Search NASA⌕ Search

SEARCH · Search NASA

Results for “Padding”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

STS-37: TCDT Pad B Atlantis GRO (3 of 3)

Live footage shows some beautiful panoramic views of STS-37 on the pad. Scenes include the narration of simulated auto sequence start, engine start, engine firing and cut-off. Also shown is the crew emergency egress procedure. This is tape 3 of 3. Tape 1 has a report # of NONP-NASA-VT-2000013416, and tape 2 has a report # of NONP-NASA-VT-2000013417.

Source record↗

STS-37: TCDT Pad B Atlantis GRO (2 of 3)

Live footage shows the remaining two crewmembers of STS-37, Mission Specialists Jerry L. Ross, and Jay Apt, entering the White Room, putting on their life preservation vest, and then entering the launch vehicle. Video playbacks, of the crew during the earlier stage of the Terminal Countdown and Demonstration Test, and the processing of the primary payload (Gamma Ray Observatory) are shown. Scenes showing the arrival of Ross at Kennedy Space Center in the T-38 aircraft, the crew on the launch complex during familiarization activities, and training with the M113 vehicle are presented. Also shown are some beautiful panoramic views of the shuttle on the pad. This is tape 2 of 3. Tape 1 has a report # of NONP-NASA-VT-2000013416, and tape 3 has a report # of NONP-NASA-VT-2000013418.

Source record↗

STS-42 Discovery Rollout to Pad A

Footage is shown of the slow rollout of Discovery onto pad A. Different close-up and panoramic shots of the orbiter are also shown.

Source record↗

STS-38 Rollout to Pad A

Footage is shown of the slow rollout of Atlantis on pad A. Different close-up and panoramic shots of the orbiter are shown against a backdrop of the sunset.

Source record↗

STS-54 TDRS-F in Cargo Bay at Pad B

Footage shows close-up shots of the Tracking and Data Relay Satellite (TDRS) in the Endeavour Orbiter's cargo bay at Launch Pad B.

Source record↗

Flight-Simulated Launch-Pad-Abort-to-Landing Maneuvers for a Lifting Body

The results of an in-flight investigation of the feasibility of conducting a successful landing following a launch-pad abort of a vertically-launched lifting body are presented. The study attempted to duplicate the abort-to-land-ing trajectory from the point of apogee through final flare and included the steep glide and a required high-speed, low-altitude turn to the runway heading. The steep glide was flown by reference to ground-provided guidance. The low-altitude turn was flown visually with a reduced field- of-view duplicating that of the simulated lifting body. Results from the in-flight experiment are shown to agree with ground-based simulation results; however, these tests should not be regarded as a definitive due to performance and control law dissimilarities between the two vehicles.

Jackson, E. Bruce↗

STS-114: Discovery TCDT Flight Crew Test Media Event at Pad 39-B

The STS-114 Space Shuttle Discovery Terminal Countdown Demonstration Test (TCDT) flight crew is shown at Pad 39-B. Eileen Collins, Commander introduces the astronauts. Andrew Thomas, mission specialist talks about his primary responsibility of performing boom inspections, Wendy Lawrence, Mission Specialist 4 (MS4) describes her role as the robotic arm operator supporting Extravehicular Activities (EVA), Stephen Robinson, Mission Specialist 3 (MS3) talks about his role as flight engineer, Charlie Camarda, Mission Specialist 5 (MS5) says that his duties are to perform boom operations, transfer operations from the space shuttle to the International Space Station and spacecraft rendezvous. Soichi Noguchi, Mission Specialist 1 (MS1) from JAXA, introduces himself as Extravehicular Activity 1 (EVA1), and Jim Kelley, Pilot will operate the robotic arm and perform pilot duties. Questions from the news media about the safety of the external tank, going to the International Space Station and returning, EVA training, and thoughts about the Space Shuttle Columbia crew are answered.

Source record↗

Analysis of Compression Pad Cavities for the Orion Heatshield

Current results of a program for analysis of the compression pad cavities on the Orion heatshield are reviewed. The program was supported by experimental tests, engineering modeling, and applied computations with an emphasis on the latter presented in this paper. The computational tools and approach are described along with calculated results for wind tunnel and flight conditions. Correlations of the computed results are shown which can produce a credible prediction of heating augmentation due to cavity disturbances. The models developed for use in preliminary design of the Orion heatshield are presented.

Thompson, Richard A.↗

Single-Point Attachment Wind Damper for Launch Vehicle On-Pad Motion

A single-point-attachment wind-damper device is proposed to reduce on-pad motion of a cylindrical launch vehicle. The device is uniquely designed to attach at only one location along the vehicle and capable of damping out wind gusts from any lateral direction. The only source of damping is from two viscous dampers in the device. The effectiveness of the damper design in reducing vehicle displacements is determined from transient analysis results using an Ares I-X launch vehicle. Combinations of different spring stiffnesses and damping are used to show how the vehicle's displacement response is significantly reduced during a wind gust.

Hrinda, Glenn A.↗

The Range Safety Debris Catalog Analysis in Preparation for the Pad Abort One Flight Test

The Pad Abort One flight test of the Orion Abort Flight Test Program is currently under development with the goal of demonstrating the capability of the Launch Abort System. In the event of a launch failure, this system will propel the Crew Exploration Vehicle to safety. An essential component of this flight test is range safety, which ensures the security of range assets and personnel. A debris catalog analysis was done as part of a range safety data package delivered to the White Sands Missile Range in New Mexico where the test will be conducted. The analysis discusses the consequences of an overpressurization of the Abort Motor. The resulting structural failure was assumed to create a debris field of vehicle fragments that could potentially pose a hazard to the range. A statistical model was used to assemble the debris catalog of potential propellant fragments. Then, a thermodynamic, energy balance model was applied to the system in order to determine the imparted velocity to these propellant fragments. This analysis was conducted at four points along the flight trajectory to better understand the failure consequences over the entire flight. The methods used to perform this analysis are outlined in detail and the corresponding results are presented and discussed.

Kutty, Prasad M.↗