Search NASA⌕ Search

SEARCH · Search NASA

Results for “Particle Systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Methods and systems for producing nanolipoprotein particles

Provided herein are methods and systems for the production of a nanolipoprotein particle (NLP) that includes a scaffold protein a membrane forming lipid and optionally a target protein. At least one of the scaffold protein and target protein can be provided through an IVT system. The membrane forming lipid, scaffold protein and optionally the target protein can be assembled for a time and under conditions that allow obtaining high yield NLPs, NPLs with an increased solubility, an NLP of a controlled size, and/or an NLP having a size predetermined to include a pre-selected target protein.

Coleman, Matthew A.↗
DOE OSTI2024

Ultra-High-Sensitivity Aerosol Spectrometer (UHSAS) Instrument Handbook

The Ultra-High-Sensitivity Aerosol Spectrometer (UHSAS) (Figure 1) is an optical-scattering, laser-based aerosol particle spectrometer system for sizing particles in the 60 to 1000 nanometer (nm) range [1–3]. The instrument counts particles in up to 100 user-specified sizing bins. The instrument’s laser illuminates particles, which scatter light. The system captures the peak light signals that are generated. These signals are used for particle sizing, since the amount of light scattered correlates strongly with particle size.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2001

Lithography using quantum entangled particles

A system of etching using quantum entangled particles to get shorter interference fringes. An interferometer is used to obtain an interference fringe. N entangled photons are input to the interferometer. This reduces the distance between interference fringes by n, where again n is the number of entangled photons.

Williams, Colin↗
NASA NTRS2003

Lithography using quantum entangled particles

A system of etching using quantum entangled particles to get shorter interference fringes. An interferometer is used to obtain an interference fringe. N entangled photons are input to the interferometer. This reduces the distance between interference fringes by n, where again n is the number of entangled photons.

Williams, Colin↗
NASA NTRS2003

Lithography using quantum entangled particles

A system of etching using quantum entangled particles to get shorter interference fringes. An interferometer is used to obtain an interference fringe. N entangled photons are input to the interferometer. This reduces the distance between interference fringes by n, where again n is the number of entangled photons.

Williams, Colin↗
DOE OSTI2020

High Temperature Abrasion Erosion Testing for Particle Based CSP Systems

In this work, we demonstrate an experimental setup that would allow us to individually control each variable that could influence abrasion erosion. Subsequently, Abrasion measurements were performed for three different candidate substrate materials at low particle velocities and both low and high temperatures.

14 SOLAR ENERGY↗
NASA NTRS1996

On the Growth of Ternary System HNO3/H2SO4/H2O Aerosol Particles in the Stratosphere

We present a study of the growth of ternary solution (nitric acid, sulfuric acid and water) droplets in the stratosphere. The growth mechanism is hetero-molecular condensation in which the particle is assumed to be in equilibrium with environmental water vapor. Model results are in reasonable agreement with the averaged extinction ratio obtained by the SAM II satellite system.

Hamill, Patrick↗
DOE OSTI2020

Experimental Testing of Particle Erosion and Attrition in CSP Systems

In CSP systems using solid particles for heat transfer, erosion from the falling particles can damage the system components upon impact, and from sliding against the component walls. Furthermore, the resulting attrition of particles can change the thermal performance due to alterations in particle morphology. The research on these issues has been limited to industrial applications, and don’t necessarily coincide with the operating conditions in CSP systems. In this work, we investigated the durability of the particles selected as the heat transfer media, as well as special substrate materials that are of interest as lining materials to the particle storage tanks and hoppers. Three different erosion phenomena were studied: impact, abrasion, and attrition erosion. The low-temperature experiments revealed negligible losses from attrition and abrasion erosion. Although the substrates indicated visible surface damage from impact erosion, the actual material mass loss was small even after a throughput of 500kg of particles 63 days of 1MW CSP plant operation assuming 14 hours per day of operation. Erosion is typically classified as impact, abrasion, or attrition erosion. For example, the CSP systems utilizing solid particles as heat transfer media will likely experience impact erosion on the receiver hopper and heat exchanger walls as the solid particles fall from the reservoir. Additionally, there will be sliding erosion along the receiver walls as particles move through the hopper, and lastly, there will also be attrition erosion as the particles rub against each other. The extent of erosion depends on many factors including but not limited to particle shape and size, material hardness/brittleness and ductility, and particle impact speed and angle. Mechanistic erosion equations that are available in the literature are mostly derived from data pertaining to specific experiments and therefore can’t be applied to all applications without suitable adjustments. Survey of the literature relating to particle-based receivers revealed that the most prevalent approach has been to choose low velocities to limit erosion, but to our knowledge, little effort has been put in to fully characterize erosion at the expected operating conditions. A relatively recent work investigated the erosion of wire mesh proposed for use in a particle receiver, where the results actually showed an increase in mass as oxidation occurred on the mesh surface but the work did not investigate the particle attrition rate, and the erosion rate of a solid substrate. The end goal of this work is to develop a comprehensive particle and substrate durability model that will allow a comprehensive understanding of particle-based CSP operating conditions on component durability.

14 SOLAR ENERGY↗
NASA NTRS1989

Ballistic transport in planetary ring systems due to particle erosion mechanisms. I - Theory, numerical methods, and illustrative examples

Ballistic transport, defined as the net radial transport of mass and angular momentum due to exchanges of meteoroid hypersonic-impact ejecta by neighboring planetary ring regions on time-scales orders-of-magnitude shorter than the age of the solar system, is presently considered as a problem in mathematical physics. The preliminary results of a numerical scheme for following the combined effects of ballistic transport and viscous diffusion demonstrate that ballistic transport generates structure near sharp edges already present in the ring-mass distribution; the entire ring system ultimately develops an undulatory structure whose length scale is typically of the order of the radial excursion of the impact ejecta.

Durisen, Richard H.↗
DOE OSTI2026

Recursive algorithm for constructing antisymmetric fermionic states in first quantization mapping

We devise a deterministic quantum algorithm to produce antisymmetric states of single-particle orbitals in the first quantization mapping. Unlike sorting-based antisymmetrization algorithms, which require ordered input states and high Clifford-gate overhead, our approach initializes the state of each particle independently. For a system of $η$ particles and $N$ single-particle states, our algorithm prepares antisymmetrized states of non-trivial localized (e.g., Hartree-Fock) orbitals using $O(η^2\sqrt{N})$ $T$-gates, outperforming alternative algorithms when $η ≲ \sqrt{N}$. To achieve such scaling, we require $O(\sqrt{N})$ dirty ancilla qubits for intermediate calculations. Knowledge of the single-particle states to be antisymmetrized can be leveraged to further improve the efficiency of the circuit, and a measurement-based variant reduces gate cost by roughly a factor of two. We show example circuits for two- and three-particle systems and discuss the generalization to an arbitrary number of particles. For a specific three-particle example, we decompose the circuit into Clifford $+T$ gates and study the impact of noise on the prepared state.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS2016

Coordinates Analyses of Hydrated Interplanetary Dust Particles: Samples of Primitive Solar System Bodies

Interplanetary dust particles (IDPs) collected in the stratosphere fall into two major groups: an anhydrous group termed the "chondritic-porous (CP) IDPs and a hydrated group, the "chondritic-smooth (CS) IDPs, although rare IDPs with mineralogies intermediate between these two groups are known [1]. The CP-IDPs are widely believed to be derived from cometary sources [e.g. 2]. The hydrated CS-IDPs show mineralogical similarities to heavily aqueously altered carbonaceous chondrites (e.g. CI chondrites), but only a few have been directly linked to carbonaceous meteorite parent bodies [e.g. 3, 4]. Most CS-IDPs show distinct chemical [5] and oxygen isotopic composition differences [6-8] from primitive carbonaceous chondrites. Here, we report on our coordinated analyses of a suite of carbon-rich CS-IDPs focusing on their bulk compositions, mineralogy, mineral chemistry, and isotopic compositions.

Keller, L. P.↗
DOE OSTI2023

Transient pattern formation in an active matter contact poisoning model

Abstract One of the most notable features in repulsive particle based active matter systems is motility-induced-phase separation (MIPS) where a dense, often crystalline phase and low density fluid coexist. Most active matter studies involve time-dependent activity; however, there are many active systems where individual particles transition from living or moving to dead or nonmotile due to lack of fuel, infection, or poisoning. Here we consider an active matter particle system at densities where MIPS does not occur. When we add a small number of infected particles that can poison other particles, rendering them nonmotile, we find a rich variety of time dependent pattern formation, including MIPS, a wetting phase, and a fragmented state formed when mobile particles plow through a nonmotile packing. We map the patterns as a function of time scaled by epidemic duration, and show that the pattern formation is robust for a wide range of poisoning rates and activity levels. We also show that pattern formation does not occur in a random death model, but requires the promotion of nucleation by contact poisoning. Our results should be relevant to biological and active matter systems where there is some form of poisoning, death, or transition to nonmotility.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS2018

Particle Size Calibration Testing in the NASA Propulsion Systems Laboratory

The particle size characterization portion of the 2017 Propulsion Systems Laboratory (PSL) Cloud Calibration is described. The work focuses on characterizing the particle size distribution of the icing cloud as a function of simulated atmospheric conditions.These results will aid in upcoming ice crystal and supercooled liquid icing tests in PSL. Measurements acquired with the Phase Doppler Interferometer and High Speed Imaging instruments are presented. Experimental results indicate that the particle size distribution is primarily a function nozzle air and water pressures, and that air speed is not a significant effect for ice crystal clouds in PSL and both thermodynamic conditions and air speed are not significant effects for supercooled liquid water clouds in PSL.

Engine icing↗
NASA NTRS2019

Particle Size Calibration Testing in the NASA Propulsion Systems Laboratory

The particle size characterization portion of the 2017 Propulsion Systems Laboratory (PSL) Cloud Calibration is described. The work focuses on characterizing the particle size distribution of the icing cloud as a function of simulated atmospheric conditions.These results will aid in upcoming ice crystal and supercooled liquid icing tests in PSL. Measurements acquired with the Phase Doppler Interferometer and High Speed Imaging instruments are presented. Experimental results indicate that the particle size distribution is primarily a function nozzle air and water pressures, and that air speed is not a significant effect for ice crystal clouds in PSL and both thermodynamic conditions and air speed are not significant effects for supercooled liquid water clouds in PSL.

Engine Icing↗
DOE OSTI2022

Application of Convolutional and Feedforward Neural Networks for Fault Detection in Particle Accelerator Power Systems

High voltage converter modulators (HVCM) provide power to the accelerating cavities of the spallation neutron source (SNS) facility. HVCM experience catastrophic failures, which increase the downtime of the SNS and reduce beam time. The faults may occur due to different reasons including failures of the resonant capacitor, core saturation due to the magnetic flux, insulated-gate bipolar transistor (IGBT) failures, and others. We recently have setup a HVCM test stand to develop and test machine learning models for anomaly detection and fault prognostics. In this work, we propose binary classifiers and autoencoder architectures based on convolutional (CNN) and feedforward neural networks (FNN) to facilitate distinguishing normal from faulty waveforms coming from the HVCM during operation. The results indicate that the CNN binary classifier is the best model among the four showing very stable performance in the training and testing sets with impressive metrics of precision and recall reaching up to 99\% with a very small uncertainty. The FNN classifier shows the least performance with a large uncertainty in its metrics. The performances of the two autoencoders based on CNN and FNN were in between, showing very good performance nonetheless.

Radaideh, Majdi↗