Search NASA⌕ Search

SEARCH · Search NASA

Results for “Park model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Updated Available Drawdowns for Big Hill SPR Caverns - Model Including the Caprock Fault

This report updates the estimated values of the baseline available drawdowns for the caverns at the Big Hill storage facility, and an updated table listing the available drawdowns. An updated finite element numerical analysis model, which included a fault in the caprock layers, was constructed and the daily data of actual wellhead pressures and oil-brine interfaces was used. The number of available drawdowns for each of the Big Hill SPR caverns is estimated using the new model. All caverns are predicted to have five available drawdowns remaining from a geomechanical perspective. BH-101 and 105 have a region of concern at the floor edge and/or sloping floor, where tensile and dilatant stresses are predicted to occur during each workover. The tensile state is predicted to occur because of the geometries of the edge and floor. Therefore, geomechanical examination for two caverns would be recommended after a drawdown leach. The well integrity of each cavern is not investigated in this report. The estimates for the number of baseline available drawdowns are subject to change in the future as the knowledge of physical phenomena at the sites, and the further development of the models of geomechanical behavior at the sites, evolve over time.

02 PETROLEUM↗
NASA NTRS1980

Shock-tube studies of radiative base heating of Jovian probe

A 6.4-cm-diameter scale model of the Jovian entry vehicle is tested in an electric-arc-driven shock tube and a 5-cm-diameter sphere model is tested in a combustion-driven shock tube and in an electric-arc-driven shock tunnel. The radiative heat-transfer rate and pressure on the front and the base regions are measured in the absence of ablation with sensors imbedded in the models in a stream consisting of 10% hydrogen in a bath of either neon or argon. The measured radiative heat-transfer rates and pressures range to about 22 kW/sq cm and 12 atm, respectively, at the front stagnation point. The ratio of the radiative heat-transfer rate at the base stagnation point to that at the front stagnation point is found to be about 1/4 for the sphere at Mach 1.8, about 1/30 for the sphere at Mach 4.8, and about 1/6 for the scale model at Mach 1.7. The present experimental results agree well with the theoretical predictions of Park, thus indicating that Park's theory is valid.

Shirai, H.↗
DOE OSTI2026

Performance-Aligned LLMs for Generating Fast HPC Code

Optimizing scientific software is a difficult task because codebases are often large and complex, and performance can depend upon several factors including the algorithm, its implementation, and hardware among others. Causes of poor performance can originate from disparate sources and be difficult to diagnose. Recent years have seen a multitude of work that use large language models (LLMs) to assist in software development tasks. However, these tools are trained to model the distribution of code as text, and are not specifically designed to understand performance aspects of code. In this work, we introduce a reinforcement learning based methodology to align the outputs of code LLMs with performance. This allows us to build upon the current code modeling capabilities of LLMs and extend them to generate better performing code. Here, we demonstrate that our fine-tuned model improves the expected speedup of generated code over base models for a set of benchmark tasks from 0.9 to 1.6 for serial code and 1.9 to 4.5 for OpenMP parallel code.

Computer science↗
DOE OSTI2026

Interpretable Machine Learning for Characterizing Electric Vehicle Charging Behavior: Insights from Real-World Data

As electric vehicle (EV) adoption rises globally, concerns about the impact on aging electrical grids grow, particularly regarding the charging behavior of EV drivers. This study analyzes real-world driving and charging data from Ford battery electric vehicles (BEVs) collected between 2018 and 2019 to develop interpretable models that characterize charging behavior and quantify influencing factors. Prior research has relied on assumptions regarding driver behavior, often overlooking actual charging patterns. By employing generalized linear mixed models (GLMMs), this work offers insights into how various elements, such as next trip distance and state of charge (SOC), influence charging decisions. The dataset comprises over three million park-trip pairs from 1,997 vehicles, revealing that features related to driving behavior significantly dictate charging behavior, while infrastructure and regional factors have lesser impacts. The findings suggest that existing simulation models may oversimplify EV charging behavior assumptions. This work utilizes real-world EV driving and charging data to train interpretable models that describe charging behavior and quantify the factors most associated with how drivers use charging infrastructure. This research underscores the need for interpretable, data-driven methodologies to inform future EV infrastructure planning and grid management.

29 - ENERGY PLANNING, POLICY AND ECONOMY↗
NASA NTRS2006

Repeat Ground Track Lunar Orbits in the Full-Potential Plus Third-Body Problem

A high degree and order Lunar gravitational field is superimposed on the Earth-Moon Restricted Three Body model to capture the dominating forces on a spacecraft in the vicinity of the Moon. For the synchronously rotating Moon, periodic orbits in this model map repeat ground tracks and represent higher order solutions to the frozen orbit problem. The near-circular, stable or near-stable solutions are found over a wide range of defining characteristics making them suitable for long-lifetime parking applications such as science orbits, crew exploration vehicle parking orbits, and global coverage constellation orbits. A full ephemeris is considered for selected orbits to evaluate the validity of the time-invariant, simplified model. Of the most promising results are the low-altitude families of near-circular, inclined orbits that maintain long-term stability despite the highly non-spherical Lunar gravity. The method is systematic and enables rapid design and analysis of long-life orbits around any tidally-locked celestial body with an arbitrarily high degree and order spherical harmonic gravity field. .

periodic↗
DOE OSTI2022

Scale-invariant machine-learning model accelerates the discovery of quaternary chalcogenides with ultralow lattice thermal conductivity

We design an advanced machine-learning (ML) model based on crystal graph convolutional neural network that is insensitive to volumes (i.e., scale) of the input crystal structures to discover novel quaternary chalcogenides, AMM'Q 3 (A/M/M' = alkali, alkaline earth, post-transition metals, lanthanides, and Q = chalcogens). These compounds are shown to possess ultralow lattice thermal conductivity (κ l ), a desired requirement for thermal-barrier coatings and thermoelectrics. Upon screening the thermodynamic stability of ~1 million compounds using the ML model iteratively and performing density-functional theory (DFT) calculations for a small fraction of compounds, we discover 99 compounds that are validated to be stable in DFT. Taking several DFT-stable compounds, we calculate their κ l using Peierls–Boltzmann transport equation, which reveals ultralow κ l (<2 Wm -1 K -1 at room temperature) due to their soft elasticity and strong phonon anharmonicity. Our work demonstrates the high efficiency of scale-invariant ML model in predicting novel compounds and presents experimental-research opportunities with these new compounds.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Small, solubilized platinum nanocrystals consist of an ordered core surrounded by mobile surface atoms

In situ structures of Platinum (Pt) nanoparticles (NPs) can be determined with graphene liquid cell transmission electron microscopy. Atomic-scale three-dimensional structural information about their physiochemical properties in solution is critical for understanding their chemical function. We here analyze eight atomic-resolution maps of small (<3 nm) colloidal Pt NPs. Their structures are composed of an ordered crystalline core surrounded by surface atoms with comparatively high mobility. 3D reconstructions calculated from cumulative doses of 8500 and 17,000 electrons/pixel, respectively, are characterized in terms of loss of atomic densities and atomic displacements. Less than 5% of the total number of atoms are lost due to dissolution or knock-on damage in five of the structures analyzed, whereas 10–16% are lost in the remaining three. Less than 5% of the atomic positions are displaced due to the increased electron irradiation in all structures. The surface dynamics will play a critical role in the diverse catalytic function of Pt NPs and must be considered in efforts to model Pt NP function computationally.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Do Minihalos Affect Cosmic Reionization?

The role of unresolved structures (“minihalos”) in determining the consumption of ionizing photons during cosmic reionization remains an unsolved problem in modeling cosmic reionization, despite recent extensive studies with small-box high-resolution simulations by Park et al. and Chan et al., because the small-box studies are not able to fully sample all environments. In this paper these simulations are combined with large-box simulations from the “Cosmic Reionization On Computers” (CROC) project, allowing one to account for the full range of environments and to produce an estimate for the number of recombinations per hydrogen atom that are missed in large-scale simulations like CROC or Thesan. I find that recombinations in unresolved minihalos are unimportant compared to recombinations produced in large-scale cosmic structures and inside more massive, fully resolved halos. Since both the Park et al. and Chan et al. studies have severe limitations, the conclusions of this paper may need to be verified with more representative sets of small-box high-resolution simulations.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Statistical Estimation of EV Driver Charging Behavior and Influential Factors

INL received data collected via telematics from battery electric vehicles (BEVs), and these vehicles were owned by retail customers who had entered into a telematics user agreement. The goal of analyzing these data was to develop mathematical models to characterize how different sets of BEV drivers use charging infrastructure at home and away from home (i.e., public charging) and quantify how various factors influence BEV drivers’ decision to charge and use available infrastructure. The data used in this analysis are unique because they provide real world BEV driving and charging behavior at the individual driving and parking event level. In this study we seek to leverage this data to quantify BEV charging and driving metrics to help inform models that predict quantities like the specific times when loads are imposed on the electrical grid due to BEV charging. Most models that have been developed to predict electrical grid load due to BEV charging, use simulations of BEV driving events and rely on assumptions such as every vehicle charges every night. Using a statistical modelling framework, we seek to investigate BEV charging behavior and quantitatively assess these common assumptions of BEV charging behavior.

33 - ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2020

Ground Transportation at Airports: Ridehailing Uptake and Travel Shifts to Test Mode Choice Modeling Assumption

Ground transportation at airports poses a unique opportunity to understand mode shifts after introduction of ride-hailing services. Using five years of monthly transaction data for five modes (transit, parking, car rental, taxis, and ride-hailing) at the Seattle-Tacoma and Denver airports, this paper presents findings on how ride-hailing uptake impacts mode share for ground transportation trips to and from the airport. More specifically, the results explore how well the Independence of Irrelevant Alternatives facilitates estimation and forecasts prediction used in travel demand modeling for the uptake of new modes, as simply drawing from present modes in proportion to their existing shares.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
NASA NTRSDate not supplied

Monitoring Vegetation Health and Water Availability in Bryce Canyon National Park for Drought Stress Mitigation Planning

Bryce Canyon National Park is home to groundwater-dependent ecosystems (GDEs) that are threatened by a multidecadal drought and increased groundwater extraction due to a spike in tourism. These ecosystems contain unique species that are only found in areas where near-surface groundwater is present, such as aspen groves and willows. GDEs contribute to the high biodiversity found in Bryce Canyon, which boosts an ecosystem’s productivity and increases the overall ecological health of the park. Unfortunately, many GDEs in this area are too small to identify with traditional Earth observation platforms and are difficult to physically reach for identification and monitoring. NASA DEVELOP partnered with the National Park Service to establish a framework that both identified and assessed the health of GDEs within Bryce Canyon from 2013–2022. The team used high-resolution PlanetScope and Landsat 8 Operational Land Imager (OLI) to map springs, seeps, and GDEs. Modeled data from the Western Land Data Assimilation System (WLDAS) and in situ precipitation data were used to produce time series of climatic variables for the National Park Service to gain an understanding of how the GDEs are changing with the ongoing drought. This study is essential to the goal of the National Park Service to conserve the health of these GDEs.

Aaron Carr↗
DOE OSTI2026

Deep learning-assisted modeling for χ (2) nonlinear optics

Modeling second-order (χ(2)) nonlinear optical processes remains computationally expensive due to the need to resolve fast field oscillations and simulate wave propagation using methods such as the split-step Fourier method (SSFM). This can become a bottleneck in real-time applications, such as high-repetition-rate laser systems requiring rapid feedback and control. We present a long short-term memory-based surrogate model trained on SSFM simulations generated from a start-to-end model of the photocathode drive laser at SLAC National Accelerator Laboratory’s Linac Coherent Light Source II. The model achieves over 250× speedup while maintaining high fidelity, enabling future real-time optimization and laying the foundation for data-integrated modeling frameworks and digital twins of laser systems.

Accelerator Physics (physics.acc-ph)↗
DOE OSTI2023

Investigation of performance enhancement by balanced double-null shaping in KSTAR

We report experimental observations on the effect of plasma boundary shaping towards balanced double-null (DN) configuration on the plasma performance in KSTAR. The transition from a single-null to a DN configuration resulted in improved plasma performance, manifested through changes in the pedestal region, decreased density, and core MHD activity variation. Specifically, the DN transition led to a wider and higher pedestal structure, accompanied by grassy edge-localized modes (ELMs) characteristics. The density decrease was a prerequisite for performance enhancement during DN shaping, increasing fast ion confinement. Optimizing the plasma near the core region was associated with the suppression of sawtooth instabilities and the occurrence of fishbone modes during the DN transition. Integrated modeling demonstrated that secondary effects of the DN shaping could increase core thermal energy confinement.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Direct observations and characterization of crack closure during microstructurally small fatigue crack growth via in-situ high-energy X-ray characterization

This study provides direct observation of the crack closure mechanism of a naturally occurring, tortuous, 3D microstructurally small fatigue crack (SFC) in additively manufactured Inconel 718. In-situ non-destructive characterization is performed using high-energy X-ray diffraction techniques to capture the evolution of the 3D microstructure and micromechanical response in the vicinity of the crack front. Based on the stress state of twelve grains analyzed at the crack tip, the crack closure events of the SFC front was found to be spatially heterogeneous with respect to loading progression governed by the local stress state of the grains (specifically the stress reversal from compression to tension). From this analysis, three grains that displayed different degrees of crack closure were further investigated, based on the orientation of the crack relative to the grains and the associated modality of crack growth. The stress normal to the crack plane and the associated degree of Mode I crack behavior were correlated with events of the crack opening earlier during the loading cycle. This was further corroborated by diffraction spot spreading analysis that quantified the crystallographic lattice distortion caused by the opening crack. Additionally, the detailed characterization of the opening behavior of the grains located at the crack tip and their associated states of stress elucidates the mechanism governing crack closure and will inform future modeling efforts of this phenomenon.

36 MATERIALS SCIENCE↗