Search NASA⌕ Search

SEARCH · Search NASA

Results for “Parameters optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Classical optimization with imaginary-time block encoding on quantum computers: The MaxCut problem

Optimization problems in finance, physics, and computer science are typically very hard to tackle in classical computing; quantum computing could help speed up computations and provide efficient methods for tackling large problems. Typically, to treat a problem with a quantum computer, the optimal solution is cast as the ground state of a diagonal Hamiltonian. Here, we develop a method, called imaginary-time evolution block encoding (ITE-BE), based on a recent imaginary-time algorithm, which requires no variational parameter optimization, as all parameters can be derived analytically from the target Hamiltonian. We also demonstrate that our method can be successfully combined with other quantum algorithms such as the quantum approximate optimization algorithm (QAOA). For illustration, here we study the MaxCut problem. We find that the QAOA ansatz increases the postselection success of ITE-BE, and shallow QAOA circuits, when boosted with ITE-BE, achieve better performance than deeper QAOA circuits. For the special case of the transverse initial state, we adapt our block-encoding scheme to allow for a deterministic application of the first layer of the circuit.

Zhong, Dawei [University of Southern California, L↗
DOE OSTI2024

Impact of the Exciter and Governor Parameters on Forced Oscillations

In recent years, the frequency of forced oscillation events due to control system malfunctions or improper parameter settings has increased. Tuning the parameters of exciters and governor models is crucial for maintaining power system stability. Traditional simulation studies typically involve small transient disturbances or step changes to find optimal parameter sets, but existing optimization algorithms often fall short in fine-tuning for forced oscillations. Identifying the sensitive parameters within these control models is essential for ensuring stability during large, sustained disturbances. This study focuses on identifying these critical exciter and governor model parameters by analyzing their influence on sustained forced oscillations. Using Kundur’s two-area system, we analyze common exciter models such as SCRX, ESST1A, and AC7B, along with governor models like GAST, HYGOV, and GGOV1, utilizing PSS®E software version 34. Sustained forced oscillations are injected at generator-1 of area-1, with individual parameter changes dynamically simulated. By considering a local oscillation frequency of 1.4 Hz and an inter-area oscillation mode of 0.25 Hz, we analyze the impact of each parameter change on the magnitude and frequency of forced oscillations as well as on active and reactive power outputs. This novel approach highlights the most influential parameters of each tested model—such as exciter, governor, and turbine gains, as well as time constant parameters—on the impact of forced oscillations. Based on our findings, the sensitive parameters of each tested model are ranked. These would provide valuable insights for industry operators to fine-tune control settings during oscillation events, ultimately enhancing system stability.

42 ENGINEERING↗
DOE OSTI2025

A high-throughput approach for statistical process optimization in Laser Powder Bed Fusion

Process variability is inherent in metal additive manufacturing (AM). However, it is often overlooked in process optimization frameworks, constraining the understanding of process uncertainties and their influence on parameter selection. To address this, we present an integrated framework that combines high-throughput single-track experiments, GAN-based melt pool geometry extraction, robust statistical and machine learning modeling, and uncertainty-quantified process mapping. Process variability is characterized through single-track melt pool behaviors, and its influence on defect formation is systematically quantified to enable statistically guided process parameter optimization. This approach is demonstrated on Laser Powder Bed Fusion (L-PBF) of stainless steel 316L, effectively capturing the interplay between process parameters, melt pool variability, and defect probability. By integrating uncertainty quantification into process optimization, this study provides a structured methodology for addressing variability challenges in AM quality control, ultimately contributing to enhanced manufacturing reliability.

Laser Powder Bed Fusion↗
DOE OSTI2024

Ion-chain sympathetic cooling and gate dynamics

Sympathetic cooling is a technique often employed to mitigate motional heating in trapped-ion quantum computers. However, choosing system parameters such as number of coolants and cooling duty cycle for optimal gate performance requires evaluating trade-offs between motional errors and other slower errors such as qubit dephasing. The optimal parameters depend on cooling power, heating rate, and ion spacing in a particular system. In this study, we aim to analyze best practices for sympathetic cooling of long chains of trapped ions using analytical and computational methods. We use a case study to show that optimal cooling performance is achieved when coolants are placed at the center of the chain and provide a perturbative upper bound on the cooling limit of a mode given a particular set of cooling parameters. In addition, using computational tools, we analyze the trade-off between the number of coolant ions in a chain and the center-of-mass mode heating rate. We also show that cooling as often as possible when running a circuit is optimal when the qubit coherence time is otherwise long. These results provide a roadmap for how to choose sympathetic cooling parameters to maximize circuit performance in trapped-ion quantum computers using long chains of ions.

Cooling & trapping↗
NASA NTRS1974

Optimization of self-acting herringbone-grooved journal bearings for maximum stability

Groove parameters were determined to maximize the stability of herringbone-grooved journal bearings. Parameters optimized were groove depth, width, length, and angle. Optimization was performed by using a small-eccentricity, infinite-groove analysis in conjunction with a previously developed Newton-Raphson procedure for bearings with the smooth member rotating or with the grooved member rotating at low compressibility numbers, and a newly developed vector technique for bearings with the grooved member rotating at high compressibility numbers. The design curves in this report enable one to choose the optimum bearing for a wide range of operating conditions. Compared with bearings optimized to maximize load capacity, bearings optimized for stability allow a thousandfold increase in bearing-supported mass in some cases before onset of instability, and lose no more than 77 percent of their load capacity in any case studied. Stability is much greater when the grooved member rotates.

Fleming, D. P.↗
NASA NTRS1994

The sensitivity to parametric variation in direct minimization techniques

Solutions of some objective analysis techniques are known to depend upon the subjective values of internal parameters. The change in the solution per change in the parameter is the sensitivity. Parameters with low sensitivity can be varied with large increments during preliminary searches for near-optimal parameter values. Only terms with high sensitivity must be thoroughly investigated once the parameters are determined to be close to optimal. Both absolute and relative sensitivities are discussed and a sensitivity-based definition of the solution uncertainty is proposed. The sensitivity of direct minimization analysis to parametric variation is evaluated using a set of 'response functions' that characterize different aspects of the solution. It is shown that solutions of direct minimization techniques have low absolute sensitivity. Two examples are used to illustrate the usefulness of the technique. Both involved measurements of air-sea quantities (e.g., wind stress and latent heat flux) from a variety of data sources using a direct minimization technique. The examples demonstrate that sensitivity analysis is capable of quantifying regional sensitivities as well as indicating the magnitude and relationship between the various parameters.

Meyers, S. D.↗
NASA NTRS1989

Optimizing conceptual aircraft designs for minimum life cycle cost

A life cycle cost (LCC) module has been added to the FLight Optimization System (FLOPS), allowing the additional optimization variables of life cycle cost, direct operating cost, and acquisition cost. Extensive use of the methodology on short-, medium-, and medium-to-long range aircraft has demonstrated that the system works well. Results from the study show that optimization parameter has a definite effect on the aircraft, and that optimizing an aircraft for minimum LCC results in a different airplane than when optimizing for minimum take-off gross weight (TOGW), fuel burned, direct operation cost (DOC), or acquisition cost. Additionally, the economic assumptions can have a strong impact on the configurations optimized for minimum LCC or DOC. Also, results show that advanced technology can be worthwhile, even if it results in higher manufacturing and operating costs. Examining the number of engines a configuration should have demonstrated a real payoff of including life cycle cost in the conceptual design process: the minimum TOGW of fuel aircraft did not always have the lowest life cycle cost when considering the number of engines.

Johnson, Vicki S.↗
NASA NTRS1982

Nuclear electric propulsion mission to Neptune

A nuclear electric propulsion (NEP) mission to Neptune is studied. Results of trajectory and propulsion parameter optimization are presented which lead to a selection of key electric propulsion system parameters. Spiral earth escape and spiral capture modes are assumed in the optimization studies. Flight time vs payload for Space Transportation System (STS)/Centaur injection and Triton-aided orbit capture at Neptune are also briefly investigated as methods of improving mission performance. Radiation effects of the earth spiral phase are discussed. The effects of NEP technology on science payloads and mission and system designs are evaluated. NEP is shown to be a very flexible and high performing propulsion technology.

Nock, K. T.↗
DOE OSTI2020

Dynamic Model Reduction for Large-Scale Power Systems Using Wide-Area Measurements

To perform faster than the real-time dynamic simulation of large-scale power systems, it is necessary to reduce the simulated system size by using equivalents for surrounding areas of the study area, and existing dynamic model reduction approach could provide the needed structure of the reduced area. However, further parameter optimization is required to achieve the desired accuracy. In this paper, a particle swarm optimization (PSO) based approach is used to solve the above problem. Parameters for the individual dynamic elements in the reduced system are calibrated repeatedly until the wide-area measurements of the reduced model and the original model are very similar to each other with satisfactory accuracy. Results indicate that after optimization, the dynamic response of the reduced model matches better with that of the original one than using existing methods. Under both the generator-trip event and the bus-fault event, the reduced model has a higher frequency match and less power mismatch.

42 ENGINEERING↗
DOE OSTI2022

ReNew100: Reliable Power System Operation with 100% Renewable Generation

The ReNew100 project has developed and demonstrated an operator support system (OSS) to operate power systems with 100% renewable power generation from inverter-based resources (IBRs) like wind and solar that significantly reduces the risk of widespread power outages in a simulated operational environment at Technology Readiness Level (TRL) 6. The OSS achieves resilient operation for power systems under changing operation modes including varying combinations of conventional and renewable generation, including cases with 100% renewable generation from wind and solar IBRs. The OSS continuously monitors the N-1 security of the power system, which refers to the ability of the power systems to survive single outages of power system elements, like the loss of a generator or a power line, without causing widespread power outages beyond those expected and planned for. If the OSS identifies that the system is not N-1 secure, an automatic Controller Parameter Optimization (CoPO) developed within Renew100 is activated to optimize the N-1 security of the system by tuning controller parameters within different assets like batteries, wind, and solar plants. The core innovation of ReNew100 is the development of this CoPO as well as the demonstration of the OSS for a real-time simulation of the Hawai'i Island power system. Moreover, Renew100 has developed new model calibration techniques for dynamic power system models and demonstrated them for Hawai'i Island.

24 POWER TRANSMISSION AND DISTRIBUTION↗
NASA NTRS1974

Application of modern control theory to scheduling and path-stretching maneuvers of aircraft in the near terminal area

A design concept of the dynamic control of aircraft in the near terminal area is discussed. An arbitrary set of nominal air routes, with possible multiple merging points, all leading to a single runway, is considered. The system allows for the automated determination of acceleration/deceleration of aircraft along the nominal air routes, as well as for the automated determination of path-stretching delay maneuvers. In addition to normal operating conditions, the system accommodates: (1) variable commanded separations over the outer marker to allow for takeoffs and between successive landings and (2) emergency conditions under which aircraft in distress have priority. The system design is based on a combination of three distinct optimal control problems involving a standard linear-quadratic problem, a parameter optimization problem, and a minimum-time rendezvous problem.

Athans, M.↗
NASA NTRS1980

OPDOT: A computer program for the optimum preliminary design of a transport airplane

A description of a computer program, OPDOT, for the optimal preliminary design of transport aircraft is given. OPDOT utilizes constrained parameter optimization to minimize a performance index (e.g., direct operating cost per block hour) while satisfying operating constraints. The approach in OPDOT uses geometric descriptors as independent design variables. The independent design variables are systematically iterated to find the optimum design. The technical development of the program is provided and a program listing with sample input and output are utilized to illustrate its use in preliminary design. It is not meant to be a user's guide, but rather a description of a useful design tool developed for studying the application of new technologies to transport airplanes.

Sliwa, S. M.↗
NASA NTRS2006

A Convex Guidance Algorithm for Formation Reconfiguration

In this paper, a reconfiguration guidance algorithm for formation flying spacecraft is presented. The formation reconfiguration guidance problem is first formulated as a continuous-time minimum-fuel or minimum-energy optimal control problem with collision avoidance and control constraints. The optimal control problem is then discretized to obtain a finite dimensional parameter optimization problem. In this formulation, the collision avoidance constraints are imposed via separating planes between each pair of spacecraft. A heuristic is introduced to choose these separating planes that leads to the convexification of the collision avoidance constraints. Additionally, convex constraints are imposed to guarantee that no collisions occur between discrete time samples. The resulting finite dimensional optimization problem is a second order cone program, for which standard algorithms can compute the global optimum with deterministic convergence and a prescribed level of accuracy. Consequently, the formation reconfiguration algorithm can be implemented onboard a spacecraft for real-time operations.

formation reconfiguration↗
NASA NTRS2019

Modeling Phenological Controls on Carbon Dynamics in Dryland Sagebrush Ecosystems

Dryland ecosystems play an important role in determining how precipitation anomalies affect terrestrial carbonfluxes at regional to global scales. Thus, to understand how climate change may affect the global carbon cycle,we must also be able to understand and model its effects on dryland vegetation. Dynamic Global VegetationModels (DGVMs) are an important tool for modeling ecosystem dynamics, but they often struggle to reproduceseasonal patterns of plant productivity. Because the phenological niche of many plant species is linked to bothtotal productivity and competitive interactions with other plants, errors in how process-based models representphenology hinder our ability to predict climate change impacts. This may be particularly problematic in drylandecosystems where many species have developed a complex phenology in response to seasonal variability in bothmoisture and temperature. Here, we examine how uncertainty in key parameters as well as the structure ofexisting phenology routines affect the ability of a DGVM to match seasonal patterns of leaf area index (LAI) andgross primary productivity (GPP) across a temperature and precipitation gradient. First, we optimized modelparameters using a combination of site-level eddy covariance data and remotely-sensed LAI data. Second, wemodified the model to include a semi-deciduous phenology type and added flexibility to the representation ofgrass phenology. While optimizing parameters reduced model bias, the largest gains in model performance wereassociated with the development of our new representation of phenology. This modified model was able to bettercapture seasonal patterns of both leaf area index (R2=0.75) and gross primary productivity (R2=0.84), thoughits ability to estimate total annual GPP depended on using eddy covariance data for optimization. The new modelalso resulted in a more realistic outcome of modeled competition between grass and shrubs. These findingsdemonstrate the importance of improving how DGVMs represent phenology in order to accurately forecastclimate change impacts in dryland ecosystems.

Ecosystem model Phenology Parameter optimization E↗
NASA NTRS1989

Robust computer-aided synthesis and optimization of linear multivariable control systems with varying plant dynamics via AUTOCON

AUTOCON is an automated computer-aided design tool for the synthesis and optimization of linear multivariable control systems based upon user-defined control parameter optimization. Violations in stability and performance requirements are computed from constraints on Single Input/Single Output (SISO) open- and closed-loop transfer function frequency responses, and from constraints on the singular-value frequency responses of Multiple Input/Multiple Output (MIMO) transfer functions, for all critical plant variations. Optimum nonlinear programming algorithms are used in the search for local constrained solutions in which violations in stability and performance are caused either to vanish or be minimized for a proper selection of the control parameters. Classical control system stability and performance design can, in this way, be combined with modern multivariable robustness methods to offer general frequency response loop-shaping via a computer-aided design tool. Complete Nichols, Nyquist, Bode, singular-value Bode magnitude and transient response plots are produced, including user-defined boundary responses. AUTOCON is used to synthesize and optimize the lateral/directional flight control system for a typical high-performance aircraft.

Lefkowitz, C. P.↗
NASA NTRS1972

Constrained optimal ascent-flyback shuttle trajectories.

An optimal Space Shuttle ascent-flyback trajectory shaping capability is presented which is based on the accelerated gradient parameter optimization technique. A typical atmospheric flight branched optimization problem is analyzed which required the determination of 31 parameters. This parameter set includes the description of the vehicle attitude control angles for three branches of Shuttle flight: first stage ascent, second stage ascent, and first stage flyback. The important in-flight inequality constraints required to maintain the integrity of the vehicle are considered. Results indicate that for a launch into a 55 deg inclined ellipse, a 13% increase in payload can be realized by using optimal control in the first-stage ascent rather than the conventional gravity-turn steering.

Kamm, J. L.↗
NASA NTRS1989

Optimal force distribution for payload positioning using a planar dual-arm robot

This paper presents a parameter optimization technique for deciding the force distribution on a payload being transported along a predetermined trajectory using two planar manipulator arms. The methodology begins by transforming the singular dynamics of two-arm transport to an ordinary set of differential equations and then proceeds to obtain a relation between the torques exerted by each arm. This relation is then used in a quadratic torque cost which is subsequently minimized to yield an optimal torque distribution. Significant savings in energy were found to occur when the arms were allowed to interact by transmission of forces through the payload. Even more significant are the savings found over one-arm transport of payloads where the arm torques are fixed by the prescribed trajectory.

Carignan, C. R.↗