 0.25 cycles that could be associated with a change in the emission geometry. This increase in pulse strength occurring well before the flare cannot be explained by the propeller effect, and potentially offers a connection between the magnetic properties of pulsars that accrete close to their Eddington limits and ultraluminous X-ray pulsars.

Brumback, Mckinley C.↗

NASA NTRS1962

Thermal and Criticality Analysis of the Plasma Core Reactor

Radiative heat transfer to the propellant and reactor criticality for a fissionable gaseous rocket engine are analyzed to determine their interdependence. The necessity for propellant thicknesses of approximately 1-3 m due to poor thermal absorption properties of hydrogen significantly affects reactor critical radius and mass. The two primary adverse effects are: (1) increased absorption in the reflector- moderator for a given reflector thickness and (2) poor utilization of thermal neutrons by the core due to the lower geometrical view factor of the core for the reflector walls. In fact, there is a minimum core radius at a particular propellant thickness which allows the system to “go” critical. Engine performance is limited primarily to two regions of operation: the first, a specific impulse of approximately 1550 sec at a thrust level of 2 x 10(exp 6) lb. and second, a specific impulse of approximately 2200 sec at a thrust level of 5.3 x 10(exp 6) lb.

Rocket engine↗

NASA NTRS2015

Fracture Toughness, Mechanical Property, And Chemical Characterization Of A Critical Modification To The NASA SLS Solid Booster Internal Material System

A modified propellant-liner-insulation (PLI) bondline in the Space Launch System (SLS) solid rocket booster required characterization for flight certification. The chemical changes to the PLI bondline and the required additional processing have been correlated to mechanical responses of the materials across the bondline. Mechanical properties testing and analyses included fracture toughness, tensile, and shear tests. Chemical properties testing and analyses included Fourier transform infrared (FTIR) spectroscopy, cross-link density, high-performance liquid chromatography (HPLC), gas chromatography (GC), gel permeation chromatography (GPC), and wave dispersion X-ray fluorescence (WDXRF). The testing identified the presence of the expected new materials and found the functional bondline performance of the new PLI system was not significantly changed from the old system.

Pancoast, Justin↗

NASA NTRSDate not supplied

Results from the Radio Frequency Mass Gauge Technology Demonstration on the Intuitive Machines Nova-C Lunar Lander

A cryogenic propellant mass gauge known as the Radio Frequency Mass Gauge (RFMG) was integrated into the Intuitive Machines (IM) Nova-C lunar lander and provided an estimate of the liquid oxygen and liquid methane mass in the lander propellant tanks throughout the IM-1 mission, including during microgravity coast phases. An RFMG electronics controller was used to measure and record the spectrum of the RF signal reflected from an antenna sensor in each tank over the frequency range 100 to 1,300 MHz. The RF spectrum of each of the tanks is unique and is sensitive to the index of refraction of the propellants and the spatial distribution of the liquid within the tanks. Electromagnetic simulation software was used to simulate the antenna response spectra for a given tank geometry, fluid properties, and liquid–vapor configurations within the tank. Over 10,000 antenna response simulations were completed for each propellant tank prior to the IM-1 mission and represented various volumetric fill levels and fluid configurations. The simulated spectra served as a database against which measured tank spectra were compared. For analysis, a spectral matching algorithm was used to find the best match between measured and simulated spectra, and the gauged mass was calculated from the most highly correlated fluid mass simulations. RFMG measurements were recorded during tank loading on the launch pad and during translunar coast, lunar orbit insertion, low lunar orbit, powered descent to the lunar surface, and postlanding on the Moon. This paper describes the RF and fluid simulations, the RFMG measurements and analysis of spectral data, the RFMG instrument, and the gauged results throughout all phases of the IM-1 mission.

lunar lander↗

NASA NTRSDate not supplied

Results from the Radio Frequency Mass Gauge Technology Demonstration on the Intuitive Machines Nova-C Lunar Lander

A cryogenic propellant mass gauge known as the Radio Frequency Mass Gauge (RFMG) was integrated into the Intuitive Machines (IM) Nova-C lunar lander and provided an estimate of the liquid oxygen and liquid methane mass in the lander propellant tanks throughout the IM-1 mission, including during microgravity coast phases. An RFMG electronics controller was used to measure and record the spectrum of the RF signal reflected from an antenna sensor in each tank over the frequency range 100 to 1,300 MHz. The RF spectrum of each of the tanks is unique and is sensitive to the index of refraction of the propellants and the spatial distribution of the liquid within the tanks. Electromagnetic simulation software was used to simulate the antenna response spectra for a given tank geometry, fluid properties, and liquid–vapor configurations within the tank. Over 10,000 antenna response simulations were completed for each propellant tank prior to the IM-1 mission and represented various volumetric fill levels and fluid configurations. The simulated spectra served as a database against which measured tank spectra were compared. For analysis, a spectral matching algorithm was used to find the best match between measured and simulated spectra, and the gauged mass was calculated from the most highly correlated fluid mass simulations. RFMG measurements were recorded during tank loading on the launch pad and during translunar coast, lunar orbit insertion, low lunar orbit, powered descent to the lunar surface, and postlanding on the Moon. This paper describes the RF and fluid simulations, the RFMG measurements and analysis of spectral data, the RFMG instrument, and the gauged results throughout all phases of the IM-1 mission.

lunar lander↗

NASA NTRS1978

Standard Molded Composite Rocket Pyrogen Igniter - A progress report

The pyrogen igniter has the function to furnish a controlled, high temperature, high pressure gas to ignite solid propellant surfaces in a rocket motor. Present pyrogens consist of numerous inert components. The Standard Molded Pyrogen Igniter (SMPI) consists of three basic parts, a cap with several integrally molded features, an ignition pellet retainer plate, and a tube with additional integrally molded features. A description is presented of an investigation which indicates that the SMPI concept is a viable approach to the design and manufacture of pyrogen igniters for solid propellant rocket motors. For some applications, combining the structural and thermal properties of molded composites can result in the manufacture of lighter assemblies at considerable cost reduction. It is demonstrated that high strength, thin walled tubes with high length to diameter ratios can be fabricated from reinforced plastic molding compound using the displacement compression process.

Lucy, M. H.↗

NASA NTRS1992

Trajectory design and navigation analysis for Cargo Transfer Vehicle proximity operations

The paper documents an investigation of alternative (or off-nominal) final approach trajectories and terminal guidance algorithms for Cargo Transfer Vehicle (CTV) automated rendezvous and proximity operation in the vicinity of Space Station Freedom (SSF). Ten candidate trajectory designs, representing a survey of all approaches that reasonably satisfy the mission constraints, are compared qualitatively and quantitatively. It is shown that several fundamentally different types of approach strategies are feasible in the CTV application and enjoy more favorable passive collision avoidance and plume impingement properties than the nominal. They are, however, generally more costly in propellant. The extent to which an alternative approach is more costly is determined largely by the abort (or specifically the 'hold' or 'wave-off') requirements. These approach techniques are verified in a software simulation using a parametrically defined candidate navigation system, and proximity sensor accuracy requirements are derived.

Marsh, S. M.↗

NASA NTRS1995

Alternate assembly sequence databook for the Tier 2 Bus-1 option of the International Space Station

The JSC International Space Station program office requested that SSB prepare a databook to document the alternate space station assembly sequence known as Tier 2, which assumes that the Russian participation has been eliminated and that the functions that were supplied by the Russians (propulsion, resupply, initial attitude control, communications, etc.) are now supplied by the U.S. Tier 2 utilizes the Lockheed Bus-l to replace much of the missing Russian functionality. The space station at each stage of its buildup during the Tier 2 assembly sequence is characterized in terms of of properties, functionality, resource balances, operations, logistics, attitude control, microgravity environment and propellant usage. The assembly sequence as analyzed was defined by JSC as a first iteration, with subsequent iterations required to address some of the issues that the analysis in this databook identified. Several significant issues were identified, including: less than desirable orbit lifetimes, shortage of EVA, large flight attitudes, poor microgravity environments, and reboost propellant shortages. Many of these issues can be resolved but at the cost of possible baseline modifications and revisions in the proposed Tier 2 assembly sequence.

Brewer, L. M.↗

NASA NTRS2007

Simulating Flights of Future Launch Vehicles and Spacecraft

Marshall Aerospace Vehicle Representation in C (MAVERIC) is a computer program for generic, low-to-high-fidelity simulation of the flight(s) of one or more launch vehicle(s) or spacecraft. MAVERIC is designed to accommodate multi-staged vehicles, powered serially or in parallel, with multiple engines, tanks, and cargo elements. Engines can be of jet or conventional rocket types, using either liquid or solid propellants. MAVERIC includes generic subsystem software models for propulsion systems, mass properties, reaction control systems, aerodynamic properties, guidance systems, and navigation systems. Simulations can be started at points other than liftoff. Also included are guidance-system software models that accommodate the ascent, orbit, coasting, deorbiting, entry, terminal-area-energy-management, approach, and landing phases of flight. Options to use different wind profiles and atmospheres are included. A Monte Carlo capability is provided for modeling dispersions associated with atmospheric effects (including winds), propulsion, navigation, aerodynamics, and mass properties. Failures of engines and other subsystems can be modeled. The program is written in the C programming language, which makes it possible for the program to have high degrees of modularity, reusability, and maintainability, thereby also facilitating modification for modeling new vehicles.

McCarter, James W.↗

NASA NTRS2019

Converging-Diverging Nozzle Thruster Code for Nuclear or Chemical Rocket Performance Computations

This report describes development of a variable area ratio C-D nozzle numerical computational code "THRST", applicable to the evaluation of nuclear or chemical rocket performance. The propellant for the nuclear rockets is para-hydrogen with gas properties supplied by a sub-routine, while properties for chemical thrusters need to be user input. Detailed documentation of input and output variables and sample output listings enable the report to function as a "User Manual".

Juhasz, Albert J.↗

NASA NTRSDate not supplied

Modeling Validation and Its Design Relevance for NTP Fuel Elements

The development of Nuclear Thermal Propulsion engines depends heavily on modeling and simulation of a number of disciplines—neutronic / fluid / thermal / structural are only a start. Further, rockets involve extreme conditions, particularly high material temperatures in the nuclear fuel. This paper considers validation of the underling physical models and codes and how their accuracy influences several design challenges. Several issues are identified, where models, material data, could enable design solutions. In particular, thermal and CTE mismatch stresses are a concern, and stress predictions would benefit from improved mechanical property data at high temperatures. Nuclear inter-element heating causes propellant flow maldistribution and performance risks, but a simple model provides insights. High temperature chemical diffusion should be modeled to understand fuel element mass loss.

Nuclear Propulsion↗

NASA NTRSDate not supplied

Modeling Validation and Its Design Relevance for NTP Fuel Elements

The development of Nuclear Thermal Propulsion engines depends heavily on modeling and simulation of a number of disciplines—neutronic / fluid / thermal / structural are only a start. Further, rockets involve extreme conditions, particularly high material temperatures in the nuclear fuel. This paper considers validation of the underling physical models and codes and how their accuracy influences several design challenges. Several issues are identified, where models, material data, could enable design solutions. In particular, thermal and CTE mismatch stresses are a concern, and stress predictions would benefit from improved mechanical property data at high temperatures. Nuclear inter-element heating causes propellant flow maldistribution and performance risks, but a simple model provides insights. High temperature chemical diffusion should be modeled to understand fuel element mass loss.

Nuclear Propulsion↗

NASA NTRS1986

Stress concentration investigations using NASTRAN

Parametic investigations are performed using several two dimensional finite element formulations to determine their suitability for use in predicting extremum stresses in marine propellers. Comparisons are made of two NASTRAN elements (CTRIM6 and CTRAIA2) wherein elasticity properties have been modified to yield plane strain results. The accuracy of the elements is investigated by comparing finite element stress predictions with experimentally determined stresses in two classical cases: (1) tension in a flat plate with a circular hole; and (2) a filleted flat bar subjected to in-plane bending. The CTRIA2 element is found to provide good results. The displacement field from a three dimensional finite element model of a representative marine propeller is used as the boundary condition for the two dimensional plane strain investigations of stresses in the propeller blade and fillet. Stress predictions from the three dimensional analysis are compared with those from the two dimensional models. The validity of the plane strain modifications to the NASTRAN element is checked by comparing the modified CTRIA2 element stress predictions with those of the ABAQUS plane strain element, CPE4.

Gillcrist, M. C.↗

NASA NTRSDate not supplied

Fracture Mechanics Testing of Titanium 6AL-4V in LMP-103S Propellant

Propellant tank safe-life analysis is a spacecraft propulsion subsystem Launch Range processing requirement. The material property inputs for the safe-life analysis include the stress intensity factor for environment-assisted cracking (KEAC). The KEAC for titanium alloy Ti 6Al-4V in LMP-103S propellant was determined experimentally using an innovative test method following ASTM E1681, Standard Test Method for Determining Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials. This effort was a collaboration between NASA Goddard Space Flight Center and NASA Kennedy Space Center to expose the test specimens in the propellant, while loaded in the test fixtures, for 1000- hour (42 days) at 50°C. Two test rounds have been completed to date; 1) testing mechanically loaded specimens but without propellant and 2) testing mechanically loaded specimens wetted with LMP-103S propellant. The dry test was to evaluate the crack growth without exposure to the LMP-103S propellant, and further assess the un-wetted stress intensity factor for the full 1000-hour duration. The second round of testing included the propellant soak for the requisite 1000- hour at 50°C. Current results show that the threshold intensity factor for environment-assisted cracking (exposed to LMP103S) is 22.5 ksi√in for the bulk material and 36. 2 ksi√in for the weld material. A generic ‘candidate’ tank geometry and material thickness is developed for a damage tolerance of known surface cracks below the nondestructive inspection technique detection limit. Evaluations with and without the use of a threshold intensity factor for environment-assisted cracking is performed for the required 4x propellant tank service life using the software tool NASGRO. SP2024_00239

Green propulsion↗

NASA NTRS2018

Demonstration of a 600 Watt Hybrid Iodine-Xenon Electric Propulsion System

This paper reviews recent iodine compatible electric propulsion technologies evaluated at the NASA Glenn Research Center. The work culminated in a 1,174-hour hybrid iodine-xenon propulsion system durability demonstration (iodine fed thruster with xenon fed cathode). The test demonstrated that (i) a Hall-effect thruster operates with nearly identical performance whether employing iodine or xenon propellant, (ii) careful selection of propulsion system materials and coatings can result in durable iodine-compatible hardware, and (iii) implementation of appropriate facility improvements and procedures can limit negative impacts of iodine on test hardware and ground support equipment. The work was motivated by advancements in capability of very dense small-spacecraft (<500 kg), but spacecraft still lacking very dense in-space propulsion to provide the large delta-v capabilities (3 to 10 km/s) required for many high-value NASA exploration and science missions. Volume limitations of small-spacecraft not only require dense propulsion systems, but more so dense propellants. NASA identifies xenon and iodine as having both favorable storage densities and propulsive properties to enable many NASA small-spacecraft mission scenarios. While xenon is inert and well-proven in spaceflight applications, iodine has triple the storage density of xenon and stores at low pressures, permitting use of conformal tank designs. Unlike xenon, iodine does raise concerns related to its reactivity with most materials, potential spacecraft-propellant interactions, impact on ground test facilities, and challenges to acceptance test iodine propulsion systems prior to flight. This work begins to address these challenges. This work was conducted under the Advanced In-Space Propulsion (AISP) project funded through the Game Changing Development (GCD) program within NASA's Science Technology Mission Directorate (STMD).

Benavides, G. F.↗

NASA NTRS2019

Analyses and Methods of Solid Rocket Motor Material Irradiation at Marshall Space Flight Center

The search for life on other worlds is among humanity’s greatest endeavors. Europa represents the most probable location to discover extraterrestrial life in our solar system, owing to its surface composition of ice covering a liquid water ocean, warmed by the tidal forces of its orbit around Jupiter. Unfortunately, the Jovian system hosts the most intense planetary radiation environment in the solar system due to the charged particles, namely electrons and protons, trapped by Jupiter’s immense magnetic field. Any mission that attempts to approach or land on Europa must survive this radiation environment [Hand et al, 2017]. Radiation effects were identified as a priority risk to the successful development of a de-orbit stage and solid rocket motor (SRM) early in the Europa Lander De-orbit Stage project concept. The effects of primary concern tend to occur very near the outer surface of the SRM. The charged particles deposit their energy quickly and are mostly stopped in the outer metallic case, but a significant portion of radiation penetrates through the bondline and outer propellant regions. High doses of ionizing radiation are known to cause significant changes to mechanical properties of many materials, especially polymers. For polymers such as the rubber-like materials (elastomers) in a solid rocket motor, the primary damage mechanism is known as cross-linking, in which ionization causes the restructuring of the matrix of long polymer chains. Ionization energy breaks the long polymer chains and allows formation of new cross-linked bonding sites. This hardens and often strengthens the polymer, but at the cost of decreased flexibility (or modulus). Propellant, insulation, liner, and pyrotechnic materials were identified as higher risk items, and so were irradiated at Marshall Space Flight Center (MSFC) for investigation of changes in mechanical and ballistic properties. This process required significant levels of analysis to evaluate how the radiation environment evolves within the spacecraft during the mission, and also to evaluate how dose is delivered into test articles within the irradiating facilities.

Caffrey, Jarvis↗

NASA NTRS2019

Analyses and Methods of Solid Rocket Motor Material Irradiation at Marshall Space Flight Center

The search for life on other worlds is among humanity’s greatest endeavors. Europa represents the most probable location to discover extraterrestrial life in our solar system, owing to its surface composition of ice covering a liquid water ocean, warmed by the tidal forces of its orbit around Jupiter. Unfortunately, the Jovian system hosts the most intense planetary radiation environment in the solar system due to the charged particles, namely electrons and protons, trapped by Jupiter’s immense magnetic field. Any mission that attempts to approach or land on Europa must survive this radiation environment [Hand et al, 2017]. Radiation effects were identified as a priority risk to the successful development of a de-orbit stage and solid rocket motor (SRM) early in the Europa Lander De-orbit Stage project concept. The effects of primary concern tend to occur very near the outer surface of the SRM. The charged particles deposit their energy quickly and are mostly stopped in the outer metallic case, but a significant portion of radiation penetrates through the bondline and outer propellant regions. High doses of ionizing radiation are known to cause significant changes to mechanical properties of many materials, especially polymers. For polymers such as the rubber-like materials (elastomers) in a solid rocket motor, the primary damage mechanism is known as cross-linking, in which ionization causes the restructuring of the matrix of long polymer chains. Ionization energy breaks the long polymer chains and allows formation of new cross-linked bonding sites. This hardens and often strengthens the polymer, but at the cost of decreased flexibility (or modulus). Propellant, insulation, liner, and pyrotechnic materials were identified as higher risk items, and so were irradiated at Marshall Space Flight Center (MSFC) for investigation of changes in mechanical and ballistic properties. This process required significant levels of analysis to evaluate how the radiation environment evolves within the spacecraft during the mission, and also to evaluate how dose is delivered into test articles within the irradiating facilities.

Caffrey, Jarvis↗